| 1. |
- Bar, Laure, et al.
(författare)
-
Impact of antigen density on recognition by monoclonal antibodies
- 2020
-
Ingår i: Analytical Biochemistry. - : American Chemical Society (ACS). - 0003-2697 .- 1096-0309 .- 0003-2700 .- 1520-6882. ; 92:7, s. 5396-5403
-
Tidskriftsartikel (refereegranskat)abstract
- Understanding antigen–antibody interactions is important to many emerging medical and bioanalytical applications. In particular, the levels of antigen expression at the cell surface may determine antibody-mediated cell death. This parameter has a clear effect on outcome in patients undergoing immunotherapy. In this context, CD20 which is expressed in the membrane of B cells has received significant attention as target for immunotherapy of leukemia and lymphoma using the monoclonal antibody rituximab. To systematically study the impact of CD20 density on antibody recognition, we designed self-assembled monolayers that display tunable CD20 epitope densities. For this purpose, we developed in situ click chemistry to functionalize SPR sensor chips. We find that the rituximab binding affinity depends sensitively and nonmonotonously on CD20 surface density. Strongest binding, with an equilibrium dissociation constant (KD = 32 nM) close to values previously reported from in vitro analysis with B cells (apparent KD between 5 and 19 nM), was obtained for an average inter-antigen spacing of 2 nm. This distance is required for improving rituximab recognition, and in agreement with the known requirement of CD20 to form clusters to elicit a biological response. More generally, this study offers an interesting outlook in the understanding of the necessity of epitope clusters for effective mAb recognition.
|
|
| 2. |
- Nordström, Anders, et al.
(författare)
-
Nonlinear data alignment for UPLC-MS and HPLC-MS based metabolomics : quantitative analysis of endogenous and exogenous metabolites in human serum.
- 2006
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 78:10, s. 3289-95
-
Tidskriftsartikel (refereegranskat)abstract
- A nonlinear alignment strategy was examined for the quantitative analysis of serum metabolites. Two small-molecule mixtures with a difference in relative concentration of 20-100% for 10 of the compounds were added to human serum. The metabolomics protocol using UPLC and XCMS for LC-MS data alignment could readily identify 8 of 10 spiked differences among more than 2700 features detected. Normalization of data against a single factor obtained through averaging the XCMS integrated response areas of spiked standards increased the number of identified differences. The original data structure was well preserved using XCMS, but reintegration of identified differences in the original data reduced the number of false positives. Using UPLC for separation resulted in 20% more detected components compared to HPLC. The length of the chromatographic separation also proved to be a crucial parameter for a number of detected features. Moreover, UPLC displayed better retention time reproducibility and signal-to-noise ratios for spiked compounds over HPLC, making this technology more suitable for nontargeted metabolomics applications.
|
|
| 3. |
- Abikhodr, A. H., et al.
(författare)
-
Identifying Mixtures of Isomeric Human Milk Oligosaccharides by the Decomposition of IR Spectral Fingerprints
- 2021
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 93:44, s. 14730-14736
-
Tidskriftsartikel (refereegranskat)abstract
- The analysis of glycans presents a significant challenge that arises from their isomeric heterogeneity. While high-resolution ion mobility spectrometry (IMS) has shown the ability to resolve subtly different glycan isomers, their unambiguous assignment remains difficult. Here, we demonstrate an infrared (IR) spectroscopic approach for identifying isomers in a glycan mixture. To display the feasibility of this approach, we have constructed a small database of cryogenic spectra of five lacto-N-fucopentaose (LNFP) and six disaccharide isomers and demonstrated that in the cases where they cannot be separated by IMS, we can use a cryogenic IR spectrum to identify the isomeric components of a mixture.
|
|
| 4. |
- Abrahamsson, Christoffer, et al.
(författare)
-
Time-resolved NIR spectroscopy for quantitative analysis of intact pharmaceutical tablets
- 2005
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 1520-6882 .- 0003-2700. ; 77:4, s. 1055-1059
-
Tidskriftsartikel (refereegranskat)abstract
- Near-infrared (NIR) spectroscopy is a useful technique for quantitative measurements of intact tablets, but it suffers from limitations due to the fact that changes in the physical properties of a sample strongly affect the recorded spectrum. In this work, time-resolved transmission NIR spectroscopy was utilized to conduct quantitative measurements of intact tablets. The technique enables separation of the absorption properties of the sample from the scattering properties and can therefore handle changes of the physical parameters of the samples in a better way than conventional NIR transmission spectroscopy. The experiments were conducted using a pulsed Ti:sapphire laser coupled into a nonlinear photonic crystal fiber as light source. The light transmitted through the sample was measured by a time-resolving streak camera. A comparison of the results from the time-resolved technique with the results from conventional transmission NIR spectroscopy was made using tablets containing different concentrations of iron oxide and manufactured with different thicknesses. A PLS model made with data from the time-resolved technique predicted samples 5 times better than a PLS model made data from the conventional NIR transmission technique. Furthermore, an improvement to predict samples with physical properties outside those included in the calibration set was demonstrated.
|
|
| 5. |
- Acero Sanchez, Josep Ll., et al.
(författare)
-
Electrochemical Genetic Profiling of Single Cancer Cells
- 2017
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 89:6, s. 3378-3385
-
Tidskriftsartikel (refereegranskat)abstract
- Recent understandings in the development and spread of cancer have led to the realization of novel single cell analysis platforms focused on circulating tumor cells (CTCs). A simple, rapid, and inexpensive analytical platform capable of providing genetic information on these rare cells is highly desirable to support clinicians and researchers alike to either support the selection or adjustment of therapy or provide fundamental insights into cell function and cancer progression mechanisms. We report on the genetic profiling of single cancer cells, exploiting a combination of multiplex ligation-dependent probe amplification (MLPA) and electrochemical detection. Cells were isolated using laser capture and lysed, and the mRNA was extracted and transcribed into DNA. Seven markers were amplified by MLPA, which allows for the simultaneous amplification of multiple targets with a single primer pair, using MLPA probes containing unique barcode sequences. Capture probes complementary to each of these barcode sequences were immobilized on a printed circuit board (PCB) manufactured electrode array and exposed to single-stranded MLPA products and subsequently to a single stranded DNA reporter probe bearing a HRP molecule, followed by substrate addition and fast electrochemical pulse amperometric detection. We present asimple, rapid, flexible, and inexpensive approach for the simultaneous quantification of multiple breast cancer related mRNA markers, with single tumor cell sensitivity.
|
|
| 6. |
|
|
| 7. |
- Adams, Kelly L., et al.
(författare)
-
Steady-State Electrochemical Determination of Lipidic Nanotube Diameter Utilizing an Artificial Cell Model
- 2010
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 1520-6882 .- 0003-2700. ; 82:3, s. 1020-1026
-
Tidskriftsartikel (refereegranskat)abstract
- By exploiting the capabilities of steady-state electrochemical measurements, we have measured the inner diameter of a lipid nanotube using Fick’s first law of diffusion in conjunction with an imposed linear concentration gradient of electroactive molecules over the length of the nanotube. Fick’s law has been used in this way to provide a direct relationship between the nanotube diameter and the measurable experimental parameters Δi (change in current) and nanotube length. Catechol was used to determine the Δi attributed to its flux out of the nanotube. Comparing the nanotube diameter as a function of nanotube length revealed that membrane elastic energy was playing an important role in determining the size of the nanotube and was different when the tube was connected to either end of two vesicles or to a vesicle on one end and a pipet tip on the other. We assume that repulsive interaction between neck regions can be used to explain the trends observed. This theoretical approach based on elastic energy considerations provides a qualitative description consistent with experimental data.
|
|
| 8. |
- Adler, Belinda, et al.
(författare)
-
Miniaturized and Automated High-Throughput Verification of Proteins in the ISET Platform with MALDI MS
- 2012
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 84:20, s. 8663-8669
-
Tidskriftsartikel (refereegranskat)abstract
- A major bottleneck in high-throughput protein production is the validation step, which is why parallel and automated sample processing methods are highly desirable. Also, a miniaturized sample preparation format is preferred, as the reduction of reagent volumes significantly decreases the analysis cost per sample. We have developed an automated and miniaturized protein sequence verification protocol for recombinant proteins utilizing peptide mass fingerprinting and MS/MS analysis. The integrated selective enrichment target (ISET) platform, previously developed in our group, with its dual functionality, being both a sample preparation platform and a MALDI target plate, is employed. All steps including immobilized metal ion affinity chromatography of protein on cobalt-loaded beads, tryptic digestion, and MALDI MS analysis are performed in an array format, without any sample transfers, on the same ISET chip. The automated configuration reduced the sample preparation time significantly. Starting with crude lysate, a full plate of 48 purified, digested samples prepared for MALDI-MS can be generated in 4 h, with only 30 min of operator involvement. This paper demonstrates the utility of the method by parallel analysis of 45 His-tagged human recombinant proteins.
|
|
| 9. |
- Aeppli, Christoph, et al.
(författare)
-
Direct compound-specific stable chlorine isotope analysis of organic compounds with quadrupole GC/MS using standard isotope bracketing
- 2010
-
Ingår i: Analytical Chemistry. - Columbus, OH : American Chemical Society. - 0003-2700 .- 1520-6882. ; 82:1, s. 420-426
-
Tidskriftsartikel (refereegranskat)abstract
- A method has been developed for the direct determination of the stable chlorine isotope composition (delta(37)Cl) of organochlorines that eliminates sample preparation, achieves precision comparable to earlier techniques while improving the sensitivity, and makes use of benchtop gas chromatography-quadrupole mass spectrometry instruments (GCqMS). The method is based on the use of multiple injections (n = 8-10) of the sample, bracketed by a molecularly identical isotopic standard with known delta(37)Cl, determined using off-line thermal ionization mass spectrometry (TIMS). Mass traces of two isotopologues differing by one chlorine isotope were used to calculate delta(37)Cl values. Optimization of mass spectrometry and peak integration parameters as well as method validation was achieved using tetrachloroethene (PCE), p,p'-dichlorodiphenyltrichloroethane (DDT), and pentachlorophenol (PCP), spanning a delta(37)Cl range of -5.5 to +3.2 per thousand vs SMOC. Injecting 1.6-1100 pmol resulted in standard deviations (1sigma) of 0.6-1.3 per thousand, and the delta(37)Cl results agreed with values independently measured with TIMS. The method was tested by determining the Rayleigh fractionation during evaporation of pure liquid PCE, resulting in a chlorine isotopic enrichment factor of epsilon(Cl) = -1.1 +/- 0.4 per thousand. Furthermore, position-specific delta(37)Cl analysis based on analysis of DDT mass fragments was evaluated. The GCqMS-delta(37)Cl method offers a simplified yet sensitive approach for compound-specific chlorine isotope analysis.
|
|
| 10. |
|
|
| 11. |
- Aerts, Jordan, et al.
(författare)
-
Zero-Degree Celsius Capillary Electrophoresis Electrospray Ionization for Hydrogen Exchange Mass Spectrometry
- 2023
-
Ingår i: Analytical Chemistry. - : Springer Nature. - 0003-2700 .- 1520-6882. ; 95:2, s. 1149-1158
-
Tidskriftsartikel (refereegranskat)abstract
- Currently, fast liquid chromatographic separations at low temperatures are exclusively used for the separation of peptides generated in hydrogen deuterium exchange (HDX) workflows. However, it has been suggested that capillary electrophoresis may be a better option for use with HDX. We performed in solution HDX on peptides and bovine hemoglobin (Hb) followed by quenching, pepsin digestion, and cold capillary electrophoretic separation coupled with mass spectrometry (MS) detection for benchmarking a laboratory-built HDX–MS platform. We found that capillaries with a neutral coating to eliminate electroosmotic flow and adsorptive processes provided fast separations with upper limit peak capacities surpassing 170. In contrast, uncoated capillaries achieved 30% higher deuterium retention for an angiotensin II peptide standard owing to faster separations but with only half the peak capacity of coated capillaries. Data obtained using two different separation conditions on peptic digests of Hb showed strong agreement of the relative deuterium uptake between methods. Processed data for denatured versus native Hb after deuterium labeling for the longest timepoint in this study (50,000 s) also showed agreement with subunit interaction sites determined by crystallographic methods. All proteomic data are available under DOI: 10.6019/PXD034245.
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
- Agarwal, A., et al.
(författare)
-
Control of the Release of Freely Diffusing Molecules in Single-Cell Electroporation
- 2009
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 81:19, s. 8001-8008
-
Tidskriftsartikel (refereegranskat)abstract
- Single-cell electroporation using an electrolyte-filled capillary is an emerging technique for transient pore formation in adherent cells. Because adherent cells do not have a simple and consistent shape and because the electric field emanating from the tip of the capillary is inhomogeneous, the Schwan equation based on spherical cells in homogeneous electrical fields does not apply. We sought to determine experimental and cell parameters that influence the outcome of a single-cell electroporation experiment. A549 cells were exposed to the thiol-reactive dye Thioglo-1, leading to green fluorescence from intracellular thiol adducts. Electroporation causes a decrease with time of the intracellular fluorescence intensity of Thioglo-1-loaded cells from diffusive loss of thiol adducts. The transient curves thus obtained are well-described by a simple model originally developed by Puc et al. We find that the final fluorescence following electroporation is related to the capillary tip-to-cell distance and cell size (specifically, 2(A/pi)(1/2) where A is the area of the cell's image in pixels. This quantity is the diameter if the image is a circle). In separate experiments, the relationship obtained can be used to control the final fluorescence following electroporation by adjusting the tip-to-cell distance based on cell size. The relationship was applied successfully to A549 as Well as DU 145 and PC-3 cells. Finally, F-tests show that the variability in the final fluorescence (following electroporation) is decreased when the tip-to-cell distance is controlled according to the derived relationship in comparison to experiments in which the tip-cell distance is a constant irrespective of cell size.
|
|
| 17. |
- Agarwal, A., et al.
(författare)
-
Effect of cell size and shape on single-cell electroporation
- 2007
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 79:10, s. 3589-3596
-
Tidskriftsartikel (refereegranskat)abstract
- Single-cell electroporation was performed using electrolyte-filled capillaries on fluorescently labeled A549 cells. Cells were exposed to brief pulses (50-300 ms) at various cell-capillary tip distances. Cell viability and electroporation success were measured. In order to understand the variability in single-cell electroporation, logistic regression was used to determine whether the probabilities of cell survival and electroporation depend on experimental conditions and cell properties. Both experimental conditions and cell properties (size and shape) have a significant effect on the outcome. Finite element simulations were used to compare bulk electroporation to single-cell electroporation in terms of cell size and shape. Cells are more readily permeabilized and are more likely to survive if they are large and hemispherical as opposed to small and ellipsoidal with a high aspect ratio. The dependence of the maximum transmembrane potential across the cell membrane on cell size is much weaker than it is for bulk electroporation. Observed survival probabilities are related to the calculated fraction of the cell's surface area that is electroporated. Observed success of electroporation is related to the maximum transmembrane potential achieved.
|
|
| 18. |
- Agarwal, A., et al.
(författare)
-
Simultaneous maximization of cell permeabilization and viability in single-cell electroporation using an electrolyte-filled capillary
- 2007
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 79:1, s. 161-167
-
Tidskriftsartikel (refereegranskat)abstract
- A549 cells were briefly exposed to Thioglo-1, which converts thiols to fluorescent adducts. The fluorescent cells were exposed to short (50-300 ms) electric field pulses (500 V across a 15 cm capillary) created at the tip of an electrolyte-filled capillary. Fluorescence microscopy revealed varying degrees of cell permeabilization depending on the conditions. Longer pulses and a shorter cell-capillary tip distance led to a greater decrease in the cell's fluorescence. Live/dead (calcein AM and propidium iodide) testing revealed that a certain fraction of cells died. Longer pulses and shorter cell-capillary tip distances were more deadly. An optimum condition exists at a cell-capillary tip distance of 3.5-4.5 mu m and a pulse duration of 120-150 ms. At these conditions, > 90% of the cells are permeabilized and 80-90% survive.
|
|
| 19. |
- Agmo Hernández, Víctor, et al.
(författare)
-
Label-Free Characterization of Peptide-Lipid Interactions Using Immobilized Lipodisks
- 2013
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 85:15, s. 7377-7384
-
Tidskriftsartikel (refereegranskat)abstract
- Lipodisks, planar lipid bilayer structures stabilized by PEG-ylated lipids, were in the present study covalently bound and immobilized onto sensors for quartz crystal microbalance with dissipation monitoring (QCM-D) studies. It is shown that the modified sensors can be used to characterize the interaction of lipodisks with α-helical amphiphilic peptides with an accuracy similar to that obtained with well established fluorimetric approximations. The method presented has the great advantage that it can be used with peptides in their native form even if no fluorescent residues are present. The potential of the method is illustrated by determining the parameters describing the association of melittin, mastoparan X, and mastoparan with immobilized lipodisks. Both thermodynamic and kinetic analyses are possible. The presented method constitutes a useful tool for fundamental studies of peptide–membrane interactions and can also be applied to optimize the design of lipodisks, for example, for sustained release of antimicrobial peptides in therapeutic applications.
|
|
| 20. |
- Ahn, Ji-Young, et al.
(författare)
-
Sol-Gel Derived Nanoporous Compositions for Entrapping Small Molecules and Their Outlook toward Aptamer Screening
- 2012
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 1520-6882 .- 0003-2700. ; 84:6, s. 2647-2653
-
Tidskriftsartikel (refereegranskat)abstract
- This paper reports for the first time the application of sol-gel microarrays for immobilizing nonsoluble small chemicals (Bisphenol-A; BPA). Also, known problems of sol-gel adhesion to conventional microtiter well plate substrates are circumvented by anchoring the sol-gel microspots to a porous silion surface so-called, PS-SG chips. We confirmed low molecular weight chemical immobilization inside a sol-gel network using fluorescein. BPA and the BPA specific aptamer were utilized as a model pair to verify the affinity specific interaction in the PS-SG selection system. The aptamer interacted specifically with BPA in the sol-gel spots, as shown in microarrays forming the letters "L", "U", "N", and "D". Moreover, the bound aptamer was released by heat, recovered, and verified by gel electrophoresis. The developed PS-SG chip platform will be used for screening aptamers against numerous small molecules such as toxins, metabolites, or pesticide residues.
|
|
| 21. |
- Ainla, Alar, 1982, et al.
(författare)
-
A Microfluidic Diluter Based on Pulse Width Flow Modulation
- 2009
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 81:13, s. 5549-5556
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate that pulse width flow modulation (PWFM) can be used to design fasts accurate, and precise multi-stage dilution modules for microfluidic devices. The PWFM stage unit presented here yields 10-fold dilution, but several PWFM stages can be connected in series to yield higher-order dilutions. We have combined two stages in a device thus capable of diluting up to 100-fold, and we have experimentally determined a set of rules that can be conveniently utilized to design multistage diluters. Microfabrication with resist-based molds yielded geometrical channel height variances of 7% (22.9(16) mu m) with corresponding hydraulic resistance variances of similar to 20%. Pulsing frequencies, channel lengths, and flow pressures can be chosen within a wide range to establish the desired diluter properties. Finally, we illustrate the benefits of on-chip dilution in an example application where we investigate the effect of the Ca2+ concentration on a phospholipid bilayer spreading from a membrane reservoir onto a SiO2 surface. This is one of many possible applications where flexible concentration control is desirable.
|
|
| 22. |
- Ainla, Alar, 1982, et al.
(författare)
-
A Microfluidic Pipette for Single-Cell Pharmacology
- 2010
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 82:11, s. 4529-4536
-
Tidskriftsartikel (refereegranskat)abstract
- We report on a free-standing microfluidic pipette made in poly(dimethylsiloxane) having a circulating liquid tip that generates a self-con-fining volume in front of the outlet channels. The method is flexible and scalable as the geometry and the size of the recirculation zone is defined by pressure, channel number, and geometry. The pipette is capable of carrying out a variety of complex fluid processing operations, such as mixing, multiplexing, or gradient generation at selected cells in cell and tissue cultures. Using an uptake assay, we show that it is possible to generate dose response curves in situ from adherent Chinese hamster ovary cells expressing proton-activated human transient receptor potential vanilloid (hTRPV1) receptors. Using confined superfusion and cell stimulation, we could activate hTRPV1 receptors in single cells, measure the response by a patch-clamp pipette, and induce membrane bleb formation by exposing selected groups of cells to formaldehyde/dithiothreitol-containing solutions, respectively. In short, the microfluidic pipette allows for complex, contamination-free multiple-compound delivery for pharmacological screening of intact adherent cells.
|
|
| 23. |
- Akter, Farhima, et al.
(författare)
-
Detection of Antigens Using a Protein-DNA Chimera Developed by Enzymatic Covalent Bonding with phiX Gene A
- 2012
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 84:11, s. 5040-5046
-
Tidskriftsartikel (refereegranskat)abstract
- The chemical reactions used to make antibody DNA conjugates in many immunoassays diminish antigen-binding activity and yield heterogeneous products. Here, we address these issues by developing an antibody-based rolling circle amplification (RCA) strategy using a fusion of phi X174 gene A* protein and Z(mab2s) (A*-Zmab). The phi X174 gene A* protein is an enzyme that can covalently link with DNA, while the Z(mab2s) protein moiety can bind to specific species of antibodies. The DNA in an A*-Zmab conjugate was attached to the A* protein at a site chosen to not interfere with protein function, as determined by enzyme-linked immunosorbent assay (ELISA) and gel mobility shift analysis. The novel A*-Zmab-DNA conjugate retained its binding capabilities to a specific class of murine immunoglobulin gamma 1 (IgG1) but not to rabbit IgG. This indicates the generality of the A*-Zmab-based immuno-RCA assay that can be used in-sandwich ELISA format. Moreover, the enzymatic covalent method dramatically increased the yields of A*-Zmab-DNA conjugates up to 80% after a 15 min reaction. Finally, sensitive detection of human interferon-gamma (IFN-gamma) was achieved by immuno-RCA using our fusion protein in sandwich ELISA format. This new approach of the use of site-specific enzymatic DNA conjugation to proteins should be applicable to fabrication of novel immunoassays for biosensing.
|
|
| 24. |
- Al-Amin, Rasel A., PhD student, 1983-, et al.
(författare)
-
Sensitive Measurement of Drug-Target Engagement by a Cellular Thermal Shift Assay with Multiplex Proximity Extension Readout
- 2021
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 93:31, s. 10999-11009
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The ability to monitor target engagement in cellular contexts is a key for successful drug discovery and also valuable in clinical routine. A cellular thermal shift assay (CETSA) provides realistic information about drug binding in cells and tissues, revealing drug-target engagement in clinically relevant samples. The CETSA combined with mass spectrometry (MS) detection can be applied in the early hit identification phase to generate target engagement data for large sets of proteins. However, the analysis is slow, requires substantial amounts of the sample material, and often misses proteins of specific interest. Here, we combined the CETSA and the multiplex proximity extension assay (PEA) for analysis of target engagement of a set of 67 proteins from small amounts of the sample material treated with kinase inhibitors. The results were concordant with the corresponding analyses read out via MS. Our approach allows analyses of large numbers of specific target proteins at high sensitivity in limited sample aliquots. Highly sensitive multiplex CETSA-PEA assays are therefore promising for monitoring drug-target engagement in small sample aliquots in the course of drug development and potentially in clinical settings.
|
|
| 25. |
- Al-Amin, Rasel Abdullah, Researcher, 1983-, et al.
(författare)
-
Sensitive protein detection using site-specifically oligonucleotide-conjugated nanobody reagents
- 2022
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 98:28, s. 10054-10061
-
Tidskriftsartikel (refereegranskat)abstract
- High-quality affinity probes are critical for sensitive and specific protein detection, in particular for detection of protein biomarkers in the early phases of disease development. Proximity extension assays (PEAs) have been used for high-throughput multiplexed protein detection of up to a few thousand different proteins in one or a few microliters of plasma. Clonal affinity reagents can offer advantages over the commonly used polyclonal antibodies (pAbs) in terms of reproducibility and standardization of such assays. Here, we explore nanobodies (Nbs) as an alternative to pAbs as affinity reagents for PEA. We describe an efficient site-specific approach for preparing high-quality oligo-conjugated Nb probes via enzyme coupling using Sortase A (SrtA). The procedure allows convenient removal of unconjugated affinity reagents after conjugation. The purified high-grade Nb probes were used in PEA, and the reactions provided an efficient means to select optimal pairs of binding reagents from a group of affinity reagents. We demonstrate that Nb-based PEA (nano-PEA) for interleukin-6 (IL6) detection can augment assay performance, compared to the use of pAb probes. We identify and validate Nb combinations capable of binding in pairs without competition for IL6 antigen detection by PEA.
|
|
