| 1. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 2. |
- Kristan, Matej, et al.
(författare)
-
The Sixth Visual Object Tracking VOT2018 Challenge Results
- 2019
-
Ingår i: Computer Vision – ECCV 2018 Workshops. - Cham : Springer Publishing Company. - 9783030110086 - 9783030110093 ; , s. 3-53
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2018 is the sixth annual tracker benchmarking activity organized by the VOT initiative. Results of over eighty trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis and a “real-time” experiment simulating a situation where a tracker processes images as if provided by a continuously running sensor. A long-term tracking subchallenge has been introduced to the set of standard VOT sub-challenges. The new subchallenge focuses on long-term tracking properties, namely coping with target disappearance and reappearance. A new dataset has been compiled and a performance evaluation methodology that focuses on long-term tracking capabilities has been adopted. The VOT toolkit has been updated to support both standard short-term and the new long-term tracking subchallenges. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website (http://votchallenge.net).
|
|
| 3. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2015 challenge results
- 2015
-
Ingår i: Proceedings 2015 IEEE International Conference on Computer Vision Workshops ICCVW 2015. - : IEEE. - 9780769557205 ; , s. 564-586
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge 2015, VOT2015, aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 62 trackers are presented. The number of tested trackers makes VOT 2015 the largest benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the appendix. Features of the VOT2015 challenge that go beyond its VOT2014 predecessor are: (i) a new VOT2015 dataset twice as large as in VOT2014 with full annotation of targets by rotated bounding boxes and per-frame attribute, (ii) extensions of the VOT2014 evaluation methodology by introduction of a new performance measure. The dataset, the evaluation kit as well as the results are publicly available at the challenge website(1).
|
|
| 4. |
- Shen, Minhao, et al.
(författare)
-
Effects of exposure time and printing angle on the curing characteristics and flexural strength of ceramic samples fabricated via digital light processing
- 2020
-
Ingår i: Ceramics International. - : Elsevier. - 0272-8842 .- 1873-3956. ; 46:15, s. 24379-24384
-
Tidskriftsartikel (refereegranskat)abstract
- The development of photosensitive slurries for additive manufacturing has attracted great interest due to their correlation with the final properties of the fabricated parts. This paper focus on the printing quality control in digital light processing (DLP) 3D printing of advanced ceramics. Systematic experiments were performed to assess the effects of the exposure time and printing angle on the three-point bending strength of the fabricated samples. The exposure time affected the bending strength of the printed zirconia ceramic dramatically. When the weak exposure time is 1 s and the strong exposure time is 13 s, the average bending strength can reach 580 MPa while Weibull modulus can reach 8.84. Meanwhile, the printing angle also affected the bending strength mechanical sample printed at 45 degrees exhibits the worst performance.
|
|
| 5. |
- Zhao, Juzhi, et al.
(författare)
-
A novel 4D cell culture mimicking stomach peristalsis altered gastric cancer spheroids growth and malignance
- 2021
-
Ingår i: Biofabrication. - : IOP Publishing. - 1758-5082 .- 1758-5090. ; 13:3
-
Tidskriftsartikel (refereegranskat)abstract
- In vitro cancer models that can largely mimic the in vivo microenvironment are crucial for conducting more accurate research. Models of three-dimensional (3D) culture that can mimic some aspects of cancer microenvironment or cancer biopsies that can adequately represent tumor heterogeneity are intensely used currently. Those models still lack the dynamic stress stimuli in gastric carcinoma exposed to stomach peristalsis in vivo. This study leveraged a lab-developed four-dimensional (4D) culture model by a magnetic responsive alginate-based hydrogel to rotating magnets that can mimic stress stimuli in gastric cancer (GC). We used the 4D model to culture human GC cell line AGS and SGC7901, cells at the primary and metastasis stage. We revealed the 4D model altered the cancer cell growth kinetics mechanistically by altering PCNA and p53 expression compared to the 3D culture that lacks stress stimuli. We found the 4D model altered the cancer spheroids stemness as evidenced by enhanced cancer stem cells (CD44) marker expression in AGS spheroids but the expression was dampened in SGC7901 cells. We examined the multi-drug resistance (MDR1) marker expression and found the 4D model dampened the MDR1 expression in SGC7901 cell spheroids, but not in spheroids of AGS cells. Such a model provides the stomach peristalsis mimic and is promising for conducting basic or translational GC-associated research, drug screening, and culturing patient gastric biopsies to tailor the therapeutic strategies in precision medicine.
|
|
| 6. |
- Zhao, Weiming, et al.
(författare)
-
Mechanical properties of zirconia octet truss structures fabricated by DLP 3D printing
- 2020
-
Ingår i: Materials Research Express. - : IOP PUBLISHING LTD. - 2053-1591. ; 7:8
-
Tidskriftsartikel (refereegranskat)abstract
- Zirconia ceramic octet-truss structures with various strut size and unit cell numbers were successfully fabricated through a DLP-based 3D printing method. The mechanical properties and energy absorption capacity under compressive load were investigated systematically. The sides of all cubes are 10 mm, the strut size was changed from 0.25 mm to 2 mm, cells number was in the range of 1(1 x 1 x 1)-125(5 x 5 x 5). It has been seen that the relative density, compressive strength and energy absorption increases with the increase of strut size when cell numbers remain the same. It can be concluded that the strength and energy absorption were affected by the relative density, strut size and the stacking mode of the unit cells. So far, with this study, a high compressive strength of 75.3 MPa and a reasonably good energy absorption of 6.76 x 10(5)J m(-3)can be achieved at a relative density of 48.57%.
|
|
| 7. |
- Chen, Yue, et al.
(författare)
-
A novel nanoparticle system targeting damaged mitochondria for the treatment of Parkinson's disease
- 2022
-
Ingår i: Biomaterials Advances. - : Elsevier BV. - 2772-9516 .- 2772-9508. ; 138
-
Tidskriftsartikel (refereegranskat)abstract
- Mitochondrial damage is one of the primary causes of neuronal cell death in Parkinson's disease (PD). In PD patients, the mitochondrial damage can be repaired or irreversible. Therefore, mitochondrial damage repair becomes a promising strategy for PD treatment. In this research, hyaluronic acid nanoparticles (HA-NPs) of different molecular weights are used to protect the mitochondria and salvage the mild and limited damage in mitochondria. The HA-NPs with 2190 k Dalton (kDa) HA can improve the mitochondrial function of SH-SY5Y cells and PTEN induced putative kinase 1 (PINK1) knockout mouse embryo fibroblast (MEF) cells. In cases of irreversible damage, NPs with ubiquitin specific peptidase 30 (USP30) siRNA are used to promote mitophagy. Meanwhile, by adding PINK1 antibodies, the NPs can selectively target the irreversibly damaged mitochondria, preventing the excessive clearance of healthy mitochondria.
|
|
| 8. |
- Kozhevnikov, Evgeny, et al.
(författare)
-
A dual-transduction-integrated biosensing system to examine the 3D cell-culture for bone regeneration
- 2019
-
Ingår i: Biosensors & bioelectronics. - : ELSEVIER ADVANCED TECHNOLOGY. - 0956-5663 .- 1873-4235. ; 141
-
Tidskriftsartikel (refereegranskat)abstract
- Three-dimensional (3D) cell cultures developed with living cells and scaffolds have demonstrated outstanding potential for tissue engineering and regenerative medicine applications. However, no suitable tools are available to monitor dynamically variable cell behavior in such a complex microenvironment. In particular, simultaneously assessing cell behavior, cell secretion, and the general state of a 3D culture system is of a really challenging task. This paper presents our development of a dual-transduction-integrated biosensing system that assesses electrical impedance in conjunction with imaging techniques to simultaneously investigate the 3D cell-culture for bone regeneration. First, we created models to mimic the dynamic deposition of the extracellular matrix (ECM) in 3D culture, which underwent osteogenesis by incorporating different amounts of bone-ECM components (collagen, hydroxyapatite [HAp], and hyaluronic acid [HA]) into alginate-based hydrogels. The formed models were investigated by means of electrical impedance spectroscopy (EIS), with the results showing that the impedances increased linearly with collagen and hyaluronan, but changed in a more complex manner with HAp. Thereafter, we created two models that consisted of primary osteoblast cells (OBs), which expressed the enhanced green fluorescent protein (EGFP), and 4T1 cells, which secreted the EGFP-HA, in the alginate hydrogel. We found the capacitance (associated with impedance and measured by EIS) increased with the increases in initial embedded OBs, and also confirmed the cell proliferation over 3 days with the EGFP signal as monitored by the fluorescent imaging component in our system. Interestingly, the change in capacitance is found to be associated with OB migration following stimulation. Also, we show higher capacitance in 4T1 cells that secret HA when compared to control 4T1 cells after a 3-day culture. Taken together, we demonstrate that our biosensing system is able to investigate the dynamic process of 3D culture in a non-invasive and real-time manner.
|
|
| 9. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2016 Challenge Results
- 2016
-
Ingår i: COMPUTER VISION - ECCV 2016 WORKSHOPS, PT II. - Cham : SPRINGER INT PUBLISHING AG. - 9783319488813 - 9783319488806 ; , s. 777-823
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2016 aims at comparing short-term single-object visual trackers that do not apply pre-learned models of object appearance. Results of 70 trackers are presented, with a large number of trackers being published at major computer vision conferences and journals in the recent years. The number of tested state-of-the-art trackers makes the VOT 2016 the largest and most challenging benchmark on short-term tracking to date. For each participating tracker, a short description is provided in the Appendix. The VOT2016 goes beyond its predecessors by (i) introducing a new semi-automatic ground truth bounding box annotation methodology and (ii) extending the evaluation system with the no-reset experiment.
|
|
| 10. |
- Li, Furong, et al.
(författare)
-
Towards quantification of Holocene anthropogenic land-cover change in temperate China : A review in the light of pollen-based REVEALS reconstructions of regional plant cover
- 2020
-
Ingår i: Earth-Science Reviews. - : Elsevier. - 0012-8252 .- 1872-6828. ; 203, s. 1-25
-
Forskningsöversikt (refereegranskat)abstract
- In an attempt to quantify Holocene anthropogenic land-cover change in temperate China, we 1) applied the REVEALS model to estimate plant-cover change using 94 pollen records and relative pollen productivity for 27 plant taxa, 2) reviewed earlier interpretation of pollen studies in terms of climate- and human-induced vegetation change, and 3) reviewed information on past land use from archaeological studies. REVEALS achieved a more realistic reconstruction of plant-cover change than pollen percentages in terms of openland versus woodland. The study suggests successive human-induced changes in vegetation cover. The first signs of human-induced land-cover change (crop cultivation, otherwise specified) are found c. 7 ka BP in the temperate deciduous forest, and S and NE Tibetan Plateau (mainly grazing, possibly crop cultivation), 6.5-6 ka BP in the temperate steppe and temperate desert (grazing, uncertain), and 5.5-5 ka BP in the coniferous-deciduous mixed forest, NE subtropical region, and NW Tibetan Plateau (grazing). Further intensification of anthropogenic land-cover change is indicated 5-4.5 ka BP in the E temperate steppe, and S and NE Tibetan Plateau (grazing, cultivation uncertain), 3.5-3 ka BP in S and NE Tibetan Plateau, W temperate steppe, temperate desert (grazing), and NW Tibetan Plateau (probably grazing), and 2.5-2 ka BP in the temperate deciduous forest, N subtropical region, and temperate desert (grazing). These changes generally agree with increased human activity as documented by archaeological studies. REVEALS reconstructions have a stronger potential than biomization to evaluate scenarios of anthropogenic land-cover change such as HYDE, given they are combined with information from archaeological studies.
|
|
