| 1. |
- Abay, Simon, 1980, et al.
(författare)
-
Quantized Conductance and Its Correlation to the Supercurrent in a Nanowire Connected to Superconductors
- 2013
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 13:8, s. 3614-3617
-
Tidskriftsartikel (refereegranskat)abstract
- We report conductance and supercurrent of InAs nano wires coupled to Al-superconducting electrodes with short channel lengths and good Ohmic contacts. The nanowires are suspended 15 nm above a local gate electrode. The charge density in the nanowires can be controlled by a small change in the gate voltage. For large negative gate voltages, the number of conducting channels is reduced gradually, and we observe a stepwise decrease of both conductance and critical current before the conductance vanishes completely.
|
|
| 2. |
- Apaydin, Dogukan, 1991, et al.
(författare)
-
Optically Pumped UVC Photonic Crystal Surface-Emitting Laser
- 2023
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Photonic crystal surface-emitting lasers (PCSELs) are a new type of semiconductor lasers that offer a high optical output power while maintaining single-mode operation and a low divergence angle. Such devices rely upon the in-plane optical feedback from a two-dimensional photonic crystal and feature out-of-plane emission of the modes with zero group velocity at the photonic band edges by diffraction. Since the demonstration of the first PCSEL [1], the concept has been implemented in standard semiconductor materials with the demonstration of highperforming infrared and blue-emitting lasers [2, 3]. Extending the laser operation to shorter emission wavelengths would be a major breakthrough as such lasers would be of high interest for disinfection, material processing, curing, and medical treatments.
|
|
| 3. |
- Apaydin, Dogukan, 1991, et al.
(författare)
-
UVC photonic crystal surface-emitting lasers with low-divergent far-fields
- 2023
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Photonic crystal surface-emitting lasers (PCSEL) emitting in the ultraviolet (UV) C spectral range are exciting devices due to their low divergence and single-mode emission capable of high output powers as already demonstrated in the infrared [1] and blue spectral range [2]. This is due to their unique design, which incorporates a photonic crystal leading to a large optical gain area. PCSELs are based upon in-plane feedback from the photonic crystal and out-of-plane emission by the diffraction of the modes with zero group velocity at the photonic band edges. We recently demonstrated, to the best of our knowledge, the first UVC PCSEL with an emission at 279 nm. The device structure consists of 3 x 2 nm AlGaN quantum wells (QW) in a 60 nm Al0.70Ga0.30N waveguide and AlN cladding layers. The 140x140 μm large photonic crystal is dry etched into the top AlN cladding layer with a hexagonal lattice consisting of circular holes with a lattice constant of 140 nm and an etch depth of 65 nm, leaving 65 nm between the bottom of the photonic crystals and the first quantum well. Lasing in these PCSELs was achieved by resonant pumping of the QWs by a 266 nm pulsed laser with a spot size of 82 μm at room temperature. The devices exhibit threshold pump power densities from 25 down to 13 MW/cm2 showing a spectral narrowing down to 25 pm. Far-field patterns and band structures were investigated for a range of filling factors (fraction of the surface that is etched) between 10% to 26%, and the far-fields contain emission bands that were not yet reported in PCSELs at longer wavelengths. Changing the filling factor affects the photonic crystal band structure and thereby the optical mode at the Γ-point that will reach threshold first. This feature enables us to intentionally select the lasing mode with the desired far-field pattern. By a proper choice of filling factor, the intensity in the angular emission bands is diminished, resulting in a far-field with a narrow beam divergence of <1°.
|
|
| 4. |
- Chalangar, Ebrahim, 1984-, et al.
(författare)
-
Influence of morphology on electrical and optical properties of graphene/Al-doped ZnO-nanorod composites
- 2018
-
Ingår i: Nanotechnology. - Bristol : Institute of Physics Publishing (IOPP). - 0957-4484 .- 1361-6528. ; 29:41
-
Tidskriftsartikel (refereegranskat)abstract
- The development of future 3D-printed electronics relies on the access to highly conductive inexpensive materials that are printable at low temperatures (<100 C). The implementation of available materials for these applications are, however, still limited by issues related to cost and printing quality. Here, we report on the simple hydrothermal growth of novel nanocomposites that are well suited for conductive printing applications. The nanocomposites comprise highly Al-doped ZnO nanorods grown on graphene nanoplatelets (GNPs). The ZnO nanorods play the two major roles of (i) preventing GNPs from agglomerating and (ii) promoting electrical conduction paths between the graphene platelets. The effect of two different ZnO-nanorod morphologies with varying Al-doping concentration on the nanocomposite conductivity and the graphenedispersity are investigated. Time-dependent absorption, photoluminescence and photoconductivity measurements show that growth in high pH solutions promotes a better graphene dispersity, higher doping levels and enhanced bonding between the graphene and the ZnO nanorods. Growth in low pH solutions yields samples characterized by a higher conductivity and a reduced number of surface defects. These samples also exhibit a large persistent photoconductivity attributed to an effective charge separation and transfer from the nanorods to the graphene platelets. Our findings can be used to tailor the conductivity of novel printable composites, or for fabrication of large volumes of inexpensive porous conjugated graphene-semiconductor composites. © 2018 IOP Publishing Ltd.
|
|
| 5. |
- Chalangar, Ebrahim, PhD student, 1984-, et al.
(författare)
-
Synthesis of Vertically Aligned ZnO Nanorods Using Sol-gel Seeding and Colloidal Lithography Patterning
- 2021
-
Ingår i: Nanoscale Research Letters. - Heidelberg : Springer Science and Business Media LLC. - 1931-7573 .- 1556-276X. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- Different ZnO nanostructures can be grown using low-cost chemical bath deposition. Although this technique is cost-efficient and flexible, the final structures are usually randomly oriented and hardly controllable in terms of homogeneity and surface density. In this work, we use colloidal lithography to pattern (100) silicon substrates to fully control the nanorods' morphology and density. Moreover, a sol-gel prepared ZnO seed layer was employed to compensate for the lattice mismatch between the silicon substrate and ZnO nanorods. The results show a successful growth of vertically aligned ZnO nanorods with controllable diameter and density in the designated openings in the patterned resist mask deposited on the seed layer. Our method can be used to fabricate optimized devices where vertically ordered ZnO nanorods of high crystalline quality are crucial for the device performance.
|
|
| 6. |
- Dabkowska, Aleksandra, et al.
(författare)
-
Assembly of RNA nanostructures on supported lipid bilayers.
- 2015
-
Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3372 .- 2040-3364. ; 7:2, s. 583-596
-
Tidskriftsartikel (refereegranskat)abstract
- The assembly of nucleic acid nanostructures with controlled size and shape has large impact in the fields of nanotechnology, nanomedicine and synthetic biology. The directed arrangement of nano-structures at interfaces is important for many applications. In spite of this, the use of laterally mobile lipid bilayers to control RNA three-dimensional nanostructure formation on surfaces remains largely unexplored. Here, we direct the self-assembly of RNA building blocks into three-dimensional structures of RNA on fluid lipid bilayers composed of cationic 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) or mixtures of zwitterionic 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine (DOPC) and cationic sphingosine. We demonstrate the stepwise supramolecular assembly of discrete building blocks through specific and selective RNA-RNA interactions, based on results from quartz crystal microbalance with dissipation (QCM-D), ellipsometry, fluorescence recovery after photobleaching (FRAP) and total internal reflection fluorescence microscopy (TIRF) experiments. The assembly can be controlled to give a densely packed single layer of RNA polyhedrons at the fluid lipid bilayer surface. We show that assembly of the 3D structure can be modulated by sequence specific interactions, surface charge and changes in the salt composition and concentration. In addition, the tertiary structure of the RNA polyhedron can be controllably switched from an extended structure to one that is dense and compact. The versatile approach to building up three-dimensional structures of RNA does not require modification of the surface or the RNA molecules, and can be used as a bottom-up means of nanofabrication of functionalized bio-mimicking surfaces.
|
|
| 7. |
- Hussain, Laiq, et al.
(författare)
-
Defect-induced infrared electroluminescence from radial GaInP/AlGaInP quantum well nanowire array light- emitting diodes
- 2017
-
Ingår i: Nanotechnology. - Bristol : IOP Publishing. - 0957-4484 .- 1361-6528. ; 28:48
-
Tidskriftsartikel (refereegranskat)abstract
- Radial GaInP/AlGaInP nanowire array light-emitting diodes (LEDs) are promising candidates for novel high-efficiency solid state lighting due to their potentially large strain-free active emission volumes compared to planar LEDs. Moreover, by proper tuning of the diameter of the nanowires, the fraction of emitted light extracted can be significantly enhanced compared to that of planar LEDs. Reports so far on radial growth of nanowire LED structures, however, still point to significant challenges related to obtaining defect-free radial heterostructures. In this work, we present evidence of optically active growth-induced defects in a fairly broad energy range in vertically processed radial GaInP/AlGaInP quantum well nanowire array LEDs using a variety of complementary experimental techniques. In particular, we demonstrate strong infrared electroluminescence in a spectral range centred around 1 eV (1.2 μm) in addition to the expected red light emission from the quantum well. Spatially resolved cathodoluminescence studies reveal a patchy red light emission with clear spectral features along the NWs, most likely induced by variations in QW thickness, composition and barriers. Dark areas are attributed to infrared emission generated by competing defect-assisted radiative transitions, or to trapping mechanisms involving non-radiative recombination processes. Possible origins of the defects are discussed.
|
|
| 8. |
- Jafari Jam, R., et al.
(författare)
-
Embedded sacrificial AlAs segments in GaAs nanowires for substrate reuse
- 2020
-
Ingår i: Nanotechnology. - Bristol : Institute of Physics Publishing (IOPP). - 0957-4484 .- 1361-6528. ; 31:20
-
Tidskriftsartikel (refereegranskat)abstract
- We report on the use of a sacrificial AlAs segment to enable substrate reuse for nanowire synthesis. A silicon nitride template was deposited on a p-type GaAs substrate. Then a pattern was transferred to the substrate by nanoimprint lithography and reactive ion etching. Thermal evaporation was used to define Au seed particles. Metalorganic vapour phase epitaxy was used to grow AlAs-GaAs NWs in the vapour-liquid-solid growth mode. The yield of synthesised nanowires, compared to the number expected from the patterned template, was more than 80%. After growth, the nanowires were embedded in a polymer and mechanically removed from the parent substrate. The parent substrate was then immersed in an HCl:H2O (1:1) mixture to dissolve the remaining stub of the sacrificial AlAs segment. The pattern fidelity was preserved after peeling off the nanowires and cleaning, and the semiconductor surface was flat and ready for reuse. Au seed particles were then deposited on the substrate by use of pulse electrodeposition, which was selective to the openings in the growth template, and then nanowires were regrown. The yield of regrowth was less optimal compared to the first growth but the pattern was preserved. Our results show a promising approach to reduce the final cost of III-V nanowire based solar cells. © 2020 The Author(s). Published by IOP Publishing Ltd.
|
|
| 9. |
- Jeffet, Jonathan, et al.
(författare)
-
Super-Resolution Genome Mapping in Silicon Nanochannels
- 2016
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 10:11, s. 9823-9830
-
Tidskriftsartikel (refereegranskat)abstract
- Optical genome mapping in nanochannels is a powerful genetic analysis method, complementary to deoxyribonucleic acid (DNA) sequencing. The method is based on detecting a pattern of fluorescent labels attached along individual DNA molecules. When such molecules are extended in nanochannels, the labels create a fluorescent genetic barcode that is used for mapping the DNA molecule to its genomic locus and identifying large-scale variation from the genome reference. Mapping resolution is currently limited by two main factors: the optical diffraction limit and the thermal fluctuations of DNA molecules suspended in the nanochannels. Here, we utilize single-molecule tracking and super-resolution localization in order to improve the mapping accuracy and resolving power of this genome mapping technique and achieve a 15-fold increase in resolving power compared to currently practiced methods. We took advantage of a naturally occurring genetic repeat array and labeled each repeat with custom-designed Trolox conjugated fluorophores for enhanced photostability. This model system allowed us to acquire extremely long image sequences of the equally spaced fluorescent markers along DNA molecules, enabling detailed characterization of nanoconfined DNA dynamics and quantitative comparison to the Odijk theory for confined polymer chains. We present a simple method to overcome the thermal fluctuations in the nanochannels and exploit single-step photobleaching to resolve subdiffraction spaced fluorescent markers along fluctuating DNA molecules with ∼100 bp resolution. In addition, we show how time-averaging over just ∼50 frames of 40 ms enhances mapping accuracy, improves mapping P-value scores by 3 orders of magnitude compared to nonaveraged alignment, and provides a significant advantage for analyzing structural variations between DNA molecules with similar sequence composition.
|
|
| 10. |
- Nowakowska, Sylwia, et al.
(författare)
-
Adsorbate-Induced Modification of the Confining Barriers in a Quantum Box Array
- 2018
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 12:1, s. 768-778
-
Tidskriftsartikel (refereegranskat)abstract
- Quantum devices depend on addressable elements, which can be modified separately and in their mutual interaction. Self-assembly at surfaces, for example, formation of a porous (metal-) organic network, provides an ideal way to manufacture arrays of identical quantum boxes, arising in this case from the confinement of the electronic (Shockley) surface state within the pores. We show that the electronic quantum box state as well as the interbox coupling can be modified locally to a varying extent by a selective choice of adsorbates, here C60, interacting with the barrier. In view of the wealth of differently acting adsorbates, this approach allows for engineering quantum states in on-surface network architectures.
|
|
