1. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
2. |
- Wang, Yuchen, et al.
(författare)
-
Field observations of C2 and C3 organosulfates and insights into their formation mechanisms at a suburban site in Hong Kong
- 2023
-
Ingår i: SCIENCE OF THE TOTAL ENVIRONMENT. - 0048-9697 .- 1879-1026. ; 904
-
Tidskriftsartikel (refereegranskat)abstract
- Organosulfates (OSs) are formed from volatile organic compounds (VOCs) and their oxidation products in the presence of sulfate particles. While OSs represent an important component in secondary organic aerosol, the knowledge of their formation driving force, mechanisms, and environmental impact remain inadequately understood. In this study, we report ambient observations of C2-3 oxygenated VOCs derived OSs (C2-3 OSs) at a suburban location of Hong Kong during autumn 2016. The C2-3 OSs, including glycolaldehyde sulfate (GS), hydroxyacetone sulfate (HAS), glycolic acid sulfate (GAS), and lactic acid sulfate (LAS), were quantified/semiquantified using offline liquid chromatography-mass spectrometry analysis of aerosol filter samples. The average sum concentration of C2-3 OSs was 36 ng/m3. Correlation analysis revealed that sulfate, surface area, and liquid water content were important factors influencing C2-3 OS formation. Online measurement with an iodide High-Resolution Time-of-Flight Chemical-Ionization Mass Spectrometer (HR-ToF-CIMS) coupled with the Filter Inlet for Gases and AEROsols (FIGAERO) was also conducted to monitor C2-3 OSs, and their potential oxygenated VOC precursors in both gas-and particle-phase, and aerosol acidity tracer simultaneously. Our measurements support that glycolaldehyde/glyoxal, hydroxyacetone, glycolic acid/glyoxal, and lactic acid/ methylglyoxal are likely precursors for GS, HAS, GAS, and LAS, respectively. Additionally, we found strong correlation between C2-3 OSs and H3S2O8 , a marker for aerosol acidity, providing field observational evidence for acid-catalyzed formation of small OSs. Based on both online and offline measurements, acid-catalyzed formation mechanisms in particle/aqueous phase are proposed. Specifically, the unique structure of adjacent carbonyl and hydroxyl groups in the C2-3 oxygenated VOC precursors can facilitate the formation of (1) a five member ring intermediate via intramolecular hydrogen bond to react with sulfur trioxide through heterogenous reaction or (2) cyclic sulfate intermediate via particle-phase reaction with sulfuric acid to generate C2-3 OSs. These proposed mechanisms provide an alternative pathway for the liquid-phase production of C2-3 OSs.
|
|
3. |
- Yan, Baili, et al.
(författare)
-
Binderless zeolite NaX microspheres with enhanced CO2 adsorption selectivity
- 2019
-
Ingår i: Microporous and Mesoporous Materials. - : Elsevier. - 1387-1811 .- 1873-3093. ; 278, s. 267-274
-
Tidskriftsartikel (refereegranskat)abstract
- Zeolite NaX@NaA core-shell microspheres were prepared via a post-treatment secondary growth of zeolite NaA films on outer surface of binderless zeolite NaX microspheres. The obtained core-shell microspheres were composed of intergrown octahedral NaX particles inside, with particles size of ca. 500–750 nm, and continuous zeolite NaA films on the outer surface with the thickness of about 2 μm. Higher CO2 separation performance was observed for the core-shell microspheres comparing to the parental binderless zeolite NaX microspheres. The ideal separation factors of zeolite NaX@NaA core-shell microspheres for CO2/CH4 and CO2/N2 were 13 and 47, and the adsorption selectivities for the corresponding binary mixtures were 308 and 923, significantly higher than the binderless zeolite NaX microspheres of 9 and 19 as well as 264 and 735, respectively. After K+ ion exchanging, the core-shell zeolite microspheres have even higher adsorption selectivities of 326 and 1109 for CO2/CH4 and CO2/N2 binary mixtures. The crushing strength of the binderless zeolite NaX microspheres was increased from 0.46 MPa to 3.42 MPa after the secondary growth. In addition, the growth of zeolite A film was resultant from interzeolite conversion and the interzeolite conversion was investigated by the conversion of zeolite NaX to NaA crystals in NaA membrane synthesis gel.
|
|
4. |
- Cai, Juanjaun, et al.
(författare)
-
Preparation of carbon/cobalt composite from phenolic resin and ZIF-67 for efficient tannic acid adsorption
- 2019
-
Ingår i: Microporous and Mesoporous Materials. - : Elsevier. - 1387-1811 .- 1873-3093. ; 287, s. 9-17
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, a carbon/cobalt composite was prepared and evaluated for adsorption of ecologically harmful tannic acid (TA). The composite was prepared by simply mixing phenolic resin with ZIF-67 and following by carbonization. TEM and SEM images showed that ZIF-67 was etched by phenolic resin and cobalt nanoparticles were formed and evenly distributed in carbon. Macroporous structure was generated between the carbonized phenolic resin and ZIF-67. N2 adsorption-desorption isotherms results exhibited that the composite also had both micro- and meso-pores (average pore size of 5 nm) with a high surface area of 393 m2 g−1. Porous structure and evenly distributed cobalt nanoparticles facilitated the diffusion and adsorption of TA due to the formation of the complex between TA macromolecules and cobalt. The highest observed adsorption amount was as high as 2778 mg g−1, significantly higher than that of the carbon prepared from carbonization of phenolic resin (205 mg g−1) and ZIF-67 (1375 mg g−1). The carbon composite material is easy to recover and reuse due to the magnetic property. The reuse experiment also showed high stability of the composite. All of the results indicated a great potential of the developed carbon composite material in wastewater treatment in the industry.
|
|
5. |
- Geng, Shiyu, et al.
(författare)
-
Monolithic carbon aerogels from bioresources and their application for CO2 adsorption
- 2021
-
Ingår i: Microporous and Mesoporous Materials. - : Elsevier. - 1387-1811 .- 1873-3093. ; 323
-
Tidskriftsartikel (refereegranskat)abstract
- Monolithic binder-free CO2 adsorbents with high adsorption capacity, selectivity, adsorption-desorption kinetics, and regenerability are highly desired to both reduce the environmental impact of anthropogenic CO2 emissions and purify valuable gases from CO2. Herein, we report a strategy to prepare monolithic carbonaceous CO2 adsorbents from low-cost and underutilized bioresources, which enabled the formation of a delicate anisotropic, hierarchical porous structure. With optimized material composition and processing conditions, the biobased carbon adsorbent demonstrated a CO2 adsorption capacity of 4.49 mmol g-1 at 298 K and 100 kPa, relatively weak adsorbent-adsorbate affinity, good CO2/N2 selectivity, and advantageous hydrophobicity against water vapor. Moreover, the unique anisotropic porous structure provided high stiffness and good flexibility to the adsorbent in the axial and radial directions, respectively. We confirmed that this type of carbon adsorbent could be packed in a column for dynamic CO2 capture independent of any binders, indicating its promising future for further development toward widespread utilization.
|
|
6. |
- Gong, Jie, et al.
(författare)
-
Bacterial cellulose assisted synthesis of hierarchical pompon-like SAPO-34 for CO2 adsorption
- 2022
-
Ingår i: Microporous and Mesoporous Materials. - : Elsevier. - 1387-1811 .- 1873-3093. ; 331
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, a biosynthesis route for the preparation of hierarchical pompon-like SAPO-34 was developed. Commercially available bacterial cellulose aerogel was used as template. SiO2 loaded bacterial cellulose aerogel was used as silica source and a simple hydrothermal treatment was used for crystallization. XRD, FT-IR, SEM, TEM, N2 adsorption-desorption and TG techniques were employed to characterize the obtained samples. The hierarchical pompon-like SAPO-34 showed a spherical morphology that was comprised of nanosheets with a thickness less than 30 nm. The specific surface area of the hierarchical pompon-like SAPO-34 was 498 m2/g that was higher than the trigonal SAPO-34 crystals of 465 m2/g. The ultrasonic treatment experiment indicated a high stability of the pompon-like structure. In addition, the hierarchical pompon-like SAPO-34 exhibited a CO2 adsorption capacity of 2.26 mmol/g at 100 kPa and 298K and the corresponding CO2/CH4 ideal separation factor was 5.7, which was higher than that of trigonal SAPO-34 crystals. The saturated adsorption capacity and b-value were estimated using single site Langmuir, Toth and Sips adsorption isotherm models and the observed results were constant. Compared with trigonal SAPO-34, hierarchical pompon-like SAPO-34 displayed a higher saturated adsorption capacity, but a lower b-value.
|
|
7. |
|
|
8. |
- Hedlund, Jonas, et al.
(författare)
-
The origin of the surface barrier in nanoporous materials
- 2022
-
Ingår i: Journal of Membrane Science. - : Elsevier. - 0376-7388 .- 1873-3123. ; 641
-
Tidskriftsartikel (refereegranskat)abstract
- Surface barriers are influencing the mass transfer in nanopores, but their origin is unclear and can be quite different in different materials. For MFI and CHA membranes studied here, we show that the surface barrier may be a surface diffusion process with higher activation energy than the surface diffusion process in the pores, but other possible mechanisms such as pore blocking and pore narrowing has not been ruled out. The higher activation energy is probably a result of less interaction between adsorbed molecules at the pore mouth than inside the pores, i.e. the barrier is simply a geometrical effect in these materials. For pure components at low concentration in MFI zeolite, we found that barrier is proportional to the product of the molecular weight and heat of desorption. For MFI and CHA zeolite, we observed that the barrier is a function of concentration and approach zero at high concentration and that the barriers of the components become more similar due to interaction between the components in mixtures, which explains the high and selective mass transfer displayed by these nanoporous materials at high concentration.
|
|
9. |
- Li, Jie, et al.
(författare)
-
Preparation of hundred-micron carbon spheres using solvent extraction in a simple microchannel device
- 2022
-
Ingår i: Microporous and Mesoporous Materials. - : Elsevier. - 1387-1811 .- 1873-3093. ; 343
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon microspheres with a uniform size of about 170 μm were prepared in a simple co-flow microfluidic device using solvent extraction method. An ethanol solution of colloidal silica and phenol formaldehyde (PF) resol was used as the dispersion phase, and a mixture of hexane and diisopropylamine was used as the continuous phase. The droplets of PF resol resin/silica were generated in the continuous phase. Colloidal silica assisted the formation of the spherical structure and worked as a pore generator. The continuous phase was also used as extractant and catalyst for PF resin/silica microspheres formation. Curing, drying, carbonization and leaching were used for the post-treatment of the PF resin/silica microspheres to obtain porous carbon microspheres. The carbon microspheres displayed a narrow size distribution and a high surface area of 679 m2/g coupled with adjustable mesopores and large mesopore volume. Carbon microspheres prepared from the dispersion phase with different PF/silica ratios (denoted as carbon/silica (C/Si) ratios) were studied and the formation mechanism of the PF/silica microspheres was deeply explored.
|
|
10. |
- Li, Jie, et al.
(författare)
-
Preparation of Silica@Silica Core–Shell Microspheres Using an Aqueous Two-Phase System in a Novel Microchannel Device
- 2020
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 36:2, s. 576-584
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, a novel microchannel device was developed and used for the preparation of core–shell microspheres combining with a dextran/poly(ethylene glycol) diacrylate (DEX/PEGDA) aqueous two-phase system. Silica@silica core–shell microspheres were prepared as a model material. Silica@silica core–shell microspheres with different sizes of cores and thicknesses of shells were prepared by using different flowrate ratios of DEX/silica and PEGDA/silica aqueous solutions. The content of colloidal silica and the calcination temperature have a significant effect on the texture properties of the prepared core–shell microspheres. The surface area decreased from 199 to 177 m2/g with an increase in the colloidal silica content from 30 to 60 wt %. For a specific colloidal silica content (50 wt %), with the increase in calcination temperature from room temperature to 650 °C, the total pore volume went through a maximum of 0.7 cm3 g–1 with a surface area of 178 m2 g–1 and pore size of 7.32 nm at 450 °C. Due to the accumulation of metal nanoparticles in DEX, different metal nanoparticles (Ni and Pd) were successfully introduced into the core of the core–shell microspheres for the preparation of silica/metal nanoparticles@silica core–shell microsphere catalysts. The catalysts showed similar catalytic performance as the metal nanoparticles for hydrogenation of 4-nitrophenol with a conversion higher than 95%. However, the core–shell microsphere catalyst is much easier to recover. The reuse experiments indicated that the core–shell catalyst has high stability.
|
|