1. |
|
|
2. |
- Cheng, Peirui, et al.
(författare)
-
Highly Efficient Ruddlesden–Popper Halide Perovskite PA2MA4Pb5I16 Solar Cells
- 2018
-
Ingår i: ACS Energy Letters. - : American Chemical Society (ACS). - 2380-8195. ; 3:8, s. 1975-1982
-
Tidskriftsartikel (refereegranskat)abstract
- Two-dimensional (2D) Ruddlesden-Popper (RP) organic-inorganic perovskites have emerged as promising candidates for solar cells with technologically relevant stability. Herein, a new RP perovskite, the fifth member («n» = 5) of the (CH3(CH2)2NH3)2(CH3NH3)n-1PbnI3n+1 family (abbreviated as PA2MA4Pb5I16), was synthesized and systematically investigated in terms of photovoltaic application. The obtained pure PA2MA4Pb5I16 crystal exhibits a direct band gap of Eg = 1.85 eV. Systematic analysis on the solid film highlights the key role of the precursor-solvent interaction in the quantum well orientation, phase purity, grain size, surface quality, and optoelectronic properties, which can be well-tuned with addition of dimethyl sulfoxide (DMSO) into the N,N-dimethylformamide (DMF) precursor solution. These findings present opportunities for designing a high-quality RP film with well-controlled quantum well orientation, micrometer-sized grains, and optoelectronic properties. As a result, we achieved power conversion efficiency (PCE) up to 10.41%.
|
|
3. |
- Jiang, Xiaoqing, et al.
(författare)
-
A solution-processable copper(II) phthalocyanine derivative as a dopant-free hole-transporting material for efficient and stable carbon counter electrode-based perovskite solar cells
- 2017
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 5:34, s. 17862-17866
-
Tidskriftsartikel (refereegranskat)abstract
- A solution-processable copper(II) phthalocyanine derivative coded as CuPc-TIPS has been synthesized and adopted as a hole-transporting material (HTM) in perovskite solar cells (PSCs), in combination with a mixed-ion perovskite absorber and a low-cost carbon cathode. Optimised PSC devices based on pristine CuPc-TIPS without any additives or dopants show a decent power conversion efficiency of 14.0% (measured at 100 mW cm(-2) illumination, AM 1.5G), together with a good long-termstability under ambient conditions. The present finding highlights the potential of solution-processed copper phthalocyanine derivative-based HTMs for the development of efficient and stable PSCs in the future.
|
|
4. |
- Jiang, Xiaoqing, et al.
(författare)
-
Efficient perovskite solar cells employing a solution-processable copper phthalocyanine as a hole-transporting material
- 2017
-
Ingår i: Science China Chemistry. - : Science in China Press. - 1674-7291 .- 1869-1870. ; 60:3, s. 423-430
-
Tidskriftsartikel (refereegranskat)abstract
- The development of alternative low-cost and high-performing hole-transporting materials (HTMs) is of great significance for the potential large-scale application of perovskite solar cells (PSCs) in the future. Here, a facilely synthesized solution-processable copper tetra-(2,4-dimethyl-3-pentoxy) phthalocyanine (CuPc-DMP) via only two simple steps, has been incorporated as a hole-transporting material (HTM) in mesoscopic perovskite solar cells (PSCs). The optimized devices based on such a HTM afford a very competitive power conversion efficiency (PCE) of up to 17.1% measured at 100 mW cm(-2) AM 1.5G irradiation, which is on par with that of the well-known 2,2',7,7'-tetrakis(N,N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) (16.7%) under equivalent conditions. This is, to the best of our knowledge, the highest value reported so far for metal organic complex-based HTMs in PSCs. The advantages of this HTM observed, such as facile synthetic procedure, superior hole transport characteristic, high photovoltaic performance together with the feasibility of tailoring the molecular structure would make solution-processable copper phthalocyanines as a class of promising HTM that can be further explored in PSCs. The present finding highlights the potential application of solution processed metal organic complexes as HTMs for cost-effective and high-performing PSCs.
|
|
5. |
- Jiang, Xiaoqing, et al.
(författare)
-
High-Performance Regular Perovskite Solar Cells Employing Low-Cost Poly(ethylenedioxythiophene) as a Hole-Transporting Material
- 2017
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- Herein, we successfully applied a facile in-situ solid-state synthesis of conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) as a HTM, directly on top of the perovskite layer, in conventional mesoscopic perovskite solar cells (PSCs) (n-i-p structure). The fabrication of the PEDOT film only involved a very simple in-situ solid-state polymerisation step from a monomer 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) made from a commercially available and cheap starting material. The ultraviolet photoelectron spectroscopy (UPS) demonstrated that the as-prepared PEDOT film possesses the highest occupied molecular orbital (HOMO) energy level of -5.5 eV, which facilitates an effective hole extraction from the perovskite absorber as confirmed by the photoluminescence measurements. Optimised PSC devices employing this polymeric HTM in combination with a low-cost vacuum-free carbon cathode (replacing the gold), show an excellent power conversion efficiency (PCE) of 17.0% measured at 100 mW cm(-2) illumination (AM 1.5G), with an open-circuit voltage (V-oc) of 1.05 V, a short-circuit current density (J(sc)) of 23.5 mA/cm(2) and a fill factor (FF) of 0.69, respectively. The present finding highlights the potential application of PEDOT made from solid-state polymerisation as a HTM for cost-effective and highly efficient PSCs.
|
|
6. |
- Lu, Yingchang, et al.
(författare)
-
New loci for body fat percentage reveal link between adiposity and cardiometabolic disease risk
- 2016
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- To increase our understanding of the genetic basis of adiposity and its links to cardiometabolic disease risk, we conducted a genome-wide association meta-analysis of body fat percentage (BF%) in up to 100,716 individuals. Twelve loci reached genome-wide significance (P<5 × 10(-8)), of which eight were previously associated with increased overall adiposity (BMI, BF%) and four (in or near COBLL1/GRB14, IGF2BP1, PLA2G6, CRTC1) were novel associations with BF%. Seven loci showed a larger effect on BF% than on BMI, suggestive of a primary association with adiposity, while five loci showed larger effects on BMI than on BF%, suggesting association with both fat and lean mass. In particular, the loci more strongly associated with BF% showed distinct cross-phenotype association signatures with a range of cardiometabolic traits revealing new insights in the link between adiposity and disease risk.
|
|
7. |
- Miao, Lingchao, et al.
(författare)
-
The anti-inflammatory potential of Portulaca oleracea L. (purslane) extract by partial suppression on NF-kappa B and MAPK activation
- 2019
-
Ingår i: Food Chemistry. - : ELSEVIER SCI LTD. - 0308-8146 .- 1873-7072. ; 290, s. 239-245
-
Tidskriftsartikel (refereegranskat)abstract
- Portulaca oleracea L. (Purslane) has great potential as food and traditional drugs in several countries. The purpose of this study was to evaluate the anti-inflammatory effects of purslane extract on lipopolysaccharide (LPS)stimulated RAW 264.7 cells. Purslane extracts significantly reduced LPS-induced synthesis of NO in a dose-dependent manner, as well as the expression levels of iNOS and COX-2. The productions of TNF-alpha and IL-6 were also significantly reduced at the higher dose of 400 mu g/ml. Meanwhile, the expression levels of P65, p-P65, p-MEK and p-I kappa B-alpha were inhibited dose-dependently. The nuclear translocation of P65 was partially prevented by the extract, which explained the inhibition of NF-kappa B pathway. In addition, three reported flavonoids, named luteolin, kaempferol and quercitrin, were identified in the extract, which might be responsible for its anti-inflammatory effects. Above all, our research has partially proved that purslane could be considered as a natural anti-inflammatory agent in further applications.
|
|
8. |
- Qu, Guangbo, et al.
(författare)
-
Identification of tetrabromobisphenol A allyl ether and tetrabromobisphenol A 2,3-dibromopropyl ether in the ambient environment near a manufacturing site and in mollusks at a coastal region
- 2013
-
Ingår i: Environmental Science and Technology. - : American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 47:9, s. 4760-4767
-
Tidskriftsartikel (refereegranskat)abstract
- Tetrabromobisphenol A (TBBPA) is one of the most widely used brominated flame retardants (BFRs) and has been frequently detected in the environment and biota. Recent studies have found that derivatives of TBBPA, such as TBBPA bis(allyl) ether (TBBPA BAE) and TBBPA bis(2,3-dibromopropyl) ether (TBBPA BDBPE) are present in various environmental compartments. In this work, using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) and liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (LC-Q-TOF-MS), TBBPA allyl ether (TBBPA AE) and TBBPA 2,3-dibromopropyl ether (TBBPA DBPE) were identified in environmental samples and further confirmed by synthesized standards. Soil, sediment, rice hull, and earthworm samples collected near a BFR manufacturing plant were found to contain these two compounds. In sediments, the concentrations of TBBPA AE and TBBPA DBPE ranged from 1.0 to 346.6 ng/g of dry weight (dw) and from 0.7 to 292.7 ng/g of dw, respectively. TBBPA AE and TBBPA DBPE in earthworm and rice hull samples were similar to soil samples, which ranged from below the method limit of detection (LOD, <0.002 ng/g of dw) to 0.064 ng/g of dw and from below the LOD (<0.008 ng/g of dw) to 0.58 ng/g of dw, respectively. Furthermore, mollusks collected from the Chinese Bohai Sea were used as a bioindicator to investigate the occurrence and distribution of these compounds in the coastal environment. The detection frequencies of TBBPA AE and TBBPA DBPE were 41 and 32%, respectively, and the concentrations ranged from below LOD (<0.003 ng/g of dw) to 0.54 ng/g of dw, with an average of 0.09 ng/g of dw, for TBBPA AE, and from below LOD (<0.008 ng/g of dw) to 1.41 ng/g of dw, with an average of 0.15 ng/g of dw, for TBBPA DBPE.
|
|
9. |
- Qu, Jishuang, et al.
(författare)
-
Improved performance and air stability of perovskite solar cells based on low-cost organic hole-transporting material X60 by incorporating its dicationic salt
- 2018
-
Ingår i: Science in China Series B. - : Science Press. - 1674-7291 .- 1869-1870. ; 61:2, s. 172-179
-
Tidskriftsartikel (refereegranskat)abstract
- The development of an efficient, stable, and low-cost hole-transporting material (HTM) is of great significance for perovskite solar cells (PSCs) from future commercialization point of view. Herein, we specifically synthesize a dicationic salt of X60 termed X60(TFSI)(2), and adopt it as an effective and stable "doping" agent to replace the previously used lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) for the low-cost organic HTM X60 in PSCs. The incorporation of this dicationic salt significantly increases the hole conductivity of X60 by two orders of magnitude from 10(-6) to 10(-4) S cm(-1). The dramatic enhancement of the conductivity leads to an impressive power conversion efficiency (PCE) of 19.0% measured at 1 sun illumination (100 mW cm(-2), AM 1.5 G), which is comparable to that of the device doped with LiTFSI (19.3%) under an identical condition. More strikingly, by replacing LiTFSI, the PSC devices incorporating X60(TFSI)(2) also show an excellent long-term durability under ambient atmosphere for 30 days, mainly due to the hydrophobic nature of the X60(TFSI)(2) doped HTM layer, which can effectively prevent the moisture destroying the perovskite layer. The present work paves the way for the development of highly efficient, stable, and low-cost HTM for potential commercialization of PSCs.
|
|
10. |
- Tao, Bairui, et al.
(författare)
-
Three-dimensional graphene nanosheets supported by NiO/Si-MCP as electrode materials for high-performance supercapacitors
- 2017
-
Ingår i: Ionics (Kiel). - : Springer Science and Business Media LLC. - 0947-7047 .- 1862-0760. ; 23:8, s. 2185-2191
-
Tidskriftsartikel (refereegranskat)abstract
- A three-dimensional (3D) graphene/NiO/Si-microchannel (MCP) composite electrode is synthesized by the conventional microelectronic machining process and electrochemical exfoliation technology for electrochemical capacitors. SEM, AFM, and Raman scattering are used to investigate the morphology and structure, and electrochemical characterization reveals that the 3D graphene/NiO/Si-MCP has a high specific capacitance of 833 Fg-1 at a current density of 5 Ag-1 in 6 mol L-1 KOH. Moreover, good cycling performance with 92% capacitance retention after 1000 cycles is observed indicating the novel electrode has large potential in high-performance supercapacitors.
|
|