| 1. |
- Abdollahi, Farnoosh, et al.
(författare)
-
Angiogenesis in bone tissue engineering via ceramic scaffolds: A review of concepts and recent advancements
- 2024
-
Ingår i: Biomaterials Advances. - : Elsevier BV. - 2772-9516 .- 2772-9508. ; 159
-
Forskningsöversikt (refereegranskat)abstract
- Due to organ donor shortages, long transplant waitlists, and the complications/limitations associated with auto and allotransplantation, biomaterials and tissue-engineered models are gaining attention as feasible alternatives for replacing and reconstructing damaged organs and tissues. Among various tissue engineering applications, bone tissue engineering has become a promising strategy to replace or repair damaged bone. We aimed to provide an overview of bioactive ceramic scaffolds in bone tissue engineering, focusing on angiogenesis and the effect of different biofunctionalization strategies. Different routes to angiogenesis, including chemical induction through signaling molecules immobilized covalently or non-covalently, in situ secretion of angiogenic growth factors, and the degradation of inorganic scaffolds, are described. Physical induction mechanisms are also discussed, followed by a review of methods for fabricating bioactive ceramic scaffolds via microfabrication methods, such as photolithography and 3D printing. Finally, the strengths and weaknesses of the commonly used methodologies and future directions are discussed.
|
|
| 2. |
- Afrasiabi, Roodabeh, et al.
(författare)
-
Microwave mediated synthesis of semiconductor quantum dots
- 2012
-
Ingår i: Physica Status Solidi. C, Current topics in solid state physics. - : Wiley. - 1610-1634 .- 1610-1642. ; 9:7, s. 1551-1556
-
Tidskriftsartikel (refereegranskat)abstract
- Colloidal quantum dots (QD) have tuneable optoelectronic properties and can be easily handled by simple solution processing techniques, making them very attractive for a wide range of applications. Over the past decade synthesis of morphology controlled high quality (crystalline, monodisperse) colloidal QDs by thermal decomposition of organometallic precursors has matured and is well studied. Recently, synthesis of colloidal QDs by microwave irradiation as heating source is being studied due to the inherently different mechanisms of heat transfer, when compared to solvent convection based heating. Under microwave irradiation, polar precursor molecules directly absorb the microwave energy and heat up more efficiently. Here we report synthesis of colloidal II-VI semiconductor QDs (CdS, CdSe, CdTe) by microwave irradiation and compare it with conventional synthesis based on convection heating. Our findings show that QD synthesis by microwave heating is more efficient and the chalcogenide precursor strongly absorbs the microwave radiation shortening the reaction time and giving a high reaction yield.
|
|
| 3. |
|
|
| 4. |
- Akan, Rabia
(författare)
-
Metal-assisted chemical etching for nanofabrication of hard X-ray zone plates
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Hard X-ray scanning microscopes, or nanoprobes, make it possible to image samples and probe their chemical, elemental and structural properties at nanoscale resolution. This is enabled by the use of nanofocusing optics. Commonly used optics in nanoprobes for high resolution X-ray experiments are zone plates. Zone plates are circular diffraction optics with radially decreasing grating periods. Their performance depends on their geometrical properties and material. The width of the outermost zone, which today is in the order of a few tens of nanometers, defines the zone plate resolution, while the zone thickness and the material define the X-ray focusing efficiency. For hard X-ray zone plates, the required zone thickness is several micrometers. Therefore, high-aspect ratio nanostructures are a prerequisite for high-resolution, high-efficiency zone plates. The very small structures together with the high-aspect ratios make zone plates one of the most challenging devices to fabricate. A wet-chemical nanofabrication process that has proved its capability of providing silicon nanostructures with ultra-high aspect ratios is metal-assisted chemical etching (MACE). MACE is an electroless, autocatalytic pattern transfer method that uses an etching solution to selectively etch a predefined noble metal pattern into silicon. In this thesis, MACE is optimized specifically for zone plate nanostructures and used in the development of a new zone plate device nanofabrication process. The MACE optimization for silicon zone plate nanostructures involved a systematic investigation of a wide parameter space. The preferable etching solution composition, process temperature, zone plate catalyst design and silicon type were identified. Parameter dependencies were characterized with respect to etching depth and verticality, mechanical stability of zones and silicon surface roughness. Zone plate molds with aspect ratios of 30:1 at 30 nm zone widths were nanofabricated using the optimized MACE process. For use with hard X-rays, the silicon molds were metallized with palladium using electroless deposition (ELD). The first order diffraction efficiency of such a palladium/silicon zone plate was characterized as 1.9 %. Both MACE for the zone plate pattern transfer and ELD for the silicon mold metalization are conceptually simple, relatively low-cost and accessible methods, which opens up for further developments of zone plate device nanofabrication processes.
|
|
| 5. |
- Akan, Rabia, et al.
(författare)
-
Reaction control of metal-assisted chemical etching for silicon-based zone plate nanostructures
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Metal-assisted chemical etching (MACE) reaction parameters were investigated for the fabrication of specially designed silicon-based x-ray zone plate nanostructures using a gold catalyst pattern and etching solutions composed of HF and H2O2. Etching depth, zone verticality and zone roughness were studied as a function of etching solution composition, temperature and processing time. Homogeneous, vertical etching with increasing depth is observed at increasing H2O2 concentrations and elevated processing temperatures, implying a balance in the hole injection and silica dissolution kinetics at the gold-silicon interface. The etching depth decreases and zone roughness increases at the highest investigated H2O2 concentration and temperature. Possible reasons for these observations are discussed based on reaction chemistry and zone plate design. Optimum MACE conditions are found at HF:H2O2 concentrations of 4.7 M:0.68 M and room temperature with an etching rate of 0.7 micrometers per minute, which is about an order of magnitude higher than previous reports. Moreover, our results show that a grid catalyst design is important for successful fabrication of vertical high aspect ratio silicon nanostructures.
|
|
| 6. |
- Akman, O., et al.
(författare)
-
Magnetic metal nanoparticles coated polyacrylonitrile textiles as microwave absorber
- 2013
-
Ingår i: Journal of Magnetism and Magnetic Materials. - : Elsevier BV. - 0304-8853 .- 1873-4766. ; 327, s. 151-158
-
Tidskriftsartikel (refereegranskat)abstract
- Polyacrylonitrile (PAN) textiles with 2 mm thickness are coated with magnetic nanoparticles in coating baths with Ni, Co and their alloys via an electroless metal deposition method. The crystal structure, morphology and magnetic nature of composites are investigated by X-ray Powder diffraction, Scanning Electron Microscopy, and dc magnetization measurement techniques. The frequency dependent microwave absorption measurements have been carried out in the frequency range of 12.4-18 GHz (X and P bands). Diamagnetic and ferromagnetic properties are also investigated. Finally, the microwave absorption of composites is found strongly dependent on the coating time. One absorption peak is observed between 14.3 and 15.8 GHz with an efficient absorption bandwidth of 3.3-4.1 GHz (under -20 dB reflection loss limit). The Reflection loss (RL) can be achieved between -30 and -50 dB. It was found that the RL is decreasing and absorption bandwidth is decreasing with increasing coating time. While absorption peak moves to lower frequencies in Ni coated PAN textile, it goes higher frequencies in Co coated ones. The Ni-Co alloy coated composites have fluctuating curve of absorption frequency with respect to coating time. These results encourage further development of magnetic nanoparticle coated textile absorbers for broadband applications.
|
|
| 7. |
- Al-Farsi, Hissa M., et al.
(författare)
-
Effects of the Antimicrobial Peptide LL-37 and Innate Effector Mechanisms in Colistin-Resistant Klebsiella pneumoniae With mgrB Insertions
- 2019
-
Ingår i: Frontiers in Microbiology. - : FRONTIERS MEDIA SA. - 1664-302X. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Background Colistin is a polypeptide antibiotic drug that targets lipopolysaccharides in the outer membrane of Gram-negative bacteria. Inactivation of the mgrB-gene is a common mechanism behind colistin-resistance in Klebsiella pneumoniae (Kpn). Since colistin is a cyclic polypeptide, it may exhibit cross-resistance with the antimicrobial peptide LL-37, and with other innate effector mechanisms, but previous results are inconclusive. Objective To study potential cross-resistance between colistin and LL-37, as well as with other innate effector mechanisms, and to compare virulence of colistin-resistant and susceptible Kpn strains. Materials/Methods Carbapenemase-producing Kpn from Oman (n = 17) were subjected to antimicrobial susceptibility testing and whole genome sequencing. Susceptibility to colistin and LL-37 was studied. The surface charge was determined by zeta-potential measurements and the morphology of treated bacteria was analyzed with electron microscopy. Bacterial survival was assessed in human whole blood and serum, as well as in a zebrafish infection-model. Results Genome-analysis revealed insertion-sequences in the mgrB gene, as a cause of colistin resistance in 8/17 isolates. Colistin-resistant (Col-R) isolates were found to be more resistant to LL-37 compared to colistin-susceptible (Col-S) isolates, but only at concentrations >= 50 mu g/ml. There was no significant difference in surface charge between the isolates. The morphological changes were similar in both Col-R and Col-S isolates after exposure to LL-37. Finally, no survival difference between the Col-R and Col-S isolates was observed in whole blood or serum, or in zebrafish embryos. Conclusion Cross-resistance between colistin and LL-37 was observed at elevated concentrations of LL-37. However, Col-R and Col-S isolates exhibited similar survival in serum and whole blood, and in a zebrafish infection-model, suggesting that cross-resistance most likely play a limited role during physiological conditions. However, it cannot be ruled out that the observed cross-resistance could be relevant in conditions where LL-37 levels reach high concentrations, such as during infection or inflammation.
|
|
| 8. |
- Alaghmandfard, A., et al.
(författare)
-
Recent advances in the modification of carbon-based quantum dots for biomedical applications
- 2021
-
Ingår i: Materials science & engineering. C, biomimetic materials, sensors and systems. - : Elsevier BV. - 0928-4931 .- 1873-0191. ; 120
-
Forskningsöversikt (refereegranskat)abstract
- Carbon-based quantum dots (CDs) are mainly divided into two sub-groups; carbon quantum dots (CQDs) and graphene quantum dots (GQDs), which exhibit outstanding photoluminescence (PL) properties, low toxicity, superior biocompatibility and facile functionalization. Regarding these features, they have been promising candidates for biomedical science and engineering applications. In this work, we reviewed the efforts made to modify these zero-dimensional nano-materials to obtain the best properties for bio-imaging, drug and gene delivery, cancer therapy, and bio-sensor applications. Five main surface modification techniques with outstanding results are investigated, including doping, surface functionalization, polymer capping, nano-composite and core-shell structures, and the drawbacks and challenges in each of these methods are discussed.
|
|
| 9. |
- Almessiere, M. A., et al.
(författare)
-
Effects of Ce-Dy rare earths co-doping on various features of Ni-Co spinel ferrite microspheres prepared via hydrothermal approach
- 2021
-
Ingår i: Journal of Materials Research and Technology. - : Elsevier BV. - 2238-7854 .- 2214-0697. ; 14, s. 2534-2553
-
Tidskriftsartikel (refereegranskat)abstract
- The effects of Ce-Dy co-doping on the crystal structure, optical, dielectric, magnetic properties, and hyperfine interactions of Ni-Co spinel ferrite microspheres synthesized hydrothermally have been studied. A series of ferrites with the general formula Ni0.5-Co0.5CexDyxFe2-2xO4 were synthesized with x values ranging from 0.00 to 0.10. The phase, crystallinity, and morphology of ferrite microspheres were analyzed by X-ray powder diffractometry (XRD), scanning and transmission electron microscopes (SEM and TEM), respectively. The structural analyses of the synthesized ferrite microspheres confirmed their high purity and cubic crystalline phase. The Diffuse reflectance spectroscopic (DRS) measurements were presented to calculate direct optical energy band gaps (E-g) and is found in the range 1.63 eV - 1.84 eV. Fe-57 Mossbauer spectroscopy showed that the hyperfine magnetic field of tetrahedral (A) and octahedral (B) sites decreased with the substitution of Dy3+-Ce3+ ions that preferrentially occupy the B site. The impact of the rare-earth content (x) on the magnetic features of the prepared NiCo ferrite microspheres was investigated by analyzing M-H loops, which showed soft ferrimagnetism. The magnetic features illustrate a great impact of the incorporation of Ce3+-Dy3+ ions within the NiCo ferrite structure. The saturation magnetization (M-s), remanence (M-r), and coercivity (H-c) increased gradually with increasing Ce-Dy content. At x = 0.04, M-s, M-r, and H-c attain maximum values of about 31.2 emu/g, 11.5 emu/g, and 512.4 Oe, respectively. The Bohr magneton (n(B)) and magneto-crystalline anisotropy constant (K-eff) were also determined and evaluated with correlation to other magnetic parameters. Further increase in Ce3+-Dy3+ content (i.e., x >= 0.06) was found to decrease M-s, M-r, and H-c values. The variations in magnetic parameters (M-s, M-r, and H-c) were largely caused by the surface spins effect, the variations in crystallite/particle size, the distribution of magnetic ions into the different sublattices, the evolutions of magneto-crystalline anisotropy, and the variations in the magnetic moment (n(B)). The squareness ratios were found to be lower than the predicted theoretical value of 0.5 for various samples, indicating that the prepared Ce-Dy substituted NiCo ferrite microspheres are composed of NPs with single-magnetic domain (SMD). Temperature and frequency-dependent electrical and dielectric measurements have been done to estimate the ac/dc conductivity, dielectric constant, and tangent loss values for all the samples. The ac conductivity measurements confirmed the power-law rules, largely dependent on Ce-Dy content. Impedance analysis stated that the conduction mechanisms in all samples are mainly due to the grains-grain boundaries. The dielectric constant of NiCo ferrite microspheres give rise to normal dielectric distribution, with the frequency depending strongly on the Ce-Dy content. The observed variation in tangential loss with frequency can be attributed to the conduction mechanism in ferrites, like Koop's phenomenological model.
|
|
| 10. |
- Almessiere, M. A., et al.
(författare)
-
Review on functional bi-component nanocomposites based on hard/soft ferrites : Structural, magnetic, electrical and microwave absorption properties
- 2021
-
Ingår i: Nano-Structures and Nano-Objects. - : Elsevier B.V.. - 2352-507X. ; 26
-
Tidskriftsartikel (refereegranskat)abstract
- Bi-component hard (H) (hexaferrite) and soft (S) (spinel) ferrites nanocomposites are gaining interest scientifically and technically, not only for combining the high magnetization of spinel ferrite nanomaterials and the high coercivity of hexaferrite magnetic nanomaterials but also for the outstanding exchange-coupling behavior among hard and soft magnetic phase. The improved magnetic features lead to produce a new nanocomposite with higher microwave absorption capacity in comparison with ferrites with a single absorption mechanism. Exchange-coupled effect has a potential application based on microwave absorption, recording media, permanent magnets, biomedical and other applications. Intensive studies have been conducted on this topic to produce hard/soft (H/S) ferrite nanocomposites with establishment of exchange coupled effect between the two phases. Preparation methods, microstructure, magnetics features, microwave and dielectric properties, and applications are elaborated. Consequently, a comprehensive effort has been made to contain an original reference investigating in detail the precise outcomes of the published papers.
|
|
