| 1. |
|
|
| 2. |
|
|
| 3. |
- Nicholls, Ian A., et al.
(författare)
-
Rational design of biomimetic molecularly imprinted materials : theoretical and computational strategies for guiding nanoscale structured polymer development
- 2011
-
Ingår i: Analytical and Bioanalytical Chemistry. - : Springer Science and Business Media LLC. - 1618-2642 .- 1618-2650. ; 400:6, s. 1771-1786
-
Forskningsöversikt (refereegranskat)abstract
- In principle, molecularly imprinted polymer science and technology provides a means for ready access to nano-structured polymeric materials of predetermined selectivity. The versatility of the technique has brought it to the attention of many working with the development of nanomaterials with biological or biomimetic properties for use as therapeutics or in medical devices. Nonetheless, the further evolution of the field necessitates the development of robust predictive tools capable of handling the complexity of molecular imprinting systems. The rapid growth in computer power and software over the past decade has opened new possibilities for simulating aspects of the complex molecular imprinting process. We present here a survey of the current status of the use of in silico-based approaches to aspects of molecular imprinting. Finally, we highlight areas where ongoing and future efforts should yield information critical to our understanding of the underlying mechanisms sufficient to permit the rational design of molecularly imprinted polymers.
|
|
| 4. |
|
|
| 5. |
- Wiklander, Jesper G., 1974-, et al.
(författare)
-
Towards a synthetic avidin mimic
- 2011
-
Ingår i: Analytical and Bioanalytical Chemistry. - : Springer Science and Business Media LLC. - 1618-2642 .- 1618-2650. ; 400:5, s. 1397-1404
-
Tidskriftsartikel (refereegranskat)abstract
- A series of streptavidin-mimicking molecularly imprinted polymers has been developed and evaluated for their biotin binding characteristics. A combination of molecular dynamics and NMR spectroscopy was used to examine potential polymer systems, in particular with the functional monomers methacrylic acid and 2-acrylamidopyridine. The synthesis of copolymers of ethylene dimethacrylate and one or both of these functional monomers was performed. A combination of radioligand binding studies and surface area analyses demonstrated the presence of selectivity in polymers prepared using methacrylic acid as the functional monomer. This was predicted by the molecular dynamics studies showing the power of this methodology as a prognostic tool for predicting the behavior of molecularly imprinted polymers.
|
|
| 6. |
- Nyström-Larsson, Ingalill, 1969, et al.
(författare)
-
Materialanalys av sydsvenskt bonadsmåleri
- 2007
-
Ingår i: Rapport: Sammanfattning av Riksantikvarieämbetets seminarieserie 2007 kring pågående FoU-projekt. ; , s. 23-24
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Bonadsmåleriet hade sin storhetstid 1750-1850, och var influerat av medeltida kalkmåleri och bildvävnad i kyrkorna. Bonaderna var temporära och prydde stugorna till fest. Motiven kan vara både bibliska och profana. Materialet är tyger (återanvända och hopfogade) och senare även papper. Mot slutet av perioden övergår hantverket i massproduktion. Tidigare har bonaderna framför allt studerats inom humaniora (exempelvis etnologi) och ett naturvetenskapligt perspektiv har saknats. Därför finns mycket knapphändiga uppgifter om materialet. Syftet med projektet är att: • Kartlägga materialanvändningen • Tolka och förstå materialutvecklingen • Klarlägga innehållet i de otydliga trivialnamnen • Bygga upp ett referensmaterial Genomförande Ett antal frågeställningar har satts upp inför studiet: • Vilka materialval har man gjort? • Skiljer måleriteknik, färg, materialval mellan bonader, och går det att urskilja geografiska skillnader eller är det en tidsmässig utveckling? • Kan bonader attribueras utifrån materialval och färgval? • Vad är det för pigment som döljs i trivialnamnen? Skriftliga källor räcker inte för att svara på dessa frågor utan måste komplet-teras med naturvetenskapliga analyser. Diskussion kring RÄA-seminariets specifika frågeställningar På vad sätt bidrar ert projekt till kunskapsuppbyggnaden inom ert område? • Projektet är också ett pilotprojekt och den kunskap som vinns kan också appliceras på annat än bonadsmåleri. Utifrån resultaten kan man också gå vidare och titta på handelsvägar, infrastruktur etc. • En referensdatabas byggs upp och kan kanske också användas för an-nat material. På vilket sätt skulle resultaten från ert projekt kunna tillämpas mer konkret inom kulturmiljösektorn? • Ett viktigt mål är att hitta analysmetoder som inte förstör materialet, och som helst kan göras på plats så att materialet inte behöver flyttas (Raman spektroskopi). • Som konstaterades ovan kan resultaten från den kemiska analysen visa att en sådan kan komplettera traditionella historiska metoder också inom andra områden än bonadsmåleri. Frågor och öppen diskussion • Ännu har man inte hittat några speciella pigment eller färger, men analysen är inte klar. • Analysmaterialet som valts ut är signerade bonader. • Eftersom uppbyggandet av referensdatabaser är centralt i konserva-torns arbete är det viktigt att sprida resultaten av projektet.
|
|
| 7. |
- Höglund, Odd, et al.
(författare)
-
A new resorbable device for ligation of blood vessels - A pilot study
- 2011
-
Ingår i: Acta Veterinaria Scandinavica. - : Springer Science and Business Media LLC. - 0044-605X .- 1751-0147. ; 53, s. 47-
-
Tidskriftsartikel (refereegranskat)abstract
- Background: During surgery, controlled haemostasis to prevent blood loss is vital for a successful outcome. It can be difficult to ligate vessels located deep in the abdomen. A device that is easy to use and enables secure ligatures could be beneficial. Cable ties made of nylon have been used for ligation but the non-resorbable material caused tissue reactions. The objective of this study was to use a resorbable material to construct a device with a self-locking mechanism and to test its mechanical strength and ligation efficiency. Methods: The device was manufactured by injection moulding of polydioxanone, a resorbable polymer used for suture materials. Polydioxanone with inherent viscosities of 1.9 dL/g and 1.3 dL/g were tested. The device consisted of a perforated flexible band which could be pulled through a case with a locking mechanism. After a first version of the device had been tested, some improvements were made. The locking case was downsized, corners were rounded off, the band was made thicker and the mould was redesigned to produce longer devices. Tensile tests were performed with the second version. The first version of the device was used to ligate the ovarian pedicle in a euthanized dog and to test echogenicity of the device with ultrasound. Compression of vessels of the ovarian pedicle was examined by histology. Both versions of the device were tested for haemostasis of and tissue grip on renal arteries in six anaesthetised pigs. Results: The tensile strength of the flexible band of the devices with inherent viscosity of 1.9 dL/g was 50.1 +/- 5.5 N (range 35.2-62.9 N, n = 11) and the devices with inherent viscosity of 1.3 dL/g had a tensile strength of 39.8 +/- 8.1 N (range 18.6-54.2 N, n = 11). Injection moulding of the polymer with lower inherent viscosity resulted in a longer flow distance. Both versions of the device had an effective tissue grip and complete haemostasis of renal arteries was verified. The device attached to the ovarian pedicle could be seen with ultrasound, and vessel compression and occlusion were verified by histology. Conclusions: Tests of functionality of the device showed complete haemostasis and good tissue grip. Devices with a band of sufficient length were easily applied and tightened in tissue.
|
|
| 8. |
- Martinez-Sanz, Elena, et al.
(författare)
-
Bone reservoir : Injectable hyaluronic acid hydrogel for minimal invasive bone augmentation
- 2011
-
Ingår i: Journal of Controlled Release. - : Elsevier BV. - 0168-3659 .- 1873-4995. ; 152:2, s. 232-240
-
Tidskriftsartikel (refereegranskat)abstract
- A strategy has been designed to develop hyaluronic acid (HA) hydrogel for in vivo bone augmentation using minimal invasive technique. A mild synthetic procedure was developed to prepare aldehyde modified HA by incorporating an amino-glycerol side chain via amidation reaction and selective oxidation of the pendent group. This modification, upon mixing with hydrazide modified HA formed hydrazone-crosslinked hydrogel within 30 s that was stable at physiological pH. In vitro experiments showed no cytotoxicity of hydrogel with the controlled release of active bone morphogenic protein-2 (BMP-2). In vivo evaluation of this gel as a BMP-2 carrier was performed by injecting gels over the rat calvarium and showed bone formation in 8 weeks in correlation with the amount of BMP-2 loaded (0, 1 and 30 pig) within the gel. Furthermore, hydrogels with 30 Kg of BMP-2 induced less bone formation upon subcutaneous injection in comparison with subperiosteal implantation. Histological examination showed newly formed bone with a high expression of osteocalcin, osteopontin and with angiogenic bone marrow when higher BMP-2 concentration was employed. Our result suggests that novel HA hydrogels could be used as a BMP-2 carrier and can promote bone augmentation for potential orthopedic applications.
|
|
| 9. |
- Yang, Xia, et al.
(författare)
-
beta-Cyclodextrin grafted polyethyleneimine hydrogel immobilizing hydrophobically modified glucose oxidase
- 2011
-
Ingår i: International Journal of Biological Macromolecules. - : Elsevier BV. - 0141-8130 .- 1879-0003. ; 48:4, s. 661-666
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogels which release their contents in response to glucose concentration were prepared by immobilizing glucose oxidase (GOD) into beta-cyclodextrin grafted polyethyleneimine hydrogels (PEI-beta CD hydrogel). For the tight immobilization, hydrophobically modified GOD (HmGOD) was prepared by reacting GOD with palmitic acid-N-hydroxysuccinimide ester (PA-NHS) in the molar ratio of 1:40. According to trinitrobenzene sulfonic acid (TNBS) assay, five palmitic acids were covalently attached to one GOD molecule. The activity of HmGOD was about 76% of native enzyme. The swelling ratios of HmGOD loaded hydrogels increased from about 960% to 1190% in 24 h, when glucose concentration was varied from 0 to 100 mg/dl. The % release in 48 h of fluorescein isothiocyanate dextran increased from about 53% to 89%, when glucose concentration was varied in the same range. Gluconic acid, produced by the enzymatic reaction, would protonate and swell the PEI-beta CD hydrogel, leading to a higher release.
|
|
| 10. |
- Yang, Xia, et al.
(författare)
-
Effect of Hydrophobic Comonomer Content on Assembling of Poly (N-isopropylacrylamide) and Thermal Properties
- 2011
-
Ingår i: Journal of Applied Polymer Science. - : Wiley. - 0021-8995 .- 1097-4628. ; 120:4, s. 2346-2353
-
Tidskriftsartikel (refereegranskat)abstract
- Copolymers of N-isopropylacrylamide and octadecyl acrylate (PNO), of which the content of octadecyl acrylate (ODA) was 1.3% (PNO 1.5), 1.7% (PNO 2.0), and 3.0% (PNO 4.0), were prepared using a free radical reaction. Various assemblies were obtained depending on the concentration of PNOs and the contents of ODA. Hydrophobic interaction between ODA residues is likely to act as crosslinker. PNO 1.5 formed hydrogel at the concentration of 7%. With PNO 2.0, hydrogels were formed when the concentration was 5 and 7%. With PNO 4.0, the opaque gel was obtained when the concentration was 7%. Upon heating across the lower critical solution temperature, the hydrogels shrank but the opaque gel was broken down into a suspension. At 40 degrees C, the release degrees of fluorescein isothiocyanate-dextran were much smaller than those of release at 23 degrees C. The temperature-sensitive release is due to temperature-sensitive swelling ratio.
|
|
