| 1. |
- Cao, Wei, et al.
(författare)
-
Self-Assembly of Large Magnetic Nanoparticles in Ultrahigh Molecular Weight Linear Diblock Copolymer Films
- 2020
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 12:6, s. 7557-7564
-
Tidskriftsartikel (refereegranskat)abstract
- The development of diblock copolymer (DBC) nanocomposite films containing magnetic nanoparticles (NPs) with diameters (D) over 20 nm is a challenging task. To host large iron oxide NPs (Fe3O4, D = 27 +/- 0.6 nm), an ultrahigh molecular weight (UHMW) linear DBC polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) is used as a template in the present work. Due to hydrogen bonding between the carboxylic acid ligands of the NPs and the ester groups in PMMA, the NPs show an affinity to the PMMA block. The localization of the NPs inside the DBC is investigated as a function of the NP concentration. At low NP concentrations, NPs are located preferentially at the interface between PS and PMMA domains to minimize the interfacial tension caused by the strong segregation strength of the UHMW DBC. At high NP concentrations (>= 10 wt %), chain-like NP aggregates (a head-to-tail orientation) are observed in the PMMA domains, resulting in a change of the morphology from sphere to ellipsoid for part of the PMMA domains. Magnetic properties of the hybrid films are probed via superconducting quantum interference device magnetometry. All hybrid films show ferrimagnetism and are promising for potential applications in magnetic data storage.
|
|
| 2. |
- Cao, Wei, et al.
(författare)
-
Spray-Deposited Anisotropic Ferromagnetic Hybrid Polymer Films of PS-b-PMMA and Strontium Hexaferrite Magnetic Nanoplatelets
- 2021
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 13:1, s. 1592-1602
-
Tidskriftsartikel (refereegranskat)abstract
- Spray deposition is a scalable and cost-effective technique for the fabrication of magnetic hybrid films containing diblock copolymers (DBCs) and magnetic nanoparticles. However, it is challenging to obtain spray-deposited anisotropic magnetic hybrid films without using external magnetic fields. In the present work, spray deposition is applied to prepare perpendicular anisotropic magnetic hybrid films by controlling the orientation of strontium hexaferrite nanoplatelets inside ultra-high-molecular-weight DBC polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) films. During spray deposition, the evolution of DBC morphology and the orientation of magnetic nanoplatelets are monitored with in situ grazing-incidence small-angle X-ray scattering (GISAXS). For reference, a pure DBC film without nanoplatelets is deposited with the same conditions. Solvent-controlled magnetic properties of the hybrid film are proven with solvent vapor annealing (SVA) applied to the final deposited magnetic films. Obvious changes in the DBC morphology and nanoplatelet localization are observed during SVA. The superconducting quantum interference device data show that ferromagnetic hybrid polymer films with high coercivity can be achieved via spray deposition. The hybrid films show a perpendicular magnetic anisotropy before SVA, which is strongly weakened after SVA. The spray-deposited hybrid films appear highly promising for potential applications in magnetic data storage and sensors.
|
|
| 3. |
- Deng, Min, et al.
(författare)
-
Genome-wide association analyses in Han Chinese identify two new susceptibility loci for amyotrophic lateral sclerosis
- 2013
-
Ingår i: Nature Genetics. - : Nature Publishing Group. - 1061-4036 .- 1546-1718. ; 45:6, s. 697-
-
Tidskriftsartikel (refereegranskat)abstract
- To identify susceptibility genes for amyotrophic lateral sclerosis (ALS), we conducted a genome-wide association study (GWAS) in 506 individuals with sporadic ALS and 1,859 controls of Han Chinese ancestry. Ninety top SNPs suggested by the current GWAS and 6 SNPs identified by previous GWAS were analyzed in an independent cohort of 706 individuals with ALS and 1,777 controls of Han Chinese ancestry. We discovered two new susceptibility loci for ALS at 1q32 (CAMK1G, rs6703183, P-combined = 2.92 x 10(-8), odds ratio (OR) = 1.31) and 22p11 (CABIN1 and SUSD2, rs8141797, P-combined = 2.35 x 10(-9), OR = 1.52). These two loci explain 12.48% of the overall variance in disease risk in the Han Chinese population. We found no association evidence for the previously reported loci in the Han Chinese population, suggesting genetic heterogeneity of disease susceptibility for ALS between ancestry groups. Our study identifies two new susceptibility loci and suggests new pathogenic mechanisms of ALS.
|
|
| 4. |
- Fan, Qunping, 1989, et al.
(författare)
-
A Non-Conjugated Polymer Acceptor for Efficient and Thermally Stable All-Polymer Solar Cells
- 2020
-
Ingår i: Angewandte Chemie - International Edition. - : Wiley. - 1433-7851 .- 1521-3773. ; 59:45, s. 19835-19840
-
Tidskriftsartikel (refereegranskat)abstract
- A non-conjugated polymer acceptor PF1-TS4 was firstly synthesized by embedding a thioalkyl segment in the mainchain, which shows excellent photophysical properties on par with a fully conjugated polymer, with a low optical band gap of 1.58 eV and a high absorption coefficient >105 cm−1, a high LUMO level of −3.89 eV, and suitable crystallinity. Matched with the polymer donor PM6, the PF1-TS4-based all-PSC achieved a power conversion efficiency (PCE) of 8.63 %, which is ≈45 % higher than that of a device based on the small molecule acceptor counterpart IDIC16. Moreover, the PF1-TS4-based all-PSC has good thermal stability with ≈70 % of its initial PCE retained after being stored at 85 °C for 180 h, while the IDIC16-based device only retained ≈50 % of its initial PCE when stored at 85 °C for only 18 h. Our work provides a new strategy to develop efficient polymer acceptor materials by linkage of conjugated units with non-conjugated thioalkyl segments.
|
|
| 5. |
- Guo, Renjun, et al.
(författare)
-
Degradation mechanisms of perovskite solar cells under vacuum and one atmosphere of nitrogen
- 2021
-
Ingår i: Nature Energy. - : Springer Nature. - 2058-7546. ; 6:10, s. 977-
-
Tidskriftsartikel (refereegranskat)abstract
- Extensive studies have focused on improving the operational stability of perovskite solar cells, but few have surveyed the fundamental degradation mechanisms. One aspect overlooked in earlier works is the effect of the atmosphere on device performance during operation. Here we investigate the degradation mechanisms of perovskite solar cells operated under vacuum and under a nitrogen atmosphere using synchrotron radiation-based operando grazing-incidence X-ray scattering methods. Unlike the observations described in previous reports, we find that light-induced phase segregation, lattice shrinkage and morphology deformation occur under vacuum. Under nitrogen, only lattice shrinkage appears during the operation of solar cells, resulting in better device stability. The different behaviour under nitrogen is attributed to a larger energy barrier for lattice distortion and phase segregation. Finally, we find that the migration of excessive PbI2 to the interface between the perovskite and the hole transport layer degrades the performance of devices under vacuum or under nitrogen. Understanding degradation mechanisms in perovskite solar cells is key to their development. Now, Guo et al. show a greater degradation of the perovskite structure and morphology for devices operated under vacuum than under nitrogen.
|
|
| 6. |
- Jiang, Xinyu, et al.
(författare)
-
Internal nanoscale architecture and charge carrier dynamics of wide bandgap non-fullerene bulk heterojunction active layers in organic solar cells
- 2020
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 8:44, s. 23628-23636
-
Tidskriftsartikel (refereegranskat)abstract
- Bulk heterojunction (BHJ) organic solar cells have gained increasing attention in the past few years. In this work, active layers of a wide-bandgap polymer donor with benzodithiophene units PBDB-T-2F and a non-fullerene small molecule acceptor IT-M are assembled into photovoltaic devices with different amounts of solvent additive 1,8-diiodooctane (DIO). The influence of DIO on the nanoscale film morphology and crystalline structure as well as the charge carrier dynamics of the active layers are investigated by combining grazing-incidence small-angle X-ray scattering (GISAXS), grazing-incidence wide-angle X-ray scattering (GIWAXS), X-ray reflectivity (XRR), UV-visible (UV-vis) absorption spectroscopy, X-ray photoelectron spectroscopy (XPS), time-resolved photoluminescence (TRPL) and space charge limited current measurements, which are correlated with the corresponding performance of the solar cells. At 0.5 vol% DIO addition, the wide-bandgap non-fullerene organic solar cells show the best performance due to high open-circuit voltage and short-circuit current resulting from an improved charge carrier management due to the optimal inner nanoscale morphology of the active layers in terms of surface enrichment, crystallinity and crystalline orientation.
|
|
| 7. |
- Liang, Suzhe, et al.
(författare)
-
Tailoring the Optical Properties of Sputter-Deposited Gold Nanostructures on Nanostructured Titanium Dioxide Templates Based on In Situ Grazing-Incidence Small-Angle X-ray Scattering Determined Growth Laws
- 2021
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:12, s. 14283-14295
-
Tidskriftsartikel (refereegranskat)abstract
- Gold/titanium dioxide (Au/TiO2) nanohybrid materials have been widely applied in various fields because of their outstanding optical and photocatalytic performance. By state-of-the-art polymer templating, it is possible to make uniform nanostructured TiO2 layers with potentially large-scale processing methods. We use customized polymer templating to achieve TiO2 nanostructures with different morphologies. Au/TiO2 hybrid thin films are fabricated by sputter deposition. An indepth understanding of the Au morphology on the TiO2 templates is achieved with in situ grazing-incidence small-angle X-ray scattering (GISAXS) during the sputter deposition. The resulting Au nanostructure is largely influenced by the TiO2 template morphology. Based on the detailed understanding of the Au growth process, characteristic distances can be selected to achieve tailored Au nanostructures at different Au loadings. For selected sputter-deposited Au/TiO2 hybrid thin films, the optical response with a tailored localized surface plasmon resonance is demonstrated.
|
|
| 8. |
- Liang, Suzhe, et al.
(författare)
-
Template-Induced Growth of Sputter-Deposited Gold Nanoparticles on Ordered Porous TiO2 Thin Films for Surface-Enhanced Raman Scattering Sensors
- 2022
-
Ingår i: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 5:5, s. 7492-7501
-
Tidskriftsartikel (refereegranskat)abstract
- Ordered porous gold/titanium dioxide (Au/TiO2) hybrid nanostructured films are specifically interesting in large-scale applications using localized surface plasmon resonances (LSPRs) and surface-enhanced Raman scattering (SERS). Deposition of Au nanoparticles via sputter deposition is one of the promising technologies to establish optically active sites at low cost in combination with nanostructured TiO2 films. In this work, we investigate the optical response of sputter-deposited Au/TiO2 nanohybrid thin films with a focus on the plasmonic response and application as molecular sensors. The LSPR peak red shifts with an increasing thickness of deposited Au. The Raman intensity of deposited molecules, probed with rhodamine 6G (R6G), depends on the deposited gold thickness. It has its maximum at an effective Au thickness of 3.4 nm. To elucidate the origin of this behavior, we apply in situ grazing-incidence small-angle X-ray scattering (GISAXS) to investigate the growth kinetics of Au on a TiO2 template during sputter deposition. On the basis of time-resolved GISAXS, the growth characteristics of sputter-deposited Au on a TiO2 template with a final effective Au layer thickness around the percolation threshold is described with the well-known four-stage model of nucleation and cluster formation, diffusion-mediated growth, adsorption-mediated growth, and grain growth. The maximum in SERS intensity is corroborated by the existence and optimal size of hot spots in the narrow space occurring between the sputter-deposited Au clusters, on staying below the percolation threshold. On the basis of the growth laws extracted, we give a guideline for tailoring the ordered porous Au/TiO2 nanohybrid thin films for SERS sensor applications.
|
|
| 9. |
- Stanaway, Jeffrey D., et al.
(författare)
-
Global, regional, and national comparative risk assessment of 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks for 195 countries and territories, 1990-2017: A systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1923-1994
-
Tidskriftsartikel (refereegranskat)abstract
- Background The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 comparative risk assessment (CRA) is a comprehensive approach to risk factor quantification that offers a useful tool for synthesising evidence on risks and risk-outcome associations. With each annual GBD study, we update the GBD CRA to incorporate improved methods, new risks and risk-outcome pairs, and new data on risk exposure levels and risk- outcome associations. Methods We used the CRA framework developed for previous iterations of GBD to estimate levels and trends in exposure, attributable deaths, and attributable disability-adjusted life-years (DALYs), by age group, sex, year, and location for 84 behavioural, environmental and occupational, and metabolic risks or groups of risks from 1990 to 2017. This study included 476 risk-outcome pairs that met the GBD study criteria for convincing or probable evidence of causation. We extracted relative risk and exposure estimates from 46 749 randomised controlled trials, cohort studies, household surveys, census data, satellite data, and other sources. We used statistical models to pool data, adjust for bias, and incorporate covariates. Using the counterfactual scenario of theoretical minimum risk exposure level (TMREL), we estimated the portion of deaths and DALYs that could be attributed to a given risk. We explored the relationship between development and risk exposure by modelling the relationship between the Socio-demographic Index (SDI) and risk-weighted exposure prevalence and estimated expected levels of exposure and risk-attributable burden by SDI. Finally, we explored temporal changes in risk-attributable DALYs by decomposing those changes into six main component drivers of change as follows: (1) population growth; (2) changes in population age structures; (3) changes in exposure to environmental and occupational risks; (4) changes in exposure to behavioural risks; (5) changes in exposure to metabolic risks; and (6) changes due to all other factors, approximated as the risk-deleted death and DALY rates, where the risk-deleted rate is the rate that would be observed had we reduced the exposure levels to the TMREL for all risk factors included in GBD 2017.
|
|
| 10. |
- Tu, Suo, et al.
(författare)
-
Improvement of the thermoelectric properties of PEDOT:PSS films via DMSO addition and DMSO/salt post-treatment resolved from a fundamental view
- 2022
-
Ingår i: Chemical Engineering Journal. - : Elsevier BV. - 1385-8947 .- 1873-3212. ; 429
-
Tidskriftsartikel (refereegranskat)abstract
- The combination of dimethyl sulfoxide (DMSO)-solvent doping and physical-chemical DMSO/salt de-doping in a sequence has been used to improve the thermoelectric (TE) properties of poly(3,4-ethylenedioxythiophene):poly (4-styrenesulfonate) (PEDOT:PSS) films. A high power factor of ca.105.2 mu W m(-1) K-2 has been achieved for the PEDOT:PSS film after post-treatment with 10 % sodium sulfite (Na2SO3) in the DMSO/salt mixture (v/v), outperforming sodium bicarbonate (NaHCO3). The initial DMSO-doping treatment induces a distinct phase separation by facilitating the aggregation of the PEDOT molecules. At the same time, the subsequent DMSO/salt dedoping post-treatment strengthens the selective removal of the surplus non-conductive PSS chains. Substantial alterations in the oxidation level, chain conformations, PEDOT crystallites and their preferential orientation are observed upon treatment on the molecular level. At the mesoscale level, the purification and densification of PEDOT-rich domains enable the realization of inter-grain coupling by the formation of the electronically well-percolated network. Thereby, both electrical conductivity and Seebeck coefficient are optimized.
|
|
