| 1. |
- Nybacka, Mikael, et al.
(författare)
-
Project: CASTT - Centre for Automotive Systems Technologies and Testing
- 2007
-
Annan publikation (populärvet., debatt m.m.)abstract
- Through the Centre for Automotive Systems Technologies and Testing, Luleå University of Technology aims to first of all support automotive winter testing in Northern Sweden. This means to support the local automotive test entrepreneurs and through them their customers: the car manufacturers and their suppliers. To succeed in this task, the center relies on the university's areas of leading research and most importantly on the cooperation between those areas.
|
|
| 2. |
|
|
| 3. |
- Pieringer, Astrid, 1979, et al.
(författare)
-
Investigation of railway curve squeal using a combination of frequency- and time-domain models
- 2016
-
Ingår i: Proceedings of the 12h International Workshop on Railway Noise (IWRN12), Terrigal, Australia, September 12-16. ; , s. 444 - 451
-
Konferensbidrag (refereegranskat)abstract
- Railway curve squeal arises from self-excited vibrations during curving. In this paper, a frequency- and a timedomainapproach for curve squeal are compared. In particular, the capability of the frequency-domain model topredict the onset of squeal and the squeal frequencies is studied. In the frequency-domain model, linear stabilityis investigated through complex eigenvalue analysis. The time-domain model is based on a Green's functionsapproach and uses a convolution procedure to obtain the system response. To ensure comparability, the samesubmodels are implemented in both squeal models. The structural flexibility of a rotating wheel is modelled byadopting Eulerian coordinates. To account for the moving wheel‒rail contact load, the so-called moving elementmethod is used to model the track. The local friction characteristics in the contact zone is modelled inaccordance with Coulomb's law with a constant friction coefficient. The frictional instability arises due togeometrical coupling. In the time-domain model, Kalker's non-linear, non-steady state rolling contact modelincluding the algorithms NORM and TANG for normal and tangential contact, respectively, is solved in eachtime step. In the frequency-domain model, the normal wheel/rail contact is modelled by a linearization of theforce-displacement relation obtained with NORM around the quasi-static state and full-slip conditions areconsidered in tangential direction. Conditions similar to those of a curve on the Stockholm metro exposed tosevere curve squeal are studied with both squeal models. The influence of the wheel-rail friction coefficient andthe direction of the resulting creep force on the occurrence of squeal is investigated for vanishing train speed. Results from both models are similar in terms of the instability range in the parameter space and the predictedsqueal frequencies.
|
|
| 4. |
- Bayani, Mohsen, 1981
(författare)
-
Squeak and Rattle Prediction for Robust Product Development in the automotive industry
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Squeak and rattle are nonstationary, irregular, and impulsive sounds that are audible inside the car cabin. For decades, customer complaints about squeak and rattle have been, and still are, among the top quality issues in the automotive industry. These annoying sounds are perceived as quality defect indications and burden warranty costs to the car manufacturers. Today, the quality improvements regarding the persistent type of sounds in the car, as well as the increasing popularity of electric engines, as green and quiet propulsion solutions, stress the necessity for attenuating annoying sounds like squeak and rattle more than in the past. The economical and robust solutions to this problem are to be sought in the pre-design-freeze phases of the product development and by employing design-concept-related practices. To achieve this goal, prediction and evaluation tools and methods are required to deal with the squeak and rattle quality issues upfront in the product development process. The available tools and methods for the prediction of squeak and rattle sounds in the pre-design-freeze phases of a car development process are not yet sufficiently mature. The complexity of the squeak and rattle events, the existing knowledge gap about the mechanisms behind the squeak and rattle sounds, the lack of accurate simulation and post-processing methods, as well as the computational cost of complex simulations are some of the significant hurdles in this immaturity. This research addresses this problem by identifying a framework for the prediction of squeak and rattle sounds based on a cause-and-effect diagram. The main domains and the elements and the sub-contributors to the problem in each domain within this framework are determined through literature studies, field explorations and descriptive studies conducted on the subject. Further, improvement suggestions for the squeak and rattle evaluation and prediction methods are proposed through prescriptive studies. The applications of some of the proposed methods in the automotive industry are demonstrated and examined in industrial problems. The outcome of this study enhances the understanding of some of the parameters engaged in the squeak and rattle generation. Simulation methods are proposed to actively involve the contributing factors studied in this work for squeak and rattle risk evaluation. To enhance the efficiency and accuracy of the risk evaluation process, methods were investigated and proposed for the system excitation efficiency, modelling accuracy and efficiency and quantification of the response in the time and frequency domains. The demonstrated simulation methods besides the improved understanding of the mechanisms behind the phenomenon can facilitate a more accurate and robust prediction of squeak and rattle risk during the pre-design-freeze stages of the car development.
|
|
| 5. |
- Li, Xiaojian, 1991, et al.
(författare)
-
A new method for performance map prediction of automotive turbocharger compressors with both vaneless and vaned diffusers
- 2021
-
Ingår i: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. - : SAGE Publications. - 2041-2991 .- 0954-4070. ; 235:6, s. 1734-1747
-
Tidskriftsartikel (refereegranskat)abstract
- A new approach to predict the performance maps of automotive turbocharger compressors is presented. Firstly, a polynomial equation is applied to fit the experimental data of flow coefficient ratios for the centrifugal compressors with both vaneless and vaned diffusers. Based on this equation, the choke and surge flow coefficients under different machine Mach numbers can be quickly predicted. Secondly, a physically based piecewise elliptic equation is used to define compressors’ characteristic curves in terms of efficiency ratio. By introducing the flow coefficient ratio into the efficiency correlation, the empirical coefficients in the piecewise elliptic equation are uniquely calibrated by the experimental data, forming a unified algebraic equation to match the efficiency maps of the compressors with both vaneless and vaned diffusers. Then, a new universal equation, which connects the work coefficient, the impeller outlet flow coefficient and the non-dimensional equivalent impeller outlet width, is derived by using classical aerothermodynamic method. The off-design pressure ratio is predicted based on the equivalent impeller outlet width with less knowledge of the compressor geometry and no empirical coefficients. Finally, three state-of-the-art turbocharger compressors (one with vaneless diffuser, two with vaned diffusers) are chosen to validate the proposed method, and the results show a satisfactory accuracy for the performance map prediction. This method can be used for the preliminary design of turbocharger compressors with both vaneless and vaned diffusers, or to assess the design feasibility and challenges of the given design specifications.
|
|
| 6. |
- Vernersson, Tore V, 1968, et al.
(författare)
-
Wear of Railway brake block materials at elevated temperatures : pin-on-disc experiments
- 2012
-
Ingår i: Proceedings of Eurobrake 2012. - FISITA.
-
Konferensbidrag (refereegranskat)abstract
- An experimental study on a pin-on-disc rig is presented where the wear of some brake block materials at controlled elevated disc temperatures are reported. It is found for the three studied organic composite materials that the (specific) wear rate increases radically at a temperature of about 500 oC. For temperatures below 500 oC, the wear rate is found to increase with temperature. The cast iron material shows an increase of the wear rate up to 500 oC, after which a transition in the wear mechanism occurs and the wear rate is decreasing with increasing temperature. The studied sinter material shows a weak dependence of the wear rate with temperature.
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Lundberg, Oskar, 1980-
(författare)
-
On the influence of surface roughness on rolling contact forces
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Road vehicle tyres, railway wheels and ball bearings all generate rolling contact forces which are transferred within a finite area of contact between the rolling element and the substrate. Either it is visible or not for the human eye, a certain degree of roughness is always present on the contacting surfaces and it influences the generation of both vertical and lateral contactforces. The purpose of this investigation is to enhance the understanding and modelling of the influence from small-scale surface roughness on the generation of rolling contact forces. To this end, a computationally efficient method to include roughness-induced contact nonlinearities in the dynamic modelling of rolling contacts is proposed. The method is implemented in a time domain model for vertical wheel–track interaction to model rolling-induced rail vibrations, showing good agreement with measurements. Furthermore, a test rig is developed and used for the investigation of tyre–road rolling contact forces. Detailed studies are performed on the influence of substrate roughness on the resulting contact forces for a tyre tread block which is rolling at different operating conditions. The choice of substrate as well as the rolling velocity and the slip ratio is observed to have significant influence on the resulting friction coefficient. For high slip ratios, stick–slip oscillations appear, exhibiting frequency content which is largely dependent on the choice of substrate. The outcomes of this study can potentially be used to improve future tyre–road contacts with respect to wear, traction and noise generation.
|
|
| 10. |
- Torstensson, Peter, 1981, et al.
(författare)
-
Hybrid model for prediction of impact noise generated at railway crossings
- 2016
-
Ingår i: Proceedings of the 12h International Workshop on Railway Noise (IWRN12), Terrigal, Australia, September 12-16 (2016). ; , s. 539 - 545
-
Konferensbidrag (refereegranskat)abstract
- A hybrid model for the prediction of impact noise at railway crossings is presented. The hybrid model combines the simulation of vertical wheel‒rail contact force in the time domain and the prediction of sound pressure level using a linear frequency-domain model. The time-domain model uses moving Green’s functions for the vehicle and track models (accounting for wheel flexibility and a discretely supported rail with space-variant beam properties) and a non-Hertzian wheel‒rail contact model. The time-domain and frequency-domain models are coupled based on the concept of an equivalent roughness spectrum. The model is demonstrated by investigating the influence of axle load, vehicle speed and wheel profile on generated impact noise levels. A negligible influence on impact noise is observed for axle loads in the interval 15 – 25 tonnes. On the other hand, increasing vehicle speed from 80 km/h to 150 km/h, or comparing a nominal S1002 wheel profile with a severely hollow worn profile, result in substantially higher levels of impact noise; for the given wheel and track conditions the differences are in the order of 10 dB(A).
|
|
