| 1. |
- Sikora, M., et al.
(författare)
-
The population history of northeastern Siberia since the Pleistocene
- 2019
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 570:7760
-
Tidskriftsartikel (refereegranskat)abstract
- Northeastern Siberia has been inhabited by humans for more than 40,000 years but its deep population history remains poorly understood. Here we investigate the late Pleistocene population history of northeastern Siberia through analyses of 34 newly recovered ancient genomes that date to between 31,000 and 600 years ago. We document complex population dynamics during this period, including at least three major migration events: an initial peopling by a previously unknown Palaeolithic population of 'Ancient North Siberians' who are distantly related to early West Eurasian hunter-gatherers; the arrival of East Asian-related peoples, which gave rise to 'Ancient Palaeo-Siberians' who are closely related to contemporary communities from far-northeastern Siberia (such as the Koryaks), as well as Native Americans; and a Holocene migration of other East Asian-related peoples, who we name 'Neo-Siberians', and from whom many contemporary Siberians are descended. Each of these population expansions largely replaced the earlier inhabitants, and ultimately generated the mosaic genetic make-up of contemporary peoples who inhabit a vast area across northern Eurasia and the Americas.
|
|
| 2. |
|
|
| 3. |
- Bexell, U., et al.
(författare)
-
A ToF-SIMS study of linseed oil bonded to mercapto silane treated aluminium
- 2004
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 231-2, s. 362-365
-
Tidskriftsartikel (refereegranskat)abstract
- ToF-SIMS has been used to analyse an aluminium surface treated with a vegetable oil using a mercapto silane as a coupling agent between the aluminium substrate and the vegetable oil. The coupling between the vegetable oil and the mercapto silane was obtained through a photoinduced thiol-ene reaction using UV-radiation. The ToF-SIMS results show that the desired thiolene reaction has taken place between the unsaturated parts of the vegetable oil and the thiol groups of the mercapto silane via the thiol-ene reaction forming a surface film.
|
|
| 4. |
- Arapoglu, S., et al.
(författare)
-
Multi-spin giants
- 2004
-
Ingår i: Phys. Rev.. ; D69, s. 106006-
-
Tidskriftsartikel (refereegranskat)
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Bexell, U., et al.
(författare)
-
A tribological study of a novel pre-treatment with linseed oil bonded to mercaptosilane treated aluminium
- 2003
-
Ingår i: Surface & Coatings Technology. - 0257-8972 .- 1879-3347. ; 166:03-feb, s. 141-152
-
Tidskriftsartikel (refereegranskat)abstract
- In sheet metal forming processes, lubricants are necessary in order to prevent galling, i.e. material transfer from the sheet metal to the tool surface and to control friction. Today, dry lubricants are increasingly being used for solving this problem. Among these, multifunctional coatings, often referred to as permanent coatings, normally based on organic resins, are lubricants which have the potential to increase the formability without additional lubrication, give corrosion protection, fingerprint and scratch resistance during handling and transport and finally, serve as a pre-treatment before painting. With increasing concern about the environment and human health it is important to develop new environmentally friendly pre-treatments in the surface engineering of metal substrates. This is mainly due to the toxic and carcinogenic properties of the chromium based surface pre-treatments frequently used in the industry. During the last decade, simple solution-dip silane based pre-treatments have emerged as promising candidates for the replacement of currently used pre-treatments of metals. A silane film can give good corrosion protection properties but is often too thin to prevent galling under a forming operation. A renewed interest for using vegetable oils in surface engineering has appeared lately due to several factors. Vegetable oils are renewable resources, modem technology can produce more well defined and pure oils, and the fatty acid content can be altered with modern crops development techniques. With the proper choice of silane pre-treatment of a metal surface, a vegetable oil can be coupled to the surface and give the desired lubrication properties. In this paper, aluminium sheets have been pre-treated with a mercapto silane after which a vegetable oil has been attached. The coupling between the silane and the oil was obtained through a photoinduced thiol-ene reaction using UV-radiation. The influence of different process parameters on the friction and wear behaviour was evaluated using modified scratch testing. Scanning electron microscopy (SEM), Auger electron spectroscopy (AES) and contact angle measurements were used to characterise the as-deposited surface films and their tribological behaviour, i.e. failure mechanisms. The results obtained show that the unsaturated vegetable oil has reacted with the thiol groups via the thiol-ene reaction forming a surface film. Also, the results show that the thickness of the films is of importance for the tribological characteristics, i.e. a too thin layer (less than 25 A in the present work) results in high friction and severe adhesive wear. However, a thicker layer with enhanced load carrying capacity can be produced with a proper heat treatment of the deposited vegetable oil. Finally, the results show that thick (more than 200 Angstrom in the present work) silane films are sensitive to brittle fracture when exposed to a sliding contact.
|
|
| 8. |
- Bexell, Ulf, et al.
(författare)
-
Bonding of vegetable oils to mercapto silane treated metal surfaces : Surface engineering on the nano scale
- 2006
-
Ingår i: Thin Solid Films. - : Elsevier BV. - 0040-6090 .- 1879-2731. ; 515:2, s. 838-841
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper the bonding of thin vegetable oil films on mercapto silane treated aluminium surfaces has been studied. The silane molecules are attached to the surface by metal-oxygen-silicon bonds. The coupling between the unsaturated bonds of the vegetable oil and the thiol functionalised surface was obtained through a photoinduced thiol-ene reaction. The surfaces were characterised by X-ray photoelectron spectroscopy (XPS). Vegetable oil contains both saturated and unsaturated carbon chains. For the reactions investigated in this study it is the unsaturated carbon chains that can react by a thiol-ene reaction and the results indicate that it is possible to attach a vegetable oil to a metal surface pre-treated with a thiol functionalised silane.
|
|
| 9. |
- Brijs, J., et al.
(författare)
-
Humane slaughter of African sharptooth catfish (Clarias gariepinus): Effects of various stunning methods on brain function
- 2021
-
Ingår i: Aquaculture. - : Elsevier BV. - 0044-8486 .- 1873-5622. ; 531
-
Tidskriftsartikel (refereegranskat)abstract
- © 2020 The Authors Common slaughter procedures for African sharptooth catfish (Clarias gariepinus) include asphyxiation, ice chilling and exsanguination, which may all cause substantial suffering over prolonged periods of time before death. Therefore, comprehensive evaluations of potentially more humane slaughter procedures for this species are urgently needed. Here, we use a non-invasive electroencephalographic (EEG) method to assess the state of sensibility in African sharptooth catfish in response to various stunning methods (e.g. ice chilling, electrical stunning, electrical stunning followed by exsanguination, percussive stunning, and immersion in isoeugenol). Based on the abolition of visually evoked responses (VERs) on the EEG, ice slurry immersion induced insensibility between 2.6 and 7.6 min, during which catfish exhibited aversive behaviours. Once VERs were lost, they remained absent so long as catfish remained immersed in the ice slurry. Electrical stunning (i.e. exposure to ~1.7 A dm−2 at a water conductivity of ~997 μS cm−1) induced insensibility immediately but not irreversibly. Depending on the duration of the stun (i.e. from 1 to 10 s), catfish either regained VERs immediately or within 4.9 min after the completion of the electrical insult. However, when a 10 s electrical stun was immediately followed by exsanguination and immersion in an ice slurry, the duration of insensibility was sufficient to humanely kill catfish. When administered correctly, manual percussive stunning with a fish priest induced insensibility immediately and irreversibly. However, 36% of catfish regained VERs, which is likely explained by the difficulty associated with administering an accurate manual percussive stun of sufficient force on a live and struggling catfish. Catfish appeared to be sedated following immersion in isoeugenol (i.e. catfish were calm and easy to handle), yet VERs remained present at doses exceeding that recommended for euthanasia in salmonids, which indicates that this substance may not be suitable for stunning catfish. However, the potential for using isoeugenol as a pre-stunning sedative for improving handleability and reducing handling stress of this species warrants further investigation. In conclusion, this study clearly demonstrates that when singularly administered, none of the abovementioned stunning methods could reliably induce insensibility immediately and/or irreversibly without welfare implications. Yet, our findings indicate that these shortcomings can be resolved by using a combination of methods. This could include an electrical or percussive stun to immediately induce insensibility that should be immediately followed by exsanguination and immersion in an ice slurry to maintain insensibility until death.
|
|
| 10. |
- Clark, M. S., et al.
(författare)
-
Deciphering mollusc shell production: the roles of genetic mechanisms through to ecology, aquaculture and biomimetics
- 2020
-
Ingår i: Biological Reviews. - : Wiley. - 1464-7931 .- 1469-185X. ; 95:6, s. 1812-37
-
Tidskriftsartikel (refereegranskat)abstract
- Most molluscs possess shells, constructed from a vast array of microstructures and architectures. The fully formed shell is composed of calcite or aragonite. These CaCO(3)crystals form complex biocomposites with proteins, which although typically less than 5% of total shell mass, play significant roles in determining shell microstructure. Despite much research effort, large knowledge gaps remain in how molluscs construct and maintain their shells, and how they produce such a great diversity of forms. Here we synthesize results on how shell shape, microstructure, composition and organic content vary among, and within, species in response to numerous biotic and abiotic factors. At the local level, temperature, food supply and predation cues significantly affect shell morphology, whilst salinity has a much stronger influence across latitudes. Moreover, we emphasize how advances in genomic technologies [e.g. restriction site-associated DNA sequencing (RAD-Seq) and epigenetics] allow detailed examinations of whether morphological changes result from phenotypic plasticity or genetic adaptation, or a combination of these. RAD-Seq has already identified single nucleotide polymorphisms associated with temperature and aquaculture practices, whilst epigenetic processes have been shown significantly to modify shell construction to local conditions in, for example, Antarctica and New Zealand. We also synthesize results on the costs of shell construction and explore how these affect energetic trade-offs in animal metabolism. The cellular costs are still debated, with CaCO(3)precipitation estimates ranging from 1-2 J/mg to 17-55 J/mg depending on experimental and environmental conditions. However, organic components are more expensive (similar to 29 J/mg) and recent data indicate transmembrane calcium ion transporters can involve considerable costs. This review emphasizes the role that molecular analyses have played in demonstrating multiple evolutionary origins of biomineralization genes. Although these are characterized by lineage-specific proteins and unique combinations of co-opted genes, a small set of protein domains have been identified as a conserved biomineralization tool box. We further highlight the use of sequence data sets in providing candidate genes forin situlocalization and protein function studies. The former has elucidated gene expression modularity in mantle tissue, improving understanding of the diversity of shell morphology synthesis. RNA interference (RNAi) and clustered regularly interspersed short palindromic repeats - CRISPR-associated protein 9 (CRISPR-Cas9) experiments have provided proof of concept for use in the functional investigation of mollusc gene sequences, showing for example that Pif (aragonite-binding) protein plays a significant role in structured nacre crystal growth and that theLsdia1gene sets shell chirality inLymnaea stagnalis. Much research has focused on the impacts of ocean acidification on molluscs. Initial studies were predominantly pessimistic for future molluscan biodiversity. However, more sophisticated experiments incorporating selective breeding and multiple generations are identifying subtle effects and that variability within mollusc genomes has potential for adaption to future conditions. Furthermore, we highlight recent historical studies based on museum collections that demonstrate a greater resilience of molluscs to climate change compared with experimental data. The future of mollusc research lies not solely with ecological investigations into biodiversity, and this review synthesizes knowledge across disciplines to understand biomineralization. It spans research ranging from evolution and development, through predictions of biodiversity prospects and future-proofing of aquaculture to identifying new biomimetic opportunities and societal benefits from recycling shell products.
|
|
