| 1. |
- Asimakopoulou, Eleni Myrto, et al.
(författare)
-
Development towards high-resolution kHz-speed rotation-free volumetric imaging
- 2024
-
Ingår i: Optics Express. - 1094-4087. ; 32:3, s. 4413-4426
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray multi-projection imaging (XMPI) has the potential to provide rotation-free 3D movies of optically opaque samples. The absence of rotation enables superior imaging speed and preserves fragile sample dynamics by avoiding the centrifugal forces introduced by conventional rotary tomography. Here, we present our XMPI observations at the ID19 beamline (ESRF, France) of 3D dynamics in melted aluminum with 1000 frames per second and 8 µm resolution per projection using the full dynamical range of our detectors. Since XMPI is a method under development, we also provide different tests for the instrumentation of up to 3000 frames per second. As the high-brilliance of 4th generation light-sources becomes more available, XMPI is a promising technique for current and future X-ray imaging instruments.
|
|
| 2. |
|
|
| 3. |
- Bellucci, Valerio, et al.
(författare)
-
Hard X-ray stereographic microscopy for single-shot differential phase imaging
- 2023
-
Ingår i: Optics Express. - 1094-4087. ; 31:11, s. 18399-18406
-
Tidskriftsartikel (refereegranskat)abstract
- The characterisation of fast phenomena at the microscopic scale is required for the understanding of catastrophic responses of materials to loads and shocks, the processing of materials by optical or mechanical means, the processes involved in many key technologies such as additive manufacturing and microfluidics, and the mixing of fuels in combustion. Such processes are usually stochastic in nature and occur within the opaque interior volumes of materials or samples, with complex dynamics that evolve in all three dimensions at speeds exceeding many meters per second. There is therefore a need for the ability to record three-dimensional X-ray movies of irreversible processes with resolutions of micrometers and frame rates of microseconds. Here we demonstrate a method to achieve this by recording a stereo phase-contrast image pair in a single exposure. The two images are combined computationally to reconstruct a 3D model of the object. The method is extendable to more than two simultaneous views. When combined with megahertz pulse trains of X-ray free-electron lasers (XFELs) it will be possible to create movies able to resolve 3D trajectories with velocities of kilometers per second.
|
|
| 4. |
- Birnsteinova, Sarlota, et al.
(författare)
-
Online dynamic flat-field correction for MHz microscopy data at European XFEL
- 2023
-
Ingår i: Journal of Synchrotron Radiation. - 1600-5775. ; 30:6, s. 1030-1037
-
Tidskriftsartikel (refereegranskat)abstract
- The high pulse intensity and repetition rate of the European X-ray Free-Electron Laser (EuXFEL) provide superior temporal resolution compared with other X-ray sources. In combination with MHz X-ray microscopy techniques, it offers a unique opportunity to achieve superior contrast and spatial resolution in applications demanding high temporal resolution. In both live visualization and offline data analysis for microscopy experiments, baseline normalization is essential for further processing steps such as phase retrieval and modal decomposition. In addition, access to normalized projections during data acquisition can play an important role in decision-making and improve the quality of the data. However, the stochastic nature of X-ray free-electron laser sources hinders the use of standard flat-field normalization methods during MHz X-ray microscopy experiments. Here, an online (i.e. near real-time) dynamic flat-field correction method based on principal component analysis of dynamically evolving flat-field images is presented. The method is used for the normalization of individual X-ray projections and has been implemented as a near real-time analysis tool at the Single Particles, Clusters, and Biomolecules and Serial Femtosecond Crystallography (SPB/SFX) instrument of EuXFEL.
|
|
| 5. |
- Buakor, Khachiwan, et al.
(författare)
-
Shot-to-shot flat-field correction at X-ray free-electron lasers
- 2022
-
Ingår i: Optics Express. - 1094-4087. ; 30:7, s. 10633-10644
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray free-electron lasers (XFELs) provide high-brilliance pulses, which offer unique opportunities for coherent X-ray imaging techniques, such as in-line holography. One of the fundamental steps to process in-line holographic data is flat-field correction, which mitigates imaging artifacts and, in turn, enables phase reconstructions. However, conventional flat-field correction approaches cannot correct single XFEL pulses due to the stochastic nature of the self-amplified spontaneous emission (SASE), the mechanism responsible for the high brilliance of XFELs. Here, we demonstrate on simulated and megahertz imaging data, measured at the European XFEL, the possibility of overcoming such a limitation by using two different methods based on principal component analysis and deep learning. These methods retrieve flat-field corrected images from individual frames by separating the sample and flat-field signal contributions; thus, enabling advanced phase-retrieval reconstructions. We anticipate that the proposed methods can be implemented in a real-time processing pipeline, which will enable online data analysis and phase reconstructions of coherent full-field imaging techniques such as in-line holography at XFELs.
|
|
| 6. |
- Guo, Rui, et al.
(författare)
-
Deep-learning image enhancement and fibre segmentation from time-resolved computed tomography of fibre-reinforced composites
- 2023
-
Ingår i: Composites Science and Technology. - 0266-3538. ; 244
-
Tidskriftsartikel (refereegranskat)abstract
- Monitoring the microstructure and damage development of fibre-reinforced composites during loading is crucial to understanding their mechanical properties. Time-resolved X-ray computed tomography enables such an in-situ, non-destructive study. However, the photon flux and fibre-matrix contrast limit its achievable spatial and temporal resolution. In this paper, we push the limits of temporal and spatial resolution for the microstructural analysis of unidirectional continuous carbon fibre-reinforced epoxy composites by establishing a new pipeline based on CycleGAN for unsupervised super-resolution and denoising and U-Net-id for individual fibre segmentation. After illustrating the benefits of a 3D CycleGAN over a 2D one, we show that data enhanced by this pipeline can yield similar segmentation quality to that of a slow-acquisition, high-quality scan that took up to 200 times longer to acquire. This pipeline, therefore, enables more robust data extraction from fast time-resolved X-ray tomography, removing a critical stumbling block for this technique.
|
|
| 7. |
- Kalbfleisch, Sebastian, et al.
(författare)
-
X-ray in-line holography and holotomography at the NanoMAX beamline
- 2022
-
Ingår i: Journal of Synchrotron Radiation. - : International Union of Crystallography (IUCr). - 0909-0495 .- 1600-5775. ; 29, s. 224-229
-
Tidskriftsartikel (refereegranskat)abstract
- Coherent X-ray imaging techniques, such as in-line holography, exploit the high brilliance provided by diffraction-limited storage rings to perform imaging sensitive to the electron density through contrast due to the phase shift, rather than conventional attenuation contrast. Thus, coherent X-ray imaging techniques enable high-sensitivity and low-dose imaging, especially for low-atomic-number (Z) chemical elements and materials with similar attenuation contrast. Here, the first implementation of in-line holography at the NanoMAX beamline is presented, which benefits from the exceptional focusing capabilities and the high brilliance provided by MAX IV, the first operational diffractionlimited storage ring up to approximately 300 eV. It is demonstrated that in-line holography at NanoMAX can provide 2D diffraction-limited images, where the achievable resolution is only limited by the 70 nm focal spot at 13 keV X-ray energy. Also, the 3D capabilities of this instrument are demonstrated by performing holotomography on a chalk sample at a mesoscale resolution of around 155 nm. It is foreseen that in-line holography will broaden the spectra of capabilities of MAX IV by providing fast 2D and 3D electron density images from mesoscale down to nanoscale resolution.
|
|
| 8. |
- Knoška, Juraj, et al.
(författare)
-
Ultracompact 3D microfluidics for time-resolved structural biology
- 2020
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- To advance microfluidic integration, we present the use of two-photon additive manufacturing to fold 2D channel layouts into compact free-form 3D fluidic circuits with nanometer precision. We demonstrate this technique by tailoring microfluidic nozzles and mixers for time-resolved structural biology at X-ray free-electron lasers (XFELs). We achieve submicron jets with speeds exceeding 160 m s−1, which allows for the use of megahertz XFEL repetition rates. By integrating an additional orifice, we implement a low consumption flow-focusing nozzle, which is validated by solving a hemoglobin structure. Also, aberration-free in operando X-ray microtomography is introduced to study efficient equivolumetric millisecond mixing in channels with 3D features integrated into the nozzle. Such devices can be printed in minutes by locally adjusting print resolution during fabrication. This technology has the potential to permit ultracompact devices and performance improvements through 3D flow optimization in all fields of microfluidic engineering.
|
|
| 9. |
- Langer, Max, et al.
(författare)
-
PyPhase - A Python package for X-ray phase imaging
- 2021
-
Ingår i: Journal of Synchrotron Radiation. - 0909-0495. ; 28, s. 1261-1266
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray propagation-based imaging techniques are well established at synchrotron radiation and laboratory sources. However, most reconstruction algorithms for such image modalities, also known as phase-retrieval algorithms, have been developed specifically for one instrument by and for experts, making the development and diffusion of such techniques difficult. Here, PyPhase, a free and open-source package for propagation-based near-field phase reconstructions, which is distributed under the CeCILL license, is presented. PyPhase implements some of the most popular phase-retrieval algorithms in a highly modular framework supporting its deployment on large-scale computing facilities. This makes the integration, the development of new phase-retrieval algorithms, and the deployment on different computing infrastructures straightforward. Its capabilities and simplicity are presented by application to data acquired at the synchrotron source MAX IV (Lund, Sweden).
|
|
| 10. |
- Li, Tang, et al.
(författare)
-
Dose-efficient scanning Compton X-ray microscopy
- 2023
-
Ingår i: Light: Science and Applications. - 2095-5545. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- The highest resolution of images of soft matter and biological materials is ultimately limited by modification of the structure, induced by the necessarily high energy of short-wavelength radiation. Imaging the inelastically scattered X-rays at a photon energy of 60 keV (0.02 nm wavelength) offers greater signal per energy transferred to the sample than coherent-scattering techniques such as phase-contrast microscopy and projection holography. We present images of dried, unstained, and unfixed biological objects obtained by scanning Compton X-ray microscopy, at a resolution of about 70 nm. This microscope was realised using novel wedged multilayer Laue lenses that were fabricated to sub-ångström precision, a new wavefront measurement scheme for hard X rays, and efficient pixel-array detectors. The doses required to form these images were as little as 0.02% of the tolerable dose and 0.05% of that needed for phase-contrast imaging at similar resolution using 17 keV photon energy. The images obtained provide a quantitative map of the projected mass density in the sample, as confirmed by imaging a silicon wedge. Based on these results, we find that it should be possible to obtain radiation damage-free images of biological samples at a resolution below 10 nm.
|
|
