| 1. |
- Oji, U.K., et al.
(författare)
-
Implementation of time of flight polarized neutron imaging at IMAT-ISIS
- 2023
-
Ingår i: Materials & design. - : Elsevier. - 0264-1275 .- 1873-4197. ; 235
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, we report the first case of design and implementation of a polarized neutron imaging option on the Imaging and Materials Science & Engineering Station (IMAT). This is a significant addition to the capabilities of the station that allows the characterization of advanced magnetic materials for different engineering applications. Combining its time-of-flight feature with a polarized beam yields data that facilitate both quantitative and qualitative analysis of magnetic materials. Using the simple field of an aluminium solenoid, we perform a characterization of the new setup. In addition, we present polarized measurements of additively manufactured (AM) MnAl samples where the magnetic anisotropy due to the fabrication process has been investigated as a first scientific application of the setup. The results indicate that the anisotropy of the material can be engineered through variation of the AM fabrication parameters.
|
|
| 2. |
|
|
| 3. |
- Cereser, Alberto, et al.
(författare)
-
Time-of-Flight Three Dimensional Neutron Diffraction in Transmission Mode for Mapping Crystal Grain Structures
- 2017
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- The physical properties of polycrystalline materials depend on their microstructure, which is the nano- to centimeter scale arrangement of phases and defects in their interior. Such microstructure depends on the shape, crystallographic phase and orientation, and interfacing of the grains constituting the material. This article presents a new non-destructive 3D technique to study centimeter-sized bulk samples with a spatial resolution of hundred micrometers: time-of-flight three-dimensional neutron diffraction (ToF 3DND). Compared to existing analogous X-ray diffraction techniques, ToF 3DND enables studies of samples that can be both larger in size and made of heavier elements. Moreover, ToF 3DND facilitates the use of complicated sample environments. The basic ToF 3DND setup, utilizing an imaging detector with high spatial and temporal resolution, can easily be implemented at a time-of-flight neutron beamline. The technique was developed and tested with data collected at the Materials and Life Science Experimental Facility of the Japan Proton Accelerator Complex (J-PARC) for an iron sample. We successfully reconstructed the shape of 108 grains and developed an indexing procedure. The reconstruction algorithms have been validated by reconstructing two stacked Co-Ni-Ga single crystals, and by comparison with a grain map obtained by post-mortem electron backscatter diffraction (EBSD).
|
|
| 4. |
- Tremsin, A. S., et al.
(författare)
-
High-Resolution Neutron Counting Sensor in Strain Mapping Through Transmission Bragg Edge Diffraction
- 2011
-
Ingår i: IEEE Sensors Journal. - 1558-1748. ; 11:12, s. 3433-3436
-
Tidskriftsartikel (refereegranskat)abstract
- High-resolution neutron counting sensors with microchannel plates coupled to a Timepix readout enable high spatial (similar to 55 mu m) and temporal (similar to 1 mu s) accuracy for each detected thermal and cold neutron. One of the attractive applications for those sensors is the high-resolution strain mapping in engineering samples through transmission Bragg edge diffraction. The unique combination of high detection efficiency (up to 70%), high spatial and temporal resolution of, detectors enable similar to 100 mu m strain mapping with similar to 100 mu strain accuracy. We present the results of proof of principle measurements performed at ROTAX beamline at ISIS spallation neutron source. Strain map of a bent steel sample is measured with very high spatial resolution. The same sensors enable high-resolution nondestructive studies in such diverse areas as neutron microtomography, dynamics of fuel injection, material composition, archaeology, water propagation and many others.
|
|
| 5. |
- Tremsin, A. S., et al.
(författare)
-
Imaging of dynamic magnetic fields with spin-polarized neutron beams
- 2015
-
Ingår i: New Journal of Physics. - : IOP Publishing. - 1367-2630. ; 17
-
Tidskriftsartikel (refereegranskat)abstract
- Precession of neutron spin in a magnetic field can be used for mapping of a magnetic field distribution, as demonstrated previously for static magnetic fields at neutron beamline facilities. The fringing in the observed neutron images depends on both the magnetic field strength and the neutron energy. In this paper we demonstrate the feasibility of imaging periodic dynamic magnetic fields using a spin-polarized cold neutron beam. Our position-sensitive neutron counting detector, providing with high precision both the arrival time and position for each detected neutron, enables simultaneous imaging of multiple phases of a periodic dynamic process with microsecond timing resolution. The magnetic fields produced by 5- and 15-loop solenoid coils of 1 cm diameter, are imaged in our experiments with similar to 100 mu m resolution for both dc and 3 kHz ac currents. Our measurements agree well with theoretical predictions of fringe patterns formed by neutron spin precession. We also discuss the wavelength dependence and magnetic field quantification options using a pulsed neutron beamline. The ability to remotely map dynamic magnetic fields combined with the unique capability of neutrons to penetrate various materials (e.g., metals), enables studies of fast periodically changing magnetic processes, such as formation of magnetic domains within metals due to the presence of ac magnetic fields.
|
|
