| 1. |
- Yang, Fei, et al.
(författare)
-
Efficient and Spectrally Stable Blue Perovskite Light-Emitting Diodes Based on Potassium Passivated Nanocrystals
- 2020
-
Ingår i: Advanced Functional Materials. - : WILEY-V C H VERLAG GMBH. - 1616-301X .- 1616-3028. ; 30:10
-
Tidskriftsartikel (refereegranskat)abstract
- Metal halide perovskites have aroused tremendous interest in the past several years for their promising applications in display and lighting. However, the development of blue perovskite light-emitting diodes (PeLEDs) still lags far behind that of their green and red cousins due to the difficulty in obtaining high-quality blue perovskite emissive layers. In this study, a simple approach is conceived to improve the emission and electrical properties of blue perovskites. By introducing an alkali metal ion to occupy some sites of peripheral suspended organic ligands, the nonradiative recombination is suppressed, and, consequently, blue CsPb(Br/Cl)(3) nanocrystals with a high photoluminescence quantum efficiency of 38.4% are obtained. The introduced K+ acts as a new type of metal ligand, which not only suppresses nonradiative pathways but also improves the charge carrier transport of the perovskite nanocrystals. With further engineering of the device structure to balance the charge injection rate, a spectrally stable and efficient blue PeLED with a maximum external quantum efficiency of 1.96% at the emission peak of 477 nm is fabricated.
|
|
| 2. |
- Li, Chunyan, et al.
(författare)
-
Pathways related to mitochondrial dysfunction in cartilage of endemic osteoarthritis patients in China
- 2012
-
Ingår i: Science China Life Sciences. - : Springer Science+Business Media B.V.. - 1674-7305 .- 1869-1889. ; 55:12, s. 1057-1063
-
Tidskriftsartikel (refereegranskat)abstract
- n this paper, we present the first evidence of differences in the mitochondria-related gene expression profiles of adult articular cartilage derived from patients with Kashin-Beck disease and normal controls. The expression of 705 mitochondria-related genes was analyzed by mitochondria-related gene expression analysis and ingenuity pathways analysis. Mitochondria-related gene expression analysis identified 9 up-regulated genes in Kashin-Beck disease based on their average expression ratio. Three canonical pathways involved in oxidative phosphorylation, apoptosis signaling and pyruvate metabolism were identified, which indicate the involvement of mitochondrial dysfunction in the pathogenesis of Kashin-Beck disease.
|
|
| 3. |
- Fan, Xu, et al.
(författare)
-
Effects of different supplementary cementitious materials on the performance and environment of eco-friendly mortar prepared from waste incineration bottom ash
- 2022
-
Ingår i: Construction and Building Materials. - : Elsevier BV. - 0950-0618. ; 356
-
Tidskriftsartikel (refereegranskat)abstract
- Municipal solid waste incineration bottom ash (MSWIBA) is a by-product produced by municipal waste incineration treatment. In this study, MSWIBA particle size distribution, chemical composition and particle shape were investigated and confirmed its value for reuse in the construction field and its good research potential. MSWIBA was used as fine aggregates, while coal fly ash (FA) and ground granulated blast furnace slag (GGBFS) were used as auxiliary cementitious materials to replace part of cement to manufacture the eco-friendly mortar (EFM). The effect of FA/GGBFS on the mechanical and microscopic properties of EFM with different material ratios was mainly investigated. And the analysis of the environmental friendliness and economy of this EFM was made. The results show that the combination of FA and GGBFS at the same time reduces the early mechanical properties of the mortar. However, the strength developed rapidly after 7 days, with an increase of more than 6 times the rate before 7 days. Compared with GGBFS, FA is more helpful in improving the mechanical properties of the EFM. After 28 days of full hydration, the hydration products within the EFM are numerous and well bonded to each other. Not only do these hydration products increase the mechanical strength of EFM, but they also successfully solidify the hazardous components in MSWIBA and reduce their negative environmental effects. In addition, the use of MSWIBA instead of sand for mortar preparation reduces energy consumption and CO2 emissions, and it reduces the cost by more than 50 %. This indicates that MSWIBA may perform well in the future development of the civil infrastructures. As well as recycling waste resources, it makes a valuable contribution to the development of green and sustainable building materials.
|
|
| 4. |
- Fan, Xu, et al.
(författare)
-
New applications of municipal solid waste incineration bottom ash (MSWIBA) and calcined clay in construction: Preparation and use of an eco-friendly artificial aggregate
- 2023
-
Ingår i: Construction and Building Materials. - 0950-0618. ; 387
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study is to prepare MSWIBA as eco-friendly artificial aggregates (EFAAs) by cold bond granulation technique using a low carbon limestone calcined clay cement (LC3). The water absorption rate of EFAAs is between 14.42 and 21.82%, and the maximum compressive strength can reach 2.5 MPa. Calcined clay particles can effectively adsorb heavy metal ions after absorbing water, and EFAAs can reduce the leaching value of toxic elements in MSWIBA by more than half on average. Compared to standard OPC cementitious materials, LC3 composites only need 50% of the energy and discharge 43% of the CO2, producing a more environmentally friendly artificial aggregate. In addition, the 28-day compressive strength of concrete was higher than 30 MPa on average after applying EFAAs to concrete. The good application capability shown by EFAAs, as well as their low energy consumption and low carbon environmental characteristics, promote the better application of MSWIBA in buildings.
|
|
| 5. |
- Han, Jing, et al.
(författare)
-
The expression of p-ATF2 involved in the chondeocytes apoptosis of an endemic osteoarthritis, Kashin-Beck disease
- 2013
-
Ingår i: BMC Musculoskeletal Disorders. - : BioMed Central. - 1471-2474. ; 14
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: The purpose of the study was to understand the function and expression of ATF2 by JNK and p38 signal pathways in the chondrocytes apoptosis of articular cartilage of the Kashin-Beck disease (KBD).METHODS: The changes of ATF2, JNK and p38 mRNAs and proteins were investigated between cartilage and chondrocyte as well as KBD and normal. JNK and p38 inhibitors were used as treatments to prevent apoptosis in chondrocytes from KBD patients.RESULTS: It was found that the protein levels of p-p38, p-JNK, ATF2 and p-ATF2 increased in KBD human cartilage which is in line with the higher mRNA levels of p38, JNK and ATF2 as compared both with normal cartilage and KBD chondrocytes. In addition, p-ATF2 was only detected in KBD cartilage. Furthermore, JNK inhibitor was more effective than p38 inhibitor in preventing chondrocyte apoptosis at equal concentrations of 10 μM.CONCLUSION: These findings indicated the expression of p-ATF2 by JNK and p38 signal pathways involved in the chondrocyte apoptosis in cartilage with KBD.
|
|
| 6. |
- Jin, Hesong, et al.
(författare)
-
An experimental study on the influence of continuous ambient humidity conditions on relative humidity changes, chloride diffusion and microstructure in concrete
- 2022
-
Ingår i: Journal of Building Engineering. - : Elsevier BV. - 2352-7102. ; 59
-
Tidskriftsartikel (refereegranskat)abstract
- Most engineering structures are exposed to various harsh environments, such as temperature fluctuations and humidity cycles, simultaneously. Additionally, moisture transfer and corrosive ion transport in concrete are driven by humidity gradients. Therefore, studying Chloride transport in concrete under constant humidity conditions is a meaningful research project. In this work, a new experimental setup was designed, and the Chloride diffusion behavior of concrete under a continuous humidity environment and NaCl immersion was investigated. Meanwhile, to accurately evaluate the internal humidity of concrete, humidity sensors were applied to the concrete. Additionally, the impacts of the water-binder ratio (w/b) and ambient humidity on the humidity diffusion coefficient, free Chloride content and bound Chloride content in concrete were evaluated. The microstructure was characterized by scanning electron microscopy, X-ray diffraction and mercury intrusion porosimetry. The results show that the content of free Chloride increases with an increasing w/b ratio. The humidity diffusion coefficient of concrete during water absorption (continuous high humidity environment) is significantly higher than that during water loss (continuous dry environment). Furthermore, under the drying condition, the Chloride content and the humidity diffusion coefficient on the concrete surface gradually increased, while during the wetting procedure, the Chloride content inside the concrete increased, and the humidity diffusion coefficient gradually decreased. However, the bound Chloride content inside the concrete is not affected by the humidity level in the environment. In the wetting environment, the calcium hydroxide in the matrix is gradually consumed, and the Chloride diffuses to the matrix to form more Friedel's salt and calcium carbonate. Moreover, lowering the w/b ratio or increasing the ambient humidity can enhance the formation of more hydrated compounds (C–S–H gel), which can reduce the total porosity and can also improve the ability of concrete to resist Chloride diffusion. Overall, this study provides a better understanding of and insight into the design and maintenance of seaside RC infrastructures.
|
|
| 7. |
- Jin, Hesong, et al.
(författare)
-
Iodide and chloride ions diffusivity, pore characterization and microstructures of concrete incorporating ground granulated blast furnace slag
- 2022
-
Ingår i: Journal of Materials Research and Technology. - : Elsevier BV. - 2238-7854 .- 2214-0697. ; 16, s. 302-321
-
Tidskriftsartikel (refereegranskat)abstract
- Innovative approaches are under research to study the resistance of chloride ion penetration in concrete containing chloride ions, to minimize the impact of chloride ion penetration test errors in coastal reinforced concrete (RC), which is helpful to the design of coastal RC structures. In this study, the diffusion depth, free ion concentration and diffusion coefficient of chloride, iodide ions with different curing ages and GGBFS content were measured by the Rapid Chloride Migration Test (RCM) and Rapid Iodide Migration tests (RIM). The SEM-EDS and MIP were used to analyze the microstructures, pore size distribution and the hydrated products. The results show that the performance of GGBFS concrete against the diffusion of corrosive ions is affected by the curing age and the content of GGBFS. With the increase of GGBFS content, especially concrete with 60% GGBFS, the influence of chloride, iodide ion penetrating into concrete gradually becomes smaller. The long-age curing system is more conducive to the concrete resistance to the migration and diffusion of chloride, iodine ions. Compared with the ordinary concrete, the total porosity of concrete mixed with GGBFS is lower, the internal microstructures have fewer cracks and defects, the density is better, and the diffusion coefficient of chloride and iodide ions is also lower. In addition, using the concept of corrosive ion adjustment coefficient (conversion coefficient of diffusion between chloride ion and iodide ion) and applying the data regression analysis (DRA), it is found that there is a good quadratic parabolic function relationship between the GGBFS content and the ions adjustment coefficient.
|
|
| 8. |
- Li, Zhenlin, et al.
(författare)
-
Research on the durability and Sustainability of an artificial lightweight aggregate concrete made from municipal solid waste incinerator bottom ash (MSWIBA)
- 2023
-
Ingår i: Construction and Building Materials. - : Elsevier BV. - 0950-0618. ; 365
-
Tidskriftsartikel (refereegranskat)abstract
- This study chooses to use three common cementing materials, Portland cement (OPC), ground granulated blast furnace slag (GGBFS) and fly ash (FA), as the binder for the production of three artificial lightweight coarse aggregates (ALCAs) through cold bonding with municipal solid waste incineration bottom ash (MSWIBA) in which MSWIBA accounts for 70% of the total content by volume. In this study, three ALCAs were used to replace 0%, 30%, 60%, and 100% of natural aggregates used in the production of concrete. Through capillary water absorption and rapid migration of chloride ions, the effect of the replacement amount of ALCAs on the durability of concrete was explored. Additionally, in accordance with the Material Sustainability Index (MSI), a statistical analysis of the CO2 emissions, energy consumption and cost of the concrete made of the three ALCAs was carried out. Studies have shown that ALCAs can improve the Interfacial Transition Zone (ITZ) and pore structure of concrete, thereby improving the ability of concrete to resist chloride ion penetration. In addition, the use of ALCAs can reduce the cost of concrete. Among the ALCAs used in this study, those which use GGBFS and FA as adhesives (without OPC) can improve the durability of concrete the most and reduce CO2 emissions.
|
|
| 9. |
- Liu, Bokai, et al.
(författare)
-
Multiscale modeling of thermal properties in Polyurethane incorporated with phase change materials composites : a case study
- 2023
-
Ingår i: Healthy buildings Europe 2023. - Red Hook, NY : Curran Associates, Inc.. - 9781713877158 ; , s. 923-929
-
Konferensbidrag (refereegranskat)abstract
- Polyurethane (PU) is an ideal thermal insulation material due to its excellent thermal properties. The incorporation of Phase Change Materials (PCMs) capsules into Polyurethane (PU) has been shown to be effective in building envelopes. This design can significantly increase the stability of the indoor thermal environment and reduce the fluctuation of indoor air temperature. We develop a multiscale model of a PU-PCM foam composite and study the thermal conductivity of this material. Later, the design of materials can be optimized by obtaining thermal conductivity. We conduct a case study based on the performance of this optimized material to fully consider the thermal comfort of the occupants of a building envelope with the application of PU-PCMs composites in a single room. At the same time, we also predict the energy consumption of this case. All the outcomes show that this design is promising, enabling the passive design of building energy and significantly improving occupants' comfort.
|
|
| 10. |
- Liu, Jun, et al.
(författare)
-
Application potential analysis of biochar as a carbon capture material in cementitious composites: A review
- 2022
-
Ingår i: Construction and Building Materials. - : Elsevier BV. - 0950-0618. ; 350
-
Forskningsöversikt (refereegranskat)abstract
- In recent years, emissions of carbon dioxide in the atmosphere have been increasing, leading to increasingly severe global warming. In the construction industry, the increase in cement production is one of the main sources of CO2 emissions. Cementitious composites can sequester CO2 in calcium carbonate precipitates through carbonation reactions, but their carbon sequestration efficiency is very low due to the slow diffusion rate of CO2 in the cement matrix. To reduce the net CO2 emissions during concrete production, a feasible option is to enhance its carbon capture performance through accelerated carbonation curing (ACC) and CO2 capture and storage (CCS) technologies. Biochar has a strong adsorption capacity for CO2, its production process is green and low-carbon, and its production cost is low, which has high economic benefits. Many studies have applied biochar as cementitious composites in the construction industry to improve the mechanical properties, durability and functionality of cementitious composites. Additionally, biochar is a potential carbon capture material that can effectively improve the carbon sequestration performance of cementitious composites. In this review, the latest research progress of biochar in cementitious composites in recent years is reviewed, and the mechanical properties, durability and carbon sequestration performance of biochar-cementitious composites were analyzed. Additionally, the mechanism of the synergistic effect of biochar and the carbonization reaction in concrete and the effect on the carbon capture ability of cementitious composites were also investigated.
|
|
