| 1. |
- Mallhi, Tauqeer Hussain, et al.
(författare)
-
Mental Health and Coping Strategies among University Staff during the COVID-19 Pandemic : A Cross-Sectional Analysis from Saudi Arabia
- 2023
-
Ingår i: Sustainability. - : MDPI. - 2071-1050. ; 15:11
-
Tidskriftsartikel (refereegranskat)abstract
- This study examined psychological health and coping strategies among faculty and staff at a Saudi Arabian university. A web-based self-administered survey was used to assess probable anxiety, depression, post-traumatic stress disorder (PTSD), and coping strategies by using the Generalized Anxiety Disorder-7 (GAD-7), Patient Health Questionnaire-9 (PHQ-9), Impact of Event Scale-Revised (IES-R), and Brief-COPE scale, respectively. Of 502 participants (mean age 36.04 +/- 10.32 years, male: 66.3%), 24.1% (GAD-7 >= 10) had probable anxiety. Anxiety score was significantly higher in females (p < 0.001), those with a history of COVID-19 infection (p = 0.036), and participants with less work experience (p = 0.019). Approximately 40% of participants met the criteria of probable depression, with females (p < 0.001) and participants with less experience having more depressive symptoms. Around one-fourth (27.7%) of study participants indicated probable PTSD (score +/- 33), with higher symptoms in females (p <0.001), less experienced staff (p < 0.00 1), and academic staff (p = 0.006). Correlation analysis indicated a significant positive correlation between anxiety and depression (r = 0.844, p < 0.001), anxiety and PTSD (r = 0.650, p < 0.001), and depression and PTSD (r = 0.676, p < 0.001). Active coping, religious/spiritual coping, and acceptance were common coping strategies, while substance use was the least adopted coping method among the study participants. This study indicated a high prevalence of probable psychological ailments among university staff.
|
|
| 2. |
- Salman, Muhammad, et al.
(författare)
-
Trajectory of COVID-19 vaccine hesitancy post-vaccination and public's intention to take booster vaccines : A cross-sectional analysis
- 2023
-
Ingår i: Human Vaccines & Immunotherapeutics. - : Taylor & Francis. - 2164-5515 .- 2164-554X. ; 19:2
-
Tidskriftsartikel (refereegranskat)abstract
- Vaccine hesitancy (VH) is not a new phenomenon in Pakistan and is regarded as one of the primary causes of unsatisfactory vaccination campaigns. This study determined post-vaccination COVID-19 VH, factors influencing COVID-19 vaccine uptake, and public's intent to receive booster vaccinations. A cross-sectional study was conducted among adult population of Lahore, Pakistan. Participants were recruited via convenience sampling between March and May 2022. SPSS version 22 was used for the data analysis. A total of 650 participants were included in the study (age = 28.1 & PLUSMN; 9.7 years; male-to-female ratio nearly 1: 1). The majority of participants received Sinopharm followed by Sinovac vaccine. The top three reasons of vaccine uptake were "only vaccinated individuals are allowed at the workplace, and educational institutes" (Relative importance index (RII) = 0.749), "only vaccinated people are allowed to go to markets, malls and other public places" (RII = 0.746), and "protect myself from the infection" (RII = 0.742). The mean COVID-19 VH score was 24.5 & PLUSMN; 6.2 (95% CI 23.9-24.9), with not being pro-vaccines and poor economic status were the significant predictors of COVID-19 vaccine hesitancy among immunized individuals (p < .05). Acceptance of booster vaccines was negatively associated with younger age and a lower level of education. Furthermore, being pro-vaccine was associated with a greater likelihood of accepting booster vaccines (p = .001). The Pakistani public continues to express VH toward COVID-19 vaccines. Therefore, aggressive measures must be taken to combat the community factors that contribute to it.
|
|
| 3. |
- Mallhi, Tauqeer Hussain, et al.
(författare)
-
Atypical Complications during the Course of COVID-19 : A Comprehensive Review
- 2024
-
Ingår i: Medicina. - : MDPI. - 1010-660X .- 1648-9144. ; 60:1
-
Forskningsöversikt (refereegranskat)abstract
- COVID-19 is primarily a respiratory disease, but numerous studies have indicated the involvement of various organ systems during the course of illness. We conducted a comprehensive review of atypical complications of COVID-19 with their incidence range (IR) and their impact on hospitalization and mortality rates. We identified 97 studies, including 55 research articles and 42 case studies. We reviewed four major body organ systems for various types of atypical complications: (i) Gastro-intestinal (GI) and hepatobiliary system, e.g., bowel ischemia/infarction (IR: 1.49-83.87%), GI bleeding/hemorrhage (IR: 0.47-10.6%), hepatic ischemia (IR: 1.0-7.4%); (ii) Neurological system, e.g., acute ischemic stroke/cerebral venous sinus thrombosis/cerebral hemorrhage (IR: 0.5-90.9%), anosmia (IR: 4.9-79.6%), dysgeusia (IR: 2.8-83.38%), encephalopathy/encephalitis with or without fever and hypoxia (IR: 0.19-35.2%); (iii) Renal system, e.g., acute kidney injury (AKI)/acute renal failure (IR: 0.5-68.8%); (iv) Cardiovascular system, e.g., acute cardiac injury/non-coronary myocardial injury (IR: 7.2-55.56%), arrhythmia/ventricular tachycardia/ventricular fibrillation (IR: 5.9-16.7%), and coagulopathy/venous thromboembolism (IR: 19-34.4%). This review encourages and informs healthcare practitioners to keenly monitor COVID-19 survivors for these atypical complications in all major organ systems and not only treat the respiratory symptoms of patients. Post-COVID effects should be monitored, and follow-up of patients should be performed on a regular basis to check for long-term complications.
|
|
| 4. |
- Ahmad, Naveed, et al.
(författare)
-
The nexus of csr and co-creation : A roadmap towards consumer loyalty
- 2021
-
Ingår i: Sustainability (Switzerland). - : MDPI AG. - 2071-1050. ; 13:2
-
Tidskriftsartikel (refereegranskat)abstract
- Corporate Social Responsibility (CSR) is regarded as an effort to be undertaken by the businesses to contribute towards society at large positively. The idea behind the concept of CSR is that businesses are required to pursue the notion of pro-social objectives along with economic objectives. Research has long established that corporate social responsibility, along with its philanthropic nature, can also produce extraordinary marketing results for businesses. The relationship between CSR and consumer loyalty is well acknowledged in extant literature. Likewise, involving consumers through co-creation in the product/service development process may provide an exciting experience to consumers, which is likely to influence their loyalty. With these arguments, the present research investigates the impact of CSR on consumer loyalty with the mediating role of co-creation in the banking sector of an emerging economy such as Pakistan. Structural equation modeling (SEM) is used for data analysis in the present study. The results validate that CSR improves consumer loyalty, and co-creation partially mediates this relationship. The results of the current survey will help banking institutions to identify how they can develop core strategic considerations based on CSR and co-creation.
|
|
| 5. |
- Ail, Ujwala, et al.
(författare)
-
Room temperature synthesis of transition metal silicide-conducting polymer micro-composites for thermoelectric applications
- 2017
-
Ingår i: Synthetic metals. - : Elsevier BV. - 0379-6779 .- 1879-3290. ; 225, s. 55-63
-
Tidskriftsartikel (refereegranskat)abstract
- Organic polymer thermoelectrics (TE) as well as transition metal (TM) silicides are two thermoelectric class of materials of interest because they are composed of atomic elements of high abundance; which is a prerequisite for mass implementation of thermoelectric (TE) solutions for solar and waste heat recovery. But both materials have drawbacks when it comes to finding low-cost manufacturing. The metal silicide needs high temperature (>1000 °C) for creating TE legs in a device from solid powder, but it is easy to achieve long TE legs in this case. On the contrary, organic TEs are synthesized at low temperature from solution. However, it is difficult to form long legs or thick films because of their low solubility. In this work, we propose a novel method for the room temperature synthesis of TE composite containing the microparticles of chromium disilicide; CrSi2 (inorganic filler) in an organic matrix of nanofibrillated cellulose- poly(3,4-ethyelenedioxythiophene)-polystyrene sulfonate (NFC-PEDOT:PSS). With this method, it is easy to create long TE legs in a room temperature process. The originality of the approach is the use of conducting polymer aerogel microparticles mixed with CrSi2 microparticles to obtain a composite solid at room temperature under pressure. We foresee that the method can be scaled up to fabricate and pattern TE modules. The composite has an electrical conductivity (σ) of 5.4 ± 0.5 S/cm and the Seebeck coefficient (α) of 88 ± 9 ΌV/K, power factor (α2σ) of 4 ± 1 ΌWm−1K−2 at room temperature. At a temperature difference of 32 °C, the output power/unit area drawn across the load, with the resistance same as the internal resistance of the device is 0.6 ± 0.1 ΌW/cm2.
|
|
| 6. |
- Arshad, Farzana, et al.
(författare)
-
Compact beam-switchable antenna for mm-wave 5G handheld devices
- 2021
-
Ingår i: IET Microwaves, Antennas & Propagation. - : WILEY. - 1751-8725 .- 1751-8733. ; 15:7, s. 778-787
-
Tidskriftsartikel (refereegranskat)abstract
- An electronically beam-steerable antenna (BSA) is envisioned. The presented BSA is a possible solution to overthrow the limitations inherent to phased antenna arrays. The design consists of a gap coupling inset feed rectangular patch (driven element) and 3 x 1 passive parasitic patches deployed on both sides of the driven patch. Prototype having 20 x 20 mm dimensions is printed on Rogers(R) RT/duroid(R)5870. Four switches are used to load the reactive impedance on parasitic patches, which in turn, change the phases of surface current on parasitic elements and the driven element. Based on the different ON and OFF configuration of switches in parasitic array elements, the main beam is steered along with different directions. The simulated results show that the design can operate between 26.8 and 30.3 GHz a wide impedance bandwidth |S-11|< -10 dB (12.5%) with a peak gain of 8.9 dBi and wide 3-dB scanning angle that is, -37 degrees to 156 degrees in the azimuth plane. The exhibited performance of BSA with favourable characteristics, such as wideband, adequate gain, wide-angle beam switching, and low profile renders the BSA a good candidate for 5G millimetre wave handheld devices. Moreover, to corroborate the performance, the design is fabricated, and experimental measurements were performed. Congruence is observed between the experimentally measured and computationally simulated results. The simulated results of spherical coverage analysis of BSA with the integration of smartphone form factor are also presented.
|
|
| 7. |
- Bubnova, Olga, et al.
(författare)
-
Advantageous thermoelectric properties of a semimetallic polymer
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Thermoelectric generation potentially holds a solution for waste heat recovery issues provided that the availability of inexpensive, biodegradable and highly efficient thermoelectric materials is insured in the near future. Plastic thermoelectrics could successfully comply with the said requirements if the thermoelectric efficiency (ZT) of conducting polymers was higher. However, given the novelty of the subject, at present there are no clear guidelines for ZT optimization in this class of materials. The most important piece of information that is currently missing is the description of a specific electronic makeup that conducting polymers must possess in order to enable good thermoelectric performance. In the present study the thermoelectric properties of poly(3,4-ethylenedioxythiophene) derivatives with two types of counterions, i.e. poly(styrenesulfonate) (PSS) and tosylate (Tos) are evaluated. A striking variation in their thermoelectric performance is attributed to structural and morphological differences between two polymers that manifest itself in dissimilar charge transport mechanism. The superior properties of PEDOT-Tos presumably originate from a high degree of crystallinity and structural order that predetermines the tendency for bipolaron band formation. Unlike polaronic PEDOT-PSS with slowly varying density of localized states (DOS) near the Fermi level (EF), the DOS in PEDOT-Tos is characterized by higher asymmetry and higher charge carrier density at EF (similar to semimetals), which allows for higher thermopower and electrical conductivity. Therefore, we conclude that the polymers with semimetallic electronic makeup are expected to exhibit promising thermoelectric properties with bigger variation in thermopower upon doping.
|
|
| 8. |
- Bubnova, Olga, et al.
(författare)
-
Corrigendum: Semi-metallic polymers
- 2014
-
Ingår i: Nature Materials. - : Springer Science and Business Media LLC. - 1476-1122 .- 1476-4660. ; 13, s. 662-662
-
Tidskriftsartikel (refereegranskat)
|
|
| 9. |
- Bubnova, Olga, et al.
(författare)
-
Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)
- 2011
-
Ingår i: NATURE MATERIALS. - : Nature Publishing Group. - 1476-1122 .- 1476-4660. ; 10:6, s. 429-433
-
Tidskriftsartikel (refereegranskat)abstract
- Thermoelectric generators (TEGs) transform a heat flow into electricity. Thermoelectric materials are being investigated for electricity production from waste heat (co-generation) and natural heat sources. For temperatures below 200 degrees C, the best commercially available inorganic semiconductors are bismuth telluride (Bi2Te3)-based alloys, which possess a figure of merit ZT close to one(1). Most of the recently discovered thermoelectric materials with ZT andgt; 2 exhibit one common property, namely their low lattice thermal conductivities(2,3). Nevertheless, a high ZT value is not enough to create a viable technology platform for energy harvesting. To generate electricity from large volumes of warm fluids, heat exchangers must be functionalized with TEGs. This requires thermoelectric materials that are readily synthesized, air stable, environmentally friendly and solution processable to create patterns on large areas. Here we show that conducting polymers might be capable of meeting these demands. The accurate control of the oxidation level in poly(3,4-ethylenedioxythiophene) (PEDOT) combined with its low intrinsic thermal conductivity (lambda = D 0.37W m(-1) K-1) yields a ZT = 0.25 at room temperature that approaches the values required for efficient devices.
|
|
| 10. |
- Bubnova, Olga, et al.
(författare)
-
Semi-metallic polymers
- 2014
-
Ingår i: Nature Materials. - : Nature Publishing Group. - 1476-1122 .- 1476-4660. ; 13:2, s. 190-194
-
Tidskriftsartikel (refereegranskat)abstract
- Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies demonstrated that they can possess insulating, semiconducting or metallic properties; here we report that polymers can also be semi-metallic. Semi-metals, exemplified by bismuth, graphite and telluride alloys, have no energy bandgap and a very low density of states at the Fermi level. Furthermore, they typically have a higher Seebeck coefficient and lower thermal conductivities compared with metals, thus being suitable for thermoelectric applications. We measure the thermoelectric properties of various poly( 3,4-ethylenedioxythiophene) samples, and observe a marked increase in the Seebeck coefficient when the electrical conductivity is enhanced through molecular organization. This initiates the transition from a Fermi glass to a semi-metal. The high Seebeck value, the metallic conductivity at room temperature and the absence of unpaired electron spins makes polymer semi-metals attractive for thermoelectrics and spintronics.
|
|
