| 1. |
- Buker, O., et al.
(författare)
-
Metrological support for LNG custody transfer and transport
- 2016
-
Ingår i: Proceedings of the 17th International Flow Measurement Conference (FLOMEKO 2016).
-
Konferensbidrag (refereegranskat)abstract
- In the framework of the ongoing EMRP Joint Research Project (JRP) ENG 60 “Metrology for LNG” (2014-2017), co-funded by the European Union, a number of metrological challenges associated with custody transfer and transport of LNG will be faced. The project consists of four technical work packages (WP), whereby the main objective is to reduce the measurement uncertainty of LNG custody transfer by a factor two. The focus in WP1 is the design and development of a traceable mid-scale calibration standard for LNG mass and volume flow. The goal is to provide traceable mass and volume flow calibrations up to 400 m3/h (180000 kg/h). In WP2, the emphasis is on the development and validation of a LNG sampling and composition measurement reference standard, consisting of sampler, vaporizer, gas standards, and gas chromatography (GC), which will be used to test and calibrate commercially available LNG sampling and composition measurement systems. The priority in WP3 is given to the development and validation of a method for the determination of the methane number, including correlations based on the LNG composition and corrections for traces of nitrogen and higher hydrocarbons. Since physical properties and quantities play an important role in LNG custody transfer, WP4 comprises reference quality density measurements of LNG to validate and improve models for LNG density predictions, the uncertainty evaluation of enthalpy and calorific value calculations and the development of a novel cryogenic sensor for the simultaneous measurement of speed-of-sound and density. The present paper gives an overview of recently achieved objectives within the project and provides an outlook to future activities.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Bayrak Pehlivan, Ilknur, et al.
(författare)
-
The climatic response of thermally integrated photovoltaic-electrolysis water splitting using Si and CIGS combined with acidic and alkaline electrolysis
- 2020
-
Ingår i: Sustainable Energy & Fuels. - : ROYAL SOC CHEMISTRY. - 2398-4902. ; 4:12, s. 6011-6022
-
Tidskriftsartikel (refereegranskat)abstract
- The Horizon 2020 project PECSYS aims to build a large area demonstrator for hydrogen production from solar energy via integrated photovoltaic (PV) and electrolysis systems of different types. In this study, Si- and CIGS-based photovoltaics are developed together with three different electrolyzer systems for use in the corresponding integrated devices. The systems are experimentally evaluated and a general model is developed to investigate the hydrogen yield under real climatic conditions for various thin film and silicon PV technologies and electrolyser combinations. PV characteristics using a Si heterojunction (SHJ), thin film CuInxGa1-xSe2, crystalline Si with passivated emitter rear totally diffused and thin film Si are used together with temperature dependent catalyst load curves from both acidic and alkaline approaches. Electrolysis data were collected from (i) a Pt-IrO2-based acidic electrolysis system, and (ii) NiMoW-NiO-based and (iii) Pt-Ni foam-based alkaline electrolysis systems. The calculations were performed for mid-European climate data from Julich, Germany, which will be the installation site. The best systems show an electricity-to-hydrogen conversion efficiency of 74% and over 12% solar-to-hydrogen (STH) efficiencies using both acidic and alkaline approaches and are validated with a smaller lab scale prototype. The results show that the lower power delivered by all the PV technologies under low irradiation is balanced by the lower demand for overpotentials for all the electrolysis approaches at these currents, with more or less retained STH efficiency over the full year if the catalyst area is the same as the PV area for the alkaline approach. The total yield of hydrogen, however, follows the irradiance, where a yearly hydrogen production of over 35 kg can be achieved for a 10 m(2) integrated PV-electrolysis system for several of the PV and electrolyser combinations that also allow a significant (100-fold) reduction in necessary electrolyser area for the acidic approach. Measuring the catalyst systems under intermittent and ramping conditions with different temperatures, a 5% lowering of the yearly hydrogen yield is extracted for some of the catalyst systems while the Pt-Ni foam-based alkaline system showed unaffected or even slightly increased yearly yield under the same conditions.
|
|
| 5. |
|
|
| 6. |
- Jarfors, Anders E.W. 1963-, et al.
(författare)
-
Build strategy and impact strength of slm produced maraging steel (1.2709)
- 2021
-
Ingår i: Metals. - : MDPI. - 2075-4701. ; 11:1, s. 1-20
-
Tidskriftsartikel (refereegranskat)abstract
- The current paper aimed to study the impact properties of additively manufactured maraging steel (1.2709) using laser powder bed fusion (PBF-L) processing. The specimens were fabricated using 3D Systems ProX 300 equipment under constant specific power input, or Andrew number. The interactions between the build strategy and parameters such as hatch spacing and scan speed was, and the impact strength and fracture were investigated. The impact energy anisotropy was also investigated in parallel and perpendicular to the build direction. Instrumented impact testing was performed, and the fractography supported that the fusion zone geometry dictated the fracture behavior. The influence from gaseous elements such as nitrogen, oxygen, and hydrogen was found insignificant at the levels found in the printed material.
|
|
| 7. |
|
|
| 8. |
- Keller, Jan, et al.
(författare)
-
On the Paramount Role of Absorber Stoichiometry in (Ag,Cu)(In,Ga)Se2 Wide‐Gap Solar Cells
- 2020
-
Ingår i: Solar RRL. - : Wiley. - 2367-198X. ; 4:12
-
Tidskriftsartikel (refereegranskat)abstract
- This contribution evaluates the effect of absorber off‐stoichiometry in wide‐gap (Ag,Cu)(In,Ga)Se2 (ACIGS) solar cells. It is found that ACIGS films show an increased tendency to form ordered vacancy compounds (OVCs) with increasing Ga and Ag contents. Very little tolerance to off‐stoichiometry is detected for absorber compositions giving the desired properties of 1) an optimum bandgap (EG) for a top cell in tandem devices (EG = 1.6–1.7 eV) and at the same time 2) a favorable band alignment with a CdS buffer layer. Herein, massive formation of either In‐ or Ga‐enriched OVC patches is found for group I‐poor ACIGS. As a consequence, carrier transport and charge collection are significantly impeded in corresponding solar cells. The transport barrier appears to be increasing with storage time, questioning the long‐term stability of wide‐gap ACIGS solar cells. Furthermore, the efficiency of samples with very high Ga and Ag contents depends on the voltage sweep direction. It is proposed that the hysteresis behavior is caused by a redistribution of mobile Na ions in the 1:1:2 absorber lattice upon voltage bias. Finally, a broader perspective on OVC formation in the ACIGS system is provided and fundamental limitations for wide‐gap ACIGS solar cells are discussed.
|
|
| 9. |
|
|
| 10. |
|
|
