| 1. |
- Cai, Yixiao, 1986-
(författare)
-
Bio-Nano Interactions : Synthesis, Functionalization and Characterization of Biomaterial Interfaces
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Current strategies for designing biomaterials involve creating materials and interfaces that interact with biomolecules, cells and tissues. This thesis aims to investigate several bioactive surfaces, such as nanocrystalline diamond (NCD), hydroxyapatite (HA) and single crystalline titanium dioxide, in terms of material synthesis, surface functionalization and characterization.Although cochlear implants (CIs) have been proven to be clinically successful, the efficiency of these implants still needs to be improved. A CI typically only has 12-20 electrodes while the ear has approximately 3400 inner hair cells. A type of micro-textured NCD surface that consists of micrometre-sized nail-head-shaped pillars was fabricated. Auditory neurons showed a strong affinity for the surface of the NCD pillars, and the technique could be used for neural guidance and to increase the number of stimulation points, leading to CIs with improved performance.Typical transparent ceramics are fabricated using pressure-assisted sintering techniques. However, the development of a simple energy-efficient production method remains a challenge. A simple approach to fabricating translucent nano-ceramics was developed by controlling the morphology of the starting ceramic particles. Translucent nano-ceramics, including HA and strontium substituted HA, could be produced via a simple filtration process followed by pressure-less sintering. Furthermore, the application of such materials as a window material was investigated. The results show that MC3T3 cells could be observed through the translucent HA ceramic for up to 7 days. The living fluorescent staining confirmed that the MC3T3 cells were visible throughout the culture period.Single crystalline rutile possesses in vitro bioactivity, and the crystalline direction affects HA formation. The HA growth on (001), (100) and (110) faces was investigated in a simulated body fluid in the presence of fibronectin (FN) via two different processes. The HA layers on each face were analysed using different characterization techniques, revealing that the interfacial energies could be altered by the pre-adsorbed FN, which influenced HA formation.In summary, micro textured NCD, and translucent HA and FN functionalized single crystalline rutile, and their interactions with cells and biomimetic HA were studied. The results showed that controlled surface properties are important for enhancing a material’s biological performance.
|
|
| 2. |
- Wei, Zhu, et al.
(författare)
-
Injectable and assembled 3D solid structure for free-to-fixed shape in bone reconstruction
- 2020
-
Ingår i: Applied Materials Today. - : Elsevier BV. - 2352-9407. ; 21
-
Tidskriftsartikel (refereegranskat)abstract
- There is a gap between injectable and scaffold-like bioceramics. Injectable bioactive materials, such as bone cement and hydrogel, are good for minimized surgery, but the extremely low porosity and small pore size limited enhanced bone repair and regeneration. Macroporous bioceramic scaffolds are used because of the controlled pore size and porosity, but not injectable. It's a challenge of preparation of an injectable macroporous ceramic scaffold for minimized bone reconstruction. By using the reversible setting reaction of calcium sulfate and combining a dual setting system with magnesium silicate hydrate, the injectable and assembled 3D porous bioceramic scaffold has been successfully developed. The content of amorphous magnesium silicate hydrate in the dual setting system affected the mechanical strength and degradation. The porous structure could be controlled by the size of granules. The granules can also be used for the fabrication of porous materials with varied shapes and customized structures by using a simple injection process. The biological testing showed good biocompatibility and in vitro osteogenesis. By using the femoral lateral condyle defect model, we can see the granules could be injected into the defect and formed a rigid porous structure in situ, and further presented better new bone formation compared with autologous bone chips. Briefly, we demonstrated the first injectable 3D solid porous ceramic structure for minimized bone repair and free-form shaping.
|
|
| 3. |
- Berg, Camilla
(författare)
-
Ceramic Core–Shell Particles : Synthesis and Use within Dentistry
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Dentin hypersensitivity is one of the most prevalent conditions related to oral health, affecting a large share of the adult population. Shortcomings with the available treatment options are related to non-ideal particle sizes and degradation properties. An improved clinical outcome could possibly be obtained using a bioactive occluding agent that can offer a high, continuous release of ions, as well as having a particle size that allows for penetration into the dentin tubules. The work in this thesis focused on the development and investigation of a synthesis approach for calcium phosphate core–shell particles and the use of those in the treatment of dentin hypersensitivity. The overall aim was to increase the knowledge about the synthesis and to evaluate the in vitro performance of amorphous calcium magnesium phosphate (ACMP) particles when used as an occluding agent. The synthesis of the core-shell particles was based on precipitation reactions in aqueous solutions and the synthesized materials were studied in terms of morphological, structural, and compositional aspects. Resulting particles had diameters ranging from 400 nm–1. 5 µm (depending on reaction conditions), with morphologies and structures that were shown to correlate with the ionic radius and the concentration of the substituting ion. This insight resulted in the possibility to control the outcome of the reaction and to extend the synthesis to other alkaline earth phosphates. The mechanism of formation was suggested to be the simultaneous precipitation of primary nanoparticles (NPs) and the formation of gas bubbles that could function as soft templates.A study of the degradation properties together with a series of in vitro studies, using a dentin-disc model, indicated that the ACMP particles may be a promising candidate for clinical use. The material was shown to offer a rapid and continuous release of Ca2+, Mg2+, and phosphate, aiding surface, as well as intratubular occlusion and mineralization. Additional use of a fluoride toothpaste resulted in incorporation of F– in the mineralized material. This could enhance the in vivo performance due to the known benefits of including F– in dental tissues, e.g. decreased solubility. The ACMP particles were, furthermore, shown to be more efficient in terms of degree of occlusion when compared to other similar products available on the market. The intratubular mineralization was additionally mitigating the effect of an acid attack, which is of importance for a long-lasting effect in clinical use.
|
|
| 4. |
- Cheng, Kaiyuan, et al.
(författare)
-
Injectable tricalcium phosphate/calcium sulfate granule enhances bone repair by reversible setting reaction
- 2021
-
Ingår i: Biochemical and Biophysical Research Communications - BBRC. - : Elsevier. - 0006-291X .- 1090-2104. ; 557, s. 151-158
-
Tidskriftsartikel (refereegranskat)abstract
- Towards repairing bone defects, calcium sulfate and calcium phosphate cement have been recognized as promising bone grafts. However, the current bone cements are generally lack of proper porosity for cell migration and new tissue formation. On the other hand, porous scaffold cannot be delivered by injection, which limits its use its clinical use. Herein, we develop a novel tricalcium phosphate/calcium sulfate granule to overcome the limitations of injectable cements and traditional scaffolds. The biocompatible granule underwent in situ self-setting to form scaffold with porous structure after injection. It con-tributes to calcium deposition and upregulation of osteogenic genes of mesenchymal stem cells in a time-dependent manner. Within three months, cavitary bone defects of distal rabbit femurs implanted the granules exhibited better bone formation than those with those implanted with autologous bone.
|
|
| 5. |
- Fu, Le, et al.
(författare)
-
Biodegradable Si3N4 bioceramic sintered with Sr, Mg and Si for spinal fusion : Surface characterization and biological evaluation
- 2018
-
Ingår i: Applied Materials Today. - : Elsevier BV. - 2352-9407. ; 12, s. 260-275
-
Tidskriftsartikel (refereegranskat)abstract
- Silicon nitride (Si3N4) is an industrial ceramic used in spinal fusion and maxillofacial reconstructionbecause of its excellent mechanical properties and good biocompatibility. This study compares the sur-face properties, apatite formation ability, bacterial infection, cell-biomaterial interactions, and in vivotoxicity (zebrafish) of newly developed Si3N4 bioceramics (sintered with bioactive sintering additivesSrO, MgO and SiO2) with two standard biomaterials; titanium (Ti) and traditional Si3N4 bioceramics (sin-tered with standard sintering additives Al2O3 and Y2O3). In general, Si3N4 bioceramics (both the newlydeveloped and the traditional) displayed less in vitro bacterial affinity than Ti, which may arise fromdifferences in the surface properties between these two types of material. The newly developed Si3N4bioceramics developed lower biofilm coverage and thinner biofilm, compared to traditional Si3N4 bioce-ramics. The effects of ionic dissolution products (leach) on proliferation and differentiation of MC3T3-E1cell were also investigated. Ionic dissolution products containing moderate amount of Sr, Mg and Siions (approximately 4.72 mg/L, 3.26 mg/L and 3.67 mg/L, respectively) stimulated osteoblast prolifera-tion during the first 2 days in culture. Interestingly, ionic dissolution products from the traditional Si3N4bioceramics that contained small amount of Si and Y ions achieved the greatest stimulatory effect foralkaline phosphatase activity after 7 days culture. The toxicity of ionic dissolution products was investi-gated in a putative developmental biology model: zebrafish (Danio rerio). No toxicity, or developmentalabnormalities, was observed in zebrafish embryos exposed to ionic dissolution products, for up to 144 hpost fertilization. These newly developed Si3N4 bioceramics with bioactive sintering additives show greatpotential as orthopedic implants, for applications such as spinal fusion cages. Future work will focus onevaluation of the newly developed Si3N4 bioceramics using a large animal model.
|
|
| 6. |
- Hu, Zhekai, et al.
(författare)
-
Nano-Structure Designing Promotion Osseointegration of Hydroxyapatite Coated Ti-6Al-4V Alloy Implants in Diabetic Model
- 2019
-
Ingår i: Journal of Biomedical Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1550-7033 .- 1550-7041. ; 15:8, s. 1701-1713
-
Tidskriftsartikel (refereegranskat)abstract
- Mammalian diabetes mellitus which contains altered microenvironment always impairs diverse cellular processes such as osteogenesis, angiogenesis and tissue regeneration via different mechanisms. For researches in materials science, modifying the ability of osteogenesis and angiogenesis in dental implants shows its significant importance. Nano-structure designing is considered as a facile strategy to improve the surface bioactivity of the implants. In this study, the nanorod-structured hydroxyapatite (HA) coatings on Ti-6Al-4V implants were facilely designed by the combination of plasma-spraying and hydrothermal treatment via varying reaction media. Intriguingly, hydrothermal treatment eliminated the glassy phase and impurity phases of HA coatings, and nanorod-structured surface was successfully constructed under hydrothermal treatment in Na3PO4 solution. Additionally, the HA coatings with nanorod-structured surface effectively promoted the adhesion and proliferation and further enhanced osteogenic differentiation of DM-rBMSCs in vitro, Moreover, the osseointegration of Ti-6Al-4V implants with nanorod-structured HA coating was also enhanced in diabetes mellitus rabbit model in vivo. Therefore, the nano-structured surface modification of HA coating on Ti-6Al-4V implants could target pathological bone loss via strengthening osteogenesis and angiogenesis and further potentially used as a therapeutic coating to promote diabetic osteointegration.
|
|
| 7. |
- Tang, Xiang-long, et al.
(författare)
-
Near-infrared light-activated red-emitting upconverting nanoplatform for T-1-weighted magnetic resonance imaging and photodynamic therapy
- 2018
-
Ingår i: Acta Biomaterialia. - : ELSEVIER SCI LTD. - 1742-7061 .- 1878-7568. ; 74, s. 360-373
-
Tidskriftsartikel (refereegranskat)abstract
- Photodynamic therapy (PDT) has increasingly become an efficient and attractive cancer treatment modality based on reactive oxygen species (ROS) that can induce tumor death after irradiation with ultraviolet or visible light. Herein, to overcome the limited tissue penetration in traditional PDT, a novel near-infrared (NIR) light-activated NaScF4: 40% Yb, 2% Er@CaF2 upconversion nanoparticle (rUCNP) is successfully designed and synthesized. Chlorin e6, a photosensitizer and a chelating agent for Mn2+, is loaded into human serum albumin (HSA) that further conjugates onto rUCNPs. To increase the ability to target glioma tumor, an acyclic Arg-Gly-Asp peptide (cRGDyK) is linked to rUCNPs@HSA(Ce6-Mn). This nanoplatform enables efficient adsorption and conversion of NIR light (980 nm) into bright red emission (660 nm), which can trigger the photosensitizer Ce6-Mn complex for PDT and T-1-weighted magnetic resonance imaging (T-1-weighted MRI) for glioma diagnosis. Our in vitro and in vivo experiments demonstrate that NIR light-activated and glioma tumor-targeted PDT can generate large amounts of intracellular ROS that induce U87 cell apoptosis and suppress glioma tumor growth owing to the deep tissue penetration of irradiated light and excellent tumor-targeting ability. Thus, this nanoplatform holds potential for applications in T-1-weighted MRI diagnosis and PDT of glioma for antitumor therapy. Statement of Significance A near-infrared (NIR) light-activated nanoplatform for photodynamic therapy (PDT) was designed and synthesized. The Red-to-Green (RIG) ratio of NaScF4: 40% Yb, 2% Er almost reached 9, a value that was much higher than that of a traditional Yb/Er-codoped upconversion nanoparticle (rUCNP). By depositing a CaF2 shell, the red-emission intensities of the rUCNPs were seven times strong as that of NaScF4: 40% Yb, 2% Er. The enhanced red-emitting rUCNPs could be applied in many fields such as bioimaging, controlled release, and real-time diagnosis. The nanoplatform had a strong active glioma-targeting ability, and all results achieved on subcutaneous glioma demonstrated that our NIR light-activated redemitting upconverting nanoplatform was efficient for PDT. By loading Ce6-Mn complex into rUCNPs@HSA-RGD, the nanoplatform could be used as a T-1-weighted magnetic resonance imaging agent for tumor diagnosis.
|
|
| 8. |
- Zhu, Wei, et al.
(författare)
-
Cemented injectable multi-phased porous bone grafts for the treatment of femoral head necrosis
- 2019
-
Ingår i: Journal of materials chemistry. B. - : ROYAL SOC CHEMISTRY. - 2050-750X .- 2050-7518. ; 7:18, s. 2997-3006
-
Tidskriftsartikel (refereegranskat)abstract
- Femoral head necrosis (FHN) can induce musculoskeletal disability. It presents a challenge from diagnostic and therapeutic points of view. Open surgery for the treatment of FHN is not an optimal route. To minimize the surgery window, an injectable material with a porous structure and bioactive nature is preferred. The fabrication of an injectable porous bone graft via a simple route was the aim of our study. Therefore, cemented multi-phased calcium phosphate porous granules have been studied with varied phase compositions, pore sizes and porosities, and degradation rates. Granules templated by PEG 100-600 mu m were chosen for cell toxicity and in vitro osteogenic potential testing. Rabbits, making up a femoral head necrosis model, were implanted with granule A. Mature cancellous bone tissue was observed in the femoral head defect after 2 months implantation. The results indicate that the newly formed injectable bioactive porous grafts could be a good candidate for the treatment of femoral head necrosis.
|
|
| 9. |
- Bai, Xuan, et al.
(författare)
-
Sequential macrophage transition facilitates endogenous bone regeneration induced by Zn-doped porous microcrystalline bioactive glass
- 2021
-
Ingår i: Journal of materials chemistry. B. - : Royal Society of Chemistry. - 2050-750X .- 2050-7518. ; 9:12, s. 2885-2898
-
Tidskriftsartikel (refereegranskat)abstract
- Macrophages play an important role in the immune microenvironment during bone healing, and sequential macrophage phenotypic transition could achieve superior osteogenic outcomes. Microcrystalline bioactive glasses (MCBGs) with osteoimmunomodulatory effects show potential in bone tissue regeneration. Zinc (Zn) has been approved to coordinate innate and adaptive immunity. Therefore, in this study, different amounts of ZnO were incorporated into microcrystalline bioactive glass to improve its immunomodulatory ability. The effect of Zn-MCBG ionic extracts on macrophage transition was studied, and the 5Zn-MCBG extracts could orchestrate sequential M1-to-M2 macrophage transition and promote the expression of proinflammatory and anti-inflammatory genes and cytokine expression to induce human bone marrow stromal cells (hBMSCs) osteogenic differentiation in vitro. Macroporous Zn-MCBG scaffolds containing mesopores were fabricated and showed good cell adhesion and feasible apatite formation when immersed in SBF in vitro. Furthermore, a rat calvarial defect model was used to confirm that the Zn-MCBG scaffold could modulate macrophage phenotypic transition and create a desirable osteogenic microenvironment to promote osteogenesis in vivo.
|
|
| 10. |
|
|
