| 1. |
- Ayob, Mohd Nasir, et al.
(författare)
-
A remotely controlled sea level compensation system for wave energy converters
- 2019
-
Ingår i: Energies. - : MDPI. - 1996-1073. ; 12:10
-
Tidskriftsartikel (refereegranskat)abstract
- The working principle of the wave energy converter (WEC) developed at Uppsala University (UU) is based on a heaving point absorber with a linear generator. The generator is placed on the seafloor and is connected via a steel wire to a buoy floating on the surface of the sea. The generator produces optimal power when the translator's oscillations are centered with respect to the stator. However, due to the tides or other changes in sea level, the translator's oscillations may shift towards the upper or lower limit of the generator's stroke length, resulting in a limited stroke and a consequent reduction in power production. A compensator has been designed and developed in order to keep the generator's translator centered, thus compensating for sea level variations. This paper presents experimental tests of the compensator in a lab environment. The wire adjustments are based on online sea level data obtained from the Swedish Meteorological and Hydrological Institute (SMHI). The objective of the study was to evaluate and optimize the control and communication system of the device. As the device will be self-powered with solar and wave energy, the paper also includes estimations of the power consumption and a control strategy to minimize the energy requirements of the whole system. The application of the device in a location with high tides, such as Wave Hub, was analyzed based on offline tidal data. The results show that the compensator can minimize the negative effects of sea level variations on the power production at the WEC. Although the wave energy concept of UU is used in this study, the developed system is also applicable to other WECs for which the line length between seabed and surface needs to be adjusted.
|
|
| 2. |
- Ayob, Mohd Nasir
(författare)
-
Adaptation of wave power plants to regions with high tides
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The wave energy converter (WEC) developed at Uppsala University is based on the concept of a heaving point absorber with a linear generator placed on the seafloor. The translator inside the generator oscillates in a linear fashion and is connected via a steel wire to a point absorbing buoy. The power production from this device is optimal when the translator’s oscillations are centered with respect to the stator. However, due to the tides, the mean translator position may shift towards the upper or lower limits of the generator’s stroke length, thereby affecting the power production. This effect will be severe if the WEC operates in an area characterized by a high tidal range. The translator may be stuck at the top or rest at the bottom of the generator for a considerable amount of time daily.One of the solutions to this problem is to develop a compensator that is able to adjust the length of the connecting line. With an estimated weight of 10 tonnes of the connecting line and the translator, the use of a pocket wheel wound with steel chain was deemed suitable. Not being connected to an external power supply, the device needs a alternative local power supply to charge batteries that run the system. A hybrid system of solar photovoltaics (PV) and a small WEC was proposed to power the device and, based on the simulations for two different sea states, the hybrid system was found suitable for powering the device all year round. The experimental work carried out in the lab environment has shown that the compensator was able to lift the estimated load of the translator and to position the chain so that it follows the variations in the sea level from meteorological websites.The second part of the thesis is a study on the wave energy potential in the Nordic synchronous grid. A model for the allocation of wave farms for four energy scenarios was developed, linearly weighted to the intensity of the wave energy flux. As an extension to this study, a net load variability study for a highly or a fully renewable Nordic power system was conducted. It involved four different intermittent renewable energy (IRE) sources: solar PV, wind, tidal power, and wave. The study shows that an optimal combination of IRE sources to replace fossil fuels and nuclear energy is possible from the perspective of net load variability.
|
|
| 3. |
|
|
| 4. |
- Ayob, Mohd Nasir, et al.
(författare)
-
Small-Scale Renewable Energy Converters for Battery Charging
- 2018
-
Ingår i: Journal of Marine Science and Engineering. - : MDPI. - 2077-1312. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents two wave energy concepts for small-scale electricity generation. In the presented case, these concepts are installed on the buoy of a heaving, point-absorbing wave energy converter (WEC) for large scale electricity production. In the studied WEC, developed by Uppsala University, small-scale electricity generation in the buoy is needed to power a tidal compensating system designed to increase the performance of the WEC in areas with high tides. The two considered and modeled concepts are an oscillating water column (OWC) and a heaving point absorber. The results indicate that the OWC is too small for the task and does not produce enough energy. On the other hand, the results show that a hybrid system composed of a small heaving point absorber combined with a solar energy system would be able to provide a requested minimum power of around 37.7W on average year around. The WEC and solar panel complement each other, as the WEC produces enough energy by itself during wintertime (but not in the summer), while the solar panel produces enough energy in the summer (but not in the winter).
|
|
| 5. |
- Ayob, Mohd Nasir, et al.
(författare)
-
Tidal Effect Compensation System Design for High Range Sea Level Variations
- 2015
-
Konferensbidrag (refereegranskat)abstract
- The working principle of the wave energy converter (WEC) from Uppsala University is a heaving point absorber with directly driven linear generator placed on the seabed. The heave motion of the buoy is transmitted to the generator via a steel cable. When tides occur, the sea level changes, and thus making the WEC works below optimal condition. This system is designed so that the WEC is able to work at sea level variation up to 8 meters. A compensation system is designed to continuously make the WEC work in its optimal condition even at different sea levels. We present a mechanical system and its control algorithm that monitor and control the length of the connecting line. The connecting line is consist of a steel wire and a steel chain connected together. The mechanical part of the system is the winch that retracts or releases the steel chain that connects the translator and the buoy at the water surface. The rotation of the winch is controlled by a motor with the help of microcontrollers and several sensors for accuracy and feedback. The result from simulation showed that the system works fine. The approach of compensating the wire length connecting the buoy and the translator allow more flexibility to WEC to work in the area with high sea level variation.
|
|
| 6. |
- Ayob, Mohd Nasir, et al.
(författare)
-
Wave energy potential and 1-50 TWh scenarios for the Nordic synchronous grid
- 2017
-
Ingår i: Renewable energy. - : Elsevier BV. - 0960-1481 .- 1879-0682. ; 101, s. 462-466
-
Tidskriftsartikel (refereegranskat)abstract
- This study estimates the wave energy potential along the coasts of the Nordic countries with the Nordicsynchronous grid as a chosen boundary. A model for wave farm allocation was developed and applied to achieve annual energy production targets of 1 TWh, 3 TWh, 10 TWh and 50 TWh. The study is based on 10 years of data, from 2005 to 2014, from the European Center for Medium-Range Weather Forecasts. Data from a total of 728 coordinate points along the Nordic countries, with a 0.125° x 0.125° spatial resolution, were considered. An algorithm was developed to generate the scenarios, to estimate the installed capacity of wave farms at different locations along the coasts, and to measure the physical space required by the farms. This analysis of the four energy target scenarios resulted in a required installed capacity of 337 MW, 1.02 GW, 3.42 GW and 17.09 GW, covering a stretch of the total coast of 0.4, 1.2, 3.8 and 18.9% respectively. The total annual wave energy resource for the Nordic countries is determined at 590 TWh, most of which is available along the Norwegian coast.
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Boström, Cecilia, et al.
(författare)
-
Design proposal of electrical system for linear generator wave power plants
- 2009
-
Ingår i: 35TH ANNUAL CONFERENCE OF IEEE INDUSTRIAL ELECTRONICS. - : IEEE. - 9781424446483 - 9781424446506 ; , s. 4180-4185
-
Konferensbidrag (refereegranskat)abstract
- This paper describes an electrical system layout for a wave power plant connecting linear generators to the grid. The electrical power out from the wave energy converters must be converted before they can be connected to the grid. The conversion is carried out in marine substations that will be placed on the seabed.The paper presents experimental power data from a wave energy converter that has been in operation at the Lysekil research site since March 2006. Moreover, results and analyses from experiments and simulations from tests with the generator connected to a rectifier and filter are presented. A simulation is made to show the difference between having the generator connected to a linear load and a nonlinear load, which would be the case when the generator is connected to the grid.
|
|
| 10. |
- Boström, Cecilia, et al.
(författare)
-
Experimental results from an offshore wave energy converter
- 2008
-
Ingår i: Volume 6. ; , s. 653-657
-
Konferensbidrag (refereegranskat)abstract
- Anoffshore wave energy converter (WEC) was successfully launched at theSwedish west coast in the middle of March 2006. TheWEC is based on a permanent magnet linear generator locatedon the ocean floor driven by a point absorber. Ameasuring station has been installed on a nearby island whereall measurements and experiments on the WEC have been carriedout. The output voltage from the generator fluctuates both inamplitude and frequency and must therefore be converted to enablegrid connection. In order to study the voltage conversion, themeasure station was fitted with a six pulse diode rectifierand a capacitive filter during the autumn of 2006. Theobject of this paper is to present a detailed descriptionof the existing wave energy system of the Islandsberg project.Special attention will be given to the power absorption bythe generator when it is connected to a non linearload
|
|
