| 1. |
- Bradley, Jonathan P., et al.
(författare)
-
Probing intermolecular crystal packing in gamma-indomethacin by high-resolution 1H solid-state NMR spectroscopy
- 2011
-
Ingår i: Crystal Growth & Design. - : American Chemical Society (ACS). - 1528-7483 .- 1528-7505. ; 11:8, s. 3463-3471
-
Tidskriftsartikel (refereegranskat)abstract
- An NMR crystallography approach that combines experimental solid-state magic-angle-spinning (MAS) NMR with calculation is applied to the gamma polymorph of the pharmaceutical molecule, indomethacin. First-principles calculations (GIPAW) for the full crystal structure and an isolated molecule show changes in the (1)H chemical shift for specific aliphatic and aromatic protons of over -1 ppm that are due to intermolecular CH-pi interactions. For the OH proton, (1)H double-quantum (DQ) CRAMPS (combined rotation and multiple-pulse spectroscopy) spectra reveal intermolecular H-H proximities to the OH proton of the carboxylic acid dimer as well as to specific aromatic CH protons. The enhanced resolution in (1)H DQ-(13)C spectra, recorded at 850 MHz, enables separate (1)H DQ build-up curves (as a function of the DQ recoupling time) to be extracted for the aromatic CH protons. Supported by eight-spin density-matrix simulations, it is shown how the relative maximum intensities and rates of build-up provide quantitative insight into intramolecular and intermolecular H-H proximities that characterize the crystal packing
|
|
| 2. |
- Dudenko, D.V., et al.
(författare)
-
Exploiting the synergy of powder x-ray diffraction and solid-state NMR spectroscopy in structure determination of organic molecular solids
- 2013
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 117:23, s. 12258-12265
-
Tidskriftsartikel (refereegranskat)abstract
- We report a strategy for structure determination of organic materials in which complete solid-state nuclear magnetic resonance (NMR) spectral data is utilized within the context of structure determination from powder X-ray diffraction (XRD) data. Following determination of the crystal structure from powder XRD data, first-principles density functional theory-based techniques within the GIPAW approach are exploited to calculate the solid-state NMR data for the structure, followed by careful scrutiny of the agreement with experimental solid-state NMR data. The successful application of this approach is demonstrated by structure determination of the 1:1 cocrystal of indomethacin and nicotinamide. The 1H and 13C chemical shifts calculated for the crystal structure determined from the powder XRD data are in excellent agreement with those measured experimentally, notably including the two-dimensional correlation of 1H and 13C chemical shifts for directly bonded 13C-1H moieties. The key feature of this combined approach is that the quality of the structure determined is assessed both against experimental powder XRD data and against experimental solid-state NMR data, thus providing a very robust validation of the veracity of the structure
|
|
| 3. |
- Ahmed, Hamzah, et al.
(författare)
-
Relationship between mechanical properties and crystal structure in cocrystals and salt of paracetamol
- 2017
-
Ingår i: Drug Development and Industrial Pharmacy. - : Taylor & Francis. - 0363-9045 .- 1520-5762. ; 43:1, s. 89-97
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives were to study mechanical properties of various solid forms of paracetamol and relate to their crystal structures. Paracetamol Form I (PRA), its cocrystals with oxalic acid (PRA-OXA) and 4,4-bipyridine (PRA-BPY) and hydrochloride salt (PRA-HCL) were selected. Cocrystals and salt were scaled-up using rational crystallization methods. The resulting materials were subjected to differential scanning solid-state characterization. The powders were sieved and 90-360 µm sieve fraction was considered. These powders were examined by scanning electron microscopy (SEM) and densities were determined. Tablets were made at applied pressures of 35-180 MPa under controlled conditions and the tablet height, diameter and hardness were measured. Tensile strength and porosity of the tablets were estimated using well known models. Crystal structures of these systems were visualized and slips planed were identified. Cocrystal and salt of PRA were physically pure. Sieved powders had comparable morphologies and particle size. The apparent and theoretical densities of powders were similar but no clear trends were observed. The tensile strengths of these compacts were increased with increasing pressure whereas tabletability decreased in the order oxalic acid > PRA-HCL ≈ PRA-OXA > BPY > PRA-BPY. Tablet tensile strength decreases exponentially with increasing porosity with the exception of PRY-BPY and BPY. Slip plane prediction based on attachment energies may not be independently considered. However, it was possible to explain the improved mechanical properties of powders based on the crystal structure. Cocrystallization and salt formation have introduced structural features that are responsible for improved tableting properties of PRA.
|
|
| 4. |
- Alhalaweh, Amjad, et al.
(författare)
-
Pharmaceutical cocrystals of nitrofurantoin: screening, characterization and crystal structure analysis
- 2012
-
Ingår i: CrystEngComm. - : Royal Society of Chemistry (RSC). - 1466-8033. ; 14:15, s. 5078-5088
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of this study was to screen and prepare cocrystals of the poorly soluble drug nitrofurantoin (NTF) with the aim of increasing its solubility. Screening for cocrystals of NTF using 47 coformers was performed by high-throughput (HT) screening using liquid assisted grinding (LAG) methods. Raman spectroscopy and powder X-ray diffraction (PXRD) were used as the primary analytical tools to identify the new crystalline solid forms. Manual LAG and reaction crystallization (RC) experiments were carried out to confirm and scale-up the hits. Seven hits were confirmed to be cocrystals. The cocrystals were characterized by PXRD, Raman and IR spectroscopy, thermal analysis (DSC and TGA) and liquid-state NMR or elemental analysis. The solution stability of the scaled-up cocrystals in water was tested by slurrying the cocrystals at 25 °C for one week. NTF forms cocrystals with a 1:1 stoichiometric ratio with urea (1), 4-hydroxybenzoic acid (2), nicotinamide (3), citric acid (4), l-proline (5) and vanillic acid (6). In addition, NTF forms a 1:2 cocrystal with vanillin (7). All but one of the NTF cocrystals transformed (dissociated) in water, resulting in NTF hydrate crystalline material or NTF hydrate plus the coformer, which indicates that the transforming cocrystals have a higher solubility than the NTF hydrate under these conditions. The crystal structures of 1:1 NTF-citric acid (4) and 1:2 NTF-vanillin (7) were solved by single-crystal X-ray diffraction. The crystal structures of these two cocrystals were analyzed in terms of their supramolecular synthons.
|
|
| 5. |
- Alhalaweh, Amjad, et al.
(författare)
-
Surface thermodynamics of mucoadhesive dry powder formulation of zolmitriptan
- 2011
-
Ingår i: AAPS PharmSciTech. - : Springer Science and Business Media LLC. - 1530-9932. ; 12:4, s. 1186-1192
-
Tidskriftsartikel (refereegranskat)abstract
- Microparticle powders for nasal delivery were formulated to contain the model drug, zolmitriptan, and varying proportions of different polymers. The objective of the study was to investigate the effects of these formulative parameters on the surface chemistry of the spray-dried microparticles and their potential for adhesion to the tested substrates, porcine mucin, and nasal tissue. The polymers used were chitosans of varying ionization states and molecular weights and hydroxypropyl methyl cellulose. The surface energies of the surfaces of the microparticles were determined using contact angle measurements and the van Oss model. The theory of surface thermodynamics was applied to determine the theoretical potential for the different materials to adhere to the substrates. It was found that the drug or polymers alone, as well as the various formulations, were more likely to adhere to mucin than to nasal tissue. Further, there was a trend for higher molecular weight chitosans to adhere better to the substrates than lower molecular weight chitosans. Similarly, adhesion was improved for formulations with a higher content of polymers. These theoretical predictions may be compared with further experimental results and be of use in making informed decisions on the choice of formulations for future expensive bio-studies.
|
|
| 6. |
- AlHayali, Amani
(författare)
-
In vitro-solubility and supersaturation behavior of supersaturating drug delivery systems
- 2018
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The development of new pharmaceutical products has been challenged by the growing number of poorly water-soluble drugs, which often lead to suboptimal bioavailability. Various approaches, such as the use of amor-phous solid dispersions and cocrystals, have been used to improve the solu-bility, and subsequent bioavailability, of these drug molecules. Supersaturat-ing drug delivery systems (SDDSs) have potential for achieving adequate oral drug bioavailability by increasing the drug solubility and creating a su-persaturated state in the gastrointestinal tract. However, there is a need for better understanding of the supersaturation behavior in SDDSs and of the factors affecting supersaturation. The main objective of this thesis was to improve understanding of the supersaturation solubility behavior in SDDSs with a particular focus on rapidly dissolving solid forms (amorphous forms/cocrystals).In the course of the work, a new formulation for ezetimibe using an amorphous solid dispersion was prepared, cocrystals of tadalafil were pre-pared, and oral films of silodosin were formulated for the first time. These new formulations were thoroughly characterized using a number of solid-state and pharmaceutical characterization techniques.The dissolution and supersaturation behavior of the prepared SDDSs were studied. The effects of various factors on the supersaturation and precipita-tion characteristics were investigated. These factors included the preparation method, the temperature of the dissolution medium, the type of dissolution biorelevant medium (gastric/intestinal) used, the permeability of the relevant gastrointestinal membranes, the addition of polymers, and the addition of surfactants. The amorphous solid dispersions, cocrystals and oral films that were prepared represent new drug formulations that provide significantly higher dissolution rates and supersaturated solubility than crystalline drug forms. Solid dispersions prepared by the melting method had better super-saturation properties than those prepared by spray drying. The precipitation kinetics of the solid dispersion were faster at 37 ̊C than at 25 ̊C in bio-relevant media. Implementation of an absorption tool during in vitro evalua-tion of supersaturation levels could improve the prediction accuracy of su-persaturation and precipitation. A better understanding of the effects of ex-cipients on the supersaturation and precipitation behavior of these types of formulation was obtained in this thesis. The improvement in supersaturation solubility obtained by adding polymers and surfactants was not proportional to the amounts of excipient used.This thesis has made notable contributions to the field of pharmaceutical science by advancing our understanding of the supersaturation solubility behavior of the newly prepared SDDSs.
|
|
| 7. |
- Ali, Hassan Refat H., et al.
(författare)
-
Solid-state vibrational spectroscopic investigation of cocrystals and salt of indomethacin
- 2012
-
Ingår i: CrystEngComm. - 1466-8033. ; 14:20, s. 6665-6674
-
Tidskriftsartikel (refereegranskat)abstract
- Knowledge and control of the solid forms of active pharmaceutical ingredients are important aspects of drug development in the pharmaceutical industry. In this paper, the process of the molecular self-assembly of saccharin cocrystals and the 2-amino-5-methylpyridine salt of indomethacin, in terms of the hydrogen bonding patterns, has been studied in the solid-state using vibrational spectroscopy (Raman and infrared). Interaction patterns in the respective crystalline states were obtained from the single crystal data. The effects of cocrystal and salt formation on the frequencies of the vibrational modes of motion were explained by vibrational spectroscopy and supported by quantum chemical calculations at the density functional theory level, leading to unambiguous assignment of the vibrational spectra of the starting materials and their respective products. Both Raman and infrared spectroscopies were useful, reliable tools for characterizing and distinguishing the indomethacin cocrystals and salt.
|
|
| 8. |
- Cho, Wonkyung, et al.
(författare)
-
Design of salmon calcitonin particles for nasal delivery using spray-drying and novel supercritical fluid-assisted spray-drying processes
- 2015
-
Ingår i: International Journal of Pharmaceutics. - : Elsevier BV. - 0378-5173 .- 1873-3476. ; 478:1, s. 288-296
-
Tidskriftsartikel (refereegranskat)abstract
- The overall aim of this study was to prepare a nasal powder formulation of salmon calcitonin (sCT) using an absorption enhancer to improve its bioavailability. In this work, powder formulations for nasal delivery of sCT were studied using various absorption enhancers and stabilizers. Powders were prepared by two different methods: conventional spray-drying (SD) and novel supercritical fluid-assisted spray-drying (SASD) to investigate the role of CO2 in the particle formation process. The prepared sCT powder formulations were characterized by several analyses; powder X-ray diffractometry (PXRD), scanning electron microscopy (SEM), and the Fourier transform infrared (FT-IR) spectroscopy method. The particle size distribution was also evaluated. In vivo absorption tests were carried out in Sprague-Dawley rat using the prepared powder formulations, and the results were compared to those of raw sCT. Quantitative analysis by high-performance liquid chromatography (HPLC) indicated that sCT was chemically stable after both the SD and SASD processes. Results of PXRD, SEM, and FT-IR did not indicate a strong interaction or defragmentation of sCT. The in vivo absorption test showed that SD- and SASD-processed sCT powders increased the bioavailability of the drug when compared to the nasal administration of raw sCT. In addition, SASD-processed sCT exhibited higher nasal absorption when compared with SD-processed sCT in all formulations due to a reduction of particle size. The results from this study illustrate that the preparation of nasal powders using the SASD process could be a promising approach to improve nasal absorption of sCT.
|
|
| 9. |
- Kaialy, Waseem, et al.
(författare)
-
Effect of carrier particle shape on dry powder inhaler performance
- 2011
-
Ingår i: International Journal of Pharmaceutics. - : Elsevier BV. - 0378-5173 .- 1873-3476. ; 421:1, s. 12-23
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study was to characterise the aerosolisation properties of salbutamol sulphate (SS) from dry powder inhaler (DPI) formulations containing different carrier products. The difference in the elongation ratio (ER) of the different carriers was highlighted. Different set of carriers, namely commercial mannitol (CM), commercial lactose (CL), cooling crystallised mannitol (CCM), acetone crystallised mannitol (ACM) and ethanol crystallised mannitol (ECM) were used and inspected in terms of size, shape, density, crystal form, flowability, and in vitro aerosolisation performance using Multi Stage Liquid Impinger (MSLI) and Aerolizer® inhaler device. Solid-state and morphological characterization showed that CM product was in pure β-form having particles with smaller ER (CM: ER = 1.62 ± 0.04) whereas ACM and ECM mannitol particles were in pure α form with higher ER (ACM: ER = 4.83 ± 0.18, ECM: ER = 5.89 ± 0.19). CCM product crystallised as mixtures of β-form and δ-form and showed the largest variability in terms of particle shape, size, and DPI performance. Linear relationships were established showing that carrier products with higher ER have smaller bulk density (Db), smaller tap density (Dt), higher porosity (P), and poorer flow properties. In vitro aerosolisation assessments showed that the higher the ER of the carrier particles the greater the amounts of SS delivered to lower airway regions indicating enhanced DPI performance. Yet, DPI performance enhancement by increasing carrier ER reached a “limit” as increasing carrier ER from 4.83 ± 0.18 (ACM) to 5.89 ± 0.19 (ECM) did not significantly alter fine particle fraction (FPF) of SS. Also, carrier particles with higher ER were disadvantageous in terms of higher amounts of SS remained in inhaler device (drug loss) and deposited on throat. Linear relationship was established (r2 = 0.87) showing that the higher the carrier ER the lower the drug emission (EM) upon inhalation. Moreover, poorer flowability for carrier products with higher ER is disadvantageous in terms of DPI formulation dose metering and processing on handling scale. In conclusion, despite that using carrier particles with higher ER can considerably increase the amounts of drug delivered to lower airway regions; this enhancement is restricted to certain point. Also, other limitations should be taken into account including higher drug loss and poorer flowability.
|
|
| 10. |
- Lou, Benyong, et al.
(författare)
-
1-Ethyl-6-fluoro-7-(4-formylpiperazin-1-yl)-4-oxo-1,4-dihydroquinoline-3-carboxylic acid
- 2007
-
Ingår i: Acta Crystallographica Section E. - : International Union of Crystallography. - 1600-5368. ; 63:11, s. o4281-
-
Tidskriftsartikel (refereegranskat)abstract
- The formylation reaction of norfloxacin with N,N-dimethylformamide (DMF) gives the title compound, C17H18FN3O4. In the structure, molecules are connected via weak C-HO, C-H and - interactions [perpendicular distance 3.423 Å and centroid-centroid distance 3.8141 Å].
|
|
