| 1. |
- Yang, Kunpeng, et al.
(författare)
-
North Atlantic Ocean–Originated Multicentennial Oscillation of the AMOC : A Coupled Model Study
- 2024
-
Ingår i: Journal of Climate. - 0894-8755 .- 1520-0442. ; 37:9, s. 2789-2807
-
Tidskriftsartikel (refereegranskat)abstract
- Using a CESM1 control simulation, we conduct a follow-up study to advance our earlier theoretical research on the multicentennial oscillation (MCO) of the Atlantic meridional overturning circulation (AMOC). The modeled AMOC MCO primarily arises from internal oceanic processes in the North Atlantic, potentially representing a North Atlantic Ocean–originated mode of AMOC multicentennial variability (MCV) in reality. Specifically, this AMOC MCO is mainly driven by salinity variation in the subpolar upper North Atlantic, which dominates local density variation. Salinity anomaly in the subpolar upper ocean is enhanced by the well-known positive salinity advection feedback that is realized through anomalous advection in the subtropical to subpolar upper ocean. Meanwhile, mean advection moves salinity anomaly in the subtropical intermediate ocean northward, weakening the subpolar upper salinity anomaly and leading to its phase change. The salinity anomalies have a clear three-dimensional life cycle around the North Atlantic. The mechanism and time scale of the modeled AMOC MCO are consistent with our earlier theoretical studies. In the theoretical model, artificially deactivating either the anomalous or mean advection in the AMOC upper branch prevents it from exhibiting AMOC MCO, underscoring the indispensability of both the anomalous and mean advections in this North Atlantic Ocean–originated AMOC MCO. In our coupled model simulation, the South Atlantic and Southern Oceans do not exhibit variabilities synchronous with the AMOC MCO; the Arctic Ocean’s contribution to the subpolar upper salinity anomaly is much weaker than the North Atlantic. Hence, this North Atlantic Ocean–originated AMOC MCO is distinct from the previously proposed Southern Ocean–originated and Arctic Ocean–originated AMOC MCOs.
|
|
| 2. |
- Yang, Hengyan, et al.
(författare)
-
New Understanding on Photocatalytic Mechanism of Nitrogen-Doped Graphene Quantum Dots-Decorated BiVO4 Nanojunction Photocatalysts
- 2017
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 2:7, s. 3766-3773
-
Tidskriftsartikel (refereegranskat)abstract
- Bismuth vanadate (BiVO4) is a promising candidate as a visible-light-driven photocatalyst in the aspect of practical applications. To investigate the origin of active species from BiVO4 and understand the influence of the variations of the photocatalytic process, comparative studies on zero-dimensional nitrogen-doped graphene quantum dot (NGQD)-decorated BiVO4 have been carried out for methylene blue photodegradation. It was found that the hydroxyl group-rich NGQD surface and the established heterojunction structure between NGQDs and BiVO4 were greatly beneficial for the conversion of the MOH radical. With NGQD decoration, the dominant oxidant species for NGQDs/BiVO4 were confirmed to be MOH and H2O2, rather than holes originating from the valence band of unmodified BiVO4. The synergistic photocatalytic mechanism with respect to the interfacial charge transport and the conversion of active species was proposed. The achievement of the controllable active species significantly altering the activity may be applied for different photocatalytic reactions.
|
|
| 3. |
- Li, Zheng, et al.
(författare)
-
A Review of Spatter in Laser Powder Bed Fusion Additive Manufacturing: In Situ Detection, Generation, Effects, and Countermeasures
- 2022
-
Ingår i: Micromachines. - : MDPI AG. - 2072-666X. ; 13:8
-
Forskningsöversikt (refereegranskat)abstract
- Spatter is an inherent, unpreventable, and undesired phenomenon in laser powder bed fusion (L-PBF) additive manufacturing. Spatter behavior has an intrinsic correlation with the forming quality in L-PBF because it leads to metallurgical defects and the degradation of mechanical properties. This impact becomes more severe in the fabrication of large-sized parts during the multi-laser L-PBF process. Therefore, investigations of spatter generation and countermeasures have become more urgent. Although much research has provided insights into the melt pool, microstructure, and mechanical property, reviews of spatter in L-PBF are still limited. This work reviews the literature on the in situ detection, generation, effects, and countermeasures of spatter in L-PBF. It is expected to pave the way towards a novel generation of highly efficient and intelligent L-PBF systems.
|
|
| 4. |
- Xie, Kunpeng, 1985, et al.
(författare)
-
A reevaluation of the correlation between the synthesis parameters and structure and properties of nitrogen-doped carbon nanotubes
- 2015
-
Ingår i: Journal of Energy Chemistry. - : Elsevier BV. - 2095-4956. ; 24:4, s. 407-415
-
Tidskriftsartikel (refereegranskat)abstract
- Nitrogen-doped carbon nanotubes (NCNTs) were synthesized by chemical vapor deposition using cobalt-based oxides as catalyst and ethylenediamine (EDA) as carbon/nitrogen precursor. The influence of growth time, EDA concentration and growth temperature on the morphology, yield, composition, graphitization and oxidation resistance of the NCNTs was systematically investigated by using Raman spectroscopy, temperature-programmed oxidation and other techniques. The NCNT growth from ethylenediamine with a high N/C ratio involves several processes including mainly (1) catalytic growth of NCNTs, (2) homogeneous gas-phase decomposition of EDA, (3) non-catalytic deposition of pyrolytic carbon/nitrogen species and (4) surface etching of amorphous carbon or carbon at defect sites through gasification. At a later growth stage the etching process appears to be dominating, leading to the thinning of nanotubes and the decrease of yield. Moreover, the surface etching through carbon gasification strongly influences the structure and degree of graphitization of NCNTs.
|
|
| 5. |
- Xie, Kunpeng, 1985, et al.
(författare)
-
Co3O4–MnO2–CNT Hybrids Synthesized by HNO3 Vapor Oxidation of Catalytically Grown CNTs as OER Electrocatalysts
- 2015
-
Ingår i: ChemCatChem. - : Wiley. - 1867-3899 .- 1867-3880. ; 7:18, s. 3027-3035
-
Tidskriftsartikel (refereegranskat)abstract
- An efficient two-step gas-phase method was developed for the synthesis of Co3O4–MnO2–CNT hybrids used as electrocatalysts in the oxygen evolution reaction (OER). Spinel Co–Mn oxide was used for the catalytic growth of multiwalled carbon nanotubes (CNTs) and the amount of metal species remaining in the CNTs was adjusted by varying the growth time. Gas-phase treatment in HNO3 vapor at 200 °C was performed to 1) open the CNTs, 2) oxidize encapsulated Co nanoparticles to Co3O4 as well as MnO nanoparticles to MnO2, and 3) to create oxygen functional groups on carbon. The hybrid demonstrated excellent OER activity and stability up to 37.5 h under alkaline conditions, with longer exposure to HNO3 vapor up to 72 h beneficial for improved electrocatalytic properties. The excellent OER performance can be assigned to the high oxidation states of the oxide nanoparticles, the strong electrical coupling between these oxides and the CNTs as well as favorable surface properties rendering the hybrids a promising alternative to noble metal based OER catalysts.
|
|
| 6. |
- Xie, Kunpeng, 1985, et al.
(författare)
-
Promoting effect of nitrogen doping on carbon nanotube-supported RuO2 applied in the electrocatalytic oxygen evolution reaction
- 2016
-
Ingår i: Journal of Energy Chemistry. - : Elsevier BV. - 2095-4956. ; 25:2, s. 282-288
-
Tidskriftsartikel (refereegranskat)abstract
- RuO2 nanoparticles supported on multi-walled carbon nanotubes (CNTs) functionalized with oxygen (OCNTs) and nitrogen (NCNTs) were employed for the oxygen evolution reaction (OER) in 0.1 M KOH. The catalysts were synthesized by metal-organic chemical vapor deposition using ruthenium carbonyl (Ru3(CO)12) as Ru precursor. The obtained RuO2/OCNT and RuO2/NCNT composites were characterized using TEM, H2-TPR, XRD and XPS in order probe structure-activity correlations, particularly, the effect of the different surface functional groups on the electrochemical OER performance. The electrocatalytic activity and stability of the catalysts with mean RuO2 particle sizes of 13-14 nm was evaluated by linear sweep voltammetry, cyclic voltammetry, and chronopotentiometry, showing that the generation of nitrogen-containing functional groups on CNTs was beneficial for both OER activity and stability. In the presence of RuO2, carbon corrosion was found to be significantly less severe.
|
|
| 7. |
- Zhang, Kunpeng, et al.
(författare)
-
Predefined-time distributed multiobjective optimization for network resource allocation
- 2023
-
Ingår i: Science China Information Sciences. - : Springer Nature. - 1674-733X .- 1869-1919. ; 66:7
-
Tidskriftsartikel (refereegranskat)abstract
- We consider the multiobjective optimization problem for the resource allocation of the multiagent network, where each agent contains multiple conflicting local objective functions. The goal is to find compromise solutions minimizing all local objective functions subject to resource constraints as much as possible, i.e., the Pareto optimums. To this end, we first reformulate the multiobjective optimization problem into one single-objective distributed optimization problem by using the weighted L-p preference index, where the weighting factors of all local objective functions are obtained from the optimization procedure so that the optimizer of the latter is the desired Pareto optimum of the former. Next, we propose novel predefined-time algorithms to solve the reformulated problem by time-based generators. We show that the reformulated problem is solved within a predefined time if the local objective functions are strongly convex and smooth. Moreover, the settling time can be arbitrarily preset since it does not depend on the initial values and designed parameters. Finally, numerical simulations are presented to illustrate the effectiveness of the proposed algorithms.
|
|
