| 1. |
- Fan, Lizhou, et al.
(författare)
-
3D Core-Shell NiFeCr Catalyst on a Cu Nanoarray for Water Oxidation : Synergy between Structural and Electronic Modulation
- 2018
-
Ingår i: ACS Energy Letters. - : AMER CHEMICAL SOC. - 2380-8195. ; 3:12, s. 2865-2874
-
Tidskriftsartikel (refereegranskat)abstract
- Low cost transition metal-based electrocatalysts for water oxidation and understanding their structure-activity relationship are greatly desired for clean and sustainable chemical fuel production. Herein, a core-shell (CS) NiFeCr metal/metal hydroxide catalyst was fabricated on a 3D Cu nanoarray by a simple electrodeposition-activation method. A synergistic promotion effect between electronic structure modulation and nanostructure regulation was presented on a CS-NiFeCr oxygen evolution reaction (OER) catalyst: the 3D nanoarchitecture facilitates the mass transport process, the in situ formed interface metal/metal hydroxide heterojunction accelerates the electron transfer, and the electronic structure modulation by Cr incorporation improves the reaction kinetics. Benefiting from the synergy between structural and electronic modulation, the catalyst shows excellent activity toward water oxidation under alkaline conditions: overpotential of 200 mV at 10 mA/cm(2) current density and Tafel slope of 28 mV/dec. This work opens up a new window for understanding the structure-activity relationship of OER catalysts and encourages new strategies for development of more advanced OER catalysts.
|
|
| 2. |
- Zhang, Wei, et al.
(författare)
-
Investigation of Triphenylamine (TPA)-Based Metal Complexes and Their Application in Perovskite Solar Cells
- 2017
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 2:12, s. 9231-9240
-
Tidskriftsartikel (refereegranskat)abstract
- Triphenylamine-based metal complexes were designed and synthesized via coordination to Ni(II), Cu(II), and Zn(II) using their respective acetate salts as the starting materials. The resulting metal complexes exhibit more negative energy levels (vs vacuum) as compared to 2,2', 7,7'-tetrakis(N, N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (Spiro-OMeTAD), high hole extraction efficiency, but low hole mobilities and conductivities. Application of dopants typically used for Spiro-OMeTAD was not successful, indicating a more complicated mechanism of partial oxidation besides the redox potential. However, utilization as hole-transport material was successful, giving a highest efficiency of 11.1% under AM 1.5G solar illumination.
|
|
| 3. |
- Zhang, Wei, et al.
(författare)
-
Organic Salts as p-Type Dopants for Efficient LiTFSI-Free Perovskite Solar Cells
- 2020
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 12:30, s. 33751-33758
-
Tidskriftsartikel (refereegranskat)abstract
- Despite the ubiquity and importance of organic hole-transport materials in photovoltaic devices, their intrinsic low conductivity remains a drawback. Thus, chemical doping is an indispensable solution to this drawback and is essentially always required. The most widely used p-type dopant, FK209, is a cobalt coordination complex. By reducing Co(III) to Co(II), Spiro-OMeTAD becomes partially oxidized, and the film conductivity is initially increased. In order to further increase the conductivity, the hygroscopic co-dopant LiTFSI is typically needed. However, lithium salts are normally quite hygroscopic, and thus, water absorption has been suggested as a significant reason for perovskite degradation and therefore limited device stability. In this work, we report a LiTFSI-free doping process by applying organic salts in relatively high amounts. The film conductivity and morphology have been studied at different doping amounts. The resulting solar cell devices show comparable power conversion efficiencies to those based on conventional LiTFSI-doped Spiro-OMeTAD but show considerably better long-term device stability in an ambient atmosphere.
|
|
| 4. |
- Chen, Cheng, et al.
(författare)
-
Cu(II) Complexes as p-Type Dopants in Efficient Perovskite Solar Cells
- 2017
-
Ingår i: ACS Energy Letters. - : American Chemical Society (ACS). - 2380-8195. ; 2:2, s. 497-503
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, two Cu(II) complex compounds are designed and synthesized for applications as p-type dopants in solid-state perovskite solar cells (PSCs). Through the characterization of the optical and electrochemical properties, the complex Cu(bpcm)(2) is shown to be eligible for oxidization of the commonly used hole-transport material (HTM) SpiroOMeTAD. The reason is the electron-withdrawing effect of the chloride groups on the ligands. When the complex was applied as p-type dopant in PSCs containing Spiro-OMeTAD as HTM, an efficiency as high as 18.5% was achieved. This is the first time a Cu(II) pyridine complex has been used as p-type dopant in PSCs.
|
|
| 5. |
|
|
| 6. |
- Daniel, Quentin, et al.
(författare)
-
Water Oxidation Initiated by In Situ Dimerization of the Molecular Ru(pdc) Catalyst
- 2018
-
Ingår i: ACS Catalysis. - : AMER CHEMICAL SOC. - 2155-5435. ; 8:5, s. 4375-4382
-
Tidskriftsartikel (refereegranskat)abstract
- The mononuclear ruthenium complex [Ru(pdc)L-3] (H(2)pdc = 2,6-pyridinedicarboxylic acid, L = N-heterocycles such as 4-picoline) has previously shown promising catalytic efficiency toward water oxidation, both in homogeneous solutions and anchored on electrode surfaces. However, the detailed water oxidation mechanism catalyzed by this type of complex has remained unclear. In order to deepen understanding of this type of catalyst, in the present study, [Ru(pdc)(py)(3)] (py = pyridine) has been synthesized, and the detailed catalytic mechanism has been studied by electrochemistry, UV-vis, NMR, MS, and X-ray crystallography. Interestingly, it was found that once having reached the Ru-IV state, this complex promptly formed a stable ruthenium dimer [Ru-III(pdc)(py)(2)-O-Ru-IV(pdc)(py)(2)](+). Further investigations suggested that the present dimer, after one pyridine ligand exchange with water to form [Ru-III(pdc)(py)(2)-O-Ru-IV(pdc)(py)(H2O)](+), was the true active species to catalyze water oxidation in homogeneous solutions.
|
|
| 7. |
- Fan, Lizhou, et al.
(författare)
-
2D MnOx composite catalysts inspired by natural OEC for efficient catalyticwater oxidation
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Birnessite MnOx is a close inorganic model of natural oxygen-evolving complex (OEC) that hasbeen widely investigated for catalytic water oxidation, yet its activity is limited by the pooractive site exposure and sluggish charge transfer. Herein, starting from typical birnessite MnOx,we fabricated a hybrid of 2D manganese oxide nanosheets and pyridyl modified graphene(MnOx-NS/py-G) for electrocatalytic water oxidation. Benefiting from the synergy of structuralexfoliation, graphene substrate and molecular pyridyl modification, the MnOx-NS/py-G exhibitsabundant catalytically active sites exposure, fast electron transport, and promoted proton transferat catalyst surface, which imitates the key features of natural OEC. Consequently, theMnOx-NS/py-G reached over 600 times higher activity compared to the typical birnessite MnOx.Inspired by nature, this work provides a well-designed and effective strategy to develop highlyactive manganese oxide-based water oxidation catalysts.
|
|
| 8. |
- Fan, Lizhou, et al.
(författare)
-
Holistic functional biomimetics : a key to make an efficient electrocatalyst for water oxidation
- 2023
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 11:20, s. 10669-10676
-
Tidskriftsartikel (refereegranskat)abstract
- Water oxidation is the holy grail reaction of natural and artificial photosynthesis. How to design an efficient water-oxidation catalyst remains a long-term challenge for solar fuel production. The rate of water oxidation in photosystem II by the oxygen-evolving complex (OEC) Mn4CaO5 cluster is as high as 100-400 s−1. Mimicking the structures of the OEC is a straightforward strategy to design water-oxidation catalysts. However, the high efficiency of the OEC relies on not only its highly active site but also its holistic system for well-organized electron transfer and proton transport. Lacking such a holistic functional system makes δ-MnO2 a poor water-oxidation catalyst, although the local structure of δ-MnO2 is similar to that of the Mn4CaO5 cluster. Electrocatalysts simultaneously imitating the catalytically active sites, fast electron transfer, and promoted proton transport in a natural OEC have been rarely reported. The significance of the synergy of a holistic system is underrated in the design of water-oxidation catalysts. In this work, we fabricated holistic functional biomimetic composites of two-dimensional manganese oxide nanosheets and pyridyl-modified graphene (MnOx-NS/py-G) for electrocatalytic water oxidation. MnOx-NS/py-G simultaneously imitates the synergy of catalytically active sites, fast electron transfer, and promoted proton transport in a natural OEC, resulting in overall 600 times higher activity than that of typical δ-MnO2. This work demonstrates the significance of holistic functional biomimetic design and guides the development of highly active electrocatalysts for small molecule activation related to solar energy storage.
|
|
| 9. |
- Fan, Lizhou, et al.
(författare)
-
Molecular Functionalization of NiO Nanocatalyst for Enhanced Water Oxidation by Electronic Structure Engineering
- 2020
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 13:22, s. 5901-5909
-
Tidskriftsartikel (refereegranskat)abstract
- Tuning the local environment of nanomaterial-based catalysts has emerged as an effective approach to optimize their oxygen evolution reaction (OER) performance, yet the controlled electronic modulation around surface active sites remains a great challenge. Herein, directed electronic modulation of NiO nanoparticles was achieved by simple surface molecular modification with small organic molecules. By adjusting the electronic properties of modifying molecules, the local electronic structure was rationally tailored and a close electronic structure-activity relationship was discovered: the increasing electron-withdrawing modification readily decreased the electron density around surface Ni sites, accelerating the reaction kinetics and improving OER activity, and vice versa. Detailed investigation by operando Raman spectroelectrochemistry revealed that the electron-withdrawing modification facilitates the charge-transfer kinetics, stimulates the catalyst reconstruction, and promotes abundant high-valent gamma-NiOOH reactive species generation. The NiO-C(6)F(5)catalyst, with the optimized electronic environment, exhibited superior performance towards water oxidation. This work provides a well-designed and effective approach for heterogeneous catalyst fabrication under the molecular level.
|
|
| 10. |
- Fan, Lizhou, et al.
(författare)
-
Promoting the Fe(VI) active species generation by structural and electronic modulation of efficient iron oxide based water oxidation catalyst without Ni or Co
- 2020
-
Ingår i: Nano Energy. - : Elsevier BV. - 2211-2855 .- 2211-3282. ; 72
-
Tidskriftsartikel (refereegranskat)abstract
- Fe is considered as a promising alternative for OER catalysts owing to its high natural abundance and low cost. Due to the low conductivity and sluggish catalytic kinetics, the catalytic efficiency of Fe-rich catalysts is far from less abundant Ni, Co-rich alternatives and has been hardly improved without the involvement of Ni or Co. The lower activity of Fe-rich catalysts renders the real active center of state-of-the-art NiFe, CoFe catalyst in long-term scientific debate, despite of detection of Fe-based active intermediates in these catalysts during catalytic process. In the present work, we fabricated a series of sub-5 nm Fe1-yCryOx nanocatalysts via a simple solvothermal method, achieving systematically promoted high-valent Fe(VI) species generation by structural and electronic modulation, displaying highly active OER performance without involvement of Ni or Co. Detailed investigation revealed that the high OER activity is related to the ultrasmall nanoparticle size that promotes abundant edge- and corner-site exposure at catalyst surface, which involves in OER as highly reactive site; and the incorporated Cr ions that remarkably accelerate the charge transfer kinetics, providing an effective conduit as well as suitable host for high-valent active intermediate. This work reveals the structural prerequisites for efficient Fe-rich OER catalyst fabrication, inspiring deeper understanding of the structure-activity relationship as well as OER mechanism of Fe-based catalysts.
|
|
