| 1. |
- Abelev, Betty, et al.
(författare)
-
Measurement of prompt J/psi and beauty hadron production cross sections at mid-rapidity in pp collisions at root s=7 TeV
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :11
-
Tidskriftsartikel (refereegranskat)abstract
- The ALICE experiment at the LHC has studied J/psi production at mid-rapidity in pp collisions at root s = 7 TeV through its electron pair decay on a data sample corresponding to an integrated luminosity L-int = 5.6 nb(-1). The fraction of J/psi from the decay of long-lived beauty hadrons was determined for J/psi candidates with transverse momentum p(t) > 1,3 GeV/c and rapidity vertical bar y vertical bar < 0.9. The cross section for prompt J/psi mesons, i.e. directly produced J/psi and prompt decays of heavier charmonium states such as the psi(2S) and chi(c) resonances, is sigma(prompt J/psi) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 8.3 +/- 0.8(stat.) +/- 1.1 (syst.)(-1.4)(+1.5) (syst. pol.) mu b. The cross section for the production of b-hadrons decaying to J/psi with p(t) > 1.3 GeV/c and vertical bar y vertical bar < 0.9 is a sigma(J/psi <- hB) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 1.46 +/- 0.38 (stat.)(-0.32)(+0.26) (syst.) mu b. The results are compared to QCD model predictions. The shape of the p(t) and y distributions of b-quarks predicted by perturbative QCD model calculations are used to extrapolate the measured cross section to derive the b (b) over bar pair total cross section and d sigma/dy at mid-rapidity.
|
|
| 2. |
- Abelev, Betty, et al.
(författare)
-
Underlying Event measurements in pp collisions at root s=0.9 and 7 TeV with the ALICE experiment at the LHC
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :7
-
Tidskriftsartikel (refereegranskat)abstract
- We present measurements of Underlying Event observables in pp collisions at root s = 0 : 9 and 7 TeV. The analysis is performed as a function of the highest charged-particle transverse momentum p(T),L-T in the event. Different regions are defined with respect to the azimuthal direction of the leading (highest transverse momentum) track: Toward, Transverse and Away. The Toward and Away regions collect the fragmentation products of the hardest partonic interaction. The Transverse region is expected to be most sensitive to the Underlying Event activity. The study is performed with charged particles above three different p(T) thresholds: 0.15, 0.5 and 1.0 GeV/c. In the Transverse region we observe an increase in the multiplicity of a factor 2-3 between the lower and higher collision energies, depending on the track p(T) threshold considered. Data are compared to PYTHIA 6.4, PYTHIA 8.1 and PHOJET. On average, all models considered underestimate the multiplicity and summed p(T) in the Transverse region by about 10-30%.
|
|
| 3. |
- Ahmad, Y., et al.
(författare)
-
NMR and NEXAFS Study of Various Graphite Fluorides
- 2013
-
Ingår i: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 117:26, s. 13564-13572
-
Tidskriftsartikel (refereegranskat)abstract
- Graphite fluorides with different structural types (CyF)(n) (y = 2.5, 2, and 1) and room temperature graphite fluorides were studied by solid state,NMR and NEXAFS. Data extracted from those two techniques are complementary, providing information about the C-F bonding and the hybridization character of the carbon atom valence states. The comparison of data obtained by different methods such as NMR, Raman, and X-ray absorption leads to similar conclusions regarding the chemical bonding in fluorographites. Several major configurations of fluorinated graphites are discussed, that is, planar sheets with mainly sp(2) hybridization in room temperature graphite fluorides and corrugated sheets with sp(3) hybridization in covalent high temperature graphite fluoride. Different references such as highly oriented pyrolytic graphite (HOPG), graphitized carbon nanodiscs (graph-CNDs) and nanodiamonds (NDs) have also been investigated for comparison.
|
|
| 4. |
- Preobrajenski, Alexei B., et al.
(författare)
-
Honeycomb Boron on Al(111) : From the Concept of Borophene to the Two-Dimensional Boride
- 2021
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 15:9, s. 15153-15165
-
Tidskriftsartikel (refereegranskat)abstract
- A great variety of two-dimensional (2D) boron allotropes (borophenes) were extensively studied in the past decade in the quest for graphene-like materials with potential for advanced technological applications. Among them, the 2D honeycomb boron is of specific interest as a structural analogue of graphene. Recently it has been synthesized on the Al(111) substrate; however it remains unknown to what extent does honeycomb boron behave like graphene. Here we elucidate the structural and electronic properties of this unusual 2D material with a combination of core-level X-ray spectroscopies, scanning tunneling microscopy, and DFT calculations. We demonstrate that in contrast to graphene on lattice-mismatched metal surfaces, honeycomb boron cannot wiggle like a blanket on Al(111), but rather induces reconstruction of the top metal layer, forming a stoichiometric AlB2 sheet on top of Al. Our conclusions from theoretical modeling are fully supported by X-ray absorption spectra showing strong similarity in the electronic structure of honeycomb boron on Al(111) and thick AlB2 films. On the other hand, a clear separation of the electronic states of the honeycomb boron into π- and σ-subsystems indicates an essentially 2D nature of the electronic system in both one-layer AlB2 and bulk AlB2.
|
|
| 5. |
|
|
| 6. |
- Simonov, K. A., et al.
(författare)
-
Controllable oxidation of h-BN monolayer on Ir(111) studied by core-level spectroscopies
- 2012
-
Ingår i: Surface Science. - : Elsevier BV. - 0039-6028 .- 1879-2758. ; 606:3-4, s. 564-570
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of atomic oxygen adsorption on the structure and electronic properties of monolayer hexagonal boron nitride (h-BN) grown on Ir(111) has been studied using near edge X-ray absorption fine structure spectroscopy (NEXAFS), photoelectron spectroscopy (PES), and low-energy electron diffraction (LEED). It has been shown that the oxidation of the h-BN monolayer occurs through a gradual substitution of N by O in the h-BN lattice. This process leads to the formation of defect sites corresponding to three different types of the B atom environment (BN3-xOx with x=1,2,3). The oxidation of the h-BN monolayer is very different from the case of graphene on Ir(111), where adsorption of atomic oxygen results mainly in the formation of epoxy groups [J. Phys. Chem. C. 115, 9568 (2011)]. A post-annealing of the h-BN monolayer after oxygen exposure results in further destruction of the B N bonds and formation of a B2O3-like structure. (C) 2011 Elsevier B.V. All rights reserved.
|
|
| 7. |
- Simonov, Konstantin A., et al.
(författare)
-
Effect of Electron Injection in Copper-Contacted Graphene Nanoribbons
- 2016
-
Ingår i: Nano Reseach. - : Springer Science and Business Media LLC. - 1998-0124 .- 1998-0000. ; 9:9, s. 2735-2746
-
Tidskriftsartikel (refereegranskat)abstract
- For practical electronic device applications of graphene nanoribbons (GNRs), it is essential to have abrupt and well-defined contacts between the ribbon and the adjacent metal lead. By analogy with graphene, these contacts can induce electron or hole doping, which may significantly affect the I/V characteristics of the device. Cu is among the most popular metals of choice for contact materials. In this study, we investigate the effect of in situ intercalation of Cu on the electronic structure of atomically precise, spatially aligned armchair GNRs of width N = 7 (7-AGNRs) fabricated via a bottom-up method on the Au(788) surface. Scanning tunneling microscopy data reveal that the complete intercalation of about one monolayer of Cu under 7-AGNRs can be facilitated by gentle annealing of the sample at 80 A degrees C. Angle-resolved photoemission spectroscopy (ARPES) data clearly reflect the one-dimensional character of the 7-AGNR band dispersion before and after intercalation. Moreover, ARPES and core-level photoemission results show that intercalation of Cu leads to significant electron injection into the nanoribbons, which causes a pronounced downshift of the valence and conduction bands of the GNR with respect to the Fermi energy (Delta E similar to 0.5 eV). As demonstrated by ARPES and X-ray absorption spectroscopy measurements, the effect of Cu intercalation is restricted to n-doping only, without considerable modification of the band structure of the GNRs. Post-annealing of the 7-AGNRs/Cu/Au(788) system at 200 A degrees C activates the diffusion of Cu into Au and the formation of a Cu-rich surface Au layer. Alloying of intercalated Cu leads to the recovery of the initial position of GNR-related bands with respect to the Fermi energy (E (F)), thus, proving the tunability of the induced n-doping.
|
|
| 8. |
- Simonov, Konstantin A., et al.
(författare)
-
From Graphene Nanoribbons on Cu(111) to Nanographene on Cu(110) : Critical Role of Substrate Structure in the Bottom-Up Fabrication Strategy
- 2015
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 9:9, s. 8997-9011
-
Tidskriftsartikel (refereegranskat)abstract
- Bottom-up strategies can be effectively implemented for the fabrication of atomically precise graphene nanoribbons. Recently, using 10,10'-dibromo-9,9'-bianthracene (DBBA) as a molecular precursor to grow armchair nanoribbons on Au(111) and Cu(111), we have shown that substrate activity considerably affects the dynamics of ribbon formation, nonetheless without significant modifications in the growth mechanism. In this paper we compare the on-surface reaction pathways for DBBA molecules on Cu(111) and Cu(110). Evolution of both systems has been studied via a combination of core-level X-ray spectroscopies, scanning tunneling microscopy, and theoretical calculations. Experimental and theoretical results reveal a significant increase in reactivity for the open and anisotropic Cu(110) surface in comparison with the close-packed Cu(111). This increased reactivity results in a predominance of the molecular substrate interaction over the intermolecular one, which has a critical impact on the transformations of DBBA on Cu(110). Unlike DBBA on Cu(111), the Ullmann coupling cannot be realized for DBBA/Cu(110) and the growth of nanoribbons via this mechanism is blocked. Instead, annealing of DBBA on Cu(110) at 250 degrees C results in the formation of a new structure: quasi-zero-dimensional flat nanographenes. Each nanographene unit has dehydrogenated zigzag edges bonded to the underlying Cu rows and oriented with the hydrogen-terminated armchair edge parallel to the [1-10] direction. Strong bonding of nanographene to the substrate manifests itself in a high adsorption energy of -12.7 eV and significant charge transfer of 3.46e from the copper surface. Nanographene units coordinated with bromine adatoms are able to arrange in highly regular arrays potentially suitable for nanotemplating.
|
|
| 9. |
- Simonov, Konstantin, 1988-, et al.
(författare)
-
Effect of Substrate Chemistry on the Bottom-Up Fabrication of Graphene Nanoribbons : Combined Core-Level Spectroscopy and STM Study
- 2014
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 118:23, s. 12532-12540
-
Tidskriftsartikel (refereegranskat)abstract
- Atomically precise graphene nanoribbons (GNRs) can be fabricated via thermally induced polymerization of halogen containing molecular precursors on metal surfaces. In this paper the effect of substrate reactivity on the growth and structure of armchair GNRs (AGNRs) grown on inert Au(111) and active Cu(111) surfaces has been systematically studied by a combination of core-level X-ray spectroscopies and scanning tunneling microscopy. It is demonstrated that the activation threshold for the dehalogenation process decreases with increasing catalytic activity of the substrate. At room temperature the 10,10'-dibromo-9,9'-bianthracene (DBBA) precursor molecules on Au(111) remain intact, while on Cu(111) a complete surface-assisted dehalogenation takes place. Dehalogenation of precursor molecules on Au(111) only starts at around 80 degrees C and completes at 200 degrees C, leading to the formation of linear polymer chains. On Cu(111) tilted polymer chains appear readily at room temperature or slightly elevated temperatures. Annealing of the DBBA/Cu(111) above 100 degrees C leads to intramolecular cyclodehydrogenation and formation of flat AGNRs at 200 degrees C, while on the Au(111) surface the formation of GNRs takes place only at around 400 degrees C. In STM, nanoribbons have significantly reduced apparent height on Cu(111) as compared to Au(111), 70 +/- 11 pm versus 172 +/- 14 pm, independently of the bias voltage. Moreover, an alignment of GNRs along low-index crystallographic directions of the substrate is evident for Cu(111), while on Au(111) it is more random. Elevating the Cu(111) substrate temperature above 400 degrees C results in a dehydrogenation and subsequent decomposition of GNRs; at 750 degrees C the dehydrogenated carbon species self-organize in graphene islands. In general, our data provide evidence for a significant influence of substrate reactivity on the growth dynamics of GNRs.
|
|
| 10. |
- Svirskiy, Gleb I., et al.
(författare)
-
Electronic structure of the [Ni(Salen)] complex studied by core-level spectroscopies
- 2021
-
Ingår i: Physical Chemistry Chemical Physics. - : Royal Society of Chemistry (RSC). - 1463-9076 .- 1463-9084. ; 23:18, s. 11015-11027
-
Tidskriftsartikel (refereegranskat)abstract
- The nature and structure of occupied and empty valence electronic states (molecular orbitals, MOs) of the [Ni(Salen)] molecular complex (NiO2N2C16H14) have been studied by X-ray photoemission and absorption spectroscopy combined with density functional theory (DFT) calculations. As a result, the composition of the high-lying occupied and low-lying unoccupied electronic states has been identified. In particular, the highest occupied molecular orbital (HOMO) of the complex is found to be predominantly located on the phenyl rings of the salen ligand, while the states associated with the occupied Ni 3d-derived molecular orbitals (MOs) are at higher binding energies. The lowest unoccupied molecular orbital (LUMO) is also located on the salen ligand and is formed by the 2pπ orbitals of carbon atoms in phenyl groups of the salen macrocycle. The unoccupied MOs above the LUMO reflect σ- and π-bonding between Ni and its nearest neighbours. All valence states have highly mixed character. The specific nature of the unoccupied Ni 3d-derived σ-MO is a consequence of donor-acceptor chemical bonding in [Ni(Salen)]. This journal is
|
|
