| 1. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 2. |
- Bhat, Goutam, et al.
(författare)
-
NTIRE 2022 Burst Super-Resolution Challenge
- 2022
-
Ingår i: 2022 IEEE/CVF CONFERENCE ON COMPUTER VISION AND PATTERN RECOGNITION WORKSHOPS (CVPRW 2022). - : IEEE. - 9781665487399 - 9781665487405 ; , s. 1040-1060
-
Konferensbidrag (refereegranskat)abstract
- Burst super-resolution has received increased attention in recent years due to its applications in mobile photography. By merging information from multiple shifted images of a scene, burst super-resolution aims to recover details which otherwise cannot be obtained using a simple input image. This paper reviews the NTIRE 2022 challenge on burst super-resolution. In the challenge, the participants were tasked with generating a clean RGB image with 4x higher resolution, given a RAW noisy burst as input. That is, the methods need to perform joint denoising, demosaicking, and super-resolution. The challenge consisted of 2 tracks. Track 1 employed synthetic data, where pixel-accurate high-resolution ground truths are available. Track 2 on the other hand used real-world bursts captured from a handheld camera, along with approximately aligned reference images captured using a DSLR. 14 teams participated in the final testing phase. The top performing methods establish a new state-of-the-art on the burst super-resolution task.
|
|
| 3. |
- Cohen, David, 1977, et al.
(författare)
-
Exponential integrators for stochastic Maxwell's equations driven by Itô noise
- 2020
-
Ingår i: Journal of Computational Physics. - : Elsevier BV. - 1090-2716 .- 0021-9991. ; 410
-
Tidskriftsartikel (refereegranskat)abstract
- This article presents explicit exponential integrators for stochastic Maxwell's equations driven by both multiplicative and additive noises. By utilizing the regularity estimate of the mild solution, we first prove that the strong order of the numerical approximation is [Formula presented] for general multiplicative noise. Combining a proper decomposition with the stochastic Fubini's theorem, the strong order of the proposed scheme is shown to be 1 for additive noise. Moreover, for linear stochastic Maxwell's equation with additive noise, the proposed time integrator is shown to preserve exactly the symplectic structure, the evolution of the energy as well as the evolution of the divergence in the sense of expectation. Several numerical experiments are presented in order to verify our theoretical findings.
|
|
| 4. |
- Li, Hezhen, et al.
(författare)
-
Asynchronous densification of zirconia ceramics formed by stereolithographic additive manufacturing
- 2021
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier BV. - 0955-2219 .- 1873-619X. ; 41:8, s. 4666-4670
-
Tidskriftsartikel (refereegranskat)abstract
- Stereolithography has been proven as a feasible approach to make crack-free ceramic macrostructure with customized designs, but the microstructure, especially pore structure remains to be tailored more precisely for better performance, where the sintering protocol and related densification characteristics could play a vital role as the slurry preparation and debinding protocol do. Herein we report a phenomenon named “asynchronous densification”, that is, the surface region of zirconia ceramics formed by stereolithographic additive manufacturing would be densified prior to the bulk at 1200°C during the conventional pressureless sintering in air. The cause of this asynchronism is unclear but supposed to be correlated with low packing density, high sintering activity, poor thermal conduction of ceramics and impurities. Early densification of the surface may have negative effects towards ceramic components with more homogeneous microstructure, suppressed pore coalescence and limited grain growth, and therefore needs to be better controlled through optimization in sintering protocol.
|
|
| 5. |
- Li, Hezhen, et al.
(författare)
-
Dental ceramic prostheses by stereolithography-based additive manufacturing : potentials and challenges
- 2019
-
Ingår i: Advances in Applied Ceramics. - : Informa UK Limited. - 1743-6753 .- 1743-6761. ; 118:1-2, s. 30-36
-
Tidskriftsartikel (refereegranskat)abstract
- The current method for making dental ceramic prostheses in a subtractive manner causes a severe waste of materials while requires excessive manual works that bring in the uncertainty for control of quality. The rapid development and commercialisation of additive manufacturing (AM) has aroused interest and wonders both in material and dental communities about their potentials and challenges in fabricating of ceramic prostheses in a materials-saving manner. In this work, AM approach was applied to fabricate the dental bridges and implants made of zirconia. The achieved geometries and dimensional accuracy are used to demonstrate the potential of this technique in fabricating of dental ceramic prostheses, whereas the observed macro and micro defects formed during the treatment process is used to reveal the challenges facing in order to adapt this technology into real dental practice. Suggestions are provided for future development of the technology, particularly on minimising the processing defects.
|
|
| 6. |
- Li, Hezhen, et al.
(författare)
-
Stereolithography-fabricated zirconia dental prostheses : concerns based on clinical requirements
- 2020
-
Ingår i: Advances in Applied Ceramics. - : Informa UK Limited. - 1743-6753 .- 1743-6761. ; 119:5-6, s. 236-243
-
Tidskriftsartikel (refereegranskat)abstract
- With the recent rapid development of the additive manufacturing family of technologies, the interest in application potential of stereolithography on producing ceramic dental prostheses has aroused and been widely discussed. While someone claimed the birth of 'stereolithography-fabricated ceramic dental prostheses', an overall evaluation based on the clinical requirements is lacking, making the optimism a kind of unrealistic. In this article, the prototypes of ceramic dental prostheses and standard specimens produced by the ceramic stereolithography approach are compared with those made by the classic subtractive manufacturing method by following the critical clinical requirements. Concerns on the upcoming challenges and future improvement towards clinical applications are presented that include productivity, delivery time, dimensional tolerance, mechanical and aesthetic properties. It is concluded that it is far too early to call 'stereolithography-fabricated ceramic dental prostheses' as a success as usable and competitive products for clinical applications.
|
|
| 7. |
- Sheng, Renwang, et al.
(författare)
-
Material stiffness in cooperation with macrophage paracrine signals determines the tenogenic differentiation of mesenchymal stem cells
- 2023
-
Ingår i: Advanced Science. - : John Wiley & Sons. - 2198-3844. ; 10:17
-
Tidskriftsartikel (refereegranskat)abstract
- Stiffness is an important physical property of biomaterials that determines stem cell fate. Guiding stem cell differentiation via stiffness modulation has been considered in tissue engineering. However, the mechanism by which material stiffness regulates stem cell differentiation into the tendon lineage remains controversial. Increasing evidence demonstrates that immune cells interact with implanted biomaterials and regulate stem cell behaviors via paracrine signaling; however, the role of this mechanism in tendon differentiation is not clear. In this study, polydimethylsiloxane (PDMS) substrates with different stiffnesses are developed, and the tenogenic differentiation of mesenchymal stem cells (MSCs) exposed to different stiffnesses and macrophage paracrine signals is investigated. The results reveal that lower stiffnesses facilitates tenogenic differentiation of MSCs, while macrophage paracrine signals at these stiffnesses suppress the differentiation. When exposed to these two stimuli, MSCs still exhibit enhanced tendon differentiation, which is further elucidated by global proteomic analysis. Following subcutaneous implantation in rats for 2 weeks, soft biomaterial induces only low inflammation and promotes tendon-like tissue formation. In conclusion, the study demonstrates that soft, rather than stiff, material has a greater potential to guide tenogenic differentiation of stem cells, which provides comprehensive evidence for optimized bioactive scaffold design in tendon tissue engineering.
|
|
| 8. |
- Solmi, Marco, et al.
(författare)
-
Physical and mental health impact of COVID-19 on children, adolescents, and their families :
- 2022
-
Ingår i: Journal of Affective Disorders. - : Elsevier. - 0165-0327 .- 1573-2517. ; 299, s. 367-376
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The COVID-19 pandemic has altered daily routines and family functioning, led to closing schools, and dramatically limited social interactions worldwide. Measuring its impact on mental health of vulnerable children and adolescents is crucial. Methods: The Collaborative Outcomes study on Health and Functioning during Infection Times (COH-FIT - www. coh-fit.com) is an on-line anonymous survey, available in 30 languages, involving >230 investigators from 49 countries supported by national/international professional associations. COH-FIT has thee waves (until the pandemic is declared over by the WHO, and 6-18 months plus 24-36 months after its end). In addition to adults, COH-FIT also includes adolescents (age 14-17 years), and children (age 6-13 years), recruited via nonprobability/snowball and representative sampling and assessed via self-rating and parental rating. Nonmodifiable/modifiable risk factors/treatment targets to inform prevention/intervention programs to promote health and prevent mental and physical illness in children and adolescents will be generated by COH-FIT. Co primary outcomes are changes in well-being (WHO-5) and a composite psychopathology P-Score. Multiple behavioral, family, coping strategy and service utilization factors are also assessed, including functioning and quality of life. Results: Up to June 2021, over 13,000 children and adolescents from 59 countries have participated in the COHFIT project, with representative samples from eleven countries. Limitations: Cross-sectional and anonymous design. Conclusions: Evidence generated by COH-FIT will provide an international estimate of the COVID-19 effect on childrens, adolescents and families, mental and physical health, well-being, functioning and quality of life, informing the formulation of present and future evidence-based interventions and policies to minimize adverse effects of the present and future pandemics on youth.
|
|
| 9. |
- Solmi, Marco, et al.
(författare)
-
The collaborative outcomes study on health and functioning during infection times in adults (COH-FIT-Adults) : Design and methods of an international online survey targeting physical and mental health effects of the COVID-19 pandemic
- 2022
-
Ingår i: Journal of Affective Disorders. - : Elsevier. - 0165-0327 .- 1573-2517. ; 299, s. 393-407
-
Tidskriftsartikel (refereegranskat)abstract
- Background: . High-quality comprehensive data on short-/long-term physical/mental health effects of the COVID-19 pandemic are needed. Methods: . The Collaborative Outcomes study on Health and Functioning during Infection Times (COH-FIT) is an international, multi-language (n=30) project involving >230 investigators from 49 countries/territories/regions, endorsed by national/international professional associations. COH-FIT is a multi-wave, on-line anonymous, cross-sectional survey [wave 1: 04/2020 until the end of the pandemic, 12 months waves 2/3 starting 6/24 months threreafter] for adults, adolescents (14-17), and children (6-13), utilizing non-probability/snowball and representative sampling. COH-FIT aims to identify non-modifiable/modifiable risk factors/treatment targets to inform prevention/intervention programs to improve social/health outcomes in the general population/vulnerable subgrous during/after COVID-19. In adults, co-primary outcomes are change from pre-COVID-19 to intra-COVID-19 in well-being (WHO-5) and a composite psychopathology P-Score. Key secondary outcomes are a P-extended score, global mental and physical health. Secondary outcomes include health-service utilization/ functioning, treatment adherence, functioning, symptoms/behaviors/emotions, substance use, violence, among others. Results: . Starting 04/26/2020, up to 14/07/2021 >151,000 people from 155 countries/territories/regions and six continents have participated. Representative samples of >= 1,000 adults have been collected in 15 countries. Overall, 43.0% had prior physical disorders, 16.3% had prior mental disorders, 26.5% were health care workers, 8.2% were aged >= 65 years, 19.3% were exposed to someone infected with COVID-19, 76.1% had been in quarantine, and 2.1% had been COVID 19-positive. Limitations: . Cross-sectional survey, preponderance of non-representative participants. Conclusions: . Results from COH-FIT will comprehensively quantify the impact of COVID-19, seeking to identify high-risk groups in need for acute and long-term intervention, and inform evidence-based health policies/strategies during this/future pandemics.
|
|
| 10. |
- Solmi, Marco, et al.
(författare)
-
Validation of the Collaborative Outcomes study on Health and Functioning during Infection Times (COH-FIT) questionnaire for adults
- 2023
-
Ingår i: Journal of Affective Disorders. - : ELSEVIER. - 0165-0327 .- 1573-2517. ; 326, s. 249-261
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The Collaborative Outcome study on Health and Functioning during Infection Times (COH-FIT; www.coh-fit.com) is an anonymous and global online survey measuring health and functioning during the COVID-19 pandemic. The aim of this study was to test concurrently the validity of COH-FIT items and the in-ternal validity of the co-primary outcome, a composite psychopathology "P-score". Methods: The COH-FIT survey has been translated into 30 languages (two blind forward-translations, consensus, one independent English back-translation, final harmonization). To measure mental health, 1-4 items ("COH-FIT items") were extracted from validated questionnaires (e.g. Patient Health Questionnaire 9). COH-FIT items measured anxiety, depressive, post-traumatic, obsessive-compulsive, bipolar and psychotic symptoms, as well as stress, sleep and concentration. COH-FIT Items which correlated r >= 0.5 with validated companion question-naires, were initially retained. A P-score factor structure was then identified from these items using exploratory factor analysis (EFA) and confirmatory factor analyses (CFA) on data split into training and validation sets. Consistency of results across languages, gender and age was assessed. Results: From >150,000 adult responses by May 6th, 2022, a subset of 22,456 completed both COH-FIT items and validated questionnaires. Concurrent validity was consistently demonstrated across different languages for COH-FIT items. CFA confirmed EFA results of five first-order factors (anxiety, depression, post-traumatic, psychotic, psychophysiologic symptoms) and revealed a single second-order factor P-score, with high internal reliability (omega = 0.95). Factor structure was consistent across age and sex. Conclusions: COH-FIT is a valid instrument to globally measure mental health during infection times. The P-score is a valid measure of multidimensional mental health.
|
|
