| 1. |
- Abdelhamid, Hani Nasser, et al.
(författare)
-
A Fast and Scalable Approach for Synthesis of Hierarchical Porous Zeolitic Imidazolate Frameworks and One-Pot Encapsulation of Target Molecules
- 2017
-
Ingår i: Inorganic Chemistry. - : American Chemical Society (ACS). - 0020-1669 .- 1520-510X. ; 56:15, s. 9139-9146
-
Tidskriftsartikel (refereegranskat)abstract
- A trimethylamine (TEA)-assisted synthesis approach that combines the preparation of hierarchical porous zeolitic imidazolate framework ZIF-8 nanoparticles and one-pot encapsulation of target molecules is presented. Two dye molecules, rhodamine B (RhB) and methylene blue (MB), and one protein (bovine serum albumin, BSA) were tested as the target molecules. The addition of TEA into the solution of zinc nitrate promoted the formation of ZnO nanocrystals, which rapidly transformed to ZIF-8 nanoparticles after the addition of the linker 2-methylimidazole (Hmim). Hierarchical porous dye@ZIF-8 nanoparticles with high crystallinity, large BET surface areas (1300–2500 m2/g), and large pore volumes (0.5–1.0 cm3/g) could be synthesized. The synthesis procedure was fast (down to 2 min) and scalable. The Hmim/Zn ratio could be greatly reduced (down to 2:1) compared to previously reported ones. The surface areas, and the mesopore size, structure, and density could be modified by changing the TEA or dye concentrations, or by postsynthetic treatment using reflux in methanol. This synthesis and one-pot encapsulation approach is simple and can be readily scaled up. The photophysical properties such as lifetime and photostability of the dyes could be tuned via encapsulation. The lifetimes of the encapsulated dyes were increased by 3–27-fold for RhB@ZIF-8 and by 20-fold for MB@ZIF-8, compared to those of the corresponding free dyes. The synthesis approach is general, which was successfully applied for encapsulation of protein BSA. It could also be extended for the synthesis of hierarchical porous cobalt-based ZIF (dye@ZIF-67).
|
|
| 2. |
- Bai, Licheng, et al.
(författare)
-
Explaining the Size Dependence in Platinum-Nanoparticle-Catalyzed Hydrogenation Reactions
- 2016
-
Ingår i: Angewandte Chemie International Edition. - : Wiley. - 1433-7851 .- 1521-3773. ; 55:50, s. 15656-15661
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogenation reactions are industrially important reactions that typically require unfavorably high H-2 pressure and temperature for many functional groups. Herein we reveal surprisingly strong size-dependent activity of Pt nanoparticles (PtNPs) in catalyzing this reaction. Based on unambiguous spectral analyses, the size effect has been rationalized by the size-dependent d-band electron structure of the PtNPs. This understanding enables production of a catalyst with size of 1.2 nm, which shows a sixfold increase in turnover frequency and 28-fold increase in mass activity in the regioselective hydrogenation of quinoline, compared with PtNPs of 5.3 nm, allowing the reaction to proceed under ambient conditions with unprecedentedly high reaction rates. The size effect and the synthesis strategy developed herein may provide a general methodology in the design of metal-nanoparticle-based catalysts for a broad range of organic syntheses.
|
|
| 3. |
- Bao, Zijia, et al.
(författare)
-
A bimetallic 3D interconnected metal–organic framework with 2D morphology and its derived electrocatalyst for oxygen reduction
- 2023
-
Ingår i: CrystEngComm. - : Royal Society of Chemistry (RSC). - 1466-8033. ; 25:13, s. 1869-1873
-
Tidskriftsartikel (refereegranskat)abstract
- Metal–organic frameworks (MOFs) are widely used as precursors to generate derivatives for electrocatalysis. However, two-dimensional (2D) MOFs often suffer from the collapse of their 2D structures after being treated at high temperature. Herein, we used the dense ZIF-EC1 as a precursor and doped Co as a secondary metal. The content of Co in ZIF-EC1 can be tuned without changing the crystalline structure. After pyrolysis, the derived carbon-based material maintains the 2D morphology from the parental precursor. The derived ZIF-EC1(ZnCo)-20-900 exhibits the best activity toward the ORR, which is even better than that of Pt/C. This work demonstrates the potential of using a nonporous dense MOF as a precursor and optimizing electrocatalytic ORR activity by tuning the Co content.
|
|
| 4. |
- Bao, Zijia, et al.
(författare)
-
A helical polypyrrole nanotube interwoven zeolitic imidazolate framework and its derivative as an oxygen electrocatalyst
- 2022
-
Ingår i: Chemical Communications. - : Royal Society of Chemistry (RSC). - 1359-7345 .- 1364-548X. ; 58:80, s. 11288-11291
-
Tidskriftsartikel (refereegranskat)abstract
- A helical polypyrrole nanotube interwoven zeolitic imidazolate framework (ZIF) has been prepared for the first time. After pyrolysis, the helical carbon could act as highly active sites, while the 3D-connected nanoarchitecture contributed to fast charge transfer. The derived carbon material exhibits high activity for the ORR and good performance for a Zn–air battery.
|
|
| 5. |
- Cheung, Ocean, et al.
(författare)
-
Nanostructure and pore size control of template-free synthesised mesoporous magnesium carbonate
- 2016
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 6:78, s. 74241-74249
-
Tidskriftsartikel (refereegranskat)abstract
- The structure of mesoporous magnesium carbonate (MMC) first presented in 2013 is investigated using a bottom-up approach. MMC is found to be built from the aggregation of nanoparticles of amorphous MgCO3 and MgO with a coating of amorphous MgCO3. The nanoparticles have dimensions of approximately 2-5 nm as observed using transmission electron microscopy and the aggregation of the particles creates the pore structure of MMC. We further show that the average pore diameter of MMC can be controlled by varying the temperature during the powder formation process and demonstrate that altering the pore size opens the possibility to tune the amorphous phase stabilisation properties that MMC exerts on poorly soluble drug compounds. Specifically, we show the loading and release of the antifungal drug itraconazole using MMC as a drug carrier.
|
|
| 6. |
- Cheung, Ocean, et al.
(författare)
-
Nanostructure and pore size control of template-free synthesised mesoporous magnesium carbonate
- 2016
-
Ingår i: RSC Advances. ; 6:78, s. 74241-74249
-
Tidskriftsartikel (refereegranskat)abstract
- The structure of mesoporous magnesium carbonate (MMC) first presented in 2013 is investigated using a bottom-up approach. MMC is found to be built from the aggregation of nanoparticles of amorphous MgCO3 and MgO with a coating of amorphous MgCO3. The nanoparticles have dimensions of approximately 2-5 nm as observed using transmission electron microscopy and the aggregation of the particles creates the pore structure of MMC. We further show that the average pore diameter of MMC can be controlled by varying the temperature during the powder formation process and demonstrate that altering the pore size opens the possibility to tune the amorphous phase stabilisation properties that MMC exerts on poorly soluble drug compounds. Specifically, we show the loading and release of the antifungal drug itraconazole using MMC as a drug carrier.
|
|
| 7. |
|
|
| 8. |
- Cichocka, Magdalena Ola, et al.
(författare)
-
A Porphyrinic Zirconium Metal-Organic Framework for Oxygen Reduction Reaction : Tailoring the Spacing between Active-Sites through Chain-Based Inorganic Building Units
- 2020
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 142:36, s. 15386-15395
-
Tidskriftsartikel (refereegranskat)abstract
- The oxygen reduction reaction (ORR) is central in carbon-neutral energy devices. While platinum group materials have shown high activities for ORR, their practical uses are hampered by concerns over deactivation, slow kinetics, exorbitant cost, and scarce nature reserve. The low cost yet high tunability of metal-organic frameworks (MOFs) provide a unique platform for tailoring their characteristic properties as new electrocatalysts. Herein, we report a new concept of design and present stable Zr-chain-based MOFs as efficient electrocatalysts for ORR. The strategy is based on using Zr-chains to promote high chemical and redox stability and, more importantly, tailor the immobilization and packing of redox active-sites at a density that is ideal to improve the reaction kinetics. The obtained new electrocatalyst, PCN-226, thereby shows high ORR activity. We further demonstrate PCN-226 as a promising electrode material for practical applications in rechargeable Zn-air batteries, with a high peak power density of 133 mW cm(-2). Being one of the very few electrocatalytic MOFs for ORR, this work provides a new concept by designing chain-based structures to enrich the diversity of efficient electrocatalysts and MOFs.
|
|
| 9. |
- Ge, Meng, et al.
(författare)
-
High-Throughput Electron Diffraction Reveals a Hidden Novel Metal-Organic Framework for Electrocatalysis
- 2021
-
Ingår i: Angewandte Chemie International Edition. - : Wiley. - 1433-7851 .- 1521-3773. ; 60:20, s. 11391-11397
-
Tidskriftsartikel (refereegranskat)abstract
- Metal-organic frameworks (MOFs) are known for their versatile combination of inorganic building units and organic linkers, which offers immense opportunities in a wide range of applications. However, many MOFs are typically synthesized as multiphasic polycrystalline powders, which are challenging for studies by X-ray diffraction. Therefore, developing new structural characterization techniques is highly desired in order to accelerate discoveries of new materials. Here, we report a high-throughput approach for structural analysis of MOF nano- and sub-microcrystals by three-dimensional electron diffraction (3DED). A new zeolitic-imidazolate framework (ZIF), denoted ZIF-EC1, was first discovered in a trace amount during the study of a known ZIF-CO3-1 material by 3DED. The structures of both ZIFs were solved and refined using 3DED data. ZIF-EC1 has a dense 3D framework structure, which is built by linking mono- and bi-nuclear Zn clusters and 2-methylimidazolates (mIm(-)). With a composition of Zn-3(mIm)(5)(OH), ZIF-EC1 exhibits high N and Zn densities. We show that the N-doped carbon material derived from ZIF-EC1 is a promising electrocatalyst for oxygen reduction reaction (ORR). The discovery of this new MOF and its conversion to an efficient electrocatalyst highlights the power of 3DED in developing new materials and their applications.
|
|
| 10. |
- Ge, Meng, et al.
(författare)
-
On the completeness of three-dimensional electron diffraction data for structural analysis of metal-organic frameworks
- 2021
-
Ingår i: Faraday discussions. - 1359-6640 .- 1364-5498. ; 231
-
Tidskriftsartikel (refereegranskat)abstract
- Three-dimensional electron diffraction (3DED) has been proven as an effective and accurate method for structure determination of nano-sized crystals. In the past decade, the crystal structures of various new complex metal-organic frameworks (MOFs) have been revealed by 3DED, which has been the key to understand their properties. However, due to the design of transmission electron microscopes (TEMs), one drawback of 3DED experiments is the limited tilt range of goniometers, which often leads to incomplete 3DED data, particularly when the crystal symmetry is low. This drawback can be overcome by high throughput data collection using continuous rotation electron diffraction (cRED), where data from a large number of crystals can be collected and merged. Here, we investigate the effects of improving completeness on structural analysis of MOFs. We use ZIF-EC1, a zeolitic imidazolate framework (ZIF), as an example. ZIF-EC1 crystallizes in a monoclinic system with a plate-like morphology. cRED data of ZIF-EC1 with different completeness and resolution were analyzed. The data completeness increased to 92.0% by merging ten datasets. Although the structures could be solved from individual datasets with a completeness as low as 44.5% and refined to a high precision (better than 0.04 angstrom), we demonstrate that a high data completeness could improve the structural model, especially on the electrostatic potential map. We further discuss the strategy adopted during data merging. We also show that ZIF-EC1 doped with cobalt can act as an efficient electrocatalyst for oxygen reduction reactions.
|
|
