| 1. |
|
|
| 2. |
- Sekretareva, Alina, et al.
(författare)
-
Total phenol analysis of water using a laccase-based microsensor array
- 2015
-
Ingår i: Program of the XXIII International Symposium on Bioelectrochemistry and Bioenergetics of the Bioelectrochemical Society. 14-18 June, 2015. Malmö, Sweden. - Lausanne : Bioelectrochemical Society. ; , s. 155-155
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- The monitoring of phenolic compounds in raw waters and wastewaters is of great importance for environmental control. Use of biosensors for rapid, specific and simple detection of phenolic compounds is a promising approach. A number of biosensors have been developed for phenol detection. A general drawback of previously reported biosensors is their insufficient detection limits for phenols in water samples. One way to improve the detection limit is by the use of microelectrodes.Microband design of the microelectrodes combines convergent mass transport due to the microscale width and high output currents due to the macroscopic length. Among the various techniques available for microband electrode fabrication, we have chosen screen-printing which is a cost-effective production method.In this study, we report on the development of a laccase-based microscale biosensor operating under a convergent diffusion regime. Screen-printing followed by simple cutting was utilized for the fabrication of graphite microbands as a platform for further covalent immobilization of laccase. Numerical simulations, utilizing the finite element method with periodic boundary conditions, were used for modeling the voltammetric response of the developed microband electrodes. Anodization followed by covalent immobilization was used for the electrode modification with laccase. Direct and mediated laccase bioelectrocatalytic oxidation of phenols was studied on macro- and microscale graphite electrodes. Significant enhancement of the analytical performance was achieved by the establishment of convergent diffusion in the microscale sensor. Finally, the developed microsensor was utilized to monitor phenolic compounds in real waste water.
|
|
| 3. |
- Sekretaryova, Alina, et al.
(författare)
-
Total phenol analysis of weakly supported water using a laccase-based microband biosensor.
- 2016
-
Ingår i: Analytica Chimica Acta. - : Elsevier. - 0003-2670 .- 1873-4324. ; 907, s. 45-53
-
Tidskriftsartikel (refereegranskat)abstract
- The monitoring of phenolic compounds in wastewaters in a simple manner is of great importance for environmental control. Here, a novel screen printed laccase-based microband array for in situ, total phenol estimation in wastewaters and for water quality monitoring without additional sample pre-treatment is presented. Numerical simulations using the finite element method were utilized for the characterization of micro-scale graphite electrodes. Anodization followed by covalent modification was used for the electrode functionalization with laccase. The functionalization efficiency and the electrochemical performance in direct and catechol-mediated oxygen reduction were studied at the microband laccase electrodes and compared with macro-scale electrode structures. The reduction of the dimensions of the enzyme biosensor, when used under optimized conditions, led to a significant improvement in its analytical characteristics. The elaborated microsensor showed fast responses towards catechol additions to tap water – a weakly supported medium – characterized by a linear range from 0.2 to 10 μM, a sensitivity of 1.35 ± 0.4 A M−1 cm−2 and a dynamic range up to 43 μM. This enhanced laccase-based microsensor was used for water quality monitoring and its performance for total phenol analysis of wastewater samples from different stages of the cleaning process was compared to a standard method.
|
|
| 4. |
- Stavrinidou, Eleni, et al.
(författare)
-
In vivo polymerization and manufacturing of wires and supercapacitors in plants
- 2017
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 114:11, s. 2807-2812
-
Tidskriftsartikel (refereegranskat)abstract
- Electronic plants, e-Plants, are an organic bioelectronic platform that allows electronic interfacing with plants. Recently we have demonstrated plants with augmented electronic functionality. Using the vascular system and organs of a plant, we manufactured organic electronic devices and circuits in vivo, leveraging the internal structure and physiology of the plant as the template, and an integral part of the devices. However, this electronic functionality was only achieved in localized regions, whereas new electronic materials that could be distributed to every part of the plant would provide versatility in device and circuit fabrication and create possibilities for new device concepts. Here we report the synthesis of such a conjugated oligomer that can be distributed and form longer oligomers and polymer in every part of the xylem vascular tissue of a Rosa floribunda cutting, forming long-range conducting wires. The plant’s structure acts as a physical template, whereas the plant’s biochemical response mechanism acts as the catalyst for polymerization. In addition, the oligomer can cross through the veins and enter the apoplastic space in the leaves. Finally, using the plant’s natural architecture we manufacture supercapacitors along the stem. Our results are preludes to autonomous energy systems integrated within plants and distribute interconnected sensor-actuator systems for plant control and optimization
|
|
| 5. |
- Volkov, Anton V., et al.
(författare)
-
Asymmetric Aqueous Supercapacitor Based on p- and n-Type Conducting Polymers
- 2019
-
Ingår i: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 2:8, s. 5350-5355
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrated an asymmetric aqueous supercapacitor made of p- and n-type conducting polymer electrodes. We used the high electron affinity (EA) n-type polymer poly(benzimidazobenzophenanthroline) (BBL) as the anode conducting material, and the low ionization potential (IP) p-type polar polythiophene p(g(4)2T-T) as the cathode material. EA(BBL) matches IPp(g42T-T), enabling the fabrication of all-organic asymmetric p/n-supercapacitors that function in aqueous electrolytes. The devices operate in a voltage window up to 1 V, yielding areal capacitances of 90 mF cm(-2) and specific capacitances of 33 F g(-1) as well as excellent cycling stability with almost 100% capacitance retention over 10 000 cycles.
|
|
