| 1. |
|
|
| 2. |
- Azina, Clio, et al.
(författare)
-
Deposition of MAX phase-containing thin films from a (Ti,Zr)(2)AlC compound target
- 2021
-
Ingår i: Applied Surface Science. - : Elsevier. - 0169-4332 .- 1873-5584. ; 551
-
Tidskriftsartikel (refereegranskat)abstract
- This work reports on sputter depositions carried out from a compound (Ti,Zr)(2)AlC target on Al2O3(0 0 0 1) substrates at temperatures ranging between 500 and 900 degrees C. Short deposition times yielded 30-40 nm-thick Al-containing (Ti,Zr)C films, whereas longer depositions yielded thicker films up to 90 nm which contained (Ti,Zr)C and intermetallics. At 900 degrees C, the longer depositions led to films that also consisted of solid solution MAX phases. Detailed transmission electron microscopy showed that both (Ti,Zr)(2)AlC and (Ti,Zr)(3)AlC2 solid solution MAX phases were formed. Moreover, this work discusses the growth mechanism of the thicker films, which started with the formation of the mixed (Ti,Zr)C carbide, followed by the nucleation and growth of aluminides, eventually leading to solid state diffusion of Al within the carbide, at the highest temperature (900 degrees C) to form the MAX phases.
|
|
| 3. |
- Plummer, G., et al.
(författare)
-
On the origin of kinking in layered crystalline solids
- 2021
-
Ingår i: Materials Today. - : Elsevier Science Ltd. - 1369-7021 .- 1873-4103. ; 43, s. 45-52
-
Tidskriftsartikel (refereegranskat)abstract
- Kinking is a deformation mechanism ubiquitous to layered systems, ranging from the nanometer scale in layered crystalline solids, to the kilometer scale in geological formations. Herein, we demonstrate its origins in the former through multiscale experiments and atomistic simulations. When compressively loaded parallel to their basal planes, layered crystalline solids first buckle elastically, then nucleate atomic-scale, highly stressed ripplocation boundaries - a process driven by redistributing strain from energetically expensive in-plane bonds to cheaper out-of-plane bonds. The consequences are far reaching as the unique mechanical properties of layered crystalline solids are highly dependent upon their ability to deform by kinking. Moreover, the compressive strength of numerous natural and engineered layered systems depends upon the ease of kinking or lack there of.
|
|
| 4. |
- Zhou, Jie, et al.
(författare)
-
Two-Dimensional Hydroxyl-Functionalized and Carbon-Deficient Scandium Carbide, ScCxOH, a Direct Band Gap Semiconductor
- 2019
-
Ingår i: ACS Nano. - : AMER CHEMICAL SOC. - 1936-0851 .- 1936-086X. ; 13:2, s. 1195-1203
-
Tidskriftsartikel (refereegranskat)abstract
- Two-dimensional (2D) materials have attracted intense attention in nanoscience and nanotechnology due to their outstanding properties. Among these materials, the emerging family of 2D transition metal carbides, carbonitrides, and nitrides (referred to as MXenes) stands out because of the vast available chemical space for tuning materials chemistry and surface termination, offering opportunities for property tailoring. Specifically, semiconducting properties are needed to enable utilization in optoelectronics, but direct band gaps are experimentally challenging to achieve in these 2D carbides. Here, we demonstrate the fabrication of 2D hydroxyl-functionalized and carbon-deficient scandium carbide, namely, ScCxOH, by selective etching of a layered parent ScAI(3)C(3) compound. The 2D configuration is determined as a direct band gap semiconductor, with an experimentally measured band gap approximated at 2.5 eV. Furthermore, this ScCxOH-based device exhibits excellent photoresponse in the ultraviolet-visible light region (responsivity of 0.125 A/W at 360 nm/10 V, and quantum efficiency of 43%). Thus, this 2D ScCxOH direct band gap semiconductor may find applications in visible light detectors, photocatalytic chemistry, and optoelectronic devices.
|
|
