| 1. |
- Bogdal, Christian, et al.
(författare)
-
Emissions of polybrominated diphenyl ethers (PBDEs) in Zurich, Switzerland, determined by a combination of measurements and modeling
- 2014
-
Ingår i: Chemosphere. - : Elsevier BV. - 0045-6535 .- 1879-1298. ; 116, s. 15-23
-
Tidskriftsartikel (refereegranskat)abstract
- Polybrominated diphenyl ethers (PBDEs) have been widely used as flame retardants but they are of concern and are currently being phased-out because of their environmentally hazardous properties and their potential to cause adverse health effects. We analyzed PBDEs in Zurich, Switzerland, and applied a multimedia environmental fate model to back-calculate the rate of PBDE emission to air. PBDE concentrations in ambient air were measured in summer 2010 and winter 2011 in the city center of Zurich. Concentrations were higher in summer (sum PBDEs 118-591 pg m(-3)) than in winter (sum PBDEs 17-151 pg m(-3)), and are on the upper end of concentrations reported in literature for urban sites with no point sources of PBDEs. The emissions derived from our measurements (summer: 53-165 mu g capita(-1) d(-1), winter: 25-112 mu g capita(-1) d(-1)) and extrapolated to annual emissions for Switzerland (114-406 kg a(-1)) lie in the middle of ranges reported on the basis of substance flow analyses and emission inventories. The difference between summer and winter emissions is small compared to the difference that would be expected from the temperature dependence of PBDE vapor pressure, which would be consistent with emissions occurring to a large extent from flame-proofed materials located indoors under nearly constant temperature conditions and/or emissions to air occurring by suspension of particles containing PBDEs. Compared to previous studies in Switzerland, concentrations and emissions of PBDEs appear to have increased during the last five years with an increasing contribution of decabromodiphenyl ether, despite the addition of PBDEs to national and international regulations.
|
|
| 2. |
- Bogdal, Christian, et al.
(författare)
-
Emissions of Polychlorinated Biphenyls, Polychlorinated Dibenzo-p-dioxins, and Polychlorinated Dibenzofurans during 2010 and 2011 in Zurich, Switzerland
- 2014
-
Ingår i: Environmental Science and Technology. - : American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 48:1, s. 482-490
-
Tidskriftsartikel (refereegranskat)abstract
- Persistent organic pollutants (POPs) are ubiquitous contaminants of environmental and human health relevance, but their emissions into the environment are still poorly known. In this study, concentrations of selected POPs were measured in ambient air in Zurich, Switzerland, and interpreted with a multimedia mass balance model. The aim of the combination of measurements and modeling was to back-calculate atmospheric emission rates of POPs. Measurements were performed in summer 2010 and winter 2011 and target analytes included polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Estimated emissions were higher in summer than in winter. Emission estimates for Zurich can be extrapolated to annual averages for Switzerland of 312 kg·a–1 (39 mg·capita–1·a–1), 53 kg·a–1 (7 mg·capita–1·a–1), and 3 kg·a–1 (0.4 mg·capita–1·a–1, 94 g WHO98-TEQ·a–1, 65 g I-TEQ·a–1) for the six indicator PCBs (iPCBs), the twelve coplanar dioxin-like PCBs (dlPCBs), and the 17 2,3,7,8-chlorosubstituted PCDD/Fs, respectively. The emission rates of iPCBs are in agreement with existing emission inventories, whereas for PCDD/Fs the emissions are five times higher than the estimates from the Swiss national emission inventory. Emissions of dlPCBs in Switzerland are presented here for the first time. Our study also provides the first seasonally resolved emission rates of POPs, which were determined with our combined measurement and modeling approach. These findings highlight the relevance of ongoing sources of POPs, even decades after regulations aiming to reduce or eliminate sources were established.
|
|
| 3. |
- Boucher, Justin M., et al.
(författare)
-
Toward a Comprehensive Global Emission Inventory of C-4-C-10 Perfluoroalkanesulfonic Acids (PFSAs) and Related Precursors : Focus on the Life Cycle of C-6- and C-10-Based Products
- 2019
-
Ingår i: Environmental Science and Technology Letters. - : American Chemical Society (ACS). - 2328-8930. ; 6:1, s. 1-7
-
Tidskriftsartikel (refereegranskat)abstract
- A first global emission inventory of C-4-C-10 perfluoroalkanesulfonic acids (PFSAs) released during the life cycle of perfluorohexanesulfonyl fluoride (PHxSF)- and perfluorodecanesulfonyl fluoride (PDSF)-based products is presented. This study complements previous research on emissions of PFSAs that focused largely on the life cycle of perfluorooctanesulfonyl fluoride (POSF) and its derivatives. It reviews and integrates existing information about the life cycle of PHxSF, PDSF, and their derivatives; the limited data available in the public domain point to potentially significant global production, uses, and releases of these substances. Between 1958 and 2015, ranges of total emissions of perfluorohexanesulfonic acid (PFHxS) and perfluorodecanesulfonic acid (PFDS) are estimated to be 120-1022 and 38-378 metric tons, respectively. With the new emission estimates as inputs in a global multimedia environmental fate model (CliMoChem), the model-derived environmental concentrations well capture the reported field concentrations, providing strong support for the plausibility of the developed emission inventories. The results highlight the ongoing environmental exposure to these substances and the need for more detailed data in the public domain about their production levels and uses.
|
|
| 4. |
- Carney Almroth, Bethanie, et al.
(författare)
-
Understanding and addressing the planetary crisis of chemicals and plastics
- 2022
-
Ingår i: One Earth. - : Elsevier BV. - 2590-3330 .- 2590-3322. ; 5:10, s. 1070-1074
-
Tidskriftsartikel (refereegranskat)abstract
- Planetary functions are destabilized by the releases of large quantities and numbers of anthropogenic chemicals, which go beyond planetary boundaries and threaten the safe operating space for humanity. Here, we call for urgent action to mitigate these threats and identify opportunities for intervention along the impact pathway of anthropogenic chemicals, including plastics.
|
|
| 5. |
|
|
| 6. |
- Cousins, Ian T., et al.
(författare)
-
Finding essentiality feasible : common questions and misinterpretations concerning the "essential-use" concept
- 2021
-
Ingår i: Environmental Science. - : Royal Society of Chemistry (RSC). - 2050-7887 .- 2050-7895. ; 23:8, s. 1079-1087
-
Forskningsöversikt (refereegranskat)abstract
- The essential-use concept is a tool that can guide the phase-out of per- and polyfluoroalkyl substances (PFAS) and potentially other substances of concern. This concept is a novel approach to chemicals management that determines whether using substances of concern, such as PFAS, is truly essential for a given functionality. To assess the essentiality of a particular use case, three considerations need to be addressed: (1) the function (chemical, end use and service) that the chemical provides in the use case, (2) whether the function is necessary for health and safety and critical for the functioning of society and (3) if the function is necessary, whether there are viable alternatives for the chemical for this particular use. A few illustrative examples of the three-step process are provided for use cases of PFAS. The essential-use concept takes chemicals management away from a substance-by-substance approach to a group approach. For PFAS and other substances of concern, it offers a more rapid pathway toward effective management or phase-out. Parts of the concept of essential use have already been widely applied in global treaties and international regulations and it has also been recently used by product manufacturers and retailers to phase out substances of concern from supply chains. Herein some of the common questions and misinterpretations regarding the practical application of the essential-use concept are reviewed, and answers and further clarifications are provided.
|
|
| 7. |
- Cousins, Ian T., et al.
(författare)
-
Strategies for grouping per- and polyfluoroalkyl substances (PFAS) to protect human and environmental health
- 2020
-
Ingår i: Environmental Science. - : Royal Society of Chemistry (RSC). - 2050-7887 .- 2050-7895. ; 22:7, s. 1444-1460
-
Forskningsöversikt (refereegranskat)abstract
- Grouping strategies are needed for per- and polyfluoroalkyl substances (PFAS), in part, because it would be time and resource intensive to test and evaluate the more than 4700 PFAS on the global market on a chemical-by-chemical basis. In this paper we review various grouping strategies that could be used to inform actions on these chemicals and outline the motivations, advantages and disadvantages for each. Grouping strategies are subdivided into (1) those based on the intrinsic properties of the PFAS (e.g.persistence, bioaccumulation potential, toxicity, mobility, molecular size) and (2) those that inform risk assessment through estimation of cumulative exposure and/or effects. The most precautionary grouping approach of those reviewed within this article suggests phasing out PFAS based on their high persistence alone (the so-called P-sufficient approach). The least precautionary grouping approach reviewed advocates only grouping PFAS for risk assessment that have the same toxicological effects, modes and mechanisms of action, and elimination kinetics, which would need to be well documented across different PFAS. It is recognised that, given jurisdictional differences in chemical assessment philosophies and methodologies, no one strategy will be generally acceptable. The guiding question we apply to the reviewed grouping strategies is: grouping for what purpose? The motivation behind the grouping (e.g.determining use in productsvs.setting guideline levels for contaminated environments) may lead to different grouping decisions. This assessment provides the necessary context for grouping strategies such that they can be adopted as they are, or built on further, to protect human and environmental health from potential PFAS-related effects.
|
|
| 8. |
- Cousins, Ian T., et al.
(författare)
-
The concept of essential use for determining when uses of PFASs can be phased out
- 2019
-
Ingår i: Environmental Science. - : Royal Society of Chemistry (RSC). - 2050-7887 .- 2050-7895. ; 21:11, s. 1803-1815
-
Forskningsöversikt (refereegranskat)abstract
- Because of the extreme persistence of per- and polyfluoroalkyl substances (PFASs) and their associated risks, the Madrid Statement argues for stopping their use where they are deemed not essential or when safer alternatives exist. To determine when uses of PFASs have an essential function in modern society, and when they do not, is not an easy task. Here, we: (1) develop the concept of essential use based on an existing approach described in the Montreal Protocol, (2) apply the concept to various uses of PFASs to determine the feasibility of elimination or substitution of PFASs in each use category, and (3) outline the challenges for phasing out uses of PFASs in society. In brief, we developed three distinct categories to describe the different levels of essentiality of individual uses. A phase-out of many uses of PFASs can be implemented because they are not necessary for the betterment of society in terms of health and safety, or because functional alternatives are currently available that can be substituted into these products or applications. Some specific uses of PFASs would be considered essential because they provide for vital functions and are currently without established alternatives. However, this essentiality should not be considered as permanent; rather, constant efforts are needed to search for alternatives. We provide a description of several ongoing uses of PFASs and discuss whether these uses are essential or non-essential according to the three essentiality categories. It is not possible to describe each use case of PFASs in detail in this single article. For follow-up work, we suggest further refining the assessment of the use cases of PFASs covered here, where necessary, and expanding the application of this concept to all other uses of PFASs. The concept of essential use can also be applied in the management of other chemicals, or groups of chemicals, of concern.
|
|
| 9. |
- Cousins, Ian T., et al.
(författare)
-
The high persistence of PFAS is sufficient for their management as a chemical class
- 2020
-
Ingår i: Environmental Science. - : Royal Society of Chemistry (RSC). - 2050-7887 .- 2050-7895. ; 22:12, s. 2307-2312
-
Forskningsöversikt (refereegranskat)abstract
- Per- and polyfluoroalkyl substances (PFAS) are a class of synthetic organic substances with diverse structures, properties, uses, bioaccumulation potentials and toxicities. Despite this high diversity, all PFAS are alike in that they contain perfluoroalkyl moieties that are extremely resistant to environmental and metabolic degradation. The vast majority of PFAS are therefore either non-degradable or transform ultimately into stable terminal transformation products (which are still PFAS). Under the European chemicals regulation this classifies PFAS as very persistent substances (vP). We argue that this high persistence is sufficient concern for their management as a chemical class, and for all non-essential uses of PFAS to be phased out. The continual release of highly persistent PFAS will result in increasing concentrations and increasing probabilities of the occurrence of known and unknown effects. Once adverse effects are identified, the exposure and associated effects will not be easily reversible. Reversing PFAS contamination will be technically challenging, energy intensive, and costly for society, as is evident in the efforts to remove PFAS from contaminated land and drinking water sources.
|
|
| 10. |
- Cousins, Ian T., et al.
(författare)
-
The precautionary principle and chemicals management : The example of perfluoroalkyl acids in groundwater
- 2016
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 94, s. 331-340
-
Forskningsöversikt (refereegranskat)abstract
- Already in the late 1990s microgram-per-liter levels of perfluorooctane sulfonate (PFOS) were measured in water samples from areas where fire-fighting foams were used or spilled. Despite these early warnings, the problems of groundwater, and thus drinking water, contaminated with perfluoroalkyl and polyfluoroalkyl substances (PFASs) including PFOS are only beginning to be addressed. It is clear that this PFAS contamination is poorly reversible and that the societal costs of clean-up will be high. This inability to reverse exposure in a reasonable timeframe is a major motivation for application of the precautionary principle in chemicals management. We conclude that exposure can be poorly reversible; 1) due to slow elimination kinetics in organisms, or 2) due to poorly reversible environmental contamination that leads to continuous exposure. In the second case, which is relevant for contaminated groundwater, the reversibility of exposure is not related to the magnitude of a chemical's bioaccumulation potential. We argue therefore that all PFASs entering groundwater, irrespective of their perfluoroalkyl chain length and bioaccumulation potential, will result in poorly reversible exposures and risks as well as further clean-up costs for society. To protect groundwater resources for future generations, society should consider a precautionary approach to chemicals management and prevent the use and release of highly persistent and mobile chemicals such as PFASs. (C) 2016 Elsevier Ltd. All rights reserved.
|
|
