| 1. |
|
|
| 2. |
- Luckrin, J. M., et al.
(författare)
-
A synthesis of hybrid RANS/LES CFD results for F-16XL aircraft aerodynamics
- 2015
-
Ingår i: 33rd AIAA Applied Aerodynamics Conference. - Reston, Virginia : American Institute of Aeronautics and Astronautics (AIAA). - 9781624103636
-
Konferensbidrag (refereegranskat)abstract
- A synthesis is presented of recent numerical predictions for the F-16XL aircraft flow fields and aerodynamics. The computational results were all performed with hybrid RANS/LES formulations, with an emphasis on unsteady flows and subsequent aerodynamics, and results from five computational methods are included. The work was focused on one particular low-speed, high angle-of-attack flight test condition, and comparisons against flight-test data are included. This work represents the third coordinated effort using the F-16XL aircraft, and a unique flight-test data set, to advance our knowledge of slender airframe aerodynamics as well as our capability for predicting these aerodynamics with advanced CFD formulations. The prior efforts were identified as Cranked Arrow Wing Aerodynamics Project International, with the acronyms CAWAPI and CAWAPI-2.
|
|
| 3. |
|
|
| 4. |
- Goetzendorf-Grabowski, Tomas, et al.
(författare)
-
Coupling Adaptive-Fidelity CFD with S&C Analysis to Predict Flying Qualities
- 2009
-
Ingår i: 27th AIAA Applied Aerodynamics Conference.
-
Konferensbidrag (refereegranskat)abstract
- CEASIOM, the Computerized Environment for Aircraft Synthesis and Integrated Optimization Methods, is a framework tool that integrates discipline-specific tools for conceptual design. At this early stage of the design it is very useful to be able to predict the °ying and handling qualities of this design. In order to do this, the aerodynamic database needs to be computed for the configuration being studied which then has to be coupled to the stability and control tools to carry out the analysis. This paper describes how the adaptive-fidelity CFD module of CEASIOM computes the aerodynamic dataset of an air craft configuration, and how that dataset is analyzed by the SDSA module to determine the °ying qualities of the aircraft. These predicted °ying qualities are then compared with the °ight-test data of the Ranger 2000 trainer aircraft in order to verify the goodness of the overall approach.
|
|
| 5. |
- Mendenhall, M.R., et al.
(författare)
-
Comparing and benchmarking engineering methods for the prediction of X-31 aerodynamics
- 2012
-
Ingår i: Aerospace Science and Technology. - : Elsevier BV. - 1270-9638 .- 1626-3219. ; 20:1, s. 12-20
-
Tidskriftsartikel (refereegranskat)abstract
- A number of useful engineering methods are available for fast and economic estimates of the aerodynamic characteristics of complex flight vehicles. This article investigates the application of three specific engineering methods to the X-31 fighter configuration, and CFD, wind tunnel, and flight test data are used for comparison and evaluation purposes. The emphasis is on static longitudinal stability aspects up to high angles of attack; however, selected asymmetric and unsteady effects are considered. Results from the engineering methods are in good agreement with experiment and CFD for angles of attack up to 15° for most cases and higher angles for some cases. Results for pitching moment are in good agreement with CFD, but many of the nonlinear characteristics of the airplane are not predicted by the engineering methods. The quality of the longitudinal stability results is discussed in terms of the prediction of the center of pressure on the vehicle. The results provide improved understanding of the continued usefulness of engineering methods as an analysis tool during the design phase and into the flight test diagnostic phase of a new aircraft.
|
|
| 6. |
|
|
| 7. |
- Tomac, Maximilian, et al.
(författare)
-
Comparing & benchmarking engineering methods on the prediction of X-31 aerodynamics
- 2010
-
Ingår i: 28th AIAA Applied Aerodynamics Conference. - Reston, Virigina : American Institute of Aeronautics and Astronautics. - 9781617389269 ; , s. 2010-4694-
-
Konferensbidrag (refereegranskat)abstract
- NATO RTO-AVT-161 is an assessment of Stability and Control Prediction Methods for NATO Air and Sea Vehicles. Though the assessment includes the use of advanced CFD methods, a number of useful engineering methods are available for fast and economic estimates of the aerodynamic characteristics of complex flight vehicles. The objective of this paper is to investigate the use of three specific engineering methods on the X-31 fighter configuration for which CFD, wind tunnel, and flight test data are available for comparison and evaluation purposes. The emphasis is on static longitudinal stability aspects up to high angles of attack; however, selected asymmetric and unsteady effects are considered. Results from the engineering methods are in good agreement with experiment and CFD for angles of attack up to 15 degrees for most cases and higher angles for some cases. Results for pitching moment are in good agreement with CFD, but many of the nonlinear characteristics of the airplane are not predicted by the engineering methods. The quality of the longitudinal stability results is discussed in terms of the prediction of the center of pressure on the vehicle. The results provide improved understanding of the continued usefulness of engineering methods as an analysis tool during the design phase and into the flight test diagnostic phase of a new aircraft.
|
|
| 8. |
- Tomac, Maximillian, et al.
(författare)
-
Engineering methods applied to an unmanned combat air vehicle configuration
- 2012
-
Ingår i: Journal of Aircraft. - 0021-8669 .- 1533-3868. ; 49:6, s. 1610-1618
-
Tidskriftsartikel (refereegranskat)abstract
- Engineering methods provide fast and economic predictions of the aerodynamic characteristics of complex flight vehicles. This paper investigates the application of three specific engineering methods to a unmanned combat air vehicle (UCAV) configuration, termed the Stability and Control Configuration (SACCON), that is still under investigation and that is the subject of an intensive computational and experimental study by the NATO Research and Technology Organization task group AVT-161 for better understanding of its stability and control characteristics. Computational fluid dynamics (CFD) data are computed for theSACCONat wind-tunnel conditions and are compared and evaluated against the measured values, especially in terms of their implications for low-speed longitudinal flight characteristics. Because of their reduced-order modeling compared with Reynolds-averaged Navier-Stokes CFD, predictions by the engineering methods are restricted to the flight-condition range governed by linear flow physics, which, for the SACCON in low speed is 0 α 10 deg. Despite the limited range in angle of attack, it was discovered that, due to the large sweep angle of theSACCONwing and its tip section of zero taper ratio, peak suction levels at the tip were so high that the boundary layer separated there instead. This viscous effect caused a discrepancy between the predicted and measured values of the pitching moment. The remedy taken was to increase the washout for theSACCONwing by modifying its twist and camber, and predictions made for this shape confirmed that linear flow physics prevailed then and that the static stability margin was increased. Furthermore, a series of predictions were made at high speed to establish the drag-divergence Mach numberMdd. The investigations carried out here demonstrate the continued usefulness of engineering methods not only as an analysis tool during the initial aircraft design phase but also as a design tool to improve the shape definition of the vehicle to achieve better performance.
|
|
| 9. |
|
|
| 10. |
- Tomac, Maximilian, et al.
(författare)
-
Unsteady aero-loads from vortices shed on A320 landing gear door : CFD compared to flight tests
- 2016
-
Ingår i: 54th AIAA Aerospace Sciences Meeting. - Reston, Virginia : American Institute of Aeronautics and Astronautics. - 9781624103933
-
Konferensbidrag (refereegranskat)abstract
- AFLoNext is a project of four years duration, funded by the European Commission within the Seventh Framework Programme. The project’s main objectives are proving and maturing highly promising flow control and noise reduction technologies for novel aircraft configurations, to achieve a big step forward towards improved aircraft performance and thus reducing the environmental footprint. The project consortium is composed by 40 European partners from 15 countries. One of the six technology streams, which are forming the scientific concept of AFLoNext, is concerned with the mitigation and control of vibrations in the undercarriage area during take-off and landing. Structural components in the vicinity of the landing gears, e.g. undercarriage housing walls, struts or landing gear doors, are often subject to significant dynamic loading. These loads originate from fluctuating aerodynamic pressures and resulting structural vibrations. Unsteady pressures on structural parts are caused by highly fluctuating and complex aerodynamic flow behavior under the fuselage. The paper describes the CFD approach employed to predict such dynamic loads and presents some preliminary results that have been computed with hybrid RANS-LES models and the Lattice Bolzmann method. Several vibration control devices have been proposed and are discussed in the paper. Some of these devices will be installed in the near future on the DLR Airbus 320 ATRA (Advanced Technology Research Aircraft) to perform flight tests to and to measure dynamic loads.
|
|
