| 1. |
- Kristan, Matej, et al.
(författare)
-
The Ninth Visual Object Tracking VOT2021 Challenge Results
- 2021
-
Ingår i: 2021 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW 2021). - : IEEE COMPUTER SOC. - 9781665401913 ; , s. 2711-2738
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2021 is the ninth annual tracker benchmarking activity organized by the VOT initiative. Results of 71 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in recent years. The VOT2021 challenge was composed of four sub-challenges focusing on different tracking domains: (i) VOT-ST2021 challenge focused on short-term tracking in RGB, (ii) VOT-RT2021 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2021 focused on long-term tracking, namely coping with target disappearance and reappearance and (iv) VOT-RGBD2021 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2021 dataset was refreshed, while VOT-RGBD2021 introduces a training dataset and sequestered dataset for winner identification. The source code for most of the trackers, the datasets, the evaluation kit and the results along with the source code for most trackers are publicly available at the challenge website(1).
|
|
| 2. |
- Abelev, Betty, et al.
(författare)
-
Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV
- 2013
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 719:1-3, s. 29-41
-
Tidskriftsartikel (refereegranskat)abstract
- Angular correlations between charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV for transverse momentum ranges within 0.5 < P-T,P-assoc < P-T,P-trig < 4 GeV/c. The correlations are measured over two units of pseudorapidity and full azimuthal angle in different intervals of event multiplicity, and expressed as associated yield per trigger particle. Two long-range ridge-like structures, one on the near side and one on the away side, are observed when the per-trigger yield obtained in low-multiplicity events is subtracted from the one in high-multiplicity events. The excess on the near-side is qualitatively similar to that recently reported by the CMS Collaboration, while the excess on the away-side is reported for the first time. The two-ridge structure projected onto azimuthal angle is quantified with the second and third Fourier coefficients as well as by near-side and away-side yields and widths. The yields on the near side and on the away side are equal within the uncertainties for all studied event multiplicity and p(T) bins, and the widths show no significant evolution with event multiplicity or p(T). These findings suggest that the near-side ridge is accompanied by an essentially identical away-side ridge. (c) 2013 CERN. Published by Elsevier B.V. All rights reserved.
|
|
| 3. |
- Abelev, Betty, et al.
(författare)
-
Measurement of prompt J/psi and beauty hadron production cross sections at mid-rapidity in pp collisions at root s=7 TeV
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :11
-
Tidskriftsartikel (refereegranskat)abstract
- The ALICE experiment at the LHC has studied J/psi production at mid-rapidity in pp collisions at root s = 7 TeV through its electron pair decay on a data sample corresponding to an integrated luminosity L-int = 5.6 nb(-1). The fraction of J/psi from the decay of long-lived beauty hadrons was determined for J/psi candidates with transverse momentum p(t) > 1,3 GeV/c and rapidity vertical bar y vertical bar < 0.9. The cross section for prompt J/psi mesons, i.e. directly produced J/psi and prompt decays of heavier charmonium states such as the psi(2S) and chi(c) resonances, is sigma(prompt J/psi) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 8.3 +/- 0.8(stat.) +/- 1.1 (syst.)(-1.4)(+1.5) (syst. pol.) mu b. The cross section for the production of b-hadrons decaying to J/psi with p(t) > 1.3 GeV/c and vertical bar y vertical bar < 0.9 is a sigma(J/psi <- hB) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 1.46 +/- 0.38 (stat.)(-0.32)(+0.26) (syst.) mu b. The results are compared to QCD model predictions. The shape of the p(t) and y distributions of b-quarks predicted by perturbative QCD model calculations are used to extrapolate the measured cross section to derive the b (b) over bar pair total cross section and d sigma/dy at mid-rapidity.
|
|
| 4. |
- Abelev, Betty, et al.
(författare)
-
Underlying Event measurements in pp collisions at root s=0.9 and 7 TeV with the ALICE experiment at the LHC
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :7
-
Tidskriftsartikel (refereegranskat)abstract
- We present measurements of Underlying Event observables in pp collisions at root s = 0 : 9 and 7 TeV. The analysis is performed as a function of the highest charged-particle transverse momentum p(T),L-T in the event. Different regions are defined with respect to the azimuthal direction of the leading (highest transverse momentum) track: Toward, Transverse and Away. The Toward and Away regions collect the fragmentation products of the hardest partonic interaction. The Transverse region is expected to be most sensitive to the Underlying Event activity. The study is performed with charged particles above three different p(T) thresholds: 0.15, 0.5 and 1.0 GeV/c. In the Transverse region we observe an increase in the multiplicity of a factor 2-3 between the lower and higher collision energies, depending on the track p(T) threshold considered. Data are compared to PYTHIA 6.4, PYTHIA 8.1 and PHOJET. On average, all models considered underestimate the multiplicity and summed p(T) in the Transverse region by about 10-30%.
|
|
| 5. |
- Borisenko, Oleg, et al.
(författare)
-
Bariatric Surgery can Lead to Net Cost Savings to Health Care Systems: Results from a Comprehensive European Decision Analytic Model
- 2015
-
Ingår i: Obesity Surgery. - : Springer Science and Business Media LLC. - 1708-0428 .- 0960-8923. ; 25:9, s. 1559-1568
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of the present study was to evaluate the cost-utility of bariatric surgery in a lifetime horizon from a Swedish health care payer perspective. A decision analytic model using the Markov process was developed covering cardiovascular diseases, type 2 diabetes, and surgical complications. Clinical effectiveness and safety were based on the literature and data from the Scandinavian Obesity Surgery Registry. Gastric bypass, sleeve gastrectomy, and gastric banding were included in the analysis. Cost data were obtained from Swedish sources. Bariatric surgery was cost saving in comparison with conservative management. It also led to a substantial reduction in lifetime risk of events: from a 16 % reduction in the risk of transient ischaemic attacks to a 62 % reduction in the incidence of type 2 diabetes. Over a lifetime, surgery led to savings of a,not sign8408 and generated an additional 0.8 years of life and 4.1 quality-adjusted life years (QALYs) per patient, which translates into gains of 32,390 quality-adjusted person-years and savings of a,not sign66 million for the cohort, operated in 2012. Analysis of the consequences of a 3-year delay in surgery provision showed that the overall lifetime cost of treatment may be increased in patients with diabetes or a body mass index > 40 kg/m(2). Delays in surgery may also lead to a loss of clinical benefits: up to 0.6 life years and 1.2 QALYs per patient over a lifetime. Bariatric surgery, over a lifetime horizon, may lead to significant cost savings to health care systems in addition to the known clinical benefits.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Francis, Alexander L., et al.
(författare)
-
Effects of Second Language Proficiency and Linguistic Uncertainty on Recognition of Speech in Native and Nonnative Competing Speech
- 2018
-
Ingår i: Journal of Speech, Language and Hearing Research. - : American Speech-Language-Hearing Association. - 1092-4388 .- 1558-9102. ; 61:7, s. 1815-1830
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose The purpose of this study was to investigate the effects of 2nd language proficiency and linguistic uncertainty on performance and listening effort in mixed language contexts.Method Thirteen native speakers of Dutch with varying degrees of fluency in English listened to and repeated sentences produced in both Dutch and English and presented in the presence of single-talker competing speech in both Dutch and English. Target and masker language combinations were presented in both blocked and mixed (unpredictable) conditions. In the blocked condition, in each block of trials the target–masker language combination remained constant, and the listeners were informed of both prior to beginning the block. In the mixed condition, target and masker language varied randomly from trial to trial. All listeners participated in all conditions. Performance was assessed in terms of speech reception thresholds, whereas listening effort was quantified in terms of pupil dilation.Results Performance (speech reception thresholds) and listening effort (pupil dilation) were both affected by 2nd language proficiency (English test score) and target and masker language: Performance was better in blocked as compared to mixed conditions, with Dutch as compared to English targets, and with English as compared to Dutch maskers. English proficiency was correlated with listening performance. Listeners also exhibited greater peak pupil dilation in mixed as compared to blocked conditions for trials with Dutch maskers, whereas pupil dilation during preparation for speaking was higher for English targets as compared to Dutch ones in almost all conditions.Conclusions Both listener's proficiency in a 2nd language and uncertainty about the target language on a given trial play a significant role in how bilingual listeners attend to speech in the presence of competing speech in different languages, but precise effects also depend on which language is serving as target and which as masker.
|
|
| 9. |
- Hu, Wei, et al.
(författare)
-
Silencing DTX3L Inhibits the Progression of Cervical Carcinoma by Regulating PI3K/AKT/mTOR Signaling Pathway
- 2023
-
Ingår i: International Journal of Molecular Sciences. - : MDPI. - 1661-6596 .- 1422-0067. ; 24:1
-
Tidskriftsartikel (refereegranskat)abstract
- Cervical carcinoma (CC) is the second most prevalent gynecologic cancer in females across the world. To obtain a better understanding of the mechanisms underlying the development of CC, high-resolution label-free mass spectrometry was performed on CC and adjacent normal tissues from eight patients. A total of 2631 proteins were identified, and 46 significant differently expressed proteins (DEPs) were found between CC and normal tissues (p < 0.01, fold change >10 or <0.1). Ingenuity pathway analysis revealed that the majority of the proteins were involved in the regulation of eIF4 and p70S6K signaling and mTOR signaling. Among 46 DEPs, Integrin beta 6 (ITGB6), PPP1CB, TMPO, PTGES3 (P23) and DTX3L were significantly upregulated, while Desmin (DES) was significantly downregulated in CC tissues compared with the adjacent normal tissues. In in vivo and in vitro experiments, DTX3L knockdown suppressed CC cell proliferation, migration, invasion and xenograft tumorigenesis, and enhanced cell apoptosis. Combination of silencing DTX3L and cisplatin treatment induced higher apoptosis percentage compared to cisplatin treatment alone. Moreover, DTX3L silencing inhibited the PI3K/AKT/mTOR signal pathway. Thus, our results suggested DTX3L could regulate CC progression through the PI3K/AKT/mTOR signal pathway and is potentially a novel biomarker and therapeutic target for CC.
|
|
| 10. |
- Li, Rongrong, et al.
(författare)
-
Prediction of cutting force during gypsum fiber composite milling process using response surface methodology
- 2017
-
Ingår i: Wood and Fiber Science. - : Society of Wood Science and Technology. - 0735-6161. ; 49:4, s. 453-460
-
Tidskriftsartikel (refereegranskat)abstract
- Gypsum fiber composite (GFC) is a kind of building material widely used in interior decoration. Milling is the most commonly used machining process for GFC. Cutting force as an important cutting characteristic parameter has significant influence on the quality of machined surface, power consumption, and tools wear. The tangential force (Fx) and normal force (Fy) were measured and analyzed to find out the effects of milling parameters on these cutting forces. Milling parameters considered were spindle speed, feed rate, and depth of cut. The response surface methodology (RSM) was selected to develop mathematical models and optimize milling parameters. The results showed that with the increase of feed rate and depth of cut, the Fx and Fy increased. But the cutting forces decreased with the increase of spindle speed. The optimization results indicated that high spindle speed, low feed rate, and small depth of cut are preferable for milling of GFC to obtain the best result.
|
|
