| 1. |
|
|
| 2. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 3. |
- Jin, Ying-Hui, et al.
(författare)
-
Chemoprophylaxis, diagnosis, treatments, and discharge management of COVID-19 : An evidence-based clinical practice guideline (updated version)
- 2020
-
Ingår i: Military Medical Research. - : Springer Science and Business Media LLC. - 2054-9369. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- The novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the cause of a rapidly spreading illness, coronavirus disease 2019 (COVID-19), affecting more than seventeen million people around the world. Diagnosis and treatment guidelines for clinicians caring for patients are needed. In the early stage, we have issued "A rapid advice guideline for the diagnosis and treatment of 2019 novel coronavirus (2019-nCoV) infected pneumonia (standard version)"; now there are many direct evidences emerged and may change some of previous recommendations and it is ripe for develop an evidence-based guideline. We formed a working group of clinical experts and methodologists. The steering group members proposed 29 questions that are relevant to the management of COVID-19 covering the following areas: chemoprophylaxis, diagnosis, treatments, and discharge management. We searched the literature for direct evidence on the management of COVID-19, and assessed its certainty generated recommendations using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach. Recommendations were either strong or weak, or in the form of ungraded consensus-based statement. Finally, we issued 34 statements. Among them, 6 were strong recommendations for, 14 were weak recommendations for, 3 were weak recommendations against and 11 were ungraded consensus-based statement. They covered topics of chemoprophylaxis (including agents and Traditional Chinese Medicine (TCM) agents), diagnosis (including clinical manifestations, reverse transcription-polymerase chain reaction (RT-PCR), respiratory tract specimens, IgM and IgG antibody tests, chest computed tomography, chest x-ray, and CT features of asymptomatic infections), treatments (including lopinavir-ritonavir, umifenovir, favipiravir, interferon, remdesivir, combination of antiviral drugs, hydroxychloroquine/chloroquine, interleukin-6 inhibitors, interleukin-1 inhibitors, glucocorticoid, qingfei paidu decoction, lianhua qingwen granules/capsules, convalescent plasma, lung transplantation, invasive or noninvasive ventilation, and extracorporeal membrane oxygenation (ECMO)), and discharge management (including discharge criteria and management plan in patients whose RT-PCR retesting shows SARS-CoV-2 positive after discharge). We also created two figures of these recommendations for the implementation purpose. We hope these recommendations can help support healthcare workers caring for COVID-19 patients.
|
|
| 4. |
- Jiang, Bing-Xin, et al.
(författare)
-
Fabrication and bonding of In bumps on Micro-LED with 8 μ m pixel pitch
- 2024
-
Ingår i: ENGINEERING RESEARCH EXPRESS. - 2631-8695. ; 6:2
-
Tidskriftsartikel (refereegranskat)abstract
- Indium (In) is currently used to fabricate metal bumps on micro-light-emitting diode (Micro-LED) chips due to its excellent physical properties. However, as Micro-LED pixel size and pitch decrease, achieving high-quality In bumps on densely packed Micro-LED chips often presents more challenges. This paper describes the process of fabricating In bumps on micro-LEDs using thermal evaporation, highlighting an issue where In tends to grow laterally within the photoresist pattern, ultimately blocking the pattern and resulting in undersized and poorly dense In bumps on the Micro-LED chip. To address this issue, we conducted numerous experiments to study the height variation of In bumps within a range of photoresist aperture sizes (3 mu m -7 mu m) under two different resist thickness conditions (3.8 mu m and 4.8 mu m). The results showed that the resist thickness had a certain effect on the height of In bumps on the Micro-LED chip electrodes. Moreover, we found that, with the photoresist pattern size increasing under constant resist thickness conditions, the height and quality of the bumps significantly improved. Based on this finding, we rationalized the adjustment of the photoresist pattern size within a limited emission platform range to compensate for the height difference of In bumps caused by different resist thicknesses between the cathode and anode regions. Consequently, well-shaped and dense In bumps with a maximum height of up to 4.4 mu m were fabricated on 8 mu m pitch Micro-LED chips. Afterwards, we bonded the Micro-LED chip with indium bumps to the CMOS chip, and we found that we could successfully control the CMOS chip to drive the Micro-LED chip to display specific characters through the Flexible Printed Circuit (FPC). This work is of significant importance for the fabrication of In bumps on Micro-LED chips with pitches below 10 mu m and subsequent bonding processes.
|
|
| 5. |
- Krieger, Jonas A., et al.
(författare)
-
Weyl spin-momentum locking in a chiral topological semimetal
- 2024
-
Ingår i: Nature Communications. - 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Spin-orbit coupling in noncentrosymmetric crystals leads to spin-momentum locking – a directional relationship between an electron’s spin angular momentum and its linear momentum. Isotropic orthogonal Rashba spin-momentum locking has been studied for decades, while its counterpart, isotropic parallel Weyl spin-momentum locking has remained elusive in experiments. Theory predicts that Weyl spin-momentum locking can only be realized in structurally chiral cubic crystals in the vicinity of Kramers-Weyl or multifold fermions. Here, we use spin- and angle-resolved photoemission spectroscopy to evidence Weyl spin-momentum locking of multifold fermions in the chiral topological semimetal PtGa. We find that the electron spin of the Fermi arc surface states is orthogonal to their Fermi surface contour for momenta close to the projection of the bulk multifold fermion at the Γ point, which is consistent with Weyl spin-momentum locking of the latter. The direct measurement of the bulk spin texture of the multifold fermion at the R point also displays Weyl spin-momentum locking. The discovery of Weyl spin-momentum locking may lead to energy-efficient memory devices and Josephson diodes based on chiral topological semimetals.
|
|
| 6. |
- Lu, Yu, et al.
(författare)
-
Electroless deposition of high-uniformity nickel microbumps with ultrahigh resolution of 8 μm pitch for monolithic Micro-LED display
- 2024
-
Ingår i: Materials Science in Semiconductor Processing. - 1369-8001. ; 175
-
Tidskriftsartikel (refereegranskat)abstract
- Micro-light-emitting diode (Micro-LED) displays have attracted growing attention due to their unsurpassed properties that satisfy the requirements of reality/virtual reality (AR/VR) displays. A crucial procedure of monolithic integration technology in high-density microdisplays is the interconnection process, which is intimately associated with the quality of the display device. Microfluidic electroless interconnection (MELI), an innovative low-temperature and pressure-free chip-stacking approach that eliminates the warpage-induced issues and cracking damage of the chip caused by thermo-compression bonding (TCB), holds great promise as a technology for establishing interconnections between the CMOS driver and Micro-LED. However, the requirement for the consistency of the microbump arrays and the risk of creating bridges is significantly intensified with smaller gaps in stacked chips, which restricts the application range of MELI to high-density interconnects. This paper analyzes the feasibility of further lowering the stand-off height of stacked chips in ultrafine pitch interconnects by optimizing the bump preparation process. The plasma modification time and surfactant concentration during the bump preparation process have been investigated. The result indicated that microbump arrays with a uniformity of less than 3% could be successfully manufactured by employing a 7-min plasma treatment and incorporating optimal surfactants, which catalyzes the implementation of the subsequent vertical interconnection process and eventually enhances yields of Micro-LEDs.
|
|
| 7. |
- Pan, Kui, et al.
(författare)
-
Highly effective transfer of micro-LED pixels to the intermediate and rigid substrate with weak and tunable adhesion by thiol modification
- 2023
-
Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3372 .- 2040-3364. ; 15:9, s. 4420-4428
-
Tidskriftsartikel (refereegranskat)abstract
- Based on transfer printing technology, micro-LED pixels can be transferred to different types and sizes of driving substrates to realize displays with different application scenarios. To achieve a successful transfer, GaN-based micro-LEDs first need to be separated from the original epitaxial substrate. Here, micro-LED pixels (each size 25 μm × 30 μm) on the sapphire substrate were transferred to a flexible semiconductor wafer processing (SWP) tape that is strongly sticky by conventional laser lift-off (LLO) techniques. The pixels on the SWP tape were then transferred by using a sacrificial layer of non-crosslinked oligomeric polystyrene (PS) film onto the intermediate and rigid substrate (IRS) with weak and tunable adhesion by thiol (-SH) modification. The electrode of the micro-LED is Au metal, which forms Au-S bonds with the surface of the IRS to fix the pixels. The rigid substrate helps ensure that the pixel spacing is almost unchanged during the stamp transfer process, and the weak and tunable adhesion facilitates the pixels being picked up by the stamp. The experimental results demonstrate that the pixels can be efficiently transferred to the IRS by LLO and sacrificial layer-assistance, which will provide the possibility of achieving the further transfer of pixels to different types and sizes of driving substrates by a suitable transfer stamp. The transfer process details are discussed, which can provide insights into the transfer of micro-nano devices through polymer sacrificial layers.
|
|
| 8. |
- Chen, Jun-Tong, et al.
(författare)
-
Corydalis sunhangii (Papaveraceae) : A new species from Xizang, China, based on plastome and morphological data
- 2024
-
Ingår i: Ecology and Evolution. - : John Wiley & Sons. - 2045-7758. ; 14:4
-
Tidskriftsartikel (refereegranskat)abstract
- A new species of Papaveraceae, Corydalis sunhangii, in the section Trachycarpae, is described and illustrated from Nyingchi City, Xizang, China. The new species has some resemblance to Corydalis kingdonis, but differs by radical leaves prominent, usually several, blade tripinnate (vs. insignificant, few, blade bi- to triternate); cauline leaf usually one, much smaller than radical leaves, usually situated in lower half of stem (vs. usually two, larger than radical leaves, concentrated in upper third of stem); racemes densely 13-35-flowered (vs. rather lax, 4-11-flowered); claw of lower petal shallowly saccate (vs. very prominently and deeply saccate); capsule oblong, with raised lines of dense papillae (vs. broadly obovoid, smooth). Phylogenetic analysis, based on 68 protein-coding plastid genes of 49 samples, shows that C. sunhangii is not closely related to any hitherto described species, which is consistent with our morphological analysis.
|
|
| 9. |
- Duan, Sai, et al.
(författare)
-
A density functional theory approach to mushroom-like platinum clusters on palladium-shell over Au core nanoparticles for high electrocatalytic activity
- 2011
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - Cambridge : ROYAL SOC CHEMISTRY. - 1463-9076 .- 1463-9084. ; 13:12, s. 5441-5449
-
Tidskriftsartikel (refereegranskat)abstract
- Recently, it was found that Pt clusters deposited on Pd shell over Au core nanoparticles (Au@Pd@Pt NPs) exhibit unusually high electrocatalytic activity for the electro-oxidation of formic acid (P. P. Fang, S. Duan, et al., Chem. Sci., 2011, 2, 531-539). In an attempt to offer an explanation, we used here carbon monoxide (CO) as probed molecules, and applied density functional theory (DFT) to simulate the surface Raman spectra of CO at this core-shell-cluster NPs with a two monolayer thickness of Pd shell and various Pt cluster coverage. Our DFT results show that the calculated Pt coverage dependent spectra fit the experimental ones well only if the Pt clusters adopt a mushroom-like structure, while currently the island-like structure is the widely accepted model, which follows the Volmer-Weber growth mode. This result infers that there should be a new growth mode, i.e., the mushroom growth mode as proposed in the present work, for Au@Pd@Pt NPs. We suggest that such a mushroom-like structure may offer novel active sites, which accounts for the observed high electrocatalytic activity of Au@Pd@Pt NPs.
|
|
| 10. |
- Feng, Zhuo, et al.
(författare)
-
Specialized herbivory in fossil leaves reveals convergent origins of nyctinasty
- 2023
-
Ingår i: Current Biology. - : Elsevier. - 0960-9822 .- 1879-0445. ; 33:4, s. 720-726.e2
-
Tidskriftsartikel (refereegranskat)abstract
- Plants can move in various complex ways in response to external stimuli. These mechanisms include responses to environmental triggers, such as tropic responses to light or gravity and nastic responses to humidity or contact. Nyctinasty, the movements involving circadian rhythmic folding at night and opening at daytime of plant leaves or leaflets, has attracted the attention of scientists and the public for centuries. In his canonical work entitled The Power of Movement in Plants, Charles Darwin carried out pioneering observations to document the diverse range of movements in plants. His systematic examination of plants showing ‘‘sleep [folding] movements of leaves’’ led him to conclude that the legume family (Fabaceae) includes many more nyctinastic species than all other families combined. Darwin also found that a specialized motor organ, the pulvinus, is responsible for most sleep movements of plant leaves, although differential cell division and the hydrolysis of glycosides and phyllanthurinolactone also facilitate nyctinasty in someplants. However, the origin, evolutionary history, and functional benefits of foliar sleep movements remain ambiguous owing to the lack of fossil evidence for this process. Here, we document the first fossil evidence offoliar nyctinasty based on a symmetrical style of insect feeding damage (Folifenestra symmetrica isp. nov.) in gigantopterid seed-plant leaves from the upper Permian (c. 259–252 Ma) of China. The pattern of insect damage indicates that the host leaves were attacked when mature but folded. Our finding reveals that foliar nyctinasty extends back to the late Paleozoic and evolved independently among various plant lineages.
|
|
