1. |
- Abelev, Betty, et al.
(författare)
-
Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV
- 2013
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 719:1-3, s. 29-41
-
Tidskriftsartikel (refereegranskat)abstract
- Angular correlations between charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV for transverse momentum ranges within 0.5 < P-T,P-assoc < P-T,P-trig < 4 GeV/c. The correlations are measured over two units of pseudorapidity and full azimuthal angle in different intervals of event multiplicity, and expressed as associated yield per trigger particle. Two long-range ridge-like structures, one on the near side and one on the away side, are observed when the per-trigger yield obtained in low-multiplicity events is subtracted from the one in high-multiplicity events. The excess on the near-side is qualitatively similar to that recently reported by the CMS Collaboration, while the excess on the away-side is reported for the first time. The two-ridge structure projected onto azimuthal angle is quantified with the second and third Fourier coefficients as well as by near-side and away-side yields and widths. The yields on the near side and on the away side are equal within the uncertainties for all studied event multiplicity and p(T) bins, and the widths show no significant evolution with event multiplicity or p(T). These findings suggest that the near-side ridge is accompanied by an essentially identical away-side ridge. (c) 2013 CERN. Published by Elsevier B.V. All rights reserved.
|
|
2. |
|
|
3. |
- Ding, Haoming, et al.
(författare)
-
Progress in Structural Tailoring and Properties of Ternary Layered Ceramics
- 2023
-
Ingår i: Journal of Inorganic Materials. - : SCIENCE PRESS. - 1000-324X. ; 38:8, s. 845-884
-
Forskningsöversikt (refereegranskat)abstract
- MAX/MAB phases are a series of non-van der Waals ternary layered ceramic materials with a hexagonal structure, rich in elemental composition and crystal structure, and embody physical properties of both ceramics and metals. They exhibit great potential for applications in extreme environments such as high temperature, strong corrosion, and irradiation. In recent years, two-dimensional (2D) materials derived from the MAX/MAB phase (MXene and MBene) have attracted enormous interest in the fields of materials physics and materials chemistry and become a new 2D van der Waals material after graphene and transition metal dichalcogenides. Therefore, structural modulation of MAX/MAB phase materials is essential for understanding the intrinsic properties of this broad class of layered ceramics and for investigating the functional properties of their derived structures. In this paper, we summarize new developments in MAX/MAB phases in recent years in terms of structural modulation, theoretical calculation, and fundamental application research and provide an outlook on the key challenges and prospects for the future development of these layered materials.
|
|
4. |
- Fan, Zhouzhou, et al.
(författare)
-
Changes in Plant Rhizosphere Microbial Communities under Different Vegetation Restoration Patterns in Karst and Non-karst Ecosystems
- 2019
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 9:1
-
Tidskriftsartikel (refereegranskat)abstract
- Understanding how patterns of recovery and geological conditions affect microbial communities is important for determining the stability of karst ecosystems. Here, we investigated the diversity and composition of microorganisms in karst and non-karst environments under natural restoration and artificial rehabilitation conditions. The results showed no significant differences in soil microbial diversity, but the microbial communities associated with geological conditions and tree species differed significantly. Variation partitioning analysis (VPA) showed that a total of 77.3% of the variation in bacteria and a total of 69.3% of the variation in fungi could be explained by vegetation type and geological background. There were significant differences in six bacterial classes (Actinobacteria, Alphaproteobacteria, Ktedonobacteria, TK10, Gammaproteobacteria, and Anaerolineae) and nine fungal classes (Eurotiomycetes, Agaricomycetes, unclassified _p_Ascomycota, Sordariomycetes, Tremellomycetes, norank_k_Fungi, Pezizomycetes, Leotiomycetes and Archaeorhizomycetes) among the soils collected from six plots. A Spearman correlation heatmap showed that the microbial community was affected by the major soil properties. Principal coordinates analysis indicated that the microbial community of Pinus yunnanensis in the artificial forest, which was established for the protection of the environment was most similar to that in the natural secondary forest in the karst ecosystem. These findings further our understanding of microbial responses to vegetation restoration and geological conditions.
|
|
5. |
- Feng, Zhenhua, et al.
(författare)
-
Multicore-Fiber-Enabled WSDM Optical Access Network With Centralized Carrier Delivery and RSOA-Based Adaptive Modulation
- 2015
-
Ingår i: IEEE PHOTONICS JOURNAL. - : Institute of Electrical and Electronics Engineers (IEEE). - 1943-0655. ; 7:4
-
Tidskriftsartikel (refereegranskat)abstract
- We proposed and experimentally demonstrated a wavelength-space division multiplexing (WSDM) optical access network architecture with centralized optical carrier delivery utilizing multicore fibers (MCFs) and adaptive modulation based on reflective semiconductor amplifier (RSOA). In our experiment, five of the outer cores are used for undirectional downstream (DS) transmission only, whereas the remaining outer core is utilized as a dedicated channel to transmit upstream (US) signals. Optical carriers for US are delivered from the optical line terminal (OLT) to the optical network unit (ONU) via the inner core and then transmitted back to the OLT after amplification and modulation by the RSOA in the colorless ONU side. The mobile backhaul (MB) service is also supported by the inner core. Wavelengths used in US transmission should be different from that of the MB in order to avoid the Rayleigh backscattering effect in bidirectional transmission. With quadrature phase-shift keying-orthogonal frequency-division multiplexing (QPSK-OFDM) modulation format, the aggregation DS capacity reaches 250 Gb/s using five outer cores and ten wavelengths, and it can be further scaled to 1 Tb/s using 20 wavelengths modulated with 16 QAM-OFDM. For US transmission, 2.5 Gb/s QPSK-OFDM transmission can be achieved just using a low-bandwidth RSOA, and adaptive modulation is applied to the RSOA to further enhance the US data rate to 3.12 Gb/s. As an emulation of high-speed MB transmission, 48 Gb/s inphase and quadrature (IQ) modulated popularization division multiplexing (PDM)-QPSK signal is transmitted in the inner core of MCF and coherently detected in the OLT side. Both DS and US optical signals exhibit acceptable performance with sufficient power budget.
|
|
6. |
- Justice, Anne E., et al.
(författare)
-
Protein-coding variants implicate novel genes related to lipid homeostasis contributing to body-fat distribution
- 2019
-
Ingår i: Nature Genetics. - : Nature Publishing Group. - 1061-4036 .- 1546-1718. ; 51:3, s. 452-469
-
Tidskriftsartikel (refereegranskat)abstract
- Body-fat distribution is a risk factor for adverse cardiovascular health consequences. We analyzed the association of body-fat distribution, assessed by waist-to-hip ratio adjusted for body mass index, with 228,985 predicted coding and splice site variants available on exome arrays in up to 344,369 individuals from five major ancestries (discovery) and 132,177 European-ancestry individuals (validation). We identified 15 common (minor allele frequency, MAF >= 5%) and nine low-frequency or rare (MAF < 5%) coding novel variants. Pathway/gene set enrichment analyses identified lipid particle, adiponectin, abnormal white adipose tissue physiology and bone development and morphology as important contributors to fat distribution, while cross-trait associations highlight cardiometabolic traits. In functional follow-up analyses, specifically in Drosophila RNAi-knockdowns, we observed a significant increase in the total body triglyceride levels for two genes (DNAH10 and PLXND1). We implicate novel genes in fat distribution, stressing the importance of interrogating low-frequency and protein-coding variants.
|
|
7. |
- Liu, Chang, et al.
(författare)
-
Effect of Porosity on Soil-Water Retention Curves : Theoretical and Experimental Aspects
- 2020
-
Ingår i: Geofluids. - : Hindawi Limited. - 1468-8115 .- 1468-8123. ; 2020
-
Tidskriftsartikel (refereegranskat)abstract
- Porosity change is a common characteristic of natural soils in fluid-solid interaction problems, which can lead to an obvious change of the soil-water retention curve (SWRC). The influence of porosity on soil water retention phenomena is investigated by a theoretical model and an experimental test in this study. A model expressing the change in suction with porosity and effective saturation is put forward theoretically. The model is based on an idealization of three-phase porous materials, the pore structures of which are homogeneous and isotropic. It accounts for the porosity effect on soil water retention, using four parameters with clear physical meanings. The presented model can obtain the SWRC at any porosity, which will reduce the test number required in characterizing the hydraulic behavior of soil. A laboratory experiment for loamy sand with different porosities is performed. The test results show that suction has a significant variation with changes in porosity and decreases with the increase of porosity. The formulation is verified by both the test data and the literature data for FEBEX bentonite and Boom clay. The very good agreements between measured and predicted results show that the SWRC model is reliable and feasible for various soils.
|
|
8. |
- Liu, Yi, et al.
(författare)
-
Porous, robust, thermally stable, and flame retardant nanocellulose/polyimide separators for safe lithium-ion batteries
- 2023
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 11:43, s. 23360-23369
-
Tidskriftsartikel (refereegranskat)abstract
- The safety of lithium-ion batteries (LIBs) is paramount for all users. One effective way to improve safety is incorporating heat-resistant polyimide (PI) separators, which can increase the thermal stability of batteries and minimize the risk of thermal runaway. However, preparing PI separators with both an ideal pore structure and adequate mechanical properties remains as a challenge. Here, we introduced decabromodiphenyl ethane (DBDPE) and cellulose nanofibers (CNFs) into PI and produced a hybrid separator with an outstanding pore structure and excellent mechanical properties. Aided with DBDPE, the separators attain a well-defined and uniform pore size (20 nm), while demonstrating high porosities (78%) through phase inversion processes. Owing to the addition of CNFs, the mechanical properties of the separators were significantly improved, with a tensile strength of 25.4 MPa and an elastic modulus of 550.1 MPa. Moreover, the separators demonstrate high ion conductivity (0.45 mS cm-1), excellent thermal-dimensional stability (up to 200 degrees C), remarkable flame retardancy, and outstanding electrolyte wettability. At room temperature, the batteries with the separators demonstrate comparable performance with those of polypropylene (PP) separators. However, when subjected to thermal shock treatments, the batteries with the separators outperform those with PP, showcasing their superior performance. The work introduces a novel strategy for designing high-performance separators, thereby paving the way for advancements in the fabrication of LIBs with enhanced safety features. A porous, robust, and thermally stable hybrid separator was developed to solve the dilemma between desired pore structures and mechanical properties in polyimide separators by introducing decabromodiphenyl ethane and cellulose nanofibers.
|
|
9. |
- Marouli, Eirini, et al.
(författare)
-
Rare and low-frequency coding variants alter human adult height
- 2017
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 542:7640, s. 186-190
-
Tidskriftsartikel (refereegranskat)abstract
- Height is a highly heritable, classic polygenic trait with approximately 700 common associated variants identified through genome-wide association studies so far. Here, we report 83 height-associated coding variants with lower minor-allele frequencies (in the range of 0.1-4.8%) and effects of up to 2 centimetres per allele (such as those in IHH, STC2, AR and CRISPLD2), greater than ten times the average effect of common variants. In functional follow-up studies, rare height increasing alleles of STC2 (giving an increase of 1-2 centimetres per allele) compromised proteolytic inhibition of PAPP-A and increased cleavage of IGFBP-4 in vitro, resulting in higher bioavailability of insulin-like growth factors. These 83 height-associated variants overlap genes that are mutated in monogenic growth disorders and highlight new biological candidates (such as ADAMTS3, IL11RA and NOX4) and pathways (such as proteoglycan and glycosaminoglycan synthesis) involved in growth. Our results demonstrate that sufficiently large sample sizes can uncover rare and low-frequency variants of moderate-to-large effect associated with polygenic human phenotypes, and that these variants implicate relevant genes and pathways.
|
|
10. |
- Meng, Shuang, et al.
(författare)
-
Numerical simulation of slipstreams and wake flows of trains with different nose lengths passing through a tunnel
- 2021
-
Ingår i: Tunnelling and Underground Space Technology. - : Elsevier BV. - 0886-7798. ; 108
-
Tidskriftsartikel (refereegranskat)abstract
- This study examined the slipstreams induced by high-speed trains (HSTs) passing through a tunnel using the improved delayed detached eddy simulation (IDDES) method. First, the flow fields in the open air and in a tunnel were compared. Furthermore, the flow in a tunnel was analyzed in detail, considering the development of both instantaneous flow structures and slipstream profiles at various measurement points. Finally, by considering four different nose lengths (4 m, 7 m, 9 m, and 12 m), the differences in the slipstream profiles and the wake flow induced by HSTs passing through a tunnel were determined. The results show that the piston effect had a significant influence on the slipstream profiles, causing a larger positive peak when a train passed through a tunnel. The peaks of the slipstream profiles decrease as the distances from the center of the track (COT) and the top of the rail (TOR) increases. The results show that a long nose length can reduce the scale and strength of the instantaneous x-vorticity and y-vorticity in the wake propagation region, thereby lowering the maximum slipstream peaks. The 12-m nose length train induced 56.7% lower velocity than the 4-m nose length train at y = 2 m beside the COT and z = 0.2 m above the TOR. In particular, the standard deviations of the positive peaks of the seven cross-sections decrease by 38.4% with the increase in the nose length from 4 m to 12 m, which means that a longer nose length can reduce the turbulence level in the wake propagation region. Consequently, from the perspectives of the safety and comfort of trackside people, a long nose length train is strongly recommended.
|
|