| 1. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 2. |
- Liu, Xueqi, et al.
(författare)
-
Study on charge transportation in the layer-structured oxide composite of SOFCs
- 2018
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 43:28, s. 12773-12781
-
Tidskriftsartikel (refereegranskat)abstract
- In the past few years, triple (H+/O2-/e(-)) conducting materials have been regarded as one of the most promising electrode categories for solid oxide fuel cells (SOFCs). In this work, a layer-structured LiNi0.8Co0.15Al0.05O2-delta (LNCA) with triple conduction has been studied. The semiconductor-ionic conductor (SIC) LNCA-SDC composite has been fabricated by compositing the LNCA material with ionic conductor, i.e., samarium doped ceria (SDC). The electrochemical performance of the LNCA-SDC composite was studied by electrochemical impedance spectroscopy, while its electronic conductivity was confirmed by d.c. polarization method. It is found that the ionic conductivity of the composite is higher than the electronic conductivity by several orders of magnitude. The charge carriers and transportation properties of LNCA-SDC were studied using H+ and O2- blocking layer cells respectively. Results prove that the LNCA-SDC composite is a hybrid oxygen ion-proton conducting material. The oxygen ion conduction is dominated at low temperature (425 -500 degrees C), however, it is comparable with H+ conduction at high temperature (550 degrees C). Additionally, the formation of Li2CO3 under fuel cell operation environment was observed and the mechanism of the hybrid conductivity of LNCA-SDC was studied.
|
|
| 3. |
- Liu, Yanyan, et al.
(författare)
-
Natural CuFe2O4 mineral for solid oxide fuel cells
- 2017
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 42:27, s. 17514-17521
-
Tidskriftsartikel (refereegranskat)abstract
- Natural mineral, cuprospinel (CuFe2O4) originated from natural chalcopyrite ore (CuFeS2), has been used for the first time in low temperature solid oxide fuel cells. Three different types of devices are fabricated to explore the optimum application of CuFe2O4 in fuel cells. Device with CuFe2O4 as a cathode catalyst exhibits a maximum power density of 180 mW/cm(2) with an open circuit voltage 1.07 V at 550 degrees C. And a power output of 587 mW/cm(2) is achieved from the device using a homogeneous mixture membrane of CuFe2O4, Li2O-ZnO-Sm0.2Ce0.8O2 and LiNi0.8Co0.15Al0.05O2. Electrochemical impedance spectrum analysis reveals different mechanisms for the devices. The results demonstrate that natural mineral, chalcopyrite, can provide a new implementation to utilize the natural resources for next generation fuel cells being cost-effective and make great contributions to the environmentally friendly sustainable energy.
|
|
| 4. |
- Luo, Ziteng, et al.
(författare)
-
Roots-Enhanced Preferential Flows in Deciduous and Coniferous Forest Soils Revealed by Dual-Tracer Experiments
- 2019
-
Ingår i: Journal of Environmental Quality. - : Wiley. - 0047-2425. ; 48:1, s. 136-146
-
Tidskriftsartikel (refereegranskat)abstract
- Macropores formed by roots are crucial channels for preferential flows in forest soils that are largely responsible for water percolation and solute leaching. Using dual-tracer experiments (Brilliant Blue FCF and bromide [Br]), this study investigated the preferential flows of water and solutes in a deciduous forest dominated by Bl. and a coniferous forest mainly planted with (L.) Franco. Dye-stained patterns and concentrations of Brilliant Blue and Br were obtained in vertical soil profiles (0-30 cm), whereas stained and unstained roots were collected and analyzed in horizontal soil profiles to a 30-cm soil depth. Brilliant Blue and Br were mainly accumulated in the 0- to 20-cm soil depth, which had greater total root length density than the 20- to 30-cm soil depth ( < 0.05). Only part of the roots facilitated the preferential flows, with finer roots (i.e., diameter <1 mm) contributing the most. More intriguingly, the coniferous forest soil had a greater degree of preferential flows and greater tracer concentrations at deeper soil depth than the deciduous forest soil, suggesting the importance of tree species and forest composition on water and solute transport in forest ecosystems.
|
|
| 5. |
- Wang, Xunying, et al.
(författare)
-
La0.1SrxCa0.9-xMnO3-δ -Sm0.2Ce0.8O1.9 composite material for novel low temperature solid oxide fuel cells
- 2017
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 42:27, s. 17552-17558
-
Tidskriftsartikel (refereegranskat)abstract
- Lowering the operating temperature of the solid oxide fuel cells (SOFCs) is one of the world R&D tendencies. Exploring novel electrolytes possessing high ionic conductivity at low temperature becomes extremely important with the increasing demands of the energy conversion technologies. In this work, perovskite La0.1SrxCa0.9-xMnO3-δ (LSCM) materials were synthesized and composited with the ionic conductor Sm0.2Ce0.8O1.9 (SDC). The LSCM-SDC composite was sandwiched between two nickel foams coated with semiconductorNi0.8Co0.15Al0.05LiO2- δ (NCAL) to form the fuel cell device. The strontium content in theLSCM and the ratios of LSCM to SDC in the LSCM-SDC composite have significant effects on the electrical properties and fuel cell performances. The best performance has been achieved from LSCM-SDC composite with a weight ratio of 2:3. The fuel cells showed OCV over 1.0 V and excellent maximum output power density of 800 mW/cm2 at 550 ºC. Device processes and ionic transport processes were also discussed.
|
|
| 6. |
- Xia, Chen, et al.
(författare)
-
Natural Mineral-Based Solid Oxide Fuel Cell with Heterogeneous Nanocomposite Derived from Hematite and Rare-Earth Minerals
- 2016
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 8:32, s. 20748-20755
-
Tidskriftsartikel (refereegranskat)abstract
- Solid oxide fuel cells (SOFCs) have attracted much attention worldwide because of their potential for providing clean and reliable electric power. However, their commercialization is subject to the high operating temperatures and costs. To make SOFCs more competitive, here we report a novel and attractive nanocomposite hematite LaCePrOx (hematite LCP) synthesized from low-cost natural hematite and LaCePr-carbonate mineral as an electrolyte candidate. This heterogeneous composite exhibits a conductivity as high as 0.116 S cm(-1) at 600 degrees C with an activation energy of 0.50 eV at 400-600 degrees C. For the first time, a fuel cell using such a natural mineral-based composite demonstrates a maximum power density of 625 mW cm(-2) at 600 degrees C and notable power output of 386 mW cm(-2) at 450 degrees C. The extraordinary ionic conductivity and device performances are primarily attributed to the heterophasic interfacial conduction effect of the hematite-LCP composite. These superior properties, along with the merits of ultralow cost, abundant storage, and eco-friendliness, make the new composite a highly promising material for commercial SOFCs.
|
|
