| 1. |
- Aitola, Kerttu, et al.
(författare)
-
Carbon nanotube-based hybrid hole-transporting material and selective contact for high efficiency perovskite solar cells
- 2016
-
Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry (RSC). - 1754-5692 .- 1754-5706. ; 9:2, s. 461-466
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate a high efficiency perovskite solar cell with a hybrid hole-transporting material-counter electrode based on a thin single-walled carbon nanotube (SWCNT) film and a drop-cast 2,2,7,-7-tetrakis(N, N-di-p-methoxyphenylamine)-9,90-spirobifluorene (Spiro-OMeTAD) hole-transporting material (HTM). The average efficiency of the solar cells was 13.6%, with the record cell yielding 15.5% efficiency. The efficiency of the reference solar cells with spin-coated Spiro-OMeTAD hole-transportingmaterials (HTMs) and an evaporated gold counter electrode was 17.7% (record 18.8%), that of the cells with only a SWCNT counter electrode (CE) without additional HTM was 9.1% (record 11%) and that of the cells with gold deposited directly on the perovskite layer was 5% (record 6.3%). Our results show that it is possible to manufacture high efficiency perovskite solar cells with thin film (thickness less than 1 mu m) completely carbon-based HTMCEs using industrially upscalable manufacturing methods, such as press-transferred CEs and drop-cast HTMs.
|
|
| 2. |
- Aitola, Kerttu, et al.
(författare)
-
High Temperature-Stable Perovskite Solar Cell Based on Low-Cost Carbon Nanotube Hole Contact
- 2017
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 29:17
-
Tidskriftsartikel (refereegranskat)abstract
- Mixed ion perovskite solar cells (PSC) are manufactured with a metal-free hole contact based on press-transferred single-walled carbon nanotube (SWCNT) film infiltrated with 2,2,7,-7-tetrakis(N, N-di-p-methoxyphenylamine)-9,90-spirobifluorene (Spiro-OMeTAD). By means of maximum power point tracking, their stabilities are compared with those of standard PSCs employing spin-coated Spiro-OMeTAD and a thermally evaporated Au back contact, under full 1 sun illumination, at 60 degrees C, and in a N-2 atmosphere. During the 140 h experiment, the solar cells with the Au electrode experience a dramatic, irreversible efficiency loss, rendering them effectively nonoperational, whereas the SWCNT-contacted devices show only a small linear efficiency loss with an extrapolated lifetime of 580 h.
|
|
| 3. |
- Cheng, Ming, et al.
(författare)
-
Acceptor Donor Acceptor type ionic molecule materials for efficient perovskite solar cells and organic solar cells
- 2016
-
Ingår i: Nano Energy. - : Elsevier BV. - 2211-2855. ; 30, s. 387-397
-
Tidskriftsartikel (refereegranskat)abstract
- Perovskite solar cells (PSCs) have attracted significant interest and hole transporting materials (HTMs) play important roles in achieving high efficiency. Here, we report additive free ionic type HTMs that are based on 2-ethylhexyloxy substituted benzodithiophene (BDT) core unit. With the ionization of end-capping pyridine units, the hole mobility and conductivity of molecular materials are greatly improved. Applied in PSCs, ionic molecular material M7-TFSI exhibits the highest efficiency of 17.4% in the absence of additives [lithium bis(trifluor-omethanesulfonyl)imide and 4-tert-butylpyridine]. The high efficiency is attributed to a deep highest occupied molecular orbital (HOMO) energy level, high hole mobility and high conductivity of M7-TFSI. Moreover, due to the higher hydrophobicity of M7-TFSI, the corresponding PSCs showed better stability than that of Spiro-OMeTAD based ones. In addition, the strong absorption and suitable energy levels of materials (M6, M7-13r and M7-TFSI) also qualify them as donor materials in organic solar cells (OSCs) and the devices containing M7-TFSI as donor material displayed an efficiency of 6.9%.
|
|
| 4. |
- Freitag, Marina, et al.
(författare)
-
High-efficiency dye-sensitized solar cells with molecular copper phenanthroline as solid hole conductor
- 2015
-
Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry (RSC). - 1754-5692 .- 1754-5706. ; 8:9, s. 2634-2637
-
Tidskriftsartikel (refereegranskat)abstract
- Copper phenanthroline complexes in the solid phase can act as efficient molecular hole transporting material (HTM) for hybrid solar cells. We prepared solid-state dye-sensitized solar cells with the organic dye LEG4 and bis(2,9-dimethyl-1,10-phenanthroline)copper(I/II) (Cu(dmp)(2)) and achieved power conversion efficiencies of more than 8% under 1000 W m(-2) AM1.5G illumination, with open-circuit potentials of more than 1.0 V. The successful application of a copper-complex based HTM paves the way for low-cost and efficient hybrid solar cells, as well as for other opto-electronic devices.
|
|
| 5. |
- Hua, Yong, et al.
(författare)
-
Facile synthesis of fluorene-based hole transport materials for highly efficient perovskite solar cells and solid-state dye-sensitized solar cells
- 2016
-
Ingår i: Nano Energy. - : Elsevier. - 2211-2855 .- 2211-3282. ; 26, s. 108-113
-
Tidskriftsartikel (refereegranskat)abstract
- Two novel low-cost fluorene-based hole transport materials (HTMs) HT1 and HT2 as alternatives to the expensive HTM Spiro-OMeTAD have been designed and synthesized for the application in perovskite solar cells (PSCs) and solid-state dye-sensitized solar cell (ssDSCs). The two HTMs were prepared through a facile two-step reaction from cheap starting material and with a total yield higher than 90%. These HTMs exhibit good solubility and charge-transport ability. PSCs based on HT2 achieved power conversion efficiency (PCE) of 18.04% under air conditions, which is comparable to that of the cell employing the commonly used Spiro-OMeTAD (18.27%), while HT1-based cell showed a slightly worse performance with a PCE of 17.18%. For ssDSCs, the HT2-based device yielded a PCE of 6.35%, which is also comparable to that of a cell fabricated based on Spiro-OMeTAD (6.36%). We found that the larger dimensional structure and molecular weight of HT2 enable better photovoltaic performance than that of the smaller one HT1. These results show that easily synthesized fluorene-based HTMs have great potential to replace the expensive Spiro-OMeTAD for both PSCs and ssDSCs.
|
|
| 6. |
- Hultqvist, Adam, et al.
(författare)
-
Atomic Layer Deposition of Electron Selective SnOx and ZnO Films on Mixed Halide Perovskite : Compatibility and Performance
- 2017
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 9:35, s. 29707-29716
-
Tidskriftsartikel (refereegranskat)abstract
- The compatibility of atomic layer deposition directly onto the mixed halide perovskite formamidinium lead iodide:methylammonium lead bromide (CH(NH2)(2), CH3NH3)Pb(I,Br)(3) (FAPbI(3):MAPbBr(3)) perovskite films is investigated by exposing the perovskite films to the full or partial atomic layer deposition processes for the electron selective layer candidates ZnO and SnOx. Exposing the samples to the heat, the vacuum, and even the counter reactant of H2O of the atomic layer deposition processes does not appear to alter the perovskite films in terms of crystallinity, but the choice of metal precursor is found to be critical. The Zn precursor Zn(C2H5)(2) either by itself or in combination with H2O during the ZnO atomic layer deposition (ALD) process is found to enhance the decomposition of the bulk of the perovskite film into PbI2 without even forming ZnO. In contrast, the Sn precursor Sn(N(CH3)(2))(4) does not seem to degrade the bulk of the perovskite film, and conformal SnOx films can successfully be grown on top of it using atomic layer deposition. Using this SnOx film as the electron selective layer in inverted perovskite solar cells results in a lower power conversion efficiency of 3.4% than the 8.4% for the reference devices using phenyl-C-70-butyric acid methyl ester. However, the devices with SnOx show strong hysteresis and can be pushed to an efficiency of 7.8% after biasing treatments. Still, these cells lacks both open circuit voltage and fill factor compared to the references, especially when thicker SnOx films are used. Upon further investigation, a possible cause of these losses could be that the perovskite/SnOx interface is not ideal and more specifically found to be rich in Sn, O, and halides, which is probably a result of the nucleation during the SnOx growth and which might introduce barriers or alter the band alignment for the transport of charge carriers.
|
|
| 7. |
|
|
| 8. |
- Park, Byung-wook, et al.
(författare)
-
Enhanced Crystallinity in Organic-Inorganic Lead Halide Perovskites on Mesoporous TiO2 via Disorder-Order Phase Transition
- 2014
-
Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 26:15, s. 4466-4471
-
Tidskriftsartikel (refereegranskat)abstract
- Organic-inorganic halide perovskite (OIHP) compounds are very interesting materials for device application in, for example, solar cells, electro-optics, and electronic circuits. In this report, we investigated OIHPs reported as CH3NH3PbI3-xClx (MAPbI(3-x)Cl(x)) and CH3NH3PbI3 (MAPbI(3)) prepared from solution on mesoporous TiO2/glass substrates. A long-term conversion from disordered to more crystalline OIHPs was observed for both types of samples from XRD patterns over 5 weeks. The conversion rate to more crystalline OIHPs could be increased by increasing the temperature of the sample. SEM analyses of the two types of OIHPs show remarkably different surface microstructures. The X-ray diffractograms suggest that both samples are dominated by the similar crystal structure, although the preferential orientation for the crystal structure is different. Moreover, the results suggest that the material reported as MAPbI(3-x)Cl(x) is a combination of MAPbI(3) and MAPbCl(3). The crystal structure and exact nature of the material is important for the understanding and optimization of devices, and the possibility for enhanced crystallinity of the OIHPs shown in this report will therefore be important for further improvement and understanding of the devices.
|
|
| 9. |
- Saki, Zahra, et al.
(författare)
-
The Effect of Lithium Doping in Solution-Processed Nickel Oxide Films for Perovskite Solar Cells
- 2019
-
Ingår i: ChemPhysChem. - : WILEY-V C H VERLAG GMBH. - 1439-4235 .- 1439-7641. ; 20:24, s. 3322-3327
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of substitutional Li doping into NiOx hole transporting layer (HTL) for use in inverted perovskite solar cells was systematically studied. Li doped NiOx thin films with preferential crystal growth along the (111) plane were deposited using a simple solution-based process. Mott-Schottky analysis showed that hole carrier concentration (N-A) is doubled by Li doping. Utilizing 4 % Li in NiOx improved the power conversion efficiency (PCE) of solar devices from 9.0 % to 12.6 %. Photoluminescence quenching investigations demonstrate better hole capturing properties of Li:NiOx compared to that of NiOx, leading to higher current densities by Li doping. The electrical conductivity of NiOx is improved by Li doping. Further improvements of the device were made by using an additional ZnO layer onto PCBM, to remove shunt paths, leading to a PCE of 14.2 % and a fill factor of 0.72.
|
|
| 10. |
- Saki, Zahra, et al.
(författare)
-
The synergistic effect of dimethyl sulfoxide vapor treatment and C-60 electron transporting layer towards enhancing current collection in mixed-ion inverted perovskite solar cells
- 2018
-
Ingår i: Journal of Power Sources. - : ELSEVIER SCIENCE BV. - 0378-7753 .- 1873-2755. ; 405, s. 70-79
-
Tidskriftsartikel (refereegranskat)abstract
- Inverted perovskite solar cells (PSCs) have been introduced as better candidate for roll-to-roll printing and scaleup than their conventional configuration counterparts, while their fabrication is technically more demanding. The common light absorbing layer in inverted PSCs is the single cation methylammonium lead iodide (MAPbI(3)) perovskite, whereas mixed-ion perovskites are chemically more stable. In mixed-ion perovskites, where FA (formamidinium) is the main replacement for MA, the electron affinity is larger than in MAPbI3 perovskites, leading to possible barriers against photoelectron collection by the electron transporting layer (ETL). In this paper we report on a mixed-ion (FAPbI(3))(0.83)(MAPbBr(3))(0.17) inverted PSC with improved photocurrent through using a dimethyl sulfoxide vapor treatment of perovskite layer and replacing the conventional [6,6]-phenyl-C-71 butyric acid methyl ester (PC70BM) with C-60/bathocuproine (BCP) as more effective ETL. The treatment of perovskite layer results in reduction of impurity phases of 8-FAPbI(3) and Pbl(2). Photoluminescence and open circuit voltage decay data demonstrate better charge carrier collection by the C-60/BCP compared to the PC70BM ETL, and an electron barrier for the back flow of electrons from ETL to perovskite. Our improvements in perovskite crystalization and electron transfer layer simultaneously lead to increasing the current density from 10 to 21 mA cm(-2).
|
|
