| 1. |
|
|
| 2. |
- Liu, Lin, et al.
(författare)
-
Research progress in the application of MXene in bacterial detection and eradication
- 2024
-
Ingår i: Materials Today Physics. - 2542-5293. ; 43
-
Forskningsöversikt (refereegranskat)abstract
- Infections stemming from pathogenic bacteria pose a notable menace to public health. Traditional strategies for bacterial detection and management frequently confront hurdles such as sensitivity constraints and antibiotic resistance. This review embarks on an exploration of the synthesis techniques and inherent structural traits of MXenes. An array of fabrication approaches spanning both top-down and bottom-up paradigms is meticulously examined. Subsequently, attention shifts to the formulation of bacterial detection sensors. Electrochemical, fluorescent, and dual-modal sensors are critically examined, elucidating how MXenes elevate the precision and sensitivity of bacterial detection. Notably, the potential for MXenes to identify chiral molecules is underscored. The segment dedicated to antibacterial mechanisms and applications dissects MXenes' effectiveness in eradicating bacterial agents. Mechanisms encompassing physical harm, photothermally-driven sterilization, and reactive oxygen species -induced sterilization are expounded upon. Additionally, the practical utilization of MXene-based nanomaterials in water purification and antibacterial interventions is succinctly outlined. Prospects on the horizon are evaluated, spotlighting the persistent trajectory of research and development in this dynamic sphere. Ultimately, at its essence, this comprehensive review offers a panoramic perspective of the substantial advancements achieved in MXene-based research for bacterial identification and eradication.
|
|
| 3. |
- D'Ovidio, Francesco, et al.
(författare)
-
Frontiers in fine-scale in situ studies: Opportunities during the SWOT fast sampling phase
- 2019
-
Ingår i: Frontiers in Marine Science. - : Frontiers Media SA. - 2296-7745. ; 6
-
Forskningsöversikt (refereegranskat)abstract
- © 2019 Frontiers Media S. A. Conceived as a major new tool for climate studies, the Surface Water and Ocean Topography (SWOT) satellite mission will launch in late 2021 and will retrieve the dynamics of the oceans upper layer at an unprecedented resolution of a few kilometers. During the calibration and validation (CalVal) phase in 2022, the satellite will be in a 1- day-repeat fast sampling orbit with enhanced temporal resolution, sacrificing the spatial coverage. This is an ideal opportunity - unique for many years to come - to coordinate in situ experiments during the same period for a focused study of fine scale dynamics and their broader roles in the Earth system. Key questions to be addressed include the role of fine scales on the ocean energy budget, the connection between their surface and internal dynamics, their impact on plankton diversity, and their biophysical dynamics at the ice margin.
|
|
| 4. |
- Li, Wang, et al.
(författare)
-
Correlation of microstructure and dynamic softening mechanism of UNS S32101 duplex stainless steel during elevated temperature tensile testing
- 2022
-
Ingår i: Materials Science & Engineering. - : Elsevier BV. - 0921-5093 .- 1873-4936. ; 855
-
Tidskriftsartikel (refereegranskat)abstract
- The dynamic substructural development and softening mechanism of UNS S32101 duplex stainless steel were comprehensively investigated by employing hot-tensile tests at various strain rates of 0.1-10 s(-1) at a fixed temperature of 1200 degrees C. Different flow behaviors were attributed to the microstructural evolution and restoration process under various hot-deformation conditions. The alternative restoration mechanisms of ferrite in the current alloy were closely associated with the evolution of the misorientation angle in the (sub)grains, depending on the applied strain rates. Therein, three distinct softening mechanisms were found in ferrite, i) subgrain coalescence (SC) at 0.1 s(-1), ii) continuous dynamic recrystallization (CDRX) at 1 s(-1) and iii) subgrain rotationassisted discontinuous dynamic recrystallization (SR-assisted DDRX) at 10 s(-1). During SR-assisted DDRX process, new DRX nuclei were preferentially formed at the high-angle grain boundaries/phase boundaries (HAGBs/PBs) through the growth of highly misoriented subgrains. In contrast to ferrite, the available dynamic softening behavior of austenite, unlike the classical DDRX mechanism characterized by strain-induced boundary migration (SIBM), is affected by a limited number of pre-existing HAGBs. At lower strain rates of 0.1 and 1 s(-1), the nucleation process of DRX in austenite is analogous to the CDRX behavior, whereas the growth characteristics conform to DDRX, thus, it can be called dynamic recovery-assisted DDRX (DRV-assisted DDRX). At a high strain rate of 10 s(-1), DRX nucleation mainly took place through the strain-induced twin boundaries (TBs) transformation into HAGBs, and then rapidly grew via SIBM, referred to as TB-assisted DDRX.
|
|
| 5. |
- Li, Wang, et al.
(författare)
-
New comprehension on the microstructure, texture and deformation behaviors of UNS S32101 duplex stainless steel fabricated by direct cold rolling process
- 2022
-
Ingår i: Materials Science & Engineering. - : Elsevier BV. - 0921-5093 .- 1873-4936. ; 845, s. 143150-
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of cold deformation on the detailed microstructure evolution, texture development and deformation behaviors/mechanisms of UNS S32101 duplex stainless steel (DSS2101) during the direct cold rolling process was investigated. The results showed that throughout the cold deformation process, the negative texture of {001}<110> component was nonexistent in deformed ferrite, and most texture components were mainly concentrated on alpha/gamma-fibers. Detwinning in austenite was substantial responsible for the reorientation in {111}< 112> towards {111}<110> of gamma-fiber in ferrite rather than martensite transformation. Austenite texture were composed of {110}<100> Goss and {110}<115> Goss/Brass components at heavy deformation (50% and 70%). The refinement and deformation behavior in ferrite was attributed to microbands (MBs) subdivision and dislocation activities, whilst that of austenite mainly occurred through twinning, strain induced detwinning (SID) and strain induced martensite (SIM).
|
|
| 6. |
- Li, Wang, et al.
(författare)
-
Partitioning behavior of N and its effect on hot deformation behavior of duplex stainless steels 2101 and 2205
- 2022
-
Ingår i: Journal of Materials Science. - : Springer. - 0022-2461 .- 1573-4803. ; 57:48, s. 22119-22139
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, the N back-migration and restoration behavior of duplex stainless steels (DSSs) 2101 and 2205 (DSS2205) were studied. Experimental findings indicated that the Cr2N in the ferrite (α) persistently decreased for both steels during the cooling process from 1200 °C to 1000 °C, and the disappearance rate of Cr2N in DSS2205 was significantly faster than that of lean duplex stainless steel 2101 (LDX2101). On the one hand, due to the severe partitioning behavior of N atoms in α migrating back to austenite (γ), on the other hand, the enriched Mn in LDX2101 and the enriched Ni in DSS2205 exerted an impact on N migration. Also, the cumulative thermal deformation at 1200 °C contributed to the N migration back into γ with the assistance of high-density dislocations and thermal deformation energy. Furthermore, the softening mechanism of constituent phases was dominated by discontinuous dynamic recrystallization (DDRX) mechanism in both steels at a strain rate of 10 s−1, which was characterized by strain-induced boundaries migration from low-density dislocations to high ones.
|
|
| 7. |
- Liu, Ximeng, et al.
(författare)
-
Privacy and Security Issues in Deep Learning: A Survey
- 2021
-
Ingår i: IEEE Access. - : IEEE. - 2169-3536. ; 9, s. 4566-4593
-
Tidskriftsartikel (refereegranskat)abstract
- Deep Learning (DL) algorithms based on artificial neural networks have achieved remarkable success and are being extensively applied in a variety of application domains, ranging from image classification, automatic driving, natural language processing to medical diagnosis, credit risk assessment, intrusion detection. However, the privacy and security issues of DL have been revealed that the DL model can be stolen or reverse engineered, sensitive training data can be inferred, even a recognizable face image of the victim can be recovered. Besides, the recent works have found that the DL model is vulnerable to adversarial examples perturbed by imperceptible noised, which can lead the DL model to predict wrongly with high confidence. In this paper, we first briefly introduces the four types of attacks and privacy-preserving techniques in DL. We then review and summarize the attack and defense methods associated with DL privacy and security in recent years. To demonstrate that security threats really exist in the real world, we also reviewed the adversarial attacks under the physical condition. Finally, we discuss current challenges and open problems regarding privacy and security issues in DL.
|
|
| 8. |
- Ma, Zhaoying, et al.
(författare)
-
Mineralogical and magnetic variations of periglacial loess in SE Tibet reveal mid-Pleistocene expansion of Tibetan glacial activity
- 2024
-
Ingår i: Quaternary Science Reviews. - : Elsevier. - 0277-3791 .- 1873-457X. ; 330
-
Tidskriftsartikel (refereegranskat)abstract
- The formation and evolution of the cryosphere on the Tibetan Plateau is of great significance in understanding the Earth's carbon and climatic system. Periglacial loess deposits in southeastern Tibet offer a means to constrain this history as they contain critical information on glacial grinding and frost shattering processes in high-altitude mountain regions through time, which yield lithogenic fractions of largely loess silts and sands. Based on combined analyses of lithogenic magnetic properties and mineralogical composition, here we find that increasing high mountain production and supply of fresh detrital components since the mid-Pleistocene climate transition (MPT, 1.2–0.7 Ma) led to a substantial increase of the lithogenic susceptibility and decrease in chemical weathering intensity of periglacial loess in southeastern Tibet. The agreement of these findings with similar results from eolian loess on the northern margins of the Tibetan Plateau suggests a plateau-wide glacier expansion during the MPT. Enhanced glacial erosion and freeze-thaw activities occurred in the high-altitude mountain regions of the plateau during the MPT, thereby providing vast amounts of fresh detritus for the formation of loess deposits. High and constant values of lithogenic magnetic parameters in the loess deposits after 0.7–0.6 Ma further indicate that the Middle Pleistocene is a critical period for the establishment of modern-like glacial and periglacial landforms on the Tibetan Plateau. Our results further suggest that enhanced Quaternary glaciation in SE Tibet occurred earlier than in the north, which we attribute to climate cooling combined with regional seasonal snowline lowering. As such, a close relationship exists between global climate changes, development of pan-Tibetan glaciations, and large-scale dust emission.
|
|
| 9. |
- Qu, Yanhua, 1974-, et al.
(författare)
-
Ground tit genome reveals avian adaptation to living at high altitudes in the Tibetan plateau.
- 2013
-
Ingår i: Nature communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 4, s. 2071-
-
Tidskriftsartikel (refereegranskat)abstract
- The ground tit (Parus humilis) is endemic to the Tibetan plateau. It is a member of family Paridae but it was long thought to be related to the ground jays because of their morphological similarities. Here we present the ground tit's genome and re-sequence two tits and one ground jay, to clarify this controversially taxonomic status and uncover its genetic adaptations to the Tibetan plateau. Our results show that ground tit groups with two tits and it diverges from them between 7.7 and 9.9 Mya. Compared with other avian genomes, ground tit shows expansion in genes linked to energy metabolism and contractions in genes involved in immune and olfactory perception. We also found positively selected and rapidly evolving genes in hypoxia response and skeletal development. These results indicated that ground tit evolves basic strategies and 'tit-to-jay' change for coping with the life in an extreme environment.
|
|
| 10. |
- van Sebille, Erik, et al.
(författare)
-
Lagrangian ocean analysis : Fundamentals and practices
- 2018
-
Ingår i: Ocean Modelling. - : Elsevier BV. - 1463-5003 .- 1463-5011. ; 121, s. 49-75
-
Forskningsöversikt (refereegranskat)abstract
- Lagrangian analysis is a powerful way to analyse the output of ocean circulation models and other ocean velocity data such as from altimetry. In the Lagrangian approach, large sets of virtual particles are integrated within the three-dimensional, time-evolving velocity fields. Over several decades, a variety of tools and methods for this purpose have emerged. Here, we review the state of the art in the field of Lagrangian analysis of ocean velocity data, starting from a fundamental kinematic framework and with a focus on large-scale open ocean applications. Beyond the use of explicit velocity fields, we consider the influence of unresolved physics and dynamics on particle trajectories. We comprehensively list and discuss the tools currently available for tracking virtual particles. We then showcase some of the innovative applications of trajectory data, and conclude with some open questions and an outlook. The overall goal of this review paper is to reconcile some of the different techniques and methods in Lagrangian ocean analysis, while recognising the rich diversity of codes that have and continue to emerge, and the challenges of the coming age of petascale computing.
|
|
