1. |
- Abreu, P., et al.
(författare)
-
Measurement of the gluon fragmentation function and a comparison of the scaling violation in gluon and quark jets
- 2000
-
Ingår i: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 13:4, s. 573-589
-
Tidskriftsartikel (refereegranskat)abstract
- The fragmentation functions of quarks and gluons are measured in various three-jet topologies in Z decays from the full data set collected with the DELPHI detector at the Z resonance between 1992 and 995. The results at different values of transverse momentum-like scales are compared. A parameterization of the quark and gluon fragmentation functions at a fixed reference scale is given. The quark and gluon fragmentation functions show the predicted pattern of scaling violations. The scaling violation for quark jets as a function of a transverse momentum-like scale is in a good agreement with that observed in lower energy e+e- annihilation experiments. For gluon jets it appears to be significantly stronger. The scale dependences of the gluon and quark fragmentation functions agree with the prediction of the DGLAP evolution equations from which the colour factor ratio CA/CF is measured to be: CA/CF = 2.26 ± 0.09stat. ± 0.06sys. ± 0.12clus.,scale..
|
|
2. |
- Abreu, P., et al.
(författare)
-
Study of dimuon production in photon-photon collisions and measurement of QED photon structure functions at LEP
- 2001
-
Ingår i: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 19:1, s. 15-28
-
Tidskriftsartikel (refereegranskat)abstract
- Muon pair production in the process e+e- → e+e- μ+μ- is studied using the data taken at LEP1 (√s ≃ mz) with the DELPHI detector during the years 1992-1995. The corresponding integrated luminosity is 138.5 pb-1. The QED predictions have been tested over the whole Q2 range accessible at LEP1 (from several GeV2/c4 to several hundred GeV2/c4) by comparing experimental distributions with distributions resulting from Monte Carlo simulations using various generators. Selected events are used to extract the leptonic photon structure function Fγ 2. Azimuthal correlations are used to obtain information on additional structure functions, Fγ A and Fγ B, which originate from interference terms of the scattering amplitudes. The measured ratios Fγ A/Fγ 2 and FγB/Fγ 2 are significantly different from zero and consistent with QED predictions.
|
|
3. |
- Schael, S, et al.
(författare)
-
Precision electroweak measurements on the Z resonance
- 2006
-
Ingår i: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
-
Forskningsöversikt (refereegranskat)abstract
- We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
|
|
4. |
- Anedda, Francesca, et al.
(författare)
-
Multiple polymorphisms affect expression and function of the neuropeptide S receptor (NPSR1)
- 2011
-
Ingår i: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 6:12, s. e29523-
-
Tidskriftsartikel (refereegranskat)abstract
- Background: neuropeptide S (NPS) and its receptor NPSR1 act along the hypothalamic-pituitary-adrenal axis to modulate anxiety, fear responses, nociception and inflammation. The importance of the NPS-NPSR1 signaling pathway is highlighted by the observation that, in humans, NPSR1 polymorphism associates with asthma, inflammatory bowel disease, rheumatoid arthritis, panic disorders, and intermediate phenotypes of functional gastrointestinal disorders. Because of the genetic complexity at the NPSR1 locus, however, true causative variations remain to be identified, together with their specific effects on receptor expression or function. To gain insight into the mechanisms leading to NPSR1 disease-predisposing effects, we performed a thorough functional characterization of all NPSR1 promoter and coding SNPs commonly occurring in Caucasians (minor allele frequency >0.02). Principal Findings: we identified one promoter SNP (rs2530547 [-103]) that significantly affects luciferase expression in gene reporter assays and NPSR1 mRNA levels in human leukocytes. We also detected quantitative differences in NPS-induced genome-wide transcriptional profiles and CRE-dependent luciferase activities associated with three NPSR1 non-synonymous SNPs (rs324981 [Ile107Asn], rs34705969 [Cys197Phe], rs727162 [Arg241Ser]), with a coding variant exhibiting a loss-of-function phenotype (197Phe). Potential mechanistic explanations were sought with molecular modelling and bioinformatics, and a pilot study of 2230 IBD cases and controls provided initial support to the hypothesis that different cis-combinations of these functional SNPs variably affect disease risk. Significance: these findings represent a first step to decipher NPSR1 locus complexity and its impact on several human conditions NPS antagonists have been recently described, and our results are of potential pharmacogenetic relevance.
|
|
5. |
- Anthoni, Heidi, et al.
(författare)
-
A locus on 2p12 containing the co-regulated MRPL19 and C2ORF3 genes is associated to dyslexia.
- 2007
-
Ingår i: Human Molecular Genetics. - : Oxford University Press (OUP). - 0964-6906 .- 1460-2083. ; 16:6, s. 667-77
-
Tidskriftsartikel (refereegranskat)abstract
- DYX3, a locus for dyslexia, resides on chromosome 2p11-p15. We have refined its location on 2p12 to a 157 kb region in two rounds of linkage disequilibrium (LD) mapping in a set of Finnish families. The observed association was replicated in an independent set of 251 German families. Two overlapping risk haplotypes spanning 16 kb were identified in both sample sets separately as well as in a joint analysis. In the German sample set, the odds ratio for the most significantly associated haplotype increased with dyslexia severity from 2.2 to 5.2. The risk haplotypes are located in an intergenic region between FLJ13391 and MRPL19/C2ORF3. As no novel genes could be cloned from this region, we hypothesized that the risk haplotypes might affect long-distance regulatory elements and characterized the three known genes. MRPL19 and C2ORF3 are in strong LD and were highly co-expressed across a panel of tissues from regions of adult human brain. The expression of MRPL19 and C2ORF3, but not FLJ13391, were also correlated with the four dyslexia candidate genes identified so far (DYX1C1, ROBO1, DCDC2 and KIAA0319). Although several non-synonymous changes were identified in MRPL19 and C2ORF3, none of them significantly associated with dyslexia. However, heterozygous carriers of the risk haplotype showed significantly attenuated expression of both MRPL19 and C2ORF3, as compared with non-carriers. Analysis of C2ORF3 orthologues in four non-human primates suggested different evolutionary rates for primates when compared with the out-group. In conclusion, our data support MRPL19 and C2ORF3 as candidate susceptibility genes for DYX3.
|
|
6. |
- Checchi, V., et al.
(författare)
-
Wide diameter immediate post-extractive implants vs delayed placement of normal-diameter implants in preserved sockets in the molar region: 1-year postloading outcome of a randomised controlled trial
- 2017
-
Ingår i: European Journal of Oral Implantology. - 1756-2406. ; 10:3, s. 263-278
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: To compare the effectiveness of 6.0 to 8.0 mm-wide diameter implants, placed immediately after tooth extraction, with conventional 4.0 or 5.0 mm diameter implants placed in a preserved socket after a 4-month period of healing in the molar region. Materials and Methods: Just after extraction of one or two molar teeth, and with no vertical loss of the buccal bone in relation to the palatal wall, 100 patients requiring immediate post-extractive implants were randomly allocated to immediate placement of one or two 6.0 to 8.0 mm-wide diameter implants (immediate group; 50 patients) or for socket preservation using a porcine bone substitute covered by a resorbable collagen barrier (delayed group; 50 patients), according to a parallel group design in one centre. Bone-to-implant gaps were filled with autogenous bone retrieved with a trephine drill used to prepare the implant sites for the immediate wide diameter post-extractive implants. Four months after socket preservation, one to two 4.0 or 5.0 mm-wide delayed implants were placed. Implants were loaded 4 months after placement with fixed provisional restorations in acrylic, and replaced after 4 months by fixed, definitive, metal-ceramic restorations. Patients were followed to 1 year after loading. Outcome measures were: implant failures, complications, aesthetics assessed using the pink esthetic score (PES), peri-implant marginal bone level changes, patient satisfaction, number of appointments and surgical interventions recorded, when possible, by blinded assessors. Results: Three patients dropped out 1 year after loading from the immediate group vs six from the delayed group. Five implants out of 47 failed in the immediate group (10.6%) vs two out 44 (4.6%) in the delayed group, the difference being not statistically significant (difference in proportion = 6.0%, 95% CI: -8.8% to 20.8%, P = 0.436). In the immediate group 10 patients were affected by 10 complications, while in the delayed group four patients were affected by four complications. The difference was not statistically significant (difference in proportion = 12%, 95% CI: -2% to 26%, P = 0.084). At delivery of the definitive prostheses, 4 months after loading, the mean total PES score was 9.65 ± 1.62 and 10.44 ± 1.47 in the immediate and delayed groups, respectively. At 1 year after loading, the mean total PES score was 9.71 ± 2.71 and 10.86 ± 1.37 in the immediate and delayed groups, respectively. The Total PES score was statistically significantly better at delayed implants both at 4 months (mean difference = 0.79; 95% CI: 0.05 to 1.53; P = 0.03) and at 1 year (mean difference = 1.15; 95% CI: 0.13 to 2.17; P = 0.02). Marginal bone levels at implant insertion (after bone grafting) were 0.04 mm for immediate and 0.11 mm for delayed implants, which was statistically significantly different (mean difference = 0.07; 95% CI: 0.02 to 0.12; P < 0.0001). One year after loading, patients in the immediate group lost on average 1.06 mm and those from the delayed group 0.63 mm, the difference being statistically significant (mean difference = 0.43 mm; 95% CI: 0.15 to 0.61; P < 0.0001). All patients were fully or partially satisfied both for function and aesthetics, and would undergo the same procedure again both at 4 months and 1 year after loading. Patients from the immediate group required on average 7.48 ± 1.45 visits to the clinician and 2.14 ± 0.49 surgical interventions and to have their definitive prostheses delivered vs 10.30 ± 0.99 visits and 3.08 ± 0.40 surgical interventions for the delayed group, the difference being statistically significant (P < 0.001 for visits, and P < 0.001 for surgical interventions). Conclusions: Preliminary 1 year follow-up data suggest that immediate placement of 6.0 to 8.0 mm wide diameter implants in molar extraction sockets yielded inferior aesthetic outcomes than ridge preservation and delayed placement of conventional 4.0 to 5.0 mm diameter implants. Conflict of interest statement: This trial was partially funded by the manufacturer of the implants evaluated in his investigation (MegaGen Implant Co, Gyeongbuk, South Korea). However, data belonged to the authors and in no way did the manufacturer interfere with the conduct of the trial or the publication of its results. © Quintessenz.
|
|
7. |
- De Luca, Alberto, et al.
(författare)
-
On the generalizability of diffusion MRI signal representations across acquisition parameters, sequences and tissue types : Chronicles of the MEMENTO challenge
- 2021
-
Ingår i: NeuroImage. - : Elsevier BV. - 1053-8119 .- 1095-9572. ; 240
-
Tidskriftsartikel (refereegranskat)abstract
- Diffusion MRI (dMRI) has become an invaluable tool to assess the microstructural organization of brain tissue. Depending on the specific acquisition settings, the dMRI signal encodes specific properties of the underlying diffusion process. In the last two decades, several signal representations have been proposed to fit the dMRI signal and decode such properties. Most methods, however, are tested and developed on a limited amount of data, and their applicability to other acquisition schemes remains unknown. With this work, we aimed to shed light on the generalizability of existing dMRI signal representations to different diffusion encoding parameters and brain tissue types. To this end, we organized a community challenge - named MEMENTO, making available the same datasets for fair comparisons across algorithms and techniques. We considered two state-of-the-art diffusion datasets, including single-diffusion-encoding (SDE) spin-echo data from a human brain with over 3820 unique diffusion weightings (the MASSIVE dataset), and double (oscillating) diffusion encoding data (DDE/DODE) of a mouse brain including over 2520 unique data points. A subset of the data sampled in 5 different voxels was openly distributed, and the challenge participants were asked to predict the remaining part of the data. After one year, eight participant teams submitted a total of 80 signal fits. For each submission, we evaluated the mean squared error, the variance of the prediction error and the Bayesian information criteria. The received submissions predicted either multi-shell SDE data (37%) or DODE data (22%), followed by cartesian SDE data (19%) and DDE (18%). Most submissions predicted the signals measured with SDE remarkably well, with the exception of low and very strong diffusion weightings. The prediction of DDE and DODE data seemed more challenging, likely because none of the submissions explicitly accounted for diffusion time and frequency. Next to the choice of the model, decisions on fit procedure and hyperparameters play a major role in the prediction performance, highlighting the importance of optimizing and reporting such choices. This work is a community effort to highlight strength and limitations of the field at representing dMRI acquired with trending encoding schemes, gaining insights into how different models generalize to different tissue types and fiber configurations over a large range of diffusion encodings.
|
|
8. |
|
|
9. |
- Esposito, Marco, 1965, et al.
(författare)
-
Four mm-long versus longer implants in augmented bone in atrophic posterior jaws: 4-month post-loading results from a multicentre randomised controlled trial
- 2016
-
Ingår i: European Journal of Oral Implantology. - 1756-2406. ; 9:4, s. 393-409
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: To evaluate whether 4-mm long dental implants could be an alternative to augmentation with equine bone blocks and the placement of at least 10-mm long implants in atrophic posterior jaws. Materials and methods: Forty patients with atrophic posterior (premolar and molar areas) mandibles having 5 to 6 mm bone height above the mandibular canal and 40 patients with atrophic maxillae having 4 to 5 mm below the maxillary sinus, were randomised according to a parallel group design to receive one to three 4.0 mm-long implants or one to three implants, which were at least 10 mm long, in augmented bone at two centres. All implants had a diameter of 4.0 or 4.5 mm. Mandibles were vertically augmented with interpositional equine bone blocks and resorbable barriers. Implants were placed 4 months after interpositional grafting. Maxillary sinuses were augmented with particulated porcine bone via a lateral window covered with resorbable barriers, and implants were placed simultaneously. Implants were not submerged and were loaded after 4 months with provisional prostheses. Four months later, screw-retained reinforced acrylic restorations were delivered, and then replaced after 4 months by definitive screw-retained metal-composite prostheses. Patients were followed up to 4-months post-loading. Outcome measures included prosthesis and implant failures, any complication and peri-implant marginal bone level changes. Results: No patient dropped out. In six augmented mandibles (30%), it was not possible to place implants which were at least 10.0-mm long, therefore shorter implants had to be placed instead. In particular, one mandible fractured and the patient did not want to go ahead with the treatment. One implant of the patient with the mandible fracture from the augmented group failed versus two 4.0 mm implants in two patients from the short implant group. In the maxillae, three short implants failed in two patients versus five long implants in three patients (two long implants and one short implant dropped into the maxillary sinus). Two prostheses on short implants (one mandibular and one maxillary) were placed at a later stage because of implant failures versus four prostheses (one mandibular and three maxillary) at augmented sites. In particular, three patients of the augmented group (one mandible and two maxillary) were not prosthetically rehabilitated. There were no statistically significant differences in implant failures (P (chi-square test) = 1.000; difference in proportion = 0; 95% CI:-0.13 to 0.13 or prostheses failures (P (chi-square test) = 0.399; difference in proportion = 0.05; 95% CI:-0.06 to 0.16). At mandibular sites, nine augmented patients were affected by complications versus one patient treated with short implants (P (chi-square test) = 0.003; difference in proportion = 0.40; 95% CI: 0.16 to 0.64), with the difference being statistically significant. No significant differences were found for the maxillae: eight sinus lift patients versus three patients rehabilitated with maxillary short implants were affected by complications (P (chi-square test) = 0.077; difference in proportion = 0.25; 95% CI:-0.02 to 0.52). Patients with mandibular short implants lost on average 0.40 mm of peri-implant bone at 4 months and patients with 10 mm or longer mandibular implants lost 0.52 mm. Patients with short maxillary implants lost on average 0.48 mm peri-implant bone at 4 months and patients with 10 mm or longer maxillary implants lost 0.50 mm. The difference was statistically significant in the mandibles (mean difference: -0.12 mm, 95% CI: -0.20 to -0.04, P (ANCOVA) = 0.006), but not in the maxillae (mean difference: -0.02 mm, 95% CI: -0.10 to 0.07, P (ANCOVA) = 0.711). Conclusions: Four months after loading 4.0 mm-long implants achieved similar results, if not better, than longer implants in augmented jaws, but were affected by fewer complications. Short implants might be a preferable choice to bone augmentation, especially in mandibles, since the treatment is less invasive, faster, cheaper, and associated with less morbidity; however, 5- to 10-year post-loading data is necessary before making reliable recommendations.
|
|
10. |
- Esposito, Marco, 1965, et al.
(författare)
-
Immediate, immediate-delayed (6 weeks) and delayed (4 months) post-extractive single implants: 1-year post-loading data from a randomised controlled trial
- 2017
-
Ingår i: European Journal of Oral Implantology. - 1756-2406. ; 10:1, s. 11-26
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: To compare the clinical outcome of single implants placed immediately after tooth extraction with implants placed 6 weeks after tooth extraction (immediate-delayed placement), and with implants placed after 4-month extraction and socket healing (delayed placement). Materials and methods: Two-hundred and ten (210) patients requiring a single implant-supported crown to replace a tooth to be extracted were randomised to receive immediate post-extractive implants (70 patients), immediate-delayed implants at 6 weeks (70 patients), and delayed implants after 4 months of healing (70 patients) according to a parallel group design. When needed, patients of the immediate and immediate-delayed group had the socket grafted with a bone substitute and covered with a resorbable membrane at implant placement. Sockets randomised to delayed implants were grafted in the same manner if poorly preserved or in the aesthetic areas (from second upper to second upper premolars). Implants inserted with at least 25 Ncm torque were left to heal unloaded for 4 months, whereas those inserted with less than 25 Ncm were left to heal unloaded for 6 months. Temporary crowns were delivered and were to be replaced by definitive ones after 4 months. Outcome measures were crown and implant failures, complications, peri-implant marginal bone level changes, aesthetically assessed using the pink esthetic score (PES), and patient satisfaction recorded by blinded assessors. Patients were followed up to 1 year post-loading. Results: One year after loading, three patients dropped out from the immediate group, five from the immediate-delayed group, and six from the delayed group. Four implants (6%) failed in the immediate, four (6.2%) in the immediate-delayed, and one (1.6%) from the delayed group (P (chisquare test) = 0.369). Apart from the crowns (which failed due to implant losses), no other crown had to be remade. Six immediate, six immediate-delayed and four delayed implants were affected by one complication each (P (chi-square test) = 0.792). Mean peri-implant marginal bone loss after 1 year was-0.25 +/- 0.17 mm (CI 95%-0.29; -0.20) at immediate,-0.29 +/- 0.14 mm (CI 95% -0.32; -0.25) at immediate-delayed, and-0.31 +/- 0.16 mm (Cl 95%-0.35; -0.27) at delayed placed implants (P (Kruskal-Wallis test) = 0.015). One year after loading, the mean total aesthetic score was 12.52, 12.49 and 11.78 at the immediate, immediate-delayed and delayed groups, respectively (P (Kruskal-Wallis test) < 0.001). All patients were fully satisfied both with function and aesthetics, and would undergo the same procedure again, with four exceptions (one from the immediate, one from the immediate-delayed and two from the delayed group), who were only partially satisfied with aesthetics (P = 0.785). Conclusions: No statistically significant differences for failures, complications and patient satisfaction were observed when placing single implants immediately, 6 weeks or 4 months after tooth extraction; nevertheless, failures were more frequent at immediate and immediate-delayed placed implants. Bone level changes were similar between the different procedures, but aesthetics were better results at immediate and immediate-delayed implants.
|
|