| 1. |
- Tang, Weidong, et al.
(författare)
-
The roles of metal oxidation states in perovskite semiconductors
- 2023
-
Ingår i: Matter. - : CELL PRESS. - 2590-2393 .- 2590-2385. ; 6:11, s. 3782-3802
-
Forskningsöversikt (refereegranskat)abstract
- Metal halide perovskites are an emerging materials platform for optoelectronic, spintronic, and thermoelectric applications. The field of perovskite materials and devices has progressed rapidly over the past decade. For halide perovskite materials, a range of physical and chemical properties such as crystal structure, bandgap, charge carrier density, and stability that govern the device functionalities are critically determined by the oxidation states of the B-site metal ions. However, such an important mechanistic connection unique to halide perovskites is not well established, limiting the pace of development in this area. In this review, we identify the roles of metal oxidation states in perovskite semiconductors. The redox reactions leading to these states, and their effects on the materials properties, are clarified. Finally, we suggest routes to improving device efficiency and stability from the perspective of oxidation state control.
|
|
| 2. |
- Zhang, Lixiu, et al.
(författare)
-
Advances in the Application of Perovskite Materials
- 2023
-
Ingår i: NANO-MICRO LETTERS. - : SHANGHAI JIAO TONG UNIV PRESS. - 2311-6706. ; 15:1
-
Forskningsöversikt (refereegranskat)abstract
- Nowadays, the soar of photovoltaic performance of perovskite solar cells has set off a fever in the study of metal halide perovskite materials. The excellent optoelectronic properties and defect tolerance feature allow metal halide perovskite to be employed in a wide variety of applications. This article provides a holistic review over the current progress and future prospects of metal halide perovskite materials in representative promising applications, including traditional optoelectronic devices (solar cells, light-emitting diodes, photodetectors, lasers), and cutting-edge technologies in terms of neuromorphic devices (artificial synapses and memristors) and pressure-induced emission. This review highlights the fundamentals, the current progress and the remaining challenges for each application, aiming to provide a comprehensive overview of the development status and a navigation of future research for metal halide perovskite materials and devices.
|
|
| 3. |
- Zhao, Baodan, et al.
(författare)
-
High-efficiency perovskite-polymer bulk heterostructure light-emitting diodes
- 2018
-
Ingår i: Nature Photonics. - : NATURE PUBLISHING GROUP. - 1749-4885 .- 1749-4893. ; 12:12, s. 783-
-
Tidskriftsartikel (refereegranskat)abstract
- Perovskite-based optoelectronic devices are gaining much attention owing to their remarkable performance and low processing cost, particularly for solar cells. However, for perovskite light-emitting diodes, non-radiative charge recombination has limited the electroluminescence efficiency. Here we demonstrate perovskite-polymer bulk heterostructure light-emitting diodes exhibiting external quantum efficiencies of up to 20.1% (at current densities of 0.1-1 mA cm(-2)). The light-emitting diode emissive layer comprises quasi-two-dimensional and three-dimensional (2D/3D) perovskites and an insulating polymer. Photogenerated excitations migrate from quasi-2D to lower-energy sites within 1 ps, followed by radiative bimolecular recombination in the 3D regions. From near-unity external photoluminescence quantum efficiencies and transient kinetics of the emissive layer with and without charge-transport contacts, we find non-radiative recombination pathways to be effectively eliminated, consistent with optical models giving near 100% internal quantum efficiencies. Although the device brightness and stability (T-50 = 46 h in air at peak external quantum efficiency) require further improvement, our results indicate the significant potential of perovskite-based photon sources.
|
|
| 4. |
- Zhao, Baodan, et al.
(författare)
-
High Open-Circuit Voltages in Tin-Rich Low-Bandgap Perovskite-Based Planar Heterojunction Photovoltaics
- 2017
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 29
-
Tidskriftsartikel (refereegranskat)abstract
- Low-bandgap CH3NH3(PbxSn1–x)I3 (0 ≤ x ≤ 1) hybrid perovskites (e.g., ≈1.5–1.1 eV) demonstrating high surface coverage and superior optoelectronic properties are fabricated. State-of-the-art photovoltaic (PV) performance is reported with power conversion efficiencies approaching 10% in planar heterojunction architecture with small (<450 meV) energy loss compared to the bandgap and high (>100 cm2 V−1s−1) intrinsic carrier mobilities.
|
|
| 5. |
- Zhao, Baodan, et al.
(författare)
-
Light management for perovskite light-emitting diodes
- 2023
-
Ingår i: Nature Nanotechnology. - : NATURE PORTFOLIO. - 1748-3387 .- 1748-3395. ; 18:9, s. 981-992
-
Forskningsöversikt (refereegranskat)abstract
- Perovskite light-emitting diodes (LEDs) have reached external quantum efficiencies of over 20% for various colours, showing great potential for display and lighting applications. Despite the internal quantum efficiencies of the best-performing devices already approaching unity, around 80% of the internally generated photons are trapped in the devices and lose energy through a variety of lossy channels. Significant opportunities for improving efficiency and maximizing photon extraction lie in the effective management of light. In this Review we analyse light management strategies based on the intrinsic optical properties of the perovskite materials and the extrinsic properties related to device structures. These approaches should allow the external quantum efficiencies of perovskite LEDs to substantially exceed the conventional limits of planar organic LED devices. By revisiting lessons learned from organic LEDs and perovskite solar cells, we highlight possible directions of future research towards perovskite LEDs with ultrahigh efficiencies. This Review analyses the mechanisms of light extraction from perovskite light-emitting diodes and suggests new approaches towards ultrahigh electroluminescence efficiencies.
|
|
