1. |
- Morales, J. C., et al.
(författare)
-
A giant exoplanet orbiting a very-low-mass star challenges planet formation models
- 2019
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 365:6460, s. 1441-1445
-
Tidskriftsartikel (refereegranskat)abstract
- Surveys have shown that super-Earth and Neptune-mass exoplanets are more frequent than gas giants around low-mass stars, as predicted by the core accretion theory of planet formation. We report the discovery of a giant planet around the very-low-mass star GJ 3512, as determined by optical and near-infrared radial-velocity observations. The planet has a minimum mass of 0.46 Jupiter masses, very high for such a small host star, and an eccentric 204-day orbit. Dynamical models show that the high eccentricity is most likely due to planet-planet interactions. We use simulations to demonstrate that the GJ 3512 planetary system challenges generally accepted formation theories, and that it puts constraints on the planet accretion and migration rates. Disk instabilities may be more efficient in forming planets than previously thought.
|
|
2. |
- Tinetti, G., et al.
(författare)
-
A chemical survey of exoplanets with ARIEL
- 2018
-
Ingår i: Experimental Astronomy. - : Springer Science and Business Media LLC. - 0922-6435 .- 1572-9508. ; 46:1, s. 135-209
-
Tidskriftsartikel (refereegranskat)abstract
- Thousands of exoplanets have now been discovered with a huge range of masses, sizes and orbits: from rocky Earth-like planets to large gas giants grazing the surface of their host star. However, the essential nature of these exoplanets remains largely mysterious: there is no known, discernible pattern linking the presence, size, or orbital parameters of a planet to the nature of its parent star. We have little idea whether the chemistry of a planet is linked to its formation environment, or whether the type of host star drives the physics and chemistry of the planet’s birth, and evolution. ARIEL was conceived to observe a large number (~1000) of transiting planets for statistical understanding, including gas giants, Neptunes, super-Earths and Earth-size planets around a range of host star types using transit spectroscopy in the 1.25–7.8 μm spectral range and multiple narrow-band photometry in the optical. ARIEL will focus on warm and hot planets to take advantage of their well-mixed atmospheres which should show minimal condensation and sequestration of high-Z materials compared to their colder Solar System siblings. Said warm and hot atmospheres are expected to be more representative of the planetary bulk composition. Observations of these warm/hot exoplanets, and in particular of their elemental composition (especially C, O, N, S, Si), will allow the understanding of the early stages of planetary and atmospheric formation during the nebular phase and the following few million years. ARIEL will thus provide a representative picture of the chemical nature of the exoplanets and relate this directly to the type and chemical environment of the host star. ARIEL is designed as a dedicated survey mission for combined-light spectroscopy, capable of observing a large and well-defined planet sample within its 4-year mission lifetime. Transit, eclipse and phase-curve spectroscopy methods, whereby the signal from the star and planet are differentiated using knowledge of the planetary ephemerides, allow us to measure atmospheric signals from the planet at levels of 10–100 part per million (ppm) relative to the star and, given the bright nature of targets, also allows more sophisticated techniques, such as eclipse mapping, to give a deeper insight into the nature of the atmosphere. These types of observations require a stable payload and satellite platform with broad, instantaneous wavelength coverage to detect many molecular species, probe the thermal structure, identify clouds and monitor the stellar activity. The wavelength range proposed covers all the expected major atmospheric gases from e.g. H2O, CO2, CH4 NH3, HCN, H2S through to the more exotic metallic compounds, such as TiO, VO, and condensed species. Simulations of ARIEL performance in conducting exoplanet surveys have been performed – using conservative estimates of mission performance and a full model of all significant noise sources in the measurement – using a list of potential ARIEL targets that incorporates the latest available exoplanet statistics. The conclusion at the end of the Phase A study, is that ARIEL – in line with the stated mission objectives – will be able to observe about 1000 exoplanets depending on the details of the adopted survey strategy, thus confirming the feasibility of the main science objectives.
|
|
3. |
|
|
4. |
- Vilardell, Anna M., et al.
(författare)
-
Dense nanostructured calcium phosphate coating on titanium by cold spray
- 2017
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier. - 0955-2219 .- 1873-619X. ; 37:4, s. 1747-1755
-
Tidskriftsartikel (refereegranskat)abstract
- This article deals with the understanding of building-up mechanisms of bioactive nanocrystalline hydroxyapatite coatings by Cold Spray, revealing very promising results in contrast to more conventional techniques such as Plasma Spray. A full characterization of feedstock and coatings is provided. The agglomerated structure of the powder proved to be suitable to obtain successfully thick hydroxyapatite coatings. A crystallite size below similar to 20 nm in the powder and the as-sprayed coatings is calculated by the Rietveld X-ray refinement method and agreed by Transmission Electron Microscopy. Some wipe tests were carried out on Ti6Al4V substrates in order to study the deposition of single particles and the nanoscale features were evaluated. The resulting structure indicates that there is no delimitation of particle boundaries and the overall coating has been formed by effective compaction of the original nanocrystallites, leading to consistent and consolidated layers. (C) 2016 Elsevier Ltd. All rights reserved.
|
|
5. |
- Vilardell, A. M., et al.
(författare)
-
Influence of surface topography on fatigue behavior of Ti6Al4V alloy by laser powder bed fusion
- 2018
-
Ingår i: Procedia CIRP. - : Elsevier. ; , s. 49-52
-
Konferensbidrag (refereegranskat)abstract
- This article deals with the understanding of the influence of surface topography on fatigue behavior of Ti6Al4V alloy specimens produced by laser powder bed fusion (LPBF). The same laser parameters and scan strategy were used for all specimens, giving a sample density higher than 99.5 %. Two different surface topographies were obtained by using the top and side surfaces of the specimens. The surface topography and morphology were investigated by optical surface profilometry and focus variation microscopy. Four-point bending fatigue test was performed on specimens with top and side surfaces as the highest stressed surface respectively. Machined specimens were used as reference. The features of the fracture surface, such as crack initiation and propagation, were analyzed by focus variation and scanning electron microscopy (SEM). Both, fatigue results and fracture surface investigations, were correlated and discussed in relation to surface topography and microstructure, as well as manufacturing parameters.
|
|
6. |
- Vilardell, Anna M., et al.
(författare)
-
Surface integrity factors influencing fatigue crack nucleation of laser powder bed fusion Ti6Al4V alloy
- 2020
-
Ingår i: Procedia CIRP. - : Elsevier. - 2212-8271. ; , s. 222-226
-
Konferensbidrag (refereegranskat)abstract
- The quality of the surface influences remarkably the fatigue life of additive manufactured components. This work proposes to study the influence of surface integrity on the bending fatigue life of Ti6Al4V manufactured by laser powder bed fusion. Rectangular specimens were manufactured horizontally and the last printed layer had laser track scanning directions (α=30°,60°,90°) in relation to the specimen length. The top surface 3D-roughness average was similar for all the specimens. The specimens were studied under as-built and heat-treated conditions. A correlation between laser track scanning direction, 2D-roughness parameters, and fatigue life for as-built specimens was found. The as-built specimens with 90° and 30° direction showed the shortest and the longest fatigue life, respectively. Heat-treated specimens showed a shorter fatigue life independently of the surface roughness. This could be explained by other surface integrity factors influencing fatigue performance of the material, such as the presence of subsurface porosity and surface oxygen enrichment. © 2020 The Authors. Published by Elsevier B.V.
|
|