| 1. |
- Alfredsson, Viveka, et al.
(författare)
-
In-situ studies of the formation mechanism of SBA-15
- 2005
-
Ingår i: Nanoporous Materials IV, 156. - 0444517480 ; 156, s. 69-74
-
Konferensbidrag (refereegranskat)abstract
- The formation process of SBA-15 has been investigated by time resolved TEM, in-situ SAXS/SAXD and in-situ NMR. The synthesis was done at 35 degrees in acidic solution with tetramethylorthosilicate as the silica source and Pluronic P123 as the structure directing amphiphile. The initially formed silica-polymer composite consists of flocs of spherical micelles in a silica matrix. The micelles then coalesce forming rods that eventually pack into the ordered array of which SBA-15 consists.
|
|
| 2. |
- Alfredsson, Viveka, et al.
(författare)
-
The Dynamic Association Processes Leading from a Silica Precursor to a Mesoporous SBA-15 Material.
- 2015
-
Ingår i: Accounts of Chemical Research. - : American Chemical Society (ACS). - 1520-4898 .- 0001-4842. ; 48:7, s. 1891-1900
-
Forskningsöversikt (refereegranskat)abstract
- During the last two decades, the synthesis of silica with an ordered mesoporous structure has been thoroughly explored. The basis of the synthesis is to let silica monomers polymerize in the presence of an amphiphilic template component. In the first studies, cationic surfactants were used as structure inducer. Later it was shown that pluronic copolymers also could have the role. One advantage with the pluronics copolymers is that they allow for a wider variation in the radius of pores in the resulting silica material. Another advantage lies in the higher stability resulting from the thicker walls between the pores. Mesoporous silica has a very high area to volume ratio, and the ordered structure ensures surface homogeneity. There are a number of applications of this type of material. It can be used as support for catalysts, as templates to produces other mesoporous inorganic materials, or in controlled release applications. The synthesis of mesoporous silica is, from a practical point of view, simple, but there are significant possibilities to vary synthesis conditions with a concomitant effect on the properties of the resulting material. It is clear that the structural properties on the nanometer scale are determined by the self-assembly properties of the amphiphile, and this knowledge has been used to optimize pore geometry and pore size. To have a practical functional material it is desirable to also control the structure on a micrometer scale and larger. In practice, one has largely taken an empirical approach in optimizing reaction conditions, paying less attention to underlying chemical and physicochemical mechanisms that lead from starting conditions to the final product. In this Account, we present our systematic studies of the processes involved not only in the formation of the mesoporous structure as such, but also of the formation of structures on the micrometer scale. The main point is to show how the ongoing silica polymerization triggers a sequence of structural changes through the action of colloidal interactions. Our approach is to use a multitude of experimental methods to characterize the time evolution of the same highly reproducible synthesis process. It is the silica polymerization reactions that set the time scale, and the block copolymer self-assembly responds to the progress of the polymerization through a basically hydrophobic interaction between silica and ethylene oxide units. The progression of the silica polymerization leads to an increased hydrophobicity triggering an aggregation process resulting in the formation of silica-copolymer composite particles of increasing size. The particle growth occurs in a stepwise way caused by intricate shifts between colloidal stability and instability. By tuning reaction conditions one can have an end product of hexagonal prism composite particles with single crystal 2D hexagonal order.
|
|
| 3. |
- Balogh, Joakim, et al.
(författare)
-
Effects of oil on the curvature elastic properties of nonionic surfactant films: Thermodynamics of balanced microemulsions
- 2006
-
Ingår i: Physical Review E (Statistical, Nonlinear, and Soft Matter Physics). - 1539-3755. ; 73:4: 041506
-
Tidskriftsartikel (refereegranskat)abstract
- The free energy of nonionic balanced microemulsions based on nonionic surfactants are analyzed using experimental data from (i) phase behavior, (ii) osmotic compressibility of the balanced microemulsion structure, which is obtained from small angle neutron scattering (SANS) experiments, and (iii) data on interfacial tensions obtained by T. Sottmann and R. Strey [J. Chem. Phys. 106 8606 (1997)]. The balanced microemulsion, where the spontaneous curvature vanishes at equal volumes of water and oil, has a finite swelling with the solvent with a minimum surfactant volume fraction, Phi(*)(S). At higher surfactant concentrations the balanced microemulsion phase having the surfactant volume fraction Phi(S1) coexists with a lamellar phase of volume fraction Phi(S2). Under the constraint of Phi(W)=Phi(O), where Phi(W) and Phi(O) are the water and oil volume fractions, respectively, the free energy density can be written as an expansion in the surfactant concentration. While the phase equilibria only depend on relative values of the expansion coefficients, absolute values can be obtained from compressibility and interfacial tension data. The osmotic compressibility of the surfactant film was measured by SANS through contrast matching water and oil. The phase behavior of nonionic surfactant-water-oil systems depends strongly on the chain length of the oil, when comparing a homologous series from octane to hexadecane using the same surfactant, here being pentaethylene oxide dodecyl ether (C12E5). The three concentrations Phi(*)(S), Phi(S1), and Phi(S2) increase markedly as the chain length of the oil is increased. However, from the analysis of the surface tension data it is concluded that there are no major changes in the bending rigidities as the oil is changed. The data are analyzed within the model free energy densities G/V=a(3)Phi(3)(S)+a(5)Phi(5)(S) and G/V=a Phi(3)(S)(1+b ln Phi(S)). We find that within experimental accuracy, the first of these models provides a quantitatively consistent description of the data. For the second model there is a larger discrepancy between observed and calculated values.
|
|
| 4. |
|
|
| 5. |
- Bryhn, Andreas, et al.
(författare)
-
Fisk- och skaldjursbestånd i hav och sötvatten 2020 : Resursöversikt
- 2021
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- I rapporten kan du ta del av bedömningen som görs av situationen för bestånd som regleras inom ramen för EU:s gemensamma fiskeripolitik (GFP). Bedömningarna baseras på det forskningssamarbete och den rådgivning som sker inom det Internationella Havsforskningsrådet (ICES). Totalt redovisas underlag och råd för 48 fisk- och skaldjursarter.De bestånd som förvaltas nationellt baseras på de biologiska underlagen, och rådgivningen i huvudsak på den forskning och övervakning samt analys som bedrivs av Institutionen för akvatiska resurser vid Sveriges lantbruksuniversitet (SLU Aqua) samt yrkesfiskets rapportering.
|
|
| 6. |
- Bulut, Sanja, et al.
(författare)
-
Fusion of Nonionic Vesicles
- 2010
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 26:8, s. 5421-5427
-
Tidskriftsartikel (refereegranskat)abstract
- We present an experimental study of vesicle fusion using light and neutron scattering to monitor fusion events. Vesicles are reproducibly formed with an extrusion procedure using an single amphiphile triethylene glycol mono-n-decyl ether in water. They show long-term stability for temperatures around 20 C, but at temperatures above 26 C we observe an increase in the scattered intensity due to fusion. The system is unusually well suited for the study of basic mechanisms of vesicle fusion. The vesicles are flexible with a bending rigidity of only a few k(H)T. The monolayer spontaneous curvature, Ho, depends strongly on temperature in a known way and is thus tunable. For temperatures where H-0 > 0 vesicles tyre long-term stable, while in the range H-0 < 0 the fusion rate increases the more negative the Spontaneous curvature Through a quantitative;analysis of the fusion rate we arrive tit a barrier to fusion changing from 15 k(B)T at T = 26 degrees C to 10k(H) T at T = 35 degrees C. These results are compatible with the theoretical predictions using the stalk model of vesicle fusion.
|
|
| 7. |
- Bulut, Sanja, et al.
(författare)
-
Lamellar phase separation in a centrifugal field. A method for measuring interbilayer forces
- 2010
-
Ingår i: Soft Matter. - : Royal Society of Chemistry (RSC). - 1744-6848 .- 1744-683X. ; 6:18, s. 4520-4527
-
Tidskriftsartikel (refereegranskat)abstract
- We present a novel method for measuring interbilayer forces in lamellar liquid crystals of amphiphile-water systems. In a centrifuge the gravitational effect is easily strong enough to produce clearly observable concentration gradients. During the experiment the concentration profile in the test-tube is monitored using NMR imaging of the deuterium quadrupole splitting in the lamellar phase, by temporarily transferring the sample into a NMR spectrometer. We also present a theoretical analysis of the experiment, where interactions dominate over entropy of mixing effects. For a system at sedimentation equilibrium one obtains a direct measurement of the interbilayer force, or equivalently chemical potential of the components over a substantial concentration range. It requires long times to obtain equilibrium in the centrifuge but very useful information about equilibrium and dynamic parameters is also obtained through an analysis of the sedimentation process. Experiments were performed on samples of a dilute lamellar phase of the non-ionic surfactant C10E3. After a few days of centrifugation a consistent concentration pattern was observed. At the bottom of the sample there appears a pure water-phase. The concentration profiles stabilize after a long centrifugation time. If they are related to the phase boundary the different profiles superimpose. This observation is consistent with the theory and the observation allows for a determination of how the chemical potentials vary with composition. The observed profiles are consistent with a dominating undulation force with a bilayer bending rigidity of 4.8-5.1 kT.
|
|
| 8. |
- Costa, Fatima, et al.
(författare)
-
How small polar molecules protect membrane systems against osmotic stress: The urea-water-phospholipid system
- 2006
-
Ingår i: The Journal of Physical Chemistry Part B. - : American Chemical Society (ACS). - 1520-5207 .- 1520-6106. ; 110:47, s. 23845-23852
-
Tidskriftsartikel (refereegranskat)abstract
- We investigate how a small polar molecule, urea, can act to protect a phospholipid bilayer system against osmotic stress. Osmotic stress can be caused by a dry environment, by freezing, or by exposure to aqueous systems with high osmotic pressure due to solutes like in saline water. A large number of organisms regularly experience osmotic stress, and it is a common response to produce small polar molecules intracellularly. We have selected a ternary system of urea-water-dimyristoyl phosphatidylcholine (DMPC) as a model to investigate the molecular mechanism behind this protective effect, in this case, of urea, and we put special emphasis on the applications of urea in skin care products. Using differential scanning calorimetry, X-ray diffraction, and sorption microbalance measurements, we studied the phase behavior of lipid systems exposed to an excess of solvent of varying compositions, as well as lipid systems exposed to water at reduced relative humidities. From this, we have arrived at a rather detailed thermodynamic characterization. The basic findings are as follows: (i) In excess solvent, the thermally induced lipid phase transitions are only marginally dependent on the urea content, with the exception being that the P, phase is not observed in the presence of urea. (ii) For lipid systems with limited access to solvent, the phase behavior is basically determined by the amount (volume) of solvent irrespective of the urea content. (iii) The presence of urea has the effect of retaining the liquid crystalline phase at relative humidities down to 64% (at 27 degrees C), whereas, in the absence of urea, the transition to the gel phase occurs already at a relative humidity of 94%. This demonstrates the protective effect of urea against osmotic stress. (iv) In skin care products, urea is referred to as a moisturizer, which we find slightly misleading as it replaces the water while keeping the physical properties unaltered. ( v) In other systems, urea is known to weaken the hydrophobic interactions, while for the lipid system we find few signs of this loosening of the strong segregation into polar and apolar regions on addition of urea.
|
|
| 9. |
- Danielsson, Jens, et al.
(författare)
-
Thermodynamics of protein destabilization in live cells
- 2015
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 112:40, s. 12402-12407
-
Tidskriftsartikel (refereegranskat)abstract
- Although protein folding and stability have been well explored under simplified conditions in vitro, it is yet unclear how these basic self-organization events are modulated by the crowded interior of live cells. To find out, we use here in-cell NMR to follow at atomic resolution the thermal unfolding of a beta-barrel protein inside mammalian and bacterial cells. Challenging the view from in vitro crowding effects, we find that the cells destabilize the protein at 37 degrees C but with a conspicuous twist: While the melting temperature goes down the cold unfolding moves into the physiological regime, coupled to an augmented heat-capacity change. The effect seems induced by transient, sequence-specific, interactions with the cellular components, acting preferentially on the unfolded ensemble. This points to a model where the in vivo influence on protein behavior is case specific, determined by the individual protein's interplay with the functionally optimized interaction landscape of the cellular interior.
|
|
| 10. |
- Evilevitch, Alex, et al.
(författare)
-
Kinetics of oil solubilization in microemulsion droplets. Mechanism of oil transport.
- 2001
-
Ingår i: Electroanalysis. - : American Chemical Society (ACS). - 1040-0397. ; 16:23, s. 8755-8762
-
Tidskriftsartikel (refereegranskat)abstract
- We have studied the kinetics of the solubilization of oil through a temperature jump into a droplet microemulsion phase in the system water-pentaethylene oxide dodecyl ether-decane at 25 C. The initial state is formed by subjecting the equilibrium system at 25 C to a temperature quench to 22, 20, and 14 C, respectively. At this lower temperature, which at equilibrium corresponds to a two-phase system, oil droplets form and grow in size with increasing time. By varying the time between the quench and the T-jump, the size of the initial oil drops is varied in a systematic and known way in the relaxation study. The relaxation process is monitored by following the turbidity of the system. We find that for all the systems the relaxation back to equlibrium is much faster than the drop growth process observed after the temperature quench. This general observation is explained by realizing that the redissolution of the oil drops is analogous to the oil transfer phase, which in the quench experiment occurs prior to the Ostwald ripening phase. More significant is that we observed a qualitative transition in the relaxation behavior when the initial aggregate distribution is varied. In all cases we have the same initial temperature and overall composition and one population of many small droplets and fewer larger drops. The size of the larger drops only affects the relaxation in a quantitative way. If the small droplets are only slightly smaller than the equilibrium size, equilibration occurs through the diffusion of oil molecules in the bulk phase. When the initial droplets are sufficiently small, a new kinetic route is available where there is an efficient direct oil transfer between the small droplets and large drops. This allows for a fast relaxation of the oil distribution between the two populations of drops.
|
|
