| 1. |
- de Peppo, Giuseppe Maria, 1981, et al.
(author)
-
Human Embryonic Stem Cell-Derived Mesodermal Progenitors Display Substantially Increased Tissue Formation Compared to Human Mesenchymal Stem Cells Under Dynamic Culture Conditions in a Packed Bed/Column Bioreactor.
- 2013
-
In: Tissue engineering. Part A. - 1937-335X. ; 19:1-2, s. 175-87
-
Journal article (peer-reviewed)abstract
- Bone tissue engineering represents a promising strategy to obviate bone deficiencies, allowing the ex vivo construction of bone substitutes with unprecedented potential in the clinical practice. Considering that in the human body cells are constantly stimulated by chemical and mechanical stimuli, the use of bioreactor is emerging as an essential factor for providing the proper environment for the reproducible and large-scale production of the engineered substitutes. Human mesenchymal stem cells (hMSCs) are experimentally relevant cells but, regardless the encouraging results reported after culture under dynamic conditions in bioreactors, show important limitations for tissue engineering applications, especially considering their limited proliferative potential, loss of functionality following protracted expansion, and decline in cellular fitness associated with aging. On the other hand, we previously demonstrated that human embryonic stem cell-derived mesodermal progenitors (hES-MPs) hold great potential to provide a homogenous and unlimited source of cells for bone engineering applications. Based on prior scientific evidence using different types of stem cells, in the present study we hypothesized that dynamic culture of hES-MPs in a packed bed/column bioreactor had the potential to affect proliferation, expression of genes involved in osteogenic differentiation, and matrix mineralization, therefore resulting in increased bone-like tissue formation. The reported findings suggest that hES-MPs constitute a suitable alternative cell source to hMSCs and hold great potential for the construction of bone substitutes for tissue engineering applications in clinical settings.
|
|
| 2. |
- de Peppo, Giuseppe Maria, 1981, et al.
(author)
-
Osteogenic Potential of Human Mesenchymal Stem Cells and Human Embryonic Stem Cell-Derived Mesodermal Progenitors: A Tissue Engineering Perspective.
- 2010
-
In: Tissue engineering. Part A. - : Mary Ann Liebert Inc. - 1937-335X .- 1937-3341. ; 16:11, s. 3413-3426
-
Journal article (peer-reviewed)abstract
- Introduction: Human mesenchymal stem cells (hMSCs) are promising candidates for bone engineering and regeneration with a considerable number of experimental successes reported over the last years. However, hMSCs show several limitations for tissue engineering applications, which can be overcome by using human embryonic stem cell-derived mesodermal progenitors (hES-MPs). The aim of this study was to investigate and compare the osteogenic differentiation potential of hMSCs and hES-MPs. Materials and Methods: The osteogenic differentiation and mineralization behavior of both cell types were evaluated at passage 5, 10, 15, and 20. Expression of COL1A1, RUNX2, OPN, and OC was evaluated by reverse transcription (RT)-polymerase chain reaction, whereas mineralization was examined by photospectrometry, von Kossa staining, and time-of-flight secondary ion mass spectrometry. The immunoprofile of both cell types was investigated by flow cytometry. Results: We demonstrated that, under proper stimulation, hES-MPs undergo osteogenic differentiation and exhibit significantly increased mineralization ability compared to hMSCs after protracted expansion. hES-MPs were also found to express lower amount of human leukocyte antigens class II proteins. Conclusions: The high osteogenic ability of hES-MPs, together with low expression of human leukocyte antigens class II, makes these cells an attractive alternative for bulk production of cells for bone engineering applications.
|
|
| 3. |
- de Peppo, Giuseppe Maria, 1981, et al.
(author)
-
Osteogenic response of human mesenchymal stem cells to well-defined nanoscale topography in vitro
- 2014
-
In: International journal of nanomedicine. - : Informa UK Limited. - 1176-9114 .- 1178-2013. ; 9:1, s. 2499-2515
-
Journal article (peer-reviewed)abstract
- Background: Patterning medical devices at the nanoscale level enables the manipulation of cell behavior and tissue regeneration, with topographic features recognized as playing a significant role in the osseointegration of implantable devices. Methods: In this study, we assessed the ability of titanium-coated hemisphere-like topographic nanostructures of different sizes (approximately 50, 100, and 200 nm) to influence the morphology, proliferation, and osteogenic differentiation of human mesenchymal stem cells (hMSCs). Results: We found that the proliferation and osteogenic differentiation of hMSCs was influenced by the size of the underlying structures, suggesting that size variations in topographic features at the nanoscale level, independently of chemistry, can be exploited to control hMSC behavior in a size-dependent fashion. Conclusion: Our studies demonstrate that colloidal lithography, in combination with coating technologies, can be exploited to investigate the cell response to well defined nanoscale topography and to develop next-generation surfaces that guide tissue regeneration and promote implant integration.
|
|
| 4. |
- Johansson, Martin L, et al.
(author)
-
Long-term osseointegration of laser-ablated hearing implants in sheep cranial bone
- 2022
-
In: Frontiers in Surgery. - : Frontiers Media SA. - 2296-875X. ; 9
-
Journal article (peer-reviewed)abstract
- Osseointegration, the ability for an implant to be anchored in bone tissue with direct bone-implant contact and allowing for continuous adaptive remodelling, is clinically used in different reconstructive fields, such as dentistry, orthopedics and otology. The latter uses a bone conducting sound processor connected to a skin-penetrating abutment that is mounted on a titanium implant placed in the temporal bone, thereby acting as a path for transmission of the vibrations generated by the sound processor. The success of the treatment relies on bone healing and osseointegration, which could be improved by surface modifications. The aim of this study was to evaluate the long-term osseointegration in a sheep skull model and compare a laser-ablated implant surface with a machined implant. Commercially available 4mm titanium implants, either with a machined (Wide Ponto) or a laser-ablated surface (Ponto BHX, Oticon Medical, Sweden), were used in the current study. The surfaces were evaluated by scanning electron microscopy. The implantation was performed with a full soft tissue flap and the osteotomy was prepared using the MIPS drill kit (Oticon Medical, Sweden) prior to installation of the implants in the frontal bone of eight female sheep. After five months, biopsies including the implant and surrounding bone tissue obtained, processed and analysed using histology, histomorphometry, scanning electron microscopy and Raman spectroscopy. The animals healed well, without signs of adverse events. Histomorphometry showed a large amount of bone tissue around both implant types, with 75% of the threaded area occupied by bone for both implant types. A large amount of bone-implant contact was observed for both implant types, with 67%–71% of the surface covered by bone. Both implant types were surrounded by mature remodelled lamellar bone with high mineral content, corroborating the histological observations. The current results show that the laser-ablated surface induces healing similar to the well-known clinically used machined surface in ovine cranial bone. In conclusion, the present long-term experimental results indicate that a laser-ablated implant performs equally well as a clinically used implant with a machined surface. This, together with previously reported, improved early biomechanical anchorage, suggests future, safe and efficient clinical potential.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Sennerby, Lars, 1960, et al.
(author)
-
Influence of indomethacin on the regeneration of cortical bone within titanium implants in rabbits.
- 1993
-
In: Biomaterials. - : Elsevier BV. - 0142-9612. ; 14:2, s. 156-8
-
Journal article (peer-reviewed)abstract
- The influence of indomethacin on cortical bone regeneration was studied in bone harvest chambers made of commercially pure titanium and inserted in rabbit tibia. Newly formed bone was harvested in situ every 3 wk for 33 wk. Indomethacin (1 mg/kg body weight) was given daily as subcutaneous injections for two periods, followed by two control periods with no drug administration and the same schedule was followed for indomethacin at a dose of 4 mg/kg body weight. These indomethacin dosages did not statistically influence the cortical bone regeneration.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
