| 1. |
- Zheng, Qian, et al.
(författare)
-
Constructing InP/ZnSe Quantum Dots with Shell Gradient In3+ Doping for Photoelectrochemical Cells
- 2024
-
Ingår i: ACS Energy Letters. - 2380-8195. ; 9:5, s. 2358-2366
-
Tidskriftsartikel (refereegranskat)abstract
- Environmentally friendly InP/ZnSe core/shell quantum dots (QDs) with high absorption coefficients and tunable band gaps have demonstrated great potential for photoelectrochemical (PEC) water splitting. However, the tightly bound excitonic feature by inherent type I band alignment tends to reduce the charge separation efficiency, limiting their PEC performance. Herein, we devised heterovalent In3+ gradient doping in the ZnSe shell of InP QD to construct core/shell structural InP/ZnSe-G-In QDs. The In3+ dopant increased the Fermi level of the ZnSe shell; thus continuous semiconductor homojunction and band bending were formed by gradient composition doping, which accelerates the exciton separation through the built-in electric field. As a result, the PEC cells based on such QDs exhibited high photocurrent density of 8.7 mA/cm2, demonstrating one of the highest values for the InP-based QDs PEC cells. This work provides an effective strategy for the application of type I band structure QDs in solar energy conversion.
|
|
| 2. |
- Cao, Yuehan, et al.
(författare)
-
Dual Functions of O-Atoms in the g-C3N4/BO0.2N0.8Interface : Oriented Charge Flow In-Plane and Separation within the Interface to Collectively Promote Photocatalytic Molecular Oxygen Activation
- 2020
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 12:30, s. 34432-34440
-
Tidskriftsartikel (refereegranskat)abstract
- The photocatalytic performance of two-dimensional materials is largely limited by the fast recombination of photogenerated charges. Herein, we design and fabricate a novel g-C3N4/BO0.2N0.8 van der Waals heterostructure to realize oriented charge flow in-plane and separation within the interface. On one hand, a B-C bond forms within the g-C3N4/BO0.2N0.8 interface after the introduction of O atoms. The B-C bond as the mediator bridges g-C3N4 and BO0.2N0.8 sides to enhance the effective separation of photogenerated charges. On the other hand, the existence of O atoms promotes the formation of a B-O-O-B intermediate to realize that molecular oxygen can directionally obtain electrons from the surface to generate O2-. As a result, BO0.2N0.8 instead of g-C3N4 is considered to be the main reaction side, and the energy barrier of NO3- generation is significantly decreased. The NO removal performance of g-C3N4/BO0.2N0.8 is enhanced and the NO2 generation is effectively controlled compared with that of g-C3N and g-C3N4/BN. This work could provide an effective and facile strategy to tune oriented charge transfer.
|
|
| 3. |
- Huang, Zheng, et al.
(författare)
-
Constructing type-II CuInSe2/CuInS2 core/shell quantum dots for high-performance photoelectrochemical cells
- 2024
-
Ingår i: SCIENCE CHINA Materials. - 2095-8226. ; 67:1, s. 134-142
-
Tidskriftsartikel (refereegranskat)abstract
- CuInSe2 (CISe) quantum dots (QDs) have shown promising applications in photoelectrochemical (PEC) cells due to their nontoxicity, high extinction coefficient, and wide optical absorption range; however, their low PEC performance prevents their applications due to insufficient charge carrier separation and severe charge recombination. Herein, CISe/CuInS2 (CISe/CIS) core/shell structured QDs are designed and constructed to promote charge separation and diminish interface defects. Afterward, the copper vacancy (VCu) state of CISe/CIS QDs is enriched by modulating the precursor molar ratios of In/Cu. Therefore, the radiative recombination of the conduction band edge electrons with the VCu localized holes becomes dominant and prolongs the carrier lifetime compared with intrinsic band-to-band recombination, thus promoting charge separation. Consequently, the VCu-rich CISe/CIS QD-based photoanode shows a high photocurrent density of 8.0 mA cm−2, which is one of the highest values reported for CISe QD-based PEC cells. This work provides an effective approach for promoting charge carrier separation and transfer through surface or intrinsic defect mediation for PEC applications of I–III–VI semiconductor nanocrystals.
|
|
| 4. |
- Karlsson, Max, et al.
(författare)
-
Mixed halide perovskites for spectrally stable and high-efficiency blue light-emitting diodes
- 2021
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Bright and efficient blue emission is key to further development of metal halide perovskite light-emitting diodes. Although modifying bromide/chloride composition is straightforward to achieve blue emission, practical implementation of this strategy has been challenging due to poor colour stability and severe photoluminescence quenching. Both detrimental effects become increasingly prominent in perovskites with the high chloride content needed to produce blue emission. Here, we solve these critical challenges in mixed halide perovskites and demonstrate spectrally stable blue perovskite light-emitting diodes over a wide range of emission wavelengths from 490 to 451 nanometres. The emission colour is directly tuned by modifying the halide composition. Particularly, our blue and deep-blue light-emitting diodes based on three-dimensional perovskites show high EQE values of 11.0% and 5.5% with emission peaks at 477 and 467 nm, respectively. These achievements are enabled by a vapour-assisted crystallization technique, which largely mitigates local compositional heterogeneity and ion migration.
|
|
| 5. |
- Liu, Yang, et al.
(författare)
-
Defect State Assisted Z-scheme Charge Recombination in Bi2O2CO3/Graphene Quantum Dot Composites for Photocatalytic Oxidation of NO
- 2020
-
Ingår i: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 3:1, s. 772-781
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, we explored the photoinduced charge carriers dynamics rationalizing the photocatalytic oxidation of NO over N-doped Bi2O2CO3/graphene quantum dots composites(N-BOC/GQDs) via time-resolved photoluminescence (TRPL). Under visible light illumination, only GQDs can be photoexcited and inject electrons to N-BOC within 0.5 ns. Under UV light irradiation, the interfacial Z-scheme heterojunction recombination between the electrons in N-BOC and holes in GQDs dominate the depopulation of excited states within 0.36 ns. Such efficient Z-scheme recombination regardless of the large energy difference (1.66 eV) is mediated by the interfacial oxygen vacany defect states characterized by both density functional theory calculations (DFT) and electron paramagnetic resonance (EPR) measurement. This finding provide a novel strategic view to improve the photocatalytic performance of the nanocomposite by interfacial engineering
|
|
| 6. |
- Xie, Jiaqi, et al.
(författare)
-
Sequentially N-Doped Acceptor Primer Layer Facilitates Electron Collection of Inverted Non-Fullerene Organic Solar Cells
-
Ingår i: Advanced Functional Materials. - 1616-301X.
-
Tidskriftsartikel (refereegranskat)abstract
- In most non-fullerene organic solar cells comprising bulk-heterojunction active layers, the inter-domain connectivity of small-molecule acceptors is generally inferior to those of polymeric donors due to their intrinsic short-range ordering. This issue is even exacerbated by the physiochemical mismatch between acceptor-phases and metal-oxide electron transport layers in most inverted n-i-p devices, leading to inefficient electron collection. By pre-depositing an ultra-thin acceptor primer layer, it develops a novel acceptor-enriched-bottom active layer to reinforce the acceptor-phase continuity. It is however challenging to preserve the primer layer during non-orthogonal solvent processing. Thus, sequential n-type doping is implemented on the surface of the primer layer, which allows to slightly reduce the acceptor solubility by polarity regulation, as well as stabilize the film structure via strong π–π interaction between dopant/host acceptor. Upon acceptor enrichment, higher interfacial electron density enhances the built-in potential while the enlarged domains suppress both charge-transfer state and bimolecular recombination. Consequently, the champion device efficiency is greatly improved from ca. 16.1% to 18.0%, mainly resulting from the simultaneously elevated fill factor and short-circuit current density.
|
|
| 7. |
- Zou, Yatao, et al.
(författare)
-
Manipulating crystallization dynamics through chelating molecules for bright perovskite emitters
- 2021
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Molecular additives are widely utilized to minimize non-radiative recombination in metal halide perovskite emitters due to their passivation effects from chemical bonds with ionic defects. However, a general and puzzling observation that can hardly be rationalized by passivation alone is that most of the molecular additives enabling high-efficiency perovskite light-emitting diodes (PeLEDs) are chelating (multidentate) molecules, while their respective monodentate counterparts receive limited attention. Here, we reveal the largely ignored yet critical role of the chelate effect on governing crystallization dynamics of perovskite emitters and mitigating trap-mediated non-radiative losses. Specifically, we discover that the chelate effect enhances lead-additive coordination affinity, enabling the formation of thermodynamically stable intermediate phases and inhibiting halide coordination-driven perovskite nucleation. The retarded perovskite nucleation and crystal growth are key to high crystal quality and thus efficient electroluminescence. Our work elucidates the full effects of molecular additives on PeLEDs by uncovering the chelate effect as an important feature within perovskite crystallization. As such, we open new prospects for the rationalized screening of highly effective molecular additives.
|
|
| 8. |
- Abdellah, Mohamed, et al.
(författare)
-
Drastic difference between hole and electron injection through the gradient shell of CdxSeyZn1−xS1−y quantum dots
- 2017
-
Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3364 .- 2040-3372. ; 9:34, s. 12503-12508
-
Tidskriftsartikel (refereegranskat)abstract
- Ultrafast fluorescence spectroscopy was used to investigate the hole injection in CdxSeyZn1-xS1-y gradient core-shell quantum dot (CSQD) sensitized p-type NiO photocathodes. A series of CSQDs with a wide range of shell thicknesses was studied. Complementary photoelectrochemical cell measurements were carried out to confirm that the hole injection from the active core through the gradient shell to NiO takes place. The hole injection from the valence band of the QDs to NiO depends much less on the shell thickness when compared to the corresponding electron injection to n-type semiconductor (ZnO). We simulate the charge carrier tunneling through the potential barrier due to the gradient shell by numerically solving the Schrodinger equation. The details of the band alignment determining the potential barrier are obtained from X-ray spectroscopy measurements. The observed drastic differences between the hole and electron injection are consistent with a model where the hole effective mass decreases, while the gradient shell thickness increases.
|
|
| 9. |
- Alvarez, Sol Gutierrez, et al.
(författare)
-
Charge Carrier Diffusion Dynamics in Multisized Quaternary Alkylammonium-Capped CsPbBr3 Perovskite Nanocrystal Solids
- 2021
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:37, s. 44742-44750
-
Tidskriftsartikel (refereegranskat)abstract
- CsPbBr3 quantum dots (QDs) are promising candidates for optoelectronic devices. The substitution of oleic acid ( OA) and oleylamine ( OLA) capping agents with a quaternary alkylammonium such as di-dodecyl dimethyl ammonium bromide (DDAB) has shown an increase in external quantum efficiency (EQE) from 0.19% (OA/OLA) to 13.4% (DDAB) in LED devices. The device performance significantly depends on both the diffusion length and the mobility of photoexcited charge carriers in QD solids. Therefore, we investigated the charge carrier transport dynamics in DDAB-capped CsPbBr3 QD solids by constructing a bi-sized QD mixture film. Charge carrier diffusion can be monitored by quantitatively varying the ratio between two sizes of QDs, which varies the mean free path of the carriers in each QD cluster. Excited-state dynamics of the QD solids obtained from ultrafast transient absorption spectroscopy reveals that the photogenerated electrons and holes are difficult to diffuse among small-sized QDs (4 nm) due to the strong quantum confinement. On the other hand, both photoinduced electrons and holes in large-sized QDs (10 nm) would diffuse toward the interface with the small-sized QDs, followed by a recombination process. Combining the carrier diffusion study with a Monte Carlo simulation on the QD assembly in the mixture films, we can calculate the diffusion lengths of charge carriers to be similar to 239 +/- 16 nm in 10 nm CsPbBr3 QDs and the mobility values of electrons and holes to be 2.1 (+/- 0.1) and 0.69 (+/- 0.03) cm(2)/V s, respectively. Both parameters indicate an efficient charge carrier transport in DDAB-capped QD films, which rationalized the perfect performance of their LED device application.
|
|
| 10. |
- Alvarez, Sol Laura Gutierrez, et al.
(författare)
-
Morphology-Dependent One- and Two-Photon Absorption Properties in Blue Emitting CsPbBr3Nanocrystals
- 2022
-
Ingår i: Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 13:22, s. 4897-4904
-
Tidskriftsartikel (refereegranskat)abstract
- The linear and nonlinear optical parameters and morphologic dependence of CsPbBr3 nanocrystals (NCs) are crucial for device engineering. In particular, such information in asymmetric nanocrystals is still insufficient. We characterized the OPLA (σ1) and TPA cross sections (σ2) of a series CsPbBr3 nanocrystals with various aspect ratios (AR) using femtosecond transient absorption spectroscopy (TAS). The σ1 presents a linear volume dependence of all the samples, which agrees with the previous behavior in CsPbBr3 QDs. However, the σ2 values do not exhibit conventional power dependency of the crystal volume but are also modulated by the shape-dependent local field factors. In addition, the local field effect in CsPbBr3 NCs is contributed by their asymmetric morphologies and polar ionic lattices, which is more pronounced than in conventional semiconductor NCs. Finally, we revealed that the lifetimes of photogenerated multiexcitonic species of those nanocrystals feature identical morphology independence in both OPLA and TPA.
|
|
