| 1. |
- Legall, H., et al.
(författare)
-
Compact X-ray microscope for the water window based on a high brightness laser plasma source
- 2012
-
Ingår i: Optics Express. - 1094-4087. ; 20:16, s. 18362-18369
-
Tidskriftsartikel (refereegranskat)abstract
- We present a laser plasma based x-ray microscope for the water window employing a high-average power laser system for plasma generation. At 90 W laser power a brightness of 7.4 x 10(11) photons/(s x sr x mu m(2)) was measured for the nitrogen Ly alpha line emission at 2.478 nm. Using a multilayer condenser mirror with 0.3 % reflectivity 10(6) photons/(mu m(2) x s) were obtained in the object plane. Microscopy performed at a laser power of 60 W resolves 40 nm lines with an exposure time of 60 s. The exposure time can be further reduced to 20 s by the use of new multilayer condenser optics and operating the laser at its full power of 130 W.
|
|
| 2. |
- Nachtrab, F., et al.
(författare)
-
Development of a Timepix based detector for the NanoXCT project
- 2015
-
Ingår i: Journal of Instrumentation. - : Institute of Physics Publishing (IOPP). - 1748-0221. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- The NanoXCT EU FP7 project [1] aims at developing a laboratory, i.e. bench top sized X-ray nano-CT system with a large field-of-view (FOV) for non-destructive testing needs in the micro- and nano-technology sector. The targeted voxel size is 50 nm at 0.175 mm FOV, the maximum FOV is 1 mm at 285 nm voxel size. Within the project a suitable X-ray source, detector and manipulation system have been developed. The system concept [2] omits the use of X-ray optics, to be able to provide a large FOV of up to 1 mm and to preserve the flexibility of state-of-the-art micro-CT systems. The targeted resolution will be reached via direct geometric magnification made possible by the development of a specialized high-flux nano-focus transmission X-ray tube. The end-user's demand for elemental analysis will be covered by energy-resolved measurement techniques, in particular a K-edge imaging method. Timepix [3] modules were chosen as the basis for the detector system, since a photon counting detector is advantageous for the long exposure times that come with very small focal spot sizes. Additional advantages are the small pixel size and adjustable energy threshold. To fulfill the requirements on field-of-view, a detector width > 3000 pixels was needed. The NanoXCT detector consists of four Hexa modules with 500 mu m silicon sensors supplied by X-ray Imaging Europe. An adapter board was developed to connect all four modules to one Fitpix3 readout. The final detector has an active area of 3072 x 512 pixels or approximately 17 x 3 cm(2). In this contribution we present the development of the Timepix based NanoXCT detector, it's application in the NanoXCT project for CT and material specific measurements and the current status of results.
|
|
| 3. |
- Nachtrab, F., et al.
(författare)
-
NanoXCT : Development of a laboratory nano-CT system
- 2014
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE. - 9781628412390
-
Konferensbidrag (refereegranskat)abstract
- The NanoXCT project aims at developing a laboratory nano-CT system for non-destructive testing applications in the micro- and nano-technology sector. The system concept omits the use of X-ray optics, to be able to provide up to 1 mm FOV (at 285 nm voxel size) and down to 50 nm voxel size (at 0.175 mm FOV) while preserving the flexibility of state-of-the-art micro-CT systems. Within the project a suitable X-ray source, detector and manipulation system are being developed. To cover the demand for elemental analysis, the project will additionally include X-ray spectroscopic techniques. These will be reported elsewhere while this paper is focused on the imaging part of the project. We introduce the system concept including design goals and constraints, and the individual components. We present the current state of the prototype development including first results.
|
|
