| 1. |
- Abayazid, Fady, et al.
(författare)
-
A New Assessment of Bicycle Helmets: The Brain Injury Mitigation Effects of New Technologies in Oblique Impacts
- 2021
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 1573-9686 .- 0090-6964. ; 49:10, s. 2716-2733
-
Tidskriftsartikel (refereegranskat)abstract
- New helmet technologies have been developed to improve the mitigation of traumatic brain injury (TBI) in bicycle accidents. However, their effectiveness under oblique impacts, which produce more strains in the brain in comparison with vertical impacts adopted by helmet standards, is still unclear. Here we used a new method to assess the brain injury prevention effects of 27 bicycle helmets in oblique impacts, including helmets fitted with a friction-reducing layer (MIPS), a shearing pad (SPIN), a wavy cellular liner (WaveCel), an airbag helmet (Hövding) and a number of conventional helmets. We tested whether helmets fitted with the new technologies can provide better brain protection than conventional helmets. Each helmeted headform was dropped onto a 45° inclined anvil at 6.3 m/s at three locations, with each impact location producing a dominant head rotation about one anatomical axes of the head. A detailed computational model of TBI was used to determine strain distribution across the brain and in key anatomical regions, the corpus callosum and sulci. Our results show that, in comparison with conventional helmets, the majority of helmets incorporating new technologies significantly reduced peak rotational acceleration and velocity and maximal strain in corpus callosum and sulci. Only one helmet with MIPS significantly increased strain in the corpus collosum. The helmets fitted with MIPS and WaveCel were more effective in reducing strain in impacts producing sagittal rotations and a helmet fitted with SPIN in coronal rotations. The airbag helmet was effective in reducing brain strain in all impacts, however, peak rotational velocity and brain strain heavily depended on the analysis time. These results suggest that incorporating different impact locations in future oblique impact test methods and designing helmet technologies for the mitigation of head rotation in different planes are key to reducing brain injuries in bicycle accidents.
|
|
| 2. |
- Ahlström, Christer, et al.
(författare)
-
Feature Extraction for Systolic Heart Murmur Classification
- 2006
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 34:11, s. 1666-1677
-
Tidskriftsartikel (refereegranskat)abstract
- Heart murmurs are often the first signs of pathological changes of the heart valves, and they are usually found during auscultation in the primary health care. Distinguishing a pathological murmur from a physiological murmur is however difficult, why an “intelligent stethoscope” with decision support abilities would be of great value. Phonocardiographic signals were acquired from 36 patients with aortic valve stenosis, mitral insufficiency or physiological murmurs, and the data were analyzed with the aim to find a suitable feature subset for automatic classification of heart murmurs. Techniques such as Shannon energy, wavelets, fractal dimensions and recurrence quantification analysis were used to extract 207 features. 157 of these features have not previously been used in heart murmur classification. A multi-domain subset consisting of 14, both old and new, features was derived using Pudil’s sequential floating forward selection (SFFS) method. This subset was compared with several single domain feature sets. Using neural network classification, the selected multi-domain subset gave the best results; 86% correct classifications compared to 68% for the first runner-up. In conclusion, the derived feature set was superior to the comparative sets, and seems rather robust to noisy data.
|
|
| 3. |
- Ahmed, Kirstin, 1974, et al.
(författare)
-
Experimental Validation of an ITAP Numerical Model and the Effect of Implant Stem Stiffness on Bone Strain Energy
- 2020
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 1573-9686 .- 0090-6964.
-
Tidskriftsartikel (refereegranskat)abstract
- The Intraosseous Transcutaneous Amputation Prosthesis (ITAP) offers transfemoral amputees an ambulatory method potentially reducing soft tissue complications seen with socket and stump devices. This study validated a finite element (in silico) model based on an ITAP design and investigated implant stem stiffness influence on periprosthetic femoral bone strain. Results showed good agreement in the validation of the in silico model against the in vitro results using uniaxial strain gauges and Digital Image Correlation (DIC). Using Strain Energy Density (SED) thresholds as the stimulus for adaptive bone remodelling, the validated model illustrated that: (a) bone apposition increased and resorption decreased with increasing implant stem flexibility in early stance; (b) bone apposition decreased (mean change = − 9.8%) and resorption increased (mean change = 20.3%) from distal to proximal in most stem stiffness models in early stance. By engineering the flow of force through the implant/bone (e.g. by changing material properties) these results demonstrate how periprosthetic bone remodelling, thus aseptic loosening, can be managed. This paper finds that future implant designs should be optimised for bone strain under a variety of relevant loading conditions using finite element models to maximise the chances of clinical success.
|
|
| 4. |
- Arzani, Amirhossein, et al.
(författare)
-
In Vivo Validation of Numerical Prediction for Turbulence Intensity in an Aortic Coarctation
- 2012
-
Ingår i: Annals of Biomedical Engineering. - : Springer Verlag (Germany). - 0090-6964 .- 1573-9686. ; 40:4, s. 860-870
-
Tidskriftsartikel (refereegranskat)abstract
- This paper compares numerical predictions of turbulence intensity with in vivo measurement. Magnetic resonance imaging (MRI) was carried out on a 60-year-old female with a restenosed aortic coarctation. Time-resolved three-directional phase-contrast (PC) MRI data was acquired to enable turbulence intensity estimation. A contrast-enhanced MR angiography (MRA) and a time-resolved 2D PCMRI measurement were also performed to acquire data needed to perform subsequent image-based computational fluid dynamics (CFD) modeling. A 3D model of the aortic coarctation and surrounding vasculature was constructed from the MRA data, and physiologic boundary conditions were modeled to match 2D PCMRI and pressure pulse measurements. Blood flow velocity data was subsequently obtained by numerical simulation. Turbulent kinetic energy (TKE) was computed from the resulting CFD data. Results indicate relative agreement (error a parts per thousand 10%) between the in vivo measurements and the CFD predictions of TKE. The discrepancies in modeled vs. measured TKE values were within expectations due to modeling and measurement errors.
|
|
| 5. |
- Auer, M., et al.
(författare)
-
In Vitro Angioplasty of Atherosclerotic Human Femoral Arteries : Analysis of the Geometrical Changes in the Individual Tissues Using MRI and Image Processing
- 2010
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 38:4, s. 1276-1287
-
Tidskriftsartikel (refereegranskat)abstract
- Existing atherosclerotic plaque imaging techniques such as intravascular ultrasound, multidetector computed tomography, optical coherence tomography, and high-resolution magnetic resonance imaging (hrMRI) require computerized methods to separate and analyze the plaque morphology. In this work, we perform in vitro balloon angioplasty experiments with 10 human femoral arteries using hrMRI and image processing. The vessel segments contain low-grade to high-grade lesions with very different plaque compositions. The experiments are designed to mimic the in vivo situation. We use a semi-automatic image processing tool to extract the three-dimensional (3D) geometries of the tissue components at four characteristic stages of the angioplasty procedure. The obtained geometries are then used to determine geometrical and mechanical indices in order to characterize, classify, and analyze the atherosclerotic plaques by their specific geometrical changes. During inflation, three vessels ruptured via helical crack propagation. The adventitia, media, and intima did not preserve their area/volume during inflation; the area changes of the lipid pool during inflation were significant. The characterization of changes in individual 3D tissue geometries, together with tissue-specific mechanical properties, may serve as a basis for refined finite element (FE) modeling, which is key to better understand stress evolution in various atherosclerotic plaque configurations.
|
|
| 6. |
- Bahaloo, Hassan, 1983-, et al.
(författare)
-
On the failure initiation in the proximal human femur under simulated sideways fall
- 2018
-
Ingår i: Annals of Biomedical Engineering. - : Springer. - 0090-6964 .- 1573-9686. ; 46, s. 270-283
-
Tidskriftsartikel (refereegranskat)abstract
- The limitations of areal bone mineral density measurements for identifying at-risk individuals have led to the development of alternative screening methods for hip fracture risk including the use of geometrical measurements from the proximal femur and subject specific finite element analysis (FEA) for predicting femoral strength, based on quantitative CT data (qCT). However, these methods need more development to gain widespread clinical applications. This study had three aims: To investigate whether proximal femur geometrical parameters correlate with obtained femur peak force during the impact testing; to examine whether or not failure of the proximal femur initiates in the cancellous (trabecular) bone; and finally, to examine whether or not surface fracture initiates in the places where holes perforate the cortex of the proximal femur. We found that cortical thickness around the trochanteric-fossa is significantly correlated to the peak force obtained from simulated sideways falling (R 2 = 0.69) more so than femoral neck cortical thickness (R 2 = 0.15). Dynamic macro level FE simulations predicted that fracture generally initiates in the cancellous bone compartments. Moreover, our micro level FEA results indicated that surface holes may be involved in primary failure events.
|
|
| 7. |
- Bergh, Niklas, 1979, et al.
(författare)
-
A new biomechanical perfusion system for ex vivo study of small biological intact vessels
- 2005
-
Ingår i: Ann Biomed Eng. - : Springer Science and Business Media LLC. - 0090-6964. ; 33:12, s. 1808-18
-
Tidskriftsartikel (refereegranskat)abstract
- The vascular endothelium transduces physical stimuli within the circulation into physiological responses, which influence vascular remodelling and tissue homeostasis. Therefore, a new computerized biomechanical ex vivo perfusion system was developed, in which small intact vessels can be perfused under well-defined biomechanical forces. The system enables monitoring and regulation of vessel lumen diameter, shear stress, mean pressure, variable pulsatile pressure and flow profile, and diastolic reversal flow. Vessel lumen measuring technique is based on detection of the amount of flourescein over a vessel segment. A combination of flow resistances, on/off switches, and capacitances creates a wide range of pulsatile pressures and flow profiles. Accuracy of the diameter measurement was evaluated. The diameters of umbilical arteries were measured and compared with direct ultrasonographic measurement of the vessel diameter. As part of the validation the pulsatile pressure waveform was altered, e.g., in terms of pulse pressure, frequency, diastolic shape, and diastolic reversal flow. In a series of simulation experiments, the hemodynamic homeostasis functions of the system were successfully challenged by generating a wide range of vascular diameters in artificial and intact human vessels. We conclude that the system presented may serve as a methodological and technical platform when performing advanced hemodynamic stimulation protocols.
|
|
| 8. |
- Bergström, Joakim, et al.
(författare)
-
An Overview of Mechanical Properties and Material Modeling of Polylactide (PLA) for Medical Applications
- 2016
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 44:2, s. 330-340
-
Tidskriftsartikel (refereegranskat)abstract
- This article provides an overview of the connection between the microstructural state and the mechanical response of various bioresorbable polylactide (PLA) devices for medical applications. PLLA is currently the most commonly used material for bioresorbable stents and sutures, and its use is increasing in many other medical applications. The non-linear mechanical response of PLLA, due in part to its low glass transition temperature (T g ≈ 60 °C), is highly sensitive to the molecular weight and molecular orientation field, the degree of crystallinity, and the physical aging time. These microstructural parameters can be tailored for specific applications using different resin formulations and processing conditions. The stress-strain, deformation, and degradation response of a bioresorbable medical device is also strongly dependent on the time history of applied loads and boundary conditions. All of these factors can be incorporated into a suitable constitutive model that captures the multiple physics that are involved in the device response. Currently developed constitutive models already provide powerful computations simulation tools, and more progress in this area is expected to occur in the coming years.
|
|
| 9. |
- Biasetti, Jacopo, et al.
(författare)
-
Hemodynamics of the Normal Aorta Compared to Fusiform and Saccular Abdominal Aortic Aneurysms with Emphasis on a Potential Thrombus Formation Mechanism
- 2010
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 38:2, s. 380-390
-
Tidskriftsartikel (refereegranskat)abstract
- Abdominal Aortic Aneurysms (AAAs), i.e., focal enlargements of the aorta in the abdomen are frequently observed in the elderly population and their rupture is highly mortal. An intra-luminal thrombus is found in nearly all aneurysms of clinically relevant size and multiply affects the underlying wall. However, from a biomechanical perspective thrombus development and its relation to aneurysm rupture is still not clearly understood. In order to explore the impact of blood flow on thrombus development, normal aortas (n = 4), fusiform AAAs (n = 3), and saccular AAAs (n = 2) were compared on the basis of unsteady Computational Fluid Dynamics simulations. To this end patient-specific luminal geometries were segmented from Computerized Tomography Angiography data and five full heart cycles using physiologically realistic boundary conditions were analyzed. Simulations were carried out with computational grids of about half a million finite volume elements and the Carreau-Yasuda model captured the non-Newtonian behavior of blood. In contrast to the normal aorta the flow in aneurysm was highly disturbed and, particularly right after the neck, flow separation involving regions of high streaming velocities and high shear stresses were observed. Naturally, at the expanded sites of the aneurysm average flow velocity and wall shear stress were much lower compared to normal aortas. These findings suggest platelets activation right after the neck, i.e., within zones of pronounced recirculation, and platelet adhesion, i.e., thrombus formation, downstream. This mechanism is supported by recirculation zones promoting the advection of activated platelets to the wall.
|
|
| 10. |
- Cecchi, N. J., et al.
(författare)
-
Identifying Factors Associated with Head Impact Kinematics and Brain Strain in High School American Football via Instrumented Mouthguards
- 2021
-
Ingår i: Annals of Biomedical Engineering. - : Springer Nature. - 0090-6964 .- 1573-9686. ; 49:10, s. 2814-2826
-
Tidskriftsartikel (refereegranskat)abstract
- Repeated head impact exposure and concussions are common in American football. Identifying the factors associated with high magnitude impacts aids in informing sport policy changes, improvements to protective equipment, and better understanding of the brain’s response to mechanical loading. Recently, the Stanford Instrumented Mouthguard (MiG2.0) has seen several improvements in its accuracy in measuring head kinematics and its ability to correctly differentiate between true head impact events and false positives. Using this device, the present study sought to identify factors (e.g., player position, helmet model, direction of head acceleration, etc.) that are associated with head impact kinematics and brain strain in high school American football athletes. 116 athletes were monitored over a total of 888 athlete exposures. 602 total impacts were captured and verified by the MiG2.0’s validated impact detection algorithm. Peak values of linear acceleration, angular velocity, and angular acceleration were obtained from the mouthguard kinematics. The kinematics were also entered into a previously developed finite element model of the human brain to compute the 95th percentile maximum principal strain. Overall, impacts were (mean ± SD) 34.0 ± 24.3 g for peak linear acceleration, 22.2 ± 15.4 rad/s for peak angular velocity, 2979.4 ± 3030.4 rad/s2 for peak angular acceleration, and 0.262 ± 0.241 for 95th percentile maximum principal strain. Statistical analyses revealed that impacts resulting in Forward head accelerations had higher magnitudes of peak kinematics and brain strain than Lateral or Rearward impacts and that athletes in skill positions sustained impacts of greater magnitude than athletes in line positions. 95th percentile maximum principal strain was significantly lower in the observed cohort of high school football athletes than previous reports of collegiate football athletes. No differences in impact magnitude were observed in athletes with or without previous concussion history, in athletes wearing different helmet models, or in junior varsity or varsity athletes. This study presents novel information on head acceleration events and their resulting brain strain in high school American football from our advanced, validated method of measuring head kinematics via instrumented mouthguard technology.
|
|
| 11. |
- Ebrahimi, Mohammadhossein, et al.
(författare)
-
Elastic, Dynamic Viscoelastic and Model-Derived Fibril-Reinforced Poroelastic Mechanical Properties of Normal and Osteoarthritic Human Femoral Condyle Cartilage
- 2021
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 49:9, s. 2622-2634
-
Tidskriftsartikel (refereegranskat)abstract
- Osteoarthritis (OA) degrades articular cartilage and weakens its function. Modern fibril-reinforced poroelastic (FRPE) computational models can distinguish the mechanical properties of main cartilage constituents, namely collagen, proteoglycans, and fluid, thus, they can precisely characterize the complex mechanical behavior of the tissue. However, these properties are not known for human femoral condyle cartilage. Therefore, we aimed to characterize them from human subjects undergoing knee replacement and from deceased donors without known OA. Multi-step stress-relaxation measurements coupled with sample-specific finite element analyses were conducted to obtain the FRPE material properties. Samples were graded using OARSI scoring to determine the severity of histopathological cartilage degradation. The results suggest that alterations in the FRPE properties are not evident in the moderate stages of cartilage degradation (OARSI 2-3) as compared with normal tissue (OARSI 0-1). Drastic deterioration of the FRPE properties was observed in severely degraded cartilage (OARSI 4). We also found that the FRPE properties of femoral condyle cartilage related to the collagen network (initial fibril-network modulus) and proteoglycan matrix (non-fibrillar matrix modulus) were greater compared to tibial and patellar cartilage in OA. These findings may inform cartilage tissue-engineering efforts and help to improve the accuracy of cartilage representations in computational knee joint models.
|
|
| 12. |
|
|
| 13. |
- Fahlstedt, Madelen, 1983-, et al.
(författare)
-
Ranking and Rating Bicycle Helmet Safety Performance in Oblique Impacts Using Eight Different Brain Injury Models
- 2021
-
Ingår i: Annals of Biomedical Engineering. - : Springer. - 0090-6964 .- 1573-9686.
-
Tidskriftsartikel (refereegranskat)abstract
- Bicycle helmets are shown to offer protection against head injuries. Rating methods and test standards are used to evaluate different helmet designs and safety performance. Both strain-based injury criteria obtained from finite element brain injury models and metrics derived from global kinematic responses can be used to evaluate helmet safety performance. Little is known about how different injury models or injury metrics would rank and rate different helmets. The objective of this study was to determine how eight brain models and eight metrics based on global kinematics rank and rate a large number of bicycle helmets (n=17) subjected to oblique impacts. The results showed that the ranking and rating are influenced by the choice of model and metric. Kendall’s tau varied between 0.50 and 0.95 when the ranking was based on maximum principal strain from brain models. One specific helmet was rated as 2-star when using one brain model but as 4-star by another model. This could cause confusion for consumers rather than inform them of the relative safety performance of a helmet. Therefore, we suggest that the biomechanics community should create a norm or recommendation for future ranking and rating methods.
|
|
| 14. |
- Fice, Jason, 1985, et al.
(författare)
-
Neck Muscle and Head/Neck Kinematic Responses While Bracing Against the Steering Wheel During Front and Rear Impacts
- 2021
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 1573-9686 .- 0090-6964. ; 49:3, s. 1069-1082
-
Tidskriftsartikel (refereegranskat)abstract
- Drivers often react to an impending collision by bracing against the steering wheel. The goal of the present study was to quantify the effect of bracing on neck muscle activity and head/torso kinematics during low-speed front and rear impacts. Eleven seated subjects (3F, 8 M) experienced multiple sled impacts (Delta v = 0.77 m/s; a(peak) = 19.9 m/s(2), Delta t = 65.5 ms) with their hands on the steering wheel in two conditions: relaxed and braced against the steering wheel. Electromyographic activity in eight neck muscles (sternohyoid, sternocleidomastoid, splenius capitis, semispinalis capitis, semispinalis cervicis, multifidus, levator scapulae, and trapezius) was recorded unilaterally with indwelling electrodes and normalized by maximum voluntary contraction (MVC) levels. Head and torso kinematics (linear acceleration, angular velocity, angular rotation, and retraction) were measured with sensors and motion tracking. Muscle and kinematic variables were compared between the relaxed and braced conditions using linear mixed models. We found that pre-impact bracing generated only small increases in the pre-impact muscle activity (< 5% MVC) when compared to the relaxed condition. Pre-impact bracing did not increase peak neck muscle responses during the impacts; instead it reduced peak trapezius and multifidus muscle activity by about half during front impacts. Bracing led to widespread changes in the peak amplitude and timing of the torso and head kinematics that were not consistent with a simple stiffening of the head/neck/torso system. Instead pre-impact bracing served to couple the torso more rigidly to the seat while not necessarily coupling the head more rigidly to the torso.
|
|
| 15. |
- Flodin, Johanna, et al.
(författare)
-
Wearable Neuromuscular Electrical Stimulation on Quadriceps Muscle Can Increase Venous Flow
- 2023
-
Ingår i: Annals of Biomedical Engineering. - 0090-6964 .- 1573-9686. ; 51:12, s. 2873-2882
-
Tidskriftsartikel (refereegranskat)abstract
- Neuromuscular electrical stimulation (NMES) of the quadriceps (Q) may increase venous blood flow to reduce the risk of venous thromboembolism. This study assessed whether Q-NMES pants could increase peak venous velocity (PVV) in the femoral vein using Doppler ultrasound and minimize discomfort. On 15 healthy subjects, Q-NMES using textile electrodes integrated in pants was applied with increasing intensity (mA) until the first visible muscle contraction [measurement level (ML)-I] and with an additional increase of six NMES levels (ML II). Discomfort using a numeric rating scale (NRS, 0–10) and PVV were used to assess different NMES parameters: frequency (1, 36, 66 Hz), ramp-up/-down time (RUD) (0, 1 s), plateau time (1.5, 4, and 6 s), and on:off duty cycle (1:1, 1:2, 1:3, 1:4). Q-NMES pants significantly increased PVV from baseline with 93% at ML I and 173% at ML II. Frequencies 36 Hz and 66 Hz and no RUD resulted in significantly higher PVV at both MLs compared to 1 Hz and 1 s RUD, respectively. Plateau time, and duty cycle did not significantly change PVV. Discomfort was only significantly higher with increasing intensity and frequency. Q-NMES pants produces intensity-dependent 2−3-fold increases of venous blood flow with minimal discomfort. The superior NMES parameters were a frequency of 36 Hz, 0 s RUD, and intensity at ML II. Textile-based NMES wearables are promising for non-episodic venous thromboembolism prevention.
|
|
| 16. |
- Forsell, Caroline, et al.
(författare)
-
The Quasi-Static Failure Properties of the Abdominal Aortic Aneurysm Wall Estimated by a Mixed Experimental-Numerical Approach
- 2012
-
Ingår i: Annals of Biomedical Engineering. - : Springer-Verlag New York. - 0090-6964 .- 1573-9686. ; 41:7, s. 1554-1566
-
Tidskriftsartikel (refereegranskat)abstract
- Assessing the risk for abdominal aortic aneurysm (AAA) rupture is critical in the management of aneurysm patients and an individual assessment is possible with the biomechanical rupture risk assessment. Such an assessment could potentially be improved by a constitutive AAA wall model that accounts for irreversible damage-related deformations. Because of that the present study estimated the elastic and inelastic properties of the AAA wall through a mixed experimental-numerical approach. Specifically, finite element (FE) models of bone-shaped tensile specimens were used to merge data from failure testing of the AAA wall with their measured collagen orientation distribution. A histo-mechanical constitutive model for collagen fibers was employed, where plastic fibril sliding determined not only remaining deformations but also weakening of the fiber. The developed FE models were able to replicate the experimentally recorded load-displacement property of all 16 AAA wall specimens that were investigated in the study. Tensile testing in longitudinal direction of the AAA defined a Cauchy strength of 569(SD 411) kPa that was reached at a stretch of 1.436(SD 0.118). The stiffness and strength of specimens decreased with the wall thickness and were elevated (p = 0.018; p = 0.030) in patients with chronic obstructive pulmonary disease (COPD). Smoking affected the tissue parameters that were related to the irreversible deformation response, and no correlation with gender and age was found. The observed effects on the biomechanical properties of the AAA wall could have long-term consequences for the management of aneurysm patients, i.e., specifically they might influence future AAA rupture risk assessments. However, in order to design appropriate clinical validation studies our findings should firstly be verified in a larger patient cohort.
|
|
| 17. |
- Garde, A., et al.
(författare)
-
Breathing pattern characterization in chronic heart failure patients using the respiratory flow signal
- 2010
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 1573-9686 .- 0090-6964. ; 38:12, s. 3572-3580
-
Tidskriftsartikel (refereegranskat)abstract
- This study proposes a method for the characterization of respiratory patterns in chronic heart failure (CHF) patients with periodic breathing (PB) and nonperiodic breathing (nPB), using the flow signal. Autoregressive modeling of the envelope of the respiratory flow signal is the starting point for the pattern characterization. Spectral parameters extracted from the discriminant frequency band (DB) are used to characterize the respiratory patterns. For each classification problem, the most discriminant parameter subset is selected using the leave-one-out cross-validation technique. The power in the right DB provides an accuracy of 84.6% when classifying PB vs. nPB patterns in CHF patients, whereas the power of the DB provides an accuracy of 85.5% when classifying the whole group of CHF patients vs. healthy subjects, and 85.2% when classifying nPB patients vs. healthy subjects.
|
|
| 18. |
- Gasser, T. Christian, et al.
(författare)
-
Micromechanical Characterization of Intra-luminal Thrombus Tissue from Abdominal Aortic Aneurysms
- 2010
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 38:2, s. 371-379
-
Tidskriftsartikel (refereegranskat)abstract
- The reliable assessment of Abdominal Aortic Aneurysm rupture risk is critically important in reducing related mortality without unnecessarily increasing the rate of elective repair. Intra-luminal thrombus (ILT) has multiple biomechanical and biochemical impacts on the underlying aneurysm wall and thrombus failure might be linked to aneurysm rupture. Histological slices from 7 ILTs were analyzed using a sequence of automatic image processing and feature analyzing steps. Derived microstructural data was used to define Representative Volume Elements (RVE), which in turn allowed the estimation of microscopic material properties using the non-linear Finite Element Method. ILT tissue exhibited complex microstructural arrangement with larger pores in the abluminal layer than in the luminal layer. The microstructure was isotropic in the abluminal layer, whereas pores started to orient along the circumferential direction towards the luminal site. ILT's macroscopic (reversible) deformability was supported by large pores in the microstructure and the inhomogeneous structure explains in part the radially changing macroscopic constitutive properties of ILT. Its microscopic properties decreased just slightly from the luminal to the abluminal layer. The present study provided novel microstructural and micromechanical data of ILT tissue, which is critically important to further explore the role of the ILT in aneurysm rupture. Data provided in this study allow an integration of structural information from medical imaging for example, to estimate ILT's macroscopic mechanical properties.
|
|
| 19. |
- Gasser, T. Christian, et al.
(författare)
-
Modeling plaque fissuring and dissection during balloon angioplasty intervention
- 2007
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 35:5, s. 711-723
-
Tidskriftsartikel (refereegranskat)abstract
- Balloon angioplasty intervention is traumatic to arterial tissue. Fracture mechanisms such as plaque fissuring and/or dissection occur and constitute major contributions to the lumen enlargement. However, these types of mechanically-based traumatization of arterial tissue are also contributing factors to both acute procedural complications and chronic restenosis of the treatment site. We propose physical and finite element models, which are generally useable to trace fissuring and/or dissection in atherosclerotic plaques during balloon angioplasty interventions. The arterial wall is described as an anisotropic, heterogeneous, highly deformable, nearly incompressible body, whereas tissue failure is captured by a strong discontinuity kinematics and a novel cohesive zone model. The numerical implementation is based on the partition of unity finite element method and the interface element method. The later is used to link together meshes of the different tissue components. The balloon angioplasty-based failure mechanisms are numerically studied in 3D by means of an atherosclerotic-prone human external iliac artery, with a type V lesion. Image-based 3D geometry is generated and tissue-specific material properties are considered. Numerical results show that in a primary phase the plaque fissures at both shoulders of the fibrous cap and stops at the lamina elastica interna. In a secondary phase, local dissections between the intima and the media develop at the fibrous cap location with the smallest thickness. The predicted results indicate that plaque fissuring and dissection cause localized mechanical trauma, but prevent the main portion of the stenosis from high stress, and hence from continuous tissue damage.
|
|
| 20. |
- Gunther, M, et al.
(författare)
-
An Experimental Model for the Study of Underwater Pressure Waves on the Central Nervous System in Rodents: A Feasibility Study
- 2022
-
Ingår i: Annals of biomedical engineering. - : Springer Science and Business Media LLC. - 1573-9686 .- 0090-6964. ; 50:1, s. 78-85
-
Tidskriftsartikel (refereegranskat)abstract
- Underwater blast differs from blast in air. The increased density and viscosity of water relative to air cause injuries to occur almost exclusively as primary blast, and may cause disorientation in a diver, which may lead to inability to protect the airway and cause drowning. However, cognitive impairments from under water blast wave exposure have not been properly investigated, and no experimental model has been described. We established an experimental model (water shock tube) for simulating the effects of underwater blast pressure waves in rodents, and to investigate neurology in relation to organ injury. The model produced standardized pressure waves (duration of the primary peak 3.5 ms, duration of the entire complex waveform including all subsequent reflections 325 ms, mean impulse 141–281 kPa-ms, mean peak pressure 91–194 kPa). 31 rats were randomized to control (n = 6), exposure 90 kPa (n = 8), 152 kPa (n = 8), and 194 kPa (n = 9). There was a linear trend between the drop height of the water shock tube and electroencephalography (EEG) changes (p = 0.014), while no differences in oxygen saturation, heart rate, S100b or macroscopic bleedings were detected. Microscopic bleedings were detected in lung, intestines, and meninges. Underwater pressure waves caused changes in EEG, at pressures when mild hemorrhage occurred in organs, suggesting an impact on brain functions. The consistent injury profile enabled for the addition of future experimental interventions.
|
|
| 21. |
- Hellström, Mats, 1976, et al.
(författare)
-
Uterine Tissue Engineering and the Future of Uterus Transplantation.
- 2017
-
Ingår i: Annals of biomedical engineering. - : Springer Science and Business Media LLC. - 1573-9686 .- 0090-6964. ; 45:7, s. 1718-1730
-
Tidskriftsartikel (refereegranskat)abstract
- The recent successful births following live donor uterus transplantation are proof-of-concept that absolute uterine factor infertility is a treatable condition which affects several hundred thousand infertile women world-wide due to a dysfunctional uterus. This strategy also provides an alternative to gestational surrogate motherhood which is not practiced in most countries due to ethical, religious or legal reasons. The live donor surgery involved in uterus transplantation takes more than 10h and is then followed by years of immunosuppressive medication to prevent uterine rejection. Immunosuppression is associated with significant adverse side effects, including nephrotoxicity, increased risk of serious infections, and diabetes. Thus, the development of alternative approaches to treat absolute uterine factor infertility would be desirable. This review discusses tissue engineering principles in general, but also details strategies on how to create a bioengineered uterus that could be used for transplantation, without risky donor surgery and any need for immunosuppression. We discuss scaffolds derived from decellularized organs/tissues which may be recellularized using various types of autologous somatic/stem cells, in particular for uterine tissue engineering. It further highlights the hurdles that lay ahead in developing an alternative to an allogeneic source for uterus transplantation.
|
|
| 22. |
|
|
| 23. |
- Hernandez, Fidel, et al.
(författare)
-
Six Degree-of-Freedom Measurements of Human Mild Traumatic Brain Injury
- 2015
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 43:8, s. 1918-1934
-
Tidskriftsartikel (refereegranskat)abstract
- This preliminary study investigated whether direct measurement of head rotation improves prediction of mild traumatic brain injury (mTBI). Although many studies have implicated rotation as a primary cause of mTBI, regulatory safety standards use 3 degree-of-freedom (3DOF) translation-only kinematic criteria to predict injury. Direct 6DOF measurements of human head rotation (3DOF) and translation (3DOF) have not been previously available to examine whether additional DOFs improve injury prediction. We measured head impacts in American football, boxing, and mixed martial arts using 6DOF instrumented mouthguards, and predicted clinician-diagnosed injury using 12 existing kinematic criteria and 6 existing brain finite element (FE) criteria. Among 513 measured impacts were the first two 6DOF measurements of clinically diagnosed mTBI. For this dataset, 6DOF criteria were the most predictive of injury, more than 3DOF translation-only and 3DOF rotation-only criteria. Peak principal strain in the corpus callosum, a 6DOF FE criteria, was the strongest predictor, followed by two criteria that included rotation measurements, peak rotational acceleration magnitude and Head Impact Power (HIP). These results suggest head rotation measurements may improve injury prediction. However, more 6DOF data is needed to confirm this evaluation of existing injury criteria, and to develop new criteria that considers directional sensitivity to injury.
|
|
| 24. |
- Holzapfel, Gerhard A., et al.
(författare)
-
A layer-specific three-dimensional model for the simulation of balloon angioplasty using magnetic resonance imaging and mechanical testing
- 2002
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 30:6, s. 753-767
-
Tidskriftsartikel (refereegranskat)abstract
- A detailed understanding of the mechanical procedure of balloon angioplasty requires three-dimensional (3D) modeling and efficient numerical simulations. We have developed a 3D model for eight distinct arterial components associated with specific mechanical responses. The 3D geometrical model is based on in vitro magnetic resonance imaging of a human stenotic postmortem artery and is represented by nonuniform rational B-spline surfaces. Mechanical tests of the corresponding vascular tissues provide a fundamental basis for the formulation of large strain constitutive laws, which model the typical anisotropic, highly nonlinear, and inelastic mechanical characteristics under supraphysiological loadings. The 3D finite-element realization considers the balloon-artery interaction and accounts for vessel-specific axial in situ prestretches. 3D stress states of the investigated artery during balloon expansion and stent deployment were analyzed. Furthermore, we studied the changes of the 3D stress state due to model simplifications, which are characterized by neglecting axial in situ prestretch, assuming plane strain states, and isotropic material responses, as commonly utilized in previous works. Since these simplifications lead to maximum stress deviations of up to 600%-where even the stress character may interchange-the associated models are, in general, inappropriate. The proposed approach provides a tool that has the potential (i) to improve procedural protocols and the design of interventional instruments on a lesion-specific basis, and (ii) to determine postangioplasty mechanical environments, which may be correlated with restenosis responses.
|
|
| 25. |
- Holzapfel, Gerhard A., et al.
(författare)
-
Layer-specific 3D residual deformations of human aortas with non-atherosclerotic intimal thickening
- 2007
-
Ingår i: Annals of Biomedical Engineering. - : Springer Science and Business Media LLC. - 0090-6964 .- 1573-9686. ; 35:4, s. 530-545
-
Tidskriftsartikel (refereegranskat)abstract
- Data relating to residual deformations in human arteries are scarce. In this paper we investigate three-dimensional residual deformations for intact strips and for their separate layers from human aortas in their passive state. From 11 abdominal aortas with identified anamnesis, 16 pairs of rings and axial strips were harvested, and the rings cut open. After 16 h images of the resulting geometries were recorded, and the strips were separated into their three layers; after another 6 h images were again recorded. Image processing and analysis was then used to quantify residual stretches and curvatures. For each specimen histological analysis established that the intima, media and adventitia were clearly separated, and the separation was atraumatic. Axial in situ stretches were determined to be 1.196 +/- 0.084. On separation, the strips from the adventitia and media shortened (between 4.03 and 8.76% on average), while the intimal strips elongated on average by 3.84% (circumferential) and 4.28% (axial) relative to the associated intact strips. After separation, the adventitia from the ring sprang open by about 180 degrees on average, becoming flat, the intima opened only slightly, but the media sprang open by more than 180 degrees (as did the intact strip). The adventitia and intima from the axial strips remained flat, while the media (and the intact strip) bent away from the vessel axis. This study has shown that residual deformations are three dimensional and cannot be described by a single parameter such as 'the' opening angle. Their quantification and modeling therefore require consideration of both stretching and bending, which are highly layer-specific and axially dependent.
|
|
