| 1. |
|
|
| 2. |
- Akselsson, Roland, et al.
(författare)
-
Particle Size Distribution and Human Respiratory Deposition of Trace Metals in Indoor Work Environments
- 1976
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162. ; 19:3-4, s. 225-238
-
Tidskriftsartikel (refereegranskat)abstract
- Respiratory response to inhalation of fine particles has been investigated for the aerosol generated by welding. Particles were sampled using a pair of 5-stage cascade impactors operating at 1 l./min flow rate. The subject exhaled into one impactor through an air ballast arrangement, and the other impactor simultaneously sampled the surrounding air. Particle size fractions were analyzed for principal elemental constituents from sulphur to lead using proton induced X-ray emission, PIXE. The results indicated a complex respiratory response, including both increase in particle size due to exposure to high humidity in the respiratory tract and deposition of particles during inhalation. The response was found to be different for the element group Mn, Cr, Fe, Ni compared to the group K, Ca, Ti by observing the associations among the elements as a function of particle size in the inhaled and exhaled aerosol. However, for respiratory deposition efficiency alone in all runs averaged together, no systematic differences between the different elements are demonstrated at the 99 % confidence level.
|
|
| 3. |
- Andersson, Ing-Marie, et al.
(författare)
-
What pupils in vocational schools learn about risk at work
- 2015
-
Ingår i: The Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Negative health effects because of poor work environment is more common among young workers compared to older. One explanation might be that younger ones have a low awareness of risk, a lack of safety training, and inadequate introductions to the work. A study has been made focusing on the pupils in vocational schools knowledge and experiences about potential work environment risks in their future work. Questionnaires were distributed to 239 pupils in ten Swedish upper secondary schools’ graduating classes in four vocational programs focusing on basic knowledge about health risks at work as well as the work environment legislation. The programs were the Industrial Technology Program, the Restaurant Management and Food Program, the Transport Program, and the Handicraft Program (in which students specialize in wood). The results from the questionnaires were followed up with focus group discussions. The results showed that the pupils in general had limited knowledge that employers must, by law, conduct risk analyses and prevent risks. It was common that they mentioned themselves as the main responsible to work safe and was not clear about the employers’ duty to arrange for safe work. Pupils in all programs mentioned acute risk as the biggest risk at work. It was concluded that a systematic approach to pupils’ training in work environment is lacking. The results indicates a clear gap between what knowledge the pupils are offered and what’s intended by laws as well as state-of-the-art in occupational health risk research.
|
|
| 4. |
- Andersson, Lena, et al.
(författare)
-
Estimating trends in quartz exposure in Swedish iron foundries : predicting past and present exposures
- 2012
-
Ingår i: Annals of Occupational Hygiene. - Oxford, United Kingdom : Oxford University Press. - 0003-4878 .- 1475-3162. ; 56:3, s. 362-372
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Swedish foundries have a long tradition of legally required surveys in the work place that, from the late 1960s onwards, included measurements of quartz. The availability of exposure data spanning almost 40 years presents a unique opportunity to study trends over that time and to evaluate the validity of exposure models based on data from shorter time spans. The aims of this study were (i) to investigate long term trends in quartz exposure over time, (ii) using routinely collected quartz exposure measurements to develop a mathematical model that could predict both historical and current exposure patterns, and (iii) to validate this exposure model with up-to-date measurements from a targeted survey of the industry.Methods: Eleven foundries, representative of the Swedish iron foundry industry, were divided into three groups based on the size of the companies, i.e. the number of employees. A database containing 2333 quartz exposure measurements for 11 different job descriptionswas used to create three models that covered time periods which reflected different work conditions and production processes: a historical model (1968– 1989), a development model (1990–2004), and a validation model (2005–2006). A linear mixed model for repeated measurements was used to investigate trends over time. In all mixed models, time period, company size, and job title were included as fixed (categorical) determinants of exposure. The within- and between-worker variances were considered to be random effects. A linear regression analysis was erformed to investigate agreement between the models. The average exposure was estimated for each combination of job title and company size.Results: A large reduction in exposure (51%) was seen between 1968 and 1974 and between 1975 and 1979 (28%). In later periods, quartz exposure was reduced by 8% per 5 years at best. In the first period, employees at smaller companies experienced ~50%higher exposure levels than those at large companies, but these differences became much smaller in later years. The furnace and ladle repair job were associated with the highest exposure, with 3.9–8.0 times the average exposure compared to the lowest exposed group. Without adjusting for this autonomous trend over time, predicting early historical exposures using our development model resulted in a statistically significant regression coefficient of 2.42 (R2 5 0.81), indicating an underestimation of historical exposure levels. Similar patterns were seen for other historical time periods. Comparing our development model with our validation model resulted in a statistically significant regression coefficient of 0.31, indicating an overestimation of current exposure levels.Conclusion: To investigate long-term trends in quartz exposure over time, overall linear trends can be determined by using mixed model analysis. To create individual exposure measures to predict historical exposures, it is necessary to consider factors such as the time period, type of job, type of company, and company size. The mixed model analysis showed systematic changes in concentration levels, implying that extrapolation of exposure estimates outside the range of years covered by measurements may result in underestimation or overestimation of exposure.
|
|
| 5. |
- Antonsson, Ann-Beth, 1956-, et al.
(författare)
-
Fatal Carbon Monoxide Intoxication After AcetyleneGas Welding of Pipes
- 2013
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press. - 0003-4878 .- 1475-3162. ; 57:5, s. 662-666
-
Tidskriftsartikel (refereegranskat)abstract
- Acetylene gas welding of district heating pipes can result in exposure to high concentrations of carbon monoxide. A fatal case due to intoxication is described. Measurements of carbon monoxide revealed high levels when gas welding a pipe with closed ends. This fatality and these measurements highlight a new hazard, which must be promptly prevented.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Arshadi, Mehrdad, et al.
(författare)
-
Emission of Volatile Aldehydes and Ketones from Wood Pellets under Controlled Conditions
- 2009
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 53, s. 797-805
-
Tidskriftsartikel (refereegranskat)abstract
- Different qualities of biofuel pellets were made from pine and spruce sawdust according to an industrial experimental design. The fatty/resin acid compositions were determined by gas chromatography-mass spectrometry for both newly produced pellets and those after 2 and 4 weeks of storage. The aldehydes/ketones compositions were determined by high performance liquid chromatography at 0, 2, and 4 weeks. The designs were analyzed for the response variables: total fatty/resin acids and total aldehydes/ketones. The design showed a strong correlation between the pine fraction in the pellets and the fatty/resin acid content but the influence decreased over storage time. The amount of fatty/resin acids decreased similar to 40% during 4 weeks. The influence of drying temperature on the aldehyde/ketone emission of fresh pellets was also shown. The amounts of emitted aldehydes/ketones generally decreased by 45% during storage as a consequence of fatty/resin acid oxidation. The matrices of individual concentrations were subjected to multivariate data analysis. This showed clustering of the different experimental runs and demonstrated the important mechanism of fatty/resin acid conversion.
|
|
| 9. |
- Bartley, D., et al.
(författare)
-
Measurement Uncertainty
- 2008
-
Ingår i: Ann. occup. Hyg.. - : Oxford University Press (OUP). ; 52, s. 413-417
-
Tidskriftsartikel (refereegranskat)
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
- Blanco, Luis E., et al.
(författare)
-
The determinants of dermal exposure ranking method (DERM) : A pesticide exposure assessment approach for developing countries
- 2008
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 52:6, s. 535-544
-
Tidskriftsartikel (refereegranskat)abstract
- A new method for assessment of dermal exposure to pesticides in subsistence farmers by use of determinants of dermal exposure is described. The method, called the determinants of dermal exposure ranking method (DERM), is a combination of checklists and expert rating assessment. Thus, determinants are listed in a form, which is used to check their presence and to assess them using a simple algorithm based on two factors, the type of transport process (T value) and the area of body surface exposed (A value). In addition, the type of clothing worn during applications is included as a protection factor. We applied the DERM to real pesticide applications, characterizing dermal exposure and comparing DERM estimates with earlier developed semiquantitative visual scores based on fluorescent tracer, the total visual score (TVS) and contaminated body area (CBA). DERM showed a very good level of agreement with both the TVS (r = 0.69, P = 0.000) and the CBA (r = 0.67, P = 0.000). DERM allowed identification of the determinants that had the highest effect on exposure and the farmers with the highest exposure. In conclusion, DERM provided information on the determinants responsible for dermal exposure in a group of subsistence farmers. This can be useful to design monitoring and preventive programs, define priorities for intervention and prioritize and select most adequate measurement strategies. DERM promises to be a low-cost easy-to-use method to assess dermal exposure to pesticides in developing country conditions.
|
|
| 13. |
- Bohgard, Mats, et al.
(författare)
-
An Analytical Procedure for Determining Chromium in Samples of Airborne Dust
- 1979
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162. ; 22:3, s. 241-251
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract in UndeterminedA method is described for assessing occupational exposures to chromium aerosols; it involves four procedures. The first, proton induced X-ray emission (PIXE), measures the total chromium,. The second, electron spectroscopy for chemical analysis (ESCA), measures the oxidation state of the particle surfaces, and the third, which uses sym-diphenylcarbazide (DPC), measures the proportion of water-soluble chromium VI. The fourth, transmission electron microscopy (TEM), provides information about the size and shape of the particles and guides the interpretation of the ESCA-data.The multielemental nature of PIXE-analysis is advantageous in eliminating the possibility of interference in the DPC-method and in eliminating chromium compounds from the tentative list of existing health hazards in the smoke. These methods were applied to the analysis of samples of fume produced in welding, and information was obtained for the amounts of soluble and insoluble chromium (III and VI) in samples of different aerosols.
|
|
| 14. |
- Burström, Lage, 1954-, et al.
(författare)
-
Vibrotactile perception and effects of short-term exposure to hand-arm vibration
- 2009
-
Ingår i: The Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162 .- 0003-4878. ; 53:5, s. 539-47
-
Tidskriftsartikel (refereegranskat)abstract
- This study clarifies whether the established frequency weighting procedure for evaluating exposure to hand-transmitted vibration can effectively evaluate the temporary changes in vibrotactile perception thresholds due to pre-exposure to vibration. In addition, this study investigates the relationship between changes of the vibrotactile perception thresholds and the normalized energy-equivalent frequency-weighted acceleration. The fingers of 10 healthy subjects, five male and five female, were exposed to vibration under 16 conditions with a combination of different frequencies, intensities, and exposure times. The vibration frequencies were 31.5 and 125 Hz and exposure lasted between 2 and 16 min. According to International Organization for Standardization (ISO) 5349-1, the energy-equivalent frequency-weighted acceleration for the experimental time of 16 min is 2.5 or 5.0 m s(-2) root-mean-square, corresponding to a 8-h equivalent acceleration, A(8), of approximately 0.5 and 0.9 m s(-2), respectively. A measure of the vibrotactile perception thresholds was conducted before the different exposures to vibration. Immediately after the vibration exposure, the acute effect was measured continuously on the exposed index finger for the first 75 s, followed by 30 s of measures every minute for a maximum of 10 min. If the subject's thresholds had not recovered, the measures continued for a maximum of 30 min with measurements taken every 5 min. Pre-exposure to vibration significantly influenced vibrotactile thresholds. This study concludes that the influence on the thresholds depends on the frequency of the vibration stimuli. Increased equivalent frequency-weighted acceleration resulted in a significant change in threshold, but the thresholds were unaffected when changes in the vibration magnitude were expressed as the frequency-weighted acceleration or the unweighted acceleration. Moreover, the frequency of the pre-vibration exposure significantly influenced (up to 25 min after exposure) recovery time of the vibrotactile thresholds. This study shows that the frequency weighting procedure in ISO 5349-1 is unable to predict the produced acute changes in the vibrotactile perception. Moreover, the results imply that the calculation of the 'energy-equivalent' frequency-weighted acceleration does not reflect the acute changes of the vibration perception thresholds due to pre-exposure to vibration. Furthermore, when testing for the vibrotactile thresholds, exposure to vibration on the day of a test might influence the results. Until further knowledge is obtained, the previous practice of 3 h avoidance of vibration exposure before assessment is recommended.
|
|
| 15. |
|
|
| 16. |
- Bye, E., et al.
(författare)
-
Quantitative Determination of Airborne Respirable Non-Fibrous alpha-Silicon Carbide by X-ray Powder Diffractometry
- 2009
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 53:4, s. 403-408
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: The purpose of the present investigation was to establish a method for the determination of airborne respirable non-fibrous silicon carbide (SiC). The main application is within the industrial production of SiC. Methods: Due to the complex airborne aerosol mixture of crystalline compounds in the SiC industry, X-ray powder diffractometry was selected as the most appropriate method. Without any international standard material for the respirable fraction of non-fibrous SiC, pure and suitable products from three SiC plants in Norway were selected. These products have a median particle diameter in the range 4.4-5.1 mu m. The method is based on thin sample technique, with the dust deposited on a polycarbonate filter. Absorption correction is done by standard procedures with the use of a silver filter, situated below the polycarbonate filter. Results: The diffraction line used for quantitative determination was selected carefully. This was done to avoid interferences from quartz, cristobalite, and graphite, which all are airborne components present in the atmosphere during the industrial process. The instrumental limit of detection for the method is 12 mu g. Conclusions: This method has been used to determine airborne non-fibrous SiC in a comprehensive ongoing project in the Norwegian SiC industry for further epidemiological studies. The method is fully applicable for compliance work.
|
|
| 17. |
|
|
| 18. |
- Bylund, Sonya H, et al.
(författare)
-
A descriptive study of women injured by hand-arm vibration
- 2002
-
Ingår i: Annals of Occupational Hygiene. - 0003-4878 .- 1475-3162. ; 46:3, s. 299-307
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study was to describe the symptoms and the prognosis of vibration injuries in women. The investigation was based on a study of 374 women who had reported an injury due to hand-arm vibration to the Social Insurance Office or had received financial compensation from the Swedish Labor Market Insurance scheme during 1988-1997. Information on, for example, self-rated health symptoms and vibration exposure was collected by means of a questionnaire. On average, the first symptoms started after 7 yr of exposure and the first visit to a doctor took place after 11 yr. Neurological symptoms developed after a shorter period of exposure compared to vascular symptoms, 6.8 and 9.2 yr, respectively. The prevalence of numbness at the time of reporting the injury was 91% and the prevalence of white fingers was reported by 54%. The occupational group with the highest prevalence of vibration injuries was dental technicians. Two thirds of the women had stopped using vibrating machines in their work. Among the women who suffered from white fingers when they reported the injury, 50% declared impairment or no improvement of the symptoms. One woman in five was retired and the same number of women had retrained due to the occupational injury.
|
|
| 19. |
- Coenen, Pieter, et al.
(författare)
-
Bias and power in group-based epidemiologic studies of low-back pain exposure and outcome : effects of study size and exposure measurement efforts
- 2015
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 59:4, s. 439-454
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: Exposure-outcome studies, for instance on work-related low-back pain (LBP), often classify workers into groups for which exposures are estimated from measurements on a sample of workers within or outside the specific study. The present study investigated the influence on bias and power in exposure-outcome associations of the sizes of the total study population and the sample used to estimate exposures.Methods: At baseline, lifting, trunk flexion, and trunk rotation were observed for 371 of 1131 workers allocated to 19 a-priori defined occupational groups. LBP (dichotomous) was reported by all workers during three years of follow-up. All three exposures were associated with LBP in this parent study (p<0.01).All 21 combinations of n=10,20,30 workers per group with an outcome, and k=1,2,3,5,10,15,20 workers actually being observed were investigated using bootstrapping, repeating each combination 10,000 times. Odds ratios (OR) with p-values were determined for each of these virtual studies. Average OR and statistical power (p<0.05 and p<0.01) was determined from the bootstrap distributions at each (n,k) combination.Results: For lifting and flexed trunk, studies including n≥20 workers, with k≥5 observed, led to an almost unbiased OR and a power >0.80 (p-level 0.05). A similar performance required n≥30 workers for rotated trunk. Small numbers of observed workers (k) resulted in biased OR, while power was, in general, more sensitive to the total number of workers (n).Conclusions: In epidemiologic studies using a group-based exposure assessment strategy, statistical performance may be sufficient if outcome is obtained from a reasonably large number of workers, even if exposure is estimated from only few workers per group.
|
|
| 20. |
- Dahlman-Höglund, Anna, 1964, et al.
(författare)
-
Endotoxin in Size-Separated Metal Working Fluid Aerosol Particles
- 2016
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 60:7, s. 836-844
-
Tidskriftsartikel (refereegranskat)abstract
- Patients with airway symptoms working in metal working industries are increasing, despite efforts to improve the environmental air surrounding the machines. Our aim was to analyse the amount of endotoxin in size-separated airborne particles of metal working fluid (MWF) aerosol, by using the personal sampler Sioutas cascade impactor, to compare filter types, and to compare the concentration of airborne endotoxin to that of the corresponding MWFs. In a pilot field study, aerosols were collected in two separate machine halls on totally 10 occasions, using glass fibre and polytetrafluoroethylene (PTFE) filters in parallel at each station. Airborne endotoxin was distributed over all size fractions. While a major part was found in the largest size fraction (72%, 2.5-10 μm), up to 8% of the airborne endotoxin was detected in the smallest size fraction (<0.25 μm). Comparing the efficiency of the filter types, a significantly higher median endotoxin level was found with glass fibres filters collecting the largest particle-size fraction (1.2-fold) and with PTFE filters collecting the smallest ones (5-fold). The levels of endotoxin in the size-separated airborne particle fractions correlated to those of the MWFs supporting the aerosol-generating machines. Our study indicates that a significant part of inhalable aerosols of MWFs consists of endotoxin-containing particles below the size of intact bacteria, and thus small enough to readily reach the deepest part of the lung. Combined with other chemical irritants of the MWF, exposure to MWF aerosols containing endotoxin pose a risk to respiratory health problems. © 2016 The Author 2016. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.
|
|
| 21. |
- Dahlman-Höglund, Anna, 1964, et al.
(författare)
-
Exposure to parvalbumin allergen and aerosols among herring processing workers.
- 2013
-
Ingår i: The Annals of occupational hygiene. - : Oxford University Press (OUP). - 1475-3162. ; 57:8, s. 1020-9
-
Tidskriftsartikel (refereegranskat)abstract
- There are increasing reports of allergies and respiratory symptoms among workers in the fish processing industry, coinciding with an increasing use of high-pressure water in the processing plants. However, few studies have measured exposure in these work environments.
|
|
| 22. |
- De Vocht, F, et al.
(författare)
-
A database of exposures in the rubber manufacturing industry: Design and quality control
- 2005
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162 .- 0003-4878. ; 49:8, s. 691-701
-
Tidskriftsartikel (refereegranskat)abstract
- The concerted action EXASRUB was initiated to create a database management system for information on occupational hygiene measurements that could be used to develop exposure models in the European rubber manufacturing industry. Quality of coding was assessed by calculating percentages of agreement and Cohen's kappa statistics (kappa) for an intra- and inter-centre recoding of randomly selected subsets of the measurements. In a 6-month period, 59 609 measurements from 523 surveys in 333 factories from as early as 1956 to 2003 were coded. The database consists primarily of measurements of N-nitrosamines (36%), rubber dust (23%), solvents (14%) and rubber fumes (10%). Coding of epidemiologically relevant information was done consistently with inter-centre kappa between 0.86 and 1.00. For occupational hygiene information, values of kappa were estimated to be between 0.67 and 1.00. The proposed method resulted in a large quantity of exposure measurements with auxiliary information of varying completeness and quality. Analyses showed that coding of epidemiologically relevant information in such a multi-centre, multi-country study was coded consistently. Larger errors however, occurred in coding of occupational hygiene information. This was primarily caused by lack of information in the primary records of measurements, emphasizing the importance of having a universal system in place to collect and store measurement information by occupational hygienists for future use.
|
|
| 23. |
- Edman, Katja, et al.
(författare)
-
Exposure assessment to alpha- and beta-pinene, delta(3)-carene and wood dust in industrial production of wood pellets
- 2003
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 47:3, s. 219-226
-
Tidskriftsartikel (refereegranskat)abstract
- The main aim of the study was to measure the exposure to monoterpenes (alpha- and beta-pinene and Delta(3)-carene) and wood dust during industrial production of wood pellets and briquettes. Additional aims were to compare the results from wood dust sampled on a filter with real time measurements using a direct reading instrument and to identify peak exposures to dust. Twenty-four men working at six companies involved in industrial production of wood pellets and briquettes participated in the study. Monoterpenes were measured by diffusive sampling and wood dust was measured as total dust. A data logger (DataRAM) was used for continuous monitoring of dust concentration for 18 of the participants. The sampling time was approximately 8 h. The personal exposure to monoterpenes ranged from 0.64 to 28 mg/m(3) and a statistically significant (Kruskal-Wallis test, P = 0.0002) difference in levels of monoterpenes for workers at different companies was seen. In the companies the personal exposure to wood dust varied between 0.16 and 19 mg/m(3) and for 10 participants the levels exceeded the present Swedish occupational exposure limit (OEL) of 2 mg/m(3). The levels of wood dust during the morning shift were significantly (Mann-Whitney test, P = 0.04) higher compared with the afternoon shift. Continuous registration of dust concentration showed peak values for several working operations, especially cleaning of truck engines with compressed air. For 24 workers in six companies involved in industrial production of wood pellets the personal exposure to monoterpenes was low and to wood dust high compared with the present Swedish OEL and previous studies in Swedish wood industries. Since the DataRAM can identify critical working tasks with high wood dust exposure a reduction in exposure levels could probably be achieved by changes in working routines and by the use of protective equipment
|
|
| 24. |
- Elfman, Lena, et al.
(författare)
-
Acute Health Effects on Planters of Conifer Seedlings Treated with Insecticides
- 2009
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 1475-3162 .- 0003-4878. ; 53:4, s. 383-390
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: The aim of this study was to assess acute health effects on planters caused by planting conifer seedlings treated with two insecticides, with active ingredients imidacloprid and cypermethrin, in comparison with untreated seedlings. Methods: The investigation was a double-blind crossover study, which included a follow-up of 19 planters over a 3-week period. During Week 1, the 19 planters handled untreated conifer seedlings while they planted imidacloprid- and cypermethrin-treated seedlings during study Week 2 and 3, respectively. Signs and symptoms of acute health effects were documented by a questionnaire, administered by the field staff, during these 3 weeks. Inflammation markers in the nasal mucous membrane were also measured as an objective test. Exposure to cypermethrin was further assessed by measuring 3-phenoxybenzoic acid (3-PBA) in urine. No validated biomarker was available to assess internal exposure to imidacloprid. Results: No clear, acute adverse health effects could be found in planters during the week of exposure to conifer seedlings treated with imidacloprid (Merit Forest) or cypermethrin (Forester), as compared to during the week of planting untreated seedlings. During the week of cypermethrin exposure, the individuals had 3-PBA values that were 12-54% higher (P < 0.05), depending on the worker, than those observed during the untreated week. There were no statistically significant correlations between the raised levels of 3-PBA and self-reported health problems. These results have been obtained during planting in late summer/early autumn and with good use of protective clothing. Conclusions: No clear, acute adverse health effects could be found in planters after exposure to conifer seedlings treated with imidacloprid (Merit Forest) or cypermethrin (Forester), as compared with planting untreated seedlings. The metabolite, 3-PBA, was found in low levels in urine and was increased after exposure to cypermethrin. However, no clear relationships could be found between exposure and reported symptoms or between elevated 3-PBA levels and reported symptoms.
|
|
| 25. |
- Elihn, Karine, et al.
(författare)
-
Ultrafine particle characteristics in seven industrial plants.
- 2009
-
Ingår i: Annals of Occupational Hygiene. - : Oxford University Press (OUP). - 0003-4878 .- 1475-3162. ; 53:5, s. 475-484
-
Tidskriftsartikel (refereegranskat)abstract
- Ultrafine particles are considered as a possible cause of some of the adverse health effects caused by airborne particles. In this study, the particle characteristics were measured in seven Swedish industrial plants, with a special focus on the ultrafine particle fraction. Number concentration, size distribution, surface area concentration, and mass concentration were measured at 10 different job activities, including fettling, laser cutting, welding, smelting, core making, moulding, concreting, grinding, sieving powders, and washing machine goods. A thorough particle characterization is necessary in workplaces since it is not clear yet which choice of ultrafine particle metric is the best to measure in relation to health effects. Job activities were given a different order of rank depending on what particle metric was measured. An especially high number concentration (130 x 10(3) cm(-3)) and percentage of ultrafine particles (96%) were found at fettling of aluminium, whereas the highest surface area concentration (up to 3800 mum(2) cm(-3)) as well as high PM10 (up to 1 mg m(-3)) and PM1 (up to 0.8 mg m(-3)) were found at welding and laser cutting of steel. The smallest geometric mean diameter (22 nm) was found at core making (geometric standard deviation: 1.9).
|
|
