| 1. |
- Anderson, Tony, 1973-, et al.
(författare)
-
Frog melanophores cultured on fluorescent microbeads : Biomimic-based biosensing
- 2005
-
Ingår i: Biosensors & bioelectronics. - : Elsevier BV. - 0956-5663 .- 1873-4235. ; 21:1, s. 111-120
-
Tidskriftsartikel (refereegranskat)abstract
- Melanophores are pigmented cells in lower vertebrates capable of quick color changes and thereby suitable as whole cell biosensors. In the frog dermis skin layer, the large and dark pigmented melanophore surrounds a core of other pigmented cells. Upon hormonal stimulation the black-brown pigment organelles will redistribute within the melanophore, and thereby cover or uncover the core, making complex color changes possible in the dermis. Previously, melanophores have only been cultured on flat surfaces. Here we mimic the three dimensional biological geometry in the frog dermis by culturing melanophores on fluorescent plastic microbeads. To demonstrate biosensing we use the hormones melatonin and α-melanocyte stimulating hormone (α-MSH) as lightening or darkening stimuli, respectively. Cellular responses were successfully demonstrated on single cell level by fluorescence microscopy, and in cell suspension by a fluorescence microplate reader and a previously demonstrated computer screen photo-assisted technique. The demonstrated principle is the first step towards "single well/multiple read-out" biosensor arrays based on suspensions of different selective-responding melanophores, each cultured on microbeads with distinctive spectral characteristics. By applying small amount of a clinical sample, or a candidate substance in early drug screening, to a single well containing combinations of melanophores on beads, multiple parameter read-outs will be possible. © 2004 Elsevier B.V. All rights reserved.
|
|
| 2. |
- Comina Bellido, German
(författare)
-
Autonomous Lab-on-a-chip: solutions and fast prototyping tools
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- In this thesis, solutions for the development of autonomous Lab-on-a-chip (LOC), and 3D printing for fast prototyping of LOC devices are investigated. Lab-on-a-chip devices integrate analytical systems and conditioning processes in a compact package. Small sample volume, disposability, ability to perform complex analysis and performance comparable to classical instrumentation are characteristics that make LOCs excellent candidates for biomedical applications, environmental monitoring and food analysis. Classical LOC configurations usually require additional elements such as pumps, valves, fluidics interface connectors, and even pneumatic control to operate. Also, in most cases, a computer-capable device, or standalone control system, is needed in connection with the measurements. Autonomous LOCs avoid the use of additional components, as they are designed to integrate all necessary parts in one design. Cell phones are the most wide spread computer capable devices, and the advantage to exploit them as analytical instruments is obvious. They have been used in connection with microfluidic LOC measurements, typically using accessory dongles. To connect to the LOCs, in some cases, even permanent modifications of the phones were required. In this thesis, direct coupling to cell phone readout, without accessories beyond the LOC, has been investigated. Autonomous LOC development demands extensive time and resources for prototype optimization. Classical LOC fabrication methods, which are based on lithographic microfabrication, require special equipment and facilities. Additionally, the fabrication of 3D structures require multiple fabrication steps with numerous intermediate alignment. In this thesis, commercial-grade, low-cost 3D printers have been investigated as fast LOC prototyping platforms. The printers (Miicraft® DLP-3D printer and Formlabs Inc. Form+1) are based on Stereo Lithography (SLA). In this additive fabrication technique, a 3D computer model of the LOC is designed. Later, the 3D model is sliced in 2D patterns along the height of the design, and each of the 2D patterns is projected through the printer transparent tank bottom, which contains a liquid photocurable resin. Each exposure cures a thin layer of the resin, and the procedure is repeated adding layer after layer until the 3D printout is completed. With this technique it was possible to obtain real 3D LOC structures with unlimited number of 3D features in one step, within the hour, and at low-cost for prototyping, which constitutes a superb tool for fast and affordable sophistication of LOC architecture. The process was extended in this thesis to another area of complex and costly development: the manufacture of optical components. It was shown that optical components with arbitrary geometry could be obtained within the hour and typically for less than 1€/prototype. The first use of the technique was to produce templates for classical LOCs of polydimethylsiloxane (PDMS) on glass. The procedure was the first, to our knowledge, implemented with consumer grade printers, and included a demonstration of template fabrication for the development of a multilayer PDMS-LOC for colorimetric detection of glucose. The technique then evolved to the complete replacement of the PDMS stage, by conceiving the LOC architecture as a single monolithic printout. This concept was coined Unibody LOC (ULOC) and was used in this thesis for the development of all the autonomous Lab on a Chip solutions. Numerous solutions towards autonomous LOCs were developed such as: multidimensional adaptors that connect for example 1.6mm diameter tubing directly to 50μm wide microfluidic channels, several on plane and multilayer mixers, hybrid ULOC with paper channels, finger-pumps, check-valves, optical couplers and 3D printed optics. Time-dependent optical response bio-chemical reactions were identified as key to implement the link between autonomous LOC with cell phones without other accessories, and relying on ambient light as illumination. Such approach improves the analytical resolution of a colorimetric measurement using essentially the same camera. Finally, all those solutions were integrated to develop a chemical sensing interface for universal cell phone readout, and a 3D printed device for quantitative enzymatic detection using cell phones.
|
|
| 3. |
- Comina, German, et al.
(författare)
-
3D printed disposable optics and lab-on-a-chip devices for chemical sensing with cell phones
- 2017
-
Ingår i: MICROFLUIDICS, BIOMEMS, AND MEDICAL MICROSYSTEMS XV. - : SPIE-INT SOC OPTICAL ENGINEERING. - 9781510605633 - 9781510605640
-
Konferensbidrag (refereegranskat)abstract
- Digital manufacturing (DM) offers fast prototyping capabilities and great versatility to configure countless architectures at affordable development costs. Autonomous lab-on-a-chip (LOC) devices, conceived as only disposable accessory to interface chemical sensing to cell phones, require specific features that can be achieved using DM techniques. Here we describe stereo-lithography 3D printing (SLA) of optical components and unibody-LOC (ULOC) devices using consumer grade printers. ULOC devices integrate actuation in the form of check-valves and finger pumps, as well as the calibration range required for quantitative detection. Coupling to phone camera readout depends on the detection approach, and includes different types of optical components. Optical surfaces can be locally configured with a simple polishing-free post-processing step, and the representative costs are 0.5 US$/device, same as ULOC devices, both involving fabrication times of about 20 min.
|
|
| 4. |
- Comina, German, et al.
(författare)
-
3D Printed Unibody Lab-on-a-Chip: Features Survey and Check-Valves Integration dagger
- 2015
-
Ingår i: Micromachines. - : MDPI. - 2072-666X. ; 6:4, s. 437-451
-
Tidskriftsartikel (refereegranskat)abstract
- The unibody lab-on-a-chip (ULOC) concept entails a fast and affordable micro-prototyping system built around a single monolithic 3D printed element (unibody). A consumer-grade stereo lithography (SL) 3D printer can configure ULOCs with different forms of sample delivery, transport, handling and readout, while minimizing material costs and fabrication time. ULOC centralizes all complex fabrication procedures and replaces the need for clean room resources, delivering prototypes for less than 1 US$, which can be printed in 10 min and ready for testing in less than 30 min. Recent examples of ULOC integration of transport, chemical sensing for optical readout and flow mixing capabilities are discussed, as well as the integration of the first check-valves for ULOC devices. ULOC valves are strictly unidirectional up to 100 psi, show an exponential forward flow behavior up to 70 psi and can be entirely fabricated with the ULOC approach.
|
|
| 5. |
- Comina, German, et al.
(författare)
-
A 3D printed device for quantitative enzymatic detection using cell phones
- 2016
-
Ingår i: Analytical Methods. - : Royal Society of Chemistry. - 1759-9660 .- 1759-9679. ; 8:32, s. 6135-6142
-
Tidskriftsartikel (refereegranskat)abstract
- A disposable device for quantitative enzymatic detection capable of coupling illumination and image readouts from cell phones is demonstrated. The device integrates a calibration range for glutamate detection, utilizes the phone screen as a light source, and provides the necessary actuation for autonomous operation. Custom made optics required to couple to the cell phone camera is accomplished using affordable stereolithography (SLA) 3D printers. The described method does not involve polishing, requires only two steps from design to implementation, and can be locally applied to 3D printed lab-on-a-chip (LOC) prototypes, using the same materials. Optical finishing and dimensional variability within 2% were achieved, supporting entirely arbitrary geometries for elements larger than 400 mm in radius. Representative fabrication times and costs were 20 min and $0.50 USD per prototype.
|
|
| 6. |
- Comina, German, et al.
(författare)
-
Autonomous Chemical Sensing Interface for Universal Cell Phone Readout
- 2015
-
Ingår i: Angewandte Chemie International Edition. - : Wiley-VCH Verlagsgesellschaft. - 1433-7851 .- 1521-3773. ; 54:30, s. 8708-8712
-
Tidskriftsartikel (refereegranskat)abstract
- Exploiting the ubiquity of cell phones for quantitative chemical sensing imposes strong demands on interfacing devices. They should be autonomous, disposable, and integrate all necessary calibration and actuation elements. In addition, a single design should couple universally to a variety of cell phones, and operate in their default configuration. Here, we demonstrate such a concept and its implementation as a quantitative glucose meter that integrates finger pumps, unidirectional valves, calibration references, and focusing optics on a disposable device configured for universal video acquisition.
|
|
| 7. |
- Comina, German, et al.
(författare)
-
Low cost lab-on-a-chip prototyping with a consumer grade 3D printer
- 2014
-
Ingår i: Lab on a Chip. - : Royal Society of Chemistry. - 1473-0197 .- 1473-0189. ; 14:16, s. 2978-2982
-
Tidskriftsartikel (refereegranskat)abstract
- Versatile prototyping of 3D printed lab-on-a-chip devices, supporting different forms of sample delivery, transport, functionalization and readout, is demonstrated with a consumer grade printer, which centralizes all critical fabrication tasks. Devices cost 0.57US$ and are demonstrated in chemical sensing and micromixing examples, which exploit established principles from reference technologies.
|
|
| 8. |
- Comina, German, et al.
(författare)
-
PDMS lab-on-a-chip fabrication using 3D printed templates
- 2014
-
Ingår i: Lab on a Chip. - : Royal Society of Chemistry. - 1473-0197 .- 1473-0189. ; 14:2, s. 424-430
-
Tidskriftsartikel (refereegranskat)abstract
- The fabrication of conventional PDMS on glass lab-on-a-chip (LOC) devices, using templates printed with a commercial (2299 US$) micro-stereo lithography 3D printer, is demonstrated. Printed templates replace clean room and photolithographic fabrication resources and deliver resolutions of 50 mu m, and up to 10 mu m in localized hindrances, whereas the templates are smooth enough to allow direct transfer and proper sealing to glass substrates. 3D printed templates accommodate multiple thicknesses, from 50 mu m up to several mm within the same template, with no additional processing cost or effort. This capability is exploited to integrate silicone tubing easily, to improve micromixer performance and to produce multilevel fluidics with simple access to independent functional surfaces, which is illustrated by time-resolved glucose detection. The templates are reusable, can be fabricated in under 20 min, with an average cost of 0.48 US$, which promotes broader access to established LOC configurations with minimal fabrication requirements, relieves LOC fabrication from design skills and provides a versatile LOC development platform.
|
|
| 9. |
- Comina, German, et al.
(författare)
-
Towards autonomous lab-on-a-chip devices for cell phone biosensing
- 2016
-
Ingår i: Biosensors & bioelectronics. - : Elsevier. - 0956-5663 .- 1873-4235. ; 77, s. 1153-1167
-
Tidskriftsartikel (refereegranskat)abstract
- Modern cell phones are a ubiquitous resource with a residual capacity to accommodate chemical sensing and biosensing capabilities. From the different approaches explored to capitalize on such resource, the use of autonomous disposable lab-on-a-chip (LOC) devices conceived as only accessories to complement cell phones underscores the possibility to entirely retain cell phones ubiquity for distributed biosensing. The technology and principles exploited for autonomous LOC devices are here selected and reviewed focusing on their potential to serve cell phone readout configurations. Together with this requirement, the central aspects of cell phones resources that determine their potential for analytical detection are examined. The conversion of these LOC concepts into universal architectures that are readable on unaccessorized phones is discussed within this context. (C) 2015 Elsevier B.V. All rights reserved.
|
|
| 10. |
- Elfwing, Anders, 1975-
(författare)
-
On decoration of biomolecular scaffolds with a conjugated polyelectrolyte
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Biotemplating is the art of using a biological structure as a scaffold which is decorated with a functional material. In this fashion the structures will gain new functionalities and biotemplating offers a simple route of mass-producing mesoscopic material with new interesting properties. Biological structures are abundant and come in a great variety of elaborate and due to their natural origin they could be more suitable for interaction with biological systems than wholly synthetic materials. Conducting polymers are a novel class of material which was developed just 40 years ago and are well suited for interaction with biological material due to their organic composition. Furthermore the electronic properties of the conducting polymers can be tuned giving rise to dynamic control of the behavior of the material. Self-assembly processes are interesting since they do not require complicated or energy demanding processing conditions. This is particularly important as most biological materials are unstable at elevated temperatures or harsh environments. The main aim of this thesis is to show the possibility of using self-assembly to decorate a conducting polymer onto various biotemplates. Due to the intrinsic variety in charge, size and structure between the available natural scaffolds it is difficult, if not impossible, to find a universal method.In this thesis we show how biotemplating can be used to create new hybrid materials by self-assembling a conducting polymer with biological structures based on DNA, protein, lipids and cellulose, and in this fashion create material with novel optical and electronic properties.
|
|
