| 1. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 2. |
|
|
| 3. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 4. |
- Meng, Jingxiang, et al.
(författare)
-
Adaptive Differentiation in Seedling Traits in a Hybrid Pine Species Complex, Pinus densata and Its Parental Species, on the Tibetan Plateau
- 2015
-
Ingår i: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 10:3
-
Tidskriftsartikel (refereegranskat)abstract
- Evidence from molecular genetics demonstrates that Pinus densata is a natural homoploid hybrid originating from the parent species Pinus tabuliformis and Pinus yunnanensis, and ecological selection may have played a role in the speciation of Pinus densata. However, data on differentiation in adaptive traits in the species complex are scarce. In this study, we performed a common garden test on 16 seedling traits to examine the differences between Pinus densata and its parental species in a high altitude environment. We found that among the 16 analyzed traits, 15 were significantly different among the species. Pinus tabuliformis had much earlier bud set and a relatively higher bud set ratio but poorer seedling growth, and Pinus yunnanensis had opposite responses for the same traits. Pinus densata had the greatest fitness with higher viability and growth rates than the parents. The relatively high genetic contribution of seedling traits among populations suggested that within each species the evolutionary background is complex. The correlations between the seedling traits of a population within a species and the environmental factors indicated different impacts of the environment on species evolution. The winter temperature is among the most important climate factors that affected the fitness of the three pine species. Our investigation provides empirical evidence on adaptive differentiation among this pine species complex at seedling stages.
|
|
| 5. |
- Xing, Fangqian, et al.
(författare)
-
Needle morphological evidence of the homoploid hybrid origin of Pinus densata based on analysis of artificial hybrids and the putative parents, Pinus tabuliformis and Pinus yunnanensis
- 2014
-
Ingår i: Ecology and Evolution. - : Wiley. - 2045-7758. ; 4:10, s. 1890-1902
-
Tidskriftsartikel (refereegranskat)abstract
- Genetic analyses indicate that Pinus densata is a natural homoploid hybrid originating from Pinus tabuliformis and Pinus yunnanensis. Needle morphological and anatomical features show relative species stability and can be used to identify coniferous species. Comparative analyses of these needle characteristics and phenotypic differences between the artificial hybrids, P.densata, and parental species can be used to determine the genetic and phenotypic evolutionary consequences of natural hybridization. Twelve artificial hybrid families, the two parental species, and P.densata were seeded in a high-altitude habitat in Linzhi, Tibet. The needles of artificial hybrids and the three pine species were collected, and 24 needle morphological and anatomical traits were analyzed. Based on these results, variations in 10 needle traits among artificial hybrid families and 22 traits among species and artificial hybrids were predicted and found to be under moderate genetic control. Nineteen needle traits in artificial hybrids were similar to those in P.densata and between the two parental species, P.tabuliformis and P.yunnanensis. The ratio of plants with three needle clusters in artificial hybrids was 22.92%, which was very similar to P.densata. The eight needle traits (needle length, the mean number of stomata in sections 2mm in length of the convex and flat sides of the needle, mean stomatal density, mesophyll/vascular bundle area ratio, mesophyll/resin canal area ratio, mesophyll/(resin canals and vascular bundles) area ratio, vascular bundle/resin canal area ratio) relative to physiological adaptability were similar to the artificial hybrids and P.densata. The similar needle features between the artificial hybrids and P.densata could be used to verify the homoploid hybrid origin of P.densata and helps to better understand of the hybridization roles in adaptation and speciation in plants.
|
|
| 6. |
|
|
| 7. |
- Fang, Xing, et al.
(författare)
-
Effects of the superheating degree and cooling intensity on the as-cast microstructure of CP780 thin slab
- 2023
-
Ingår i: International Journal of Cast Metals Research. - : Informa UK Limited. - 1364-0461 .- 1743-1336. ; 36:1-3, s. 9-17
-
Tidskriftsartikel (refereegranskat)abstract
- This paper studied the effects of the superheating degree and cooling intensity on the solidification structure of CP 780 slab. The results indicated that the equiaxed crystal ratio decreases with the increase of superheating degree and the cooling intensity. When the superheating degree increases from 15 to 25°C, the equiaxed crystal ratio drops sharply. While the equiaxed crystal ratio decreases slightly with an increasing superheating degree from 25°C to 55°C. It is further revealed that the superheating degree has a greater effect on the equiaxed crystal ratio compared with the influence of cooling intensity. Quantitative analysed the relationship among the equiaxed crystal ratio, the superheating degree and cooling intensity is in line with the Extreme 2D model. The accuracy of the model performance can reach 97.6% when predicting the equiaxed crystal ratio of CSP-CP 780 during CSP process.
|
|
| 8. |
- Fang, Xing, et al.
(författare)
-
Microstructure and mechanical properties of the laser welded air-hardening steel joint
- 2024
-
Ingår i: Materials Characterization. - : Elsevier BV. - 1044-5803 .- 1873-4189. ; 213
-
Tidskriftsartikel (refereegranskat)abstract
- The decrease in mechanical properties of high-strength steel after welding is an important issue affecting the wide application of high-strength steel. Air-hardening steel is a high-strength steel suitable for lower body structural parts such as subframes. Its application process involves welding, hot forming and other processes. The present work investigates the microstructure and mechanical properties of the air-hardening steel laser welded joint that is air-cooled after hot forming in the two-phase zone (800 °C). The microstructure was characterized by electron backscattered diffraction (EBSD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The results show that during hot forming, the welded joint transforms from martensite to ferrite and acicular martensite, and the base metal transforms from ferrite to polygonal martensite and ferrite. The difference in martensite morphology between the welded joint and the base metal is attributed to the nucleation positions of austenite. The structural evolution of the welded joint and the base metal is accompanied with the annihilation and reproduction of dislocations, which results in significant changes in hardness. The hardness value dropped from the highest 430 HV to 271 HV in the welded joint, while increased from the lowest 184 HV to 203 HV in the base metal. After hot forming, the tensile strength of the welded sample is reduced by only 36 MPa, and the total elongation is slightly decreased by about 1.5% compared with the unwelded sample. The welded joint and the base metal have similar plastic deformation capabilities, since the acicular martensite in the welded joint displays good plastic deformation ability, and the dislocation density of the welded joint and the base metal is similar. Overall, the microstructure and dislocation density of the air-hardening steel welded joint after hot forming are similar to those of the base metal, which is responsible for the good mechanical properties of air-hardening steel welded joint.
|
|
| 9. |
- Guo, Hui-Hui, et al.
(författare)
-
Alleviation of allergic asthma by rosmarinic acid via gut-lung axis
- 2024
-
Ingår i: Phytomedicine. - : Elsevier. - 0944-7113 .- 1618-095X. ; 126
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Asthma affects 3% of the global population, leading to over 0.25 million deaths. Due to its complexity, asthma is difficult to cure or prevent, and current therapies have limitations. This has led to a growing demand for alternative asthma treatments. We found rosmarinic acid (RosA) as a potential new drug candidate from natural medicine. However, RosA has poor bioavailability and remains mainly in the gastrointestinal tract after oral administration, suggesting the involvement of gut microbiota in its bioactivity. Purpose: To investigate the mechanism of RosA in alleviating allergic asthma by gut-lung axis. Methods: We used 16S rRNA gene sequencing and metabolites analysis to investigate RosA's modulation of gut microbiota. Techniques of molecular biology and metabolomics were employed to study the pharmacological mechanism of RosA. Cohousing was used to confirm the involvement of gut microbiota in RosA-induced improvement of allergic asthma. Results: RosA decreased cholate levels from spore-forming bacteria, leading to reduced 5-hydroxytryptamine (5HT) synthesis, bronchoconstriction, vasodilation, and inflammatory cell infiltration. It also increased short-chain fatty acids (SCFAs) levels, facilitating the expression of intestinal tight junction proteins to promote intestinal integrity. SCFAs upregulated intestinal monocarboxylate transporters (MCTs), thereby improving their systemic delivery to reduce Th2/ILC2 mediated inflammatory response and suppress eosinophil influx and mucus production in lung. Additionally, RosA inhibited lipopolysaccharide (LPS) production and translocation, leading to reduced TLR4-NF kappa B mediated pulmonary inflammation and oxidative stress. Conclusions: The anti-asthmatic mechanism of oral RosA is primarily driven by modulation of gut microbiotaderived 5-HT, SCFAs, and LPS, achieving a combined synergistic effect. RosA is a safe, effective, and reliable drug candidate that could potentially replace glucocorticoids for asthma treatment.
|
|
| 10. |
|
|
