| 1. |
- Backs, Alex, et al.
(författare)
-
Development and first results of a magnetic sample environment for polarized neutron imaging of thin metal sheets
- 2023
-
Ingår i: EPJ Web of Conferences. - 2100-014X. ; 286
-
Tidskriftsartikel (refereegranskat)abstract
- Polarized neutron imaging brings the great advantage of analyzing bulk magnetic properties with good spatial resolution. The technique is based on the interaction of the neutron spin with magnetic samples or free magnetic fields and observing the changes to a spin-polarized neutron beam. The high sensitivity to even small magnetic fields is a benefit in obtaining magnetization information but simultaneously a challenge in instrumentation, since magnetic environments for the polarized neutron beam and for the sample, as well as the fringe field from the magnetic sample itself all affect the measurement and can give rise to unwanted effects. We have used finite element simulations and ray tracing simulations, to design and analyze a magnetic sample environment devised for the measurement of ferromagnetic metal sheets. Here we show an analysis of performance of the experimental setup based on the simulation results and compare them to first experimental results on a grain oriented silicon steel sample.
|
|
| 2. |
- Benetti, Ana R, et al.
(författare)
-
How mobile are protons in the structure of dental glass ionomer cements?
- 2015
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- The development of dental materials with improved properties and increased longevity can save costs and minimize discomfort for patients. Due to their good biocompatibility, glass ionomer cements are an interesting restorative option. However, these cements have limited mechanical strength to survive in the challenging oral environment. Therefore, a better understanding of the structure and hydration process of these cements can bring the necessary understanding to further developments. Neutrons and X-rays have been used to investigate the highly complex pore structure, as well as to assess the hydrogen mobility within these cements. Our findings suggest that the lower mechanical strength in glass ionomer cements results not only from the presence of pores, but also from the increased hydrogen mobility within the material. The relationship between microstructure, hydrogen mobility and strength brings insights into the material's durability, also demonstrating the need and opening the possibility for further research in these dental cements.
|
|
| 3. |
- Betz, B, et al.
(författare)
-
Quantification of the sensitivity range in neutron dark-field imaging.
- 2015
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 1089-7623 .- 0034-6748. ; 86:12
-
Tidskriftsartikel (refereegranskat)abstract
- In neutron grating interferometry, the dark-field image visualizes the scattering properties of samples in the small-angle and ultra-small-angle scattering range. These angles correspond to correlation lengths from several hundred nanometers up to several tens of micrometers. In this article, we present an experimental study that demonstrates the potential of quantitative neutron dark-field imaging. The dark-field signal for scattering from different particle sizes and concentrations of mono-dispersive polystyrene particles in aqueous solution is compared to theoretical predictions and the good agreement between measurements and calculations underlines the quantitative nature of the measured values and reliability of the technique with neutrons.
|
|
| 4. |
- Cereser, Alberto, et al.
(författare)
-
Time-of-Flight Three Dimensional Neutron Diffraction in Transmission Mode for Mapping Crystal Grain Structures
- 2017
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- The physical properties of polycrystalline materials depend on their microstructure, which is the nano- to centimeter scale arrangement of phases and defects in their interior. Such microstructure depends on the shape, crystallographic phase and orientation, and interfacing of the grains constituting the material. This article presents a new non-destructive 3D technique to study centimeter-sized bulk samples with a spatial resolution of hundred micrometers: time-of-flight three-dimensional neutron diffraction (ToF 3DND). Compared to existing analogous X-ray diffraction techniques, ToF 3DND enables studies of samples that can be both larger in size and made of heavier elements. Moreover, ToF 3DND facilitates the use of complicated sample environments. The basic ToF 3DND setup, utilizing an imaging detector with high spatial and temporal resolution, can easily be implemented at a time-of-flight neutron beamline. The technique was developed and tested with data collected at the Materials and Life Science Experimental Facility of the Japan Proton Accelerator Complex (J-PARC) for an iron sample. We successfully reconstructed the shape of 108 grains and developed an indexing procedure. The reconstruction algorithms have been validated by reconstructing two stacked Co-Ni-Ga single crystals, and by comparison with a grain map obtained by post-mortem electron backscatter diffraction (EBSD).
|
|
| 5. |
- Fedrigo, Anna, et al.
(författare)
-
VESPA : The vibrational spectrometer for the European Spallation Source
- 2016
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 0034-6748 .- 1089-7623. ; 87:6
-
Tidskriftsartikel (refereegranskat)abstract
- VESPA, Vibrational Excitation Spectrometer with Pyrolytic-graphite Analysers, aims to probe molecular excitations via inelastic neutron scattering. It is a thermal high resolution inverted geometry time-of-flight instrument designed to maximise the use of the long pulse of the European Spallation Source. The wavelength frame multiplication technique was applied to provide simultaneously a broad dynamic range (about 0-500 meV) while a system of optical blind choppers allows to trade flux for energy resolution. Thanks to its high flux, VESPA will allow the investigation of dynamical and in situ experiments in physical chemistry. Here we describe the design parameters and the corresponding McStas simulations.
|
|
| 6. |
- Garvey, C. J., et al.
(författare)
-
Small angle neutron scattering on an absolute intensity scale and the internal surface of diatom frustules from three species of differing morphologies
- 2013
-
Ingår i: European Biophysics Journal. - : Springer Science and Business Media LLC. - 0175-7571 .- 1432-1017. ; 42:5, s. 395-404
-
Tidskriftsartikel (refereegranskat)abstract
- The internal nanostructure of the diatoms Cyclotella meneghiniana, Seminavis robusta and Achnanthes subsessilis was investigated using small angle neutron scattering (SANS) to examine thin biosilica samples, consisting of isotropic (powder) from their isolated cell walls. The interpretation of SANS data was assisted by several other measurements. The N-2 adsorption, interpreted within the Branuer-Emmet-Teller isotherm, yielded the specific surface area of the material. Fourier transform infrared (FTIR) and Raman spectroscopy indicates that the isolated material is amorphous silica with small amounts of organic cell wall materials acting as a filling material between the silica particles. A two-phase (air and amorphous silica) model was used to interpret small angle neutron scattering data. After correction for instrumental resolution, the measurements on two SANS instruments covered an extended range of scattering vectors 0.0011 nm(-1) < q < 5.6 nm(-1), giving an almost continuous SANS curve over a range of scattering vectors, q, on an absolute scale of intensity for each sample. Each of the samples gave a characteristic scattering curve where log (intensity) versus log (q) has a -4 dependence, with other features superimposed. In the high-q regime, departure from this behaviour was observed at a length-scales equivalent to the proposed unitary silica particle. The limiting Porod scattering law was used to determine the specific area per unit of volume of each sample illuminated by the neutron beam. The Porod behaviour, and divergence from this behaviour, is discussed in terms of various structural features and the proposed mechanisms for the bio-assembly of unitary silica particles in frustules.
|
|
| 7. |
- Harti, Ralph P., et al.
(författare)
-
Visibility simulation of realistic grating interferometers including grating geometries and energy spectra
- 2017
-
Ingår i: Optics Express. - 1094-4087. ; 25:2, s. 1019-1029
-
Tidskriftsartikel (refereegranskat)abstract
- The performance of X-ray and neutron grating interferometers is characterised by their visibility, which is a measure for the maximum achievable contrast. In this study we show how the real grating geometry in a grating interferometer with three gratings impacts the interference and self projection that leads to visibility in the first place. We quantify the individual contributions of wavelength distributions and grating shapes in terms of visibility reduction by determining the absolute as well as relative effect of each contribution. The understanding of the impact of changed geometry and wavelength distributions on the interference of neutrons/X-rays allows us to present the first fully quantitative model of a grating interferometer setup. We demonstrate the capability of the simulation framework by building a model of the neutron grating interferometer at the ICON beamline and directly comparing simulated and measured visibility values. The general nature of the model makes it possible to extend it to any given grating interferometer for both X-rays and neutrons.
|
|
| 8. |
- Hilger, A., et al.
(författare)
-
Neutron guide optimisation for a time-of-flight neutron imaging instrument at the European Spallation Source
- 2015
-
Ingår i: Optics Express. - 1094-4087. ; 23:1, s. 301-311
-
Tidskriftsartikel (refereegranskat)abstract
- A neutron transport system for the planned imaging instrument ODIN at the future European Spallation Source (ESS) based on neutron optical components was designed and optimized. Different ways of prompt pulse suppression were studied. The spectral performance of the optimal neutron guide configuration is presented. In addition, the influence of the gaps in the guide system needed for the required chopper configuration was investigated. Given that the requirements for an imaging instrument located on a long guide system and hosting a complex chopper system are extremely demanding in terms of spectral and divergence needs, this study can be beneficial for a wide range of instruments in various ways. (C) 2015 Optical Society of America
|
|
| 9. |
- Maimaitiyili, Tuerdi, et al.
(författare)
-
Residual Lattice Strain and Phase Distribution in Ti-6Al-4V Produced by Electron Beam Melting
- 2019
-
Ingår i: Materials. - : MDPI. - 1996-1944. ; 12:4
-
Tidskriftsartikel (refereegranskat)abstract
- Residual stress/strain and microstructure used in additively manufactured material are strongly dependent on process parameter combination. With the aim to better understand and correlate process parameters used in electron beam melting (EBM) of Ti-6Al-4V with resulting phase distributions and residual stress/strains, extensive experimental work has been performed. A large number of polycrystalline Ti-6Al-4V specimens were produced with different optimized EBM process parameter combinations. These specimens were post-sequentially studied by using high-energy X-ray and neutron diffraction. In addition, visible light microscopy, scanning electron microscopy (SEM) and electron backscattered diffraction (EBSD) studies were performed and linked to the other findings. Results show that the influence of scan speed and offset focus on resulting residual strain in a fully dense sample was not significant. In contrast to some previous literature, a uniform α- and β-Ti phase distribution was found in all investigated specimens. Furthermore, no strong strain variations along the build direction with respect to the deposition were found. The magnitude of strain in α and β phase show some variations both in the build plane and along the build direction, which seemed to correlate with the size of the primary β grains. However, no relation was found between measured residual strains in α and β phase. Large primary β grains and texture appear to have a strong effect on X-ray based stress results with relatively small beam size, therefore it is suggested to use a large beam for representative bulk measurements and also to consider the prior β grain size in experimental planning, as well as for mathematical modelling.
|
|
| 10. |
- Makowska, Małgorzata, et al.
(författare)
-
Flexible sample environment for high resolution neutron imaging at high temperatures in controlled atmosphere.
- 2015
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 1089-7623 .- 0034-6748. ; 86:12
-
Tidskriftsartikel (refereegranskat)abstract
- High material penetration by neutrons allows for experiments using sophisticated sample environments providing complex conditions. Thus, neutron imaging holds potential for performing in situ nondestructive measurements on large samples or even full technological systems, which are not possible with any other technique. This paper presents a new sample environment for in situ high resolution neutron imaging experiments at temperatures from room temperature up to 1100 °C and/or using controllable flow of reactive atmospheres. The design also offers the possibility to directly combine imaging with diffraction measurements. Design, special features, and specification of the furnace are described. In addition, examples of experiments successfully performed at various neutron facilities with the furnace, as well as examples of possible applications are presented. This covers a broad field of research from fundamental to technological investigations of various types of materials and components.
|
|
