| 1. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 2. |
|
|
| 3. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 4. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 5. |
- Shi, Zhi Sheng, et al.
(författare)
-
Enrichment of Ni–Mo–V via pyrometallurgical reduction from spent hydrogenation catalysts and the multi-reaction mechanism
- 2023
-
Ingår i: Rare Metals. - 1001-0521 .- 1867-7185. ; 42:8, s. 2700-2712
-
Tidskriftsartikel (refereegranskat)abstract
- Spent hydrogenation catalysts are important secondary resources due to richness in the valuable metals of Ni, Mo and V. Recovery of valuable metals from spent catalysts has high economic value and environmental benefits since they are hazardous wastes as well. Traditional recycling processes including hydrometallurgical leaching and soda roasting-leaching have disadvantages such as generating large amounts of wastewater, long process, and low recovery efficiency of valuable metals. Thus, this paper proposed synergistic enrichment of Ni, Mo and V via pyrometallurgical reduction at 1400–1500 °C. The melting temperature and viscosity of slag were reduced through slag designing by software FactSage 7.1. The phase diagram of Al2O3-CaO-SiO2-Na2O-B2O3 was drawn, and low-temperature region (≤ 1300 °C) was selected as target slag composition. Ni, Mo, and V can be collaborative captured and recovered through the mutual solubility at molten state. Increasing the melting temperature and the amount of CaO, Na2O and C were conducive to improving the metals recovery rates. The kilogram-scale experiments were carried out, and the recovery efficiencies of Ni, Mo and V were 98.3%, 95.3% and 97.9% under optimized conditions: at 1500 °C, with the basicity of 1.0, 13.1 wt% SiO2, 7.0 wt% B2O3, 7.7 wt% Na2O and 20.0 wt% C. The distribution behavior of valuable metals was clarified by investigating the melting process of slag and the reduction in valuable metals. Ni was preferentially reduced and acted as a capturing agent, which captured other metals to form NiMoV alloys. Graphical abstract: [Figure not available: see fulltext.]
|
|
| 6. |
- Bo, Qi-Bing, et al.
(författare)
-
A new family of 3D 3d-4f heterometallic frameworks comprising 1D inorganic lanthanide ladders and organic Cu-bipyridine chains
- 2008
-
Ingår i: CrystEngComm. - : Royal Society of Chemistry (RSC). - 1466-8033 .- 1466-8033. ; 10:2, s. 232-238
-
Tidskriftsartikel (refereegranskat)abstract
- A new family of the 3D heterometallic coordination polymers [{Ln2(SO4)2(H2O)2(pydc)2Cu2 (bpy)2·2(H2O)}]n (Ln = Sm ( 1), Eu ( 2), Gd ( 3), Tb ( 4) and Dy ( 5); pydc = 2,6-pyridine-dicarboxylate anion; bpy= 4,4-bipyridine) have successfully been synthesized under solvothermal conditions (H2O/ethanol). All the coordination polymers obtained were characterized by elemental analysis, FT-IR analysis, differential thermal analysis/thermogravimetry (DTA/TG), fluorescent spectra and single crystal X-ray diffraction analysis. The most intriguing structural feature is that all the compounds exhibit 3D frameworks with 1D inorganic lanthanide ladders and organic CuI-bipyridine chains, which represent two types of 3d/4f coordination polymers (form I: Ln = Sm and Eu; form II: Ln = Gd, Tb and Dy) as the result of a so-called gadolinium break effect. Additionally, compounds 2 and 4 showed the characteristic emission spectra of the EuIII and TbIII ions, respectively, and appeared to have good fluorescence properties, while 1, 3 and 5 emitted fluorescence resembling CuI complexes. To our knowledge, the investigation of the
|
|
| 7. |
- Bo, Qi-Bing, et al.
(författare)
-
Simple directed material design through in situ substitution of proton with Cu+ ions
- 2009
-
Ingår i: Journal of Inorganic and Organometallic Polymers and Materials. - : Springer Science and Business Media LLC. - 1574-1443 .- 1574-1451. ; 19:4, s. 485-493
-
Tidskriftsartikel (refereegranskat)abstract
- A new inorganic-organic hybrid material (C10H8N2H)2(Mo8O26) · 2NH4 (1) was prepared under solvothermal conditions (H2O/ethanol), which was then used as a starting material in the synthesis of another material, (C10H8N2Cu)2(Mo8O26) · 2NH4 (2). Each compound has been characterized by single-crystal X-ray diffraction, X-ray powder diffraction, elemental analysis, thermogravimetric analysis, fluorescence, FT-IR, and bond valence sum calculations. The comparative study focuses on the transformation and structural change between 1 and 2, which arises from the simple substitution of the proton in 1 with the Cu+ ions. The other surprising feature is that Cu+ ions can not only directly be used to substitute the proton of 1 but also ameliorate its photoluminescence property. It means that 1 appears to have recognizable functional protons in the solid-state structure and, hence, can very well be considered as an ideal precursor agent to design the functional materials with special architectures and photoactive properties.
|
|
| 8. |
- Cheng, Qin-Bo, et al.
(författare)
-
Improvement and comparison of likelihood functions for model calibration and parameter uncertainty analysis within a Markov chain Monte Carlo scheme
- 2014
-
Ingår i: Journal of Hydrology. - : Elsevier BV. - 0022-1694 .- 1879-2707. ; 519:Part B, s. 2202-2214
-
Tidskriftsartikel (refereegranskat)abstract
- Summary In this study, the likelihood functions for uncertainty analysis of hydrological models are compared and improved through the following steps: (1) the equivalent relationship between the Nash–Sutcliffe Efficiency coefficient (NSE) and the likelihood function with Gaussian independent and identically distributed residuals is proved; (2) a new estimation method of the Box–Cox transformation (BC) parameter is developed to improve the effective elimination of the heteroscedasticity of model residuals; and (3) three likelihood functions—NSE, Generalized Error Distribution with BC (BC-GED) and Skew Generalized Error Distribution with BC (BC-SGED)—are applied for SWAT-WB-VSA (Soil and Water Assessment Tool – Water Balance – Variable Source Area) model calibration in the Baocun watershed, Eastern China. Performances of calibrated models are compared using the observed river discharges and groundwater levels. The result shows that the minimum variance constraint can effectively estimate the BC parameter. The form of the likelihood function significantly impacts on the calibrated parameters and the simulated results of high and low flow components. SWAT-WB-VSA with the NSE approach simulates flood well, but baseflow badly owing to the assumption of Gaussian error distribution, where the probability of the large error is low, but the small error around zero approximates equiprobability. By contrast, SWAT-WB-VSA with the BC-GED or BC-SGED approach mimics baseflow well, which is proved in the groundwater level simulation. The assumption of skewness of the error distribution may be unnecessary, because all the results of the BC-SGED approach are nearly the same as those of the BC-GED approach.
|
|
| 9. |
- Deng, Min, et al.
(författare)
-
Genome-wide association analyses in Han Chinese identify two new susceptibility loci for amyotrophic lateral sclerosis
- 2013
-
Ingår i: Nature Genetics. - : Nature Publishing Group. - 1061-4036 .- 1546-1718. ; 45:6, s. 697-
-
Tidskriftsartikel (refereegranskat)abstract
- To identify susceptibility genes for amyotrophic lateral sclerosis (ALS), we conducted a genome-wide association study (GWAS) in 506 individuals with sporadic ALS and 1,859 controls of Han Chinese ancestry. Ninety top SNPs suggested by the current GWAS and 6 SNPs identified by previous GWAS were analyzed in an independent cohort of 706 individuals with ALS and 1,777 controls of Han Chinese ancestry. We discovered two new susceptibility loci for ALS at 1q32 (CAMK1G, rs6703183, P-combined = 2.92 x 10(-8), odds ratio (OR) = 1.31) and 22p11 (CABIN1 and SUSD2, rs8141797, P-combined = 2.35 x 10(-9), OR = 1.52). These two loci explain 12.48% of the overall variance in disease risk in the Han Chinese population. We found no association evidence for the previously reported loci in the Han Chinese population, suggesting genetic heterogeneity of disease susceptibility for ALS between ancestry groups. Our study identifies two new susceptibility loci and suggests new pathogenic mechanisms of ALS.
|
|
| 10. |
- Huang, Zi-Nan, et al.
(författare)
-
Analysis of the stress field in the reactor vessel of the China Initiative Accelerator Driven System during postulated ULOF and UTOP transients
- 2023
-
Ingår i: Annals of Nuclear Energy. - : Elsevier BV. - 0306-4549 .- 1873-2100. ; 194
-
Tidskriftsartikel (refereegranskat)abstract
- The China Initiative Accelerator Driven System (CiADS) was proposed by China Academy of Science since 2015. The subcritical reactor in CiADS is a liquid Lead Bismuth Eutectic (LBE) cooled fast reactor. When the reactor core is in operation, the LBE coolant will directly contact and corrode the inner surface of reactor vessel. Due to the high temperature, the corrosion will be more severe. If the stress on the reactor vessel exceeds the limit, the plastic deformation will occur, leading to the generation and expansion of defects and cracks, and the safety of the reactor will be affected. Therefore, evaluating the stress field of the reactor vessel under different operating conditions is a very important research project. In this paper, the finite element analysis software ADINA was applied to analyze the reactor vessel in CiADS, and the ASME Code was used as stress assessment standards. We can preliminarily prove that the stress assessments of the vessel during the postulated Unprotected Loss of Flow (ULOF) accidents satisfy the requirements of ASME Code. The limit reactivity insertion to protect the vessel from plastic deformation is 0.58$ in the postulated Unprotected Transient over Power (UTOP) accidents based on our current results. Therefore, we can preliminarily conclude that the current material selection and structural design of the reactor vessel in CiADS could survive most of the postulated transient accidents considering the stress effect.
|
|
