| 1. |
- Athanasiadis, M, et al.
(författare)
-
Printed elastic membranes for multimodal pacing and recording of human stem-cell-derived cardiomyocytes
- 2020
-
Ingår i: NPJ FLEXIBLE ELECTRONICS. - : Springer Science and Business Media LLC. - 2397-4621. ; 4:1
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Bioelectronic interfaces employing arrays of sensors and bioactuators are promising tools for the study, repair and engineering of cardiac tissues. They are typically constructed from rigid and brittle materials processed in a cleanroom environment. An outstanding technological challenge is the integration of soft materials enabling a closer match to the mechanical properties of biological cells and tissues. Here we present an algorithm for direct writing of elastic membranes with embedded electrodes, optical waveguides and microfluidics using a commercial 3D printing system and a palette of silicone elastomers. As proof of principle, we demonstrate interfacing of cardiomyocytes derived from human induced pluripotent stem cells (hiPSCs), which are engineered to express Channelrhodopsin-2. We demonstrate electrical recording of cardiomyocyte field potentials and their concomitant modulation by optical and pharmacological stimulation delivered via the membrane. Our work contributes a simple prototyping strategy with potential applications in organ-on-chip or implantable systems that are multi-modal and mechanically soft.
|
|
| 2. |
- Bergqvist, Jonas, et al.
(författare)
-
Asymmetric photocurrent extraction in semitransparent laminated flexible organic solar cells
- 2018
-
Ingår i: npj Flexible Electronics. - : Springer Science and Business Media LLC. - 2397-4621. ; 2:1
-
Tidskriftsartikel (refereegranskat)abstract
- Scalable production methods and low-cost materials with low embodied energy are key to success for organic solar cells. PEDOT(PSS) electrodes meet these criteria and allow for low-cost and all solution-processed solar cells. However, such devices are prone to shunting. In this work we introduce a roll-to-roll lamination method to construct semitransparent solar cells with a PEDOT(PSS) anode and an polyethyleneimine (PEI) modified PEDOT(PSS) cathode. We use the polymer:PCBM active layer coated on the electrodes as the lamination adhesive. Our lamination method efficiently eliminates any shunting. Extended exposure to ambient degrades the laminated devices, which manifests in a significantly reduced photocurrent extraction when the device is illuminated through the anode, despite the fact that the PEDOT(PSS) electrodes are optically equivalent. We show that degradation-induced electron traps lead to increased trap-assisted recombination at the anode side of the device. By limiting the exposure time to ambient during production, degradation is significantly reduced. We show that lamination using the active layer as the adhesive can result in device performance equal to that of conventional sequential coating.
|
|
| 3. |
- Edberg, Jesper, et al.
(författare)
-
Laser-induced graphitization of a forest-based ink for use in flexible and printed electronics
- 2020
-
Ingår i: npj Flexible Electron.. - : Nature Research. - 2397-4621. ; 4
-
Tidskriftsartikel (refereegranskat)abstract
- Laser-induced graphitization (LIG) is a method of converting a carbon-rich precursor into a highly conductive graphite-like carbon by laser scribing. This method has shown great promise as a versatile and low-cost patterning technique. Here we show for the first time how an ink based on cellulose and lignin can be patterned using screen printing followed by laser graphitization. Screen printing is one of the most commonly used manufacturing techniques of printed electronics, making this approach compatible with existing processing of various devices. The use of forest-based materials opens the possibility of producing green and sustainable electronics. Pre-patterning of the ink enables carbon patterns without residual precursor between the patterns. We investigated the effect of the ink composition, laser parameters, and additives on the conductivity and structure of the resulting carbon and could achieve low sheet resistance of 3.8 Ω sq-1 and a high degree of graphitization. We demonstrated that the process is compatible with printed electronics and finally manufactured a humidity sensor which uses lignin as the sensing layer and graphitized lignin as the electrodes.
|
|
| 4. |
- Jakešová, Marie, et al.
(författare)
-
Wireless organic electronic ion pumps driven by photovoltaics
- 2019
-
Ingår i: npj Flexible Electronics. - : Nature Publishing Group. - 2397-4621 .- 2397-4621. ; 3:1, s. 14-14
-
Tidskriftsartikel (refereegranskat)abstract
- The organic electronic ion pump (OEIP) is an emerging bioelectronic technology for on-demand and local delivery of pharmacologically active species, especially targeting alkali ions, and neurotransmitters. While electrical control is advantageous for providing precise spatial, temporal, and quantitative delivery, traditionally, it necessitates wiring. This complicates implantation. Herein, we demonstrate integration of an OEIP with a photovoltaic driver on a flexible carrier, which can be addressed by red light within the tissue transparency window. Organic thin-film bilayer photovoltaic pixels are arranged in series and/or vertical tandem to provide the 2.5–4.5 V necessary for operating the high-resistance electrophoretic ion pumps. We demonstrate light-stimulated transport of cations, ranging in size from protons to acetylcholine. The device, laminated on top of the skin, can easily be driven with a red LED emitting through a 1.5-cm-thick finger. The end result of our work is a thin and flexible integrated wireless device platform.
|
|
| 5. |
- Lopes, T. S., et al.
(författare)
-
Cu(In,Ga)Se2 based ultrathin solar cells the pathway from lab rigid to large scale flexible technology
- 2023
-
Ingår i: npj Flexible Electronics. - : Springer Nature. - 2397-4621. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- The incorporation of interface passivation structures in ultrathin Cu(In,Ga)Se2 based solar cells is shown. The fabrication used an industry scalable lithography technique—nanoimprint lithography (NIL)—for a 15 × 15 cm2 dielectric layer patterning. Devices with a NIL nanopatterned dielectric layer are benchmarked against electron-beam lithography (EBL) patterning, using rigid substrates. The NIL patterned device shows similar performance to the EBL patterned device.The impact of the lithographic processes in the rigid solar cells’ performance were evaluated via X-ray Photoelectron Spectroscopy and through a Solar Cell Capacitance Simulator. The device on stainless-steel showed a slightly lower performance than the rigid approach, due to additional challenges of processing steel substrates, even though scanning transmission electron microscopy did not show clear evidence of impurity diffusion. Notwithstanding, time-resolved photoluminescence results strongly suggested elemental diffusion from the flexible substrate. Nevertheless, bending tests on the stainless-steel device demonstrated the mechanical stability of the CIGS-based device.
|
|
| 6. |
- Lund, Anja, 1971-, et al.
(författare)
-
Energy harvesting textiles for a rainy day : woven piezoelectrics based on melt-spun PVDF microfibres with a conducting core
- 2018
-
Ingår i: npj Flexible Electronics. - : Springer Science and Business Media LLC. - 2397-4621. ; 2
-
Tidskriftsartikel (refereegranskat)abstract
- Recent advances in ubiquitous low-power electronics call for the development of light-weight and flexible energy sources. The textile format is highly attractive for unobtrusive harvesting of energy from e.g., biomechanical movements. Here, we report the manufacture and characterisation of fully textile piezoelectric generators that can operate under wet conditions. We use a weaving loom to realise textile bands with yarns of melt-spun piezoelectric microfibres, that consist of a conducting core surrounded by β-phase poly(vinylidene fluoride) (PVDF), in the warp direction. The core-sheath constitution of the piezoelectric microfibres results in a—for electronic textiles—unique architecture. The inner electrode is fully shielded from the outer electrode (made up of conducting yarns that are integrated in the weft direction) which prevents shorting under wet conditions. As a result, and in contrast to other energy harvesting textiles, we are able to demonstrate piezoelectric fabrics that do not only continue to function when in contact with water, but show enhanced performance. The piezoelectric bands generate an output of several volts at strains below one percent. We show that integration into the shoulder strap of a laptop case permits the continuous generation of four microwatts of power during a brisk walk. This promising performance, combined with the fact that our solution uses scalable materials and well-established industrial manufacturing methods, opens up the possibility to develop wearable electronics that are powered by piezoelectric textiles.
|
|
| 7. |
- Majee, Subimal, et al.
(författare)
-
Low temperature chemical sintering of inkjet-printed Zn nanoparticles for highly conductive flexible electronic components
- 2021
-
Ingår i: npj Flexible Electronics. - : Nature Research. - 2397-4621. ; 5:1
-
Tidskriftsartikel (refereegranskat)abstract
- This study illustrates an innovative way to fabricate inkjet-printed tracks by sequential printing of Zn nanoparticle ink and curing ink for low temperature in situ chemical sintering. Employing chemical curing in place of standard sintering methods leads to the advantages of using flexible substrates that may not withstand the high thermal budgets of the standard methods. A general formulation engineering method is adopted to produce highly concentrated Zn ink which is cured by inkjet printing an over-layer of aqueous acetic acid which is the curing agent. The experimental results reveal that a narrow window of acid concentration of curing ink plays a crucial role in determining the electrical properties of the printed Zn nanoparticles. Highly conductive (~105 S m−1) and mechanically flexible printed Zn features are achieved. In addition, from systematic material characterization, we obtain an understanding of the curing mechanism. Finally, a touch sensor circuit is demonstrated involving all-Zn printed conductive tracks. © 2021, The Author(s).
|
|
| 8. |
- Massetti, Matteo, et al.
(författare)
-
Fully 3D-printed organic electrochemical transistors
- 2023
-
Ingår i: NPJ FLEXIBLE ELECTRONICS. - : NATURE PORTFOLIO. - 2397-4621. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- Organic electrochemical transistors (OECTs) are being researched for various applications, ranging from sensors to logic gates and neuromorphic hardware. To meet the requirements of these diverse applications, the device fabrication process must be compatible with flexible and scalable digital techniques. Here, we report a direct-write additive process to fabricate fully 3D-printed OECTs, using 3D printable conducting, semiconducting, insulating, and electrolyte inks. These 3D-printed OECTs, which operate in the depletion mode, can be fabricated on flexible substrates, resulting in high mechanical and environmental stability. The 3D-printed OECTs have good dopamine biosensing capabilities (limit of detection down to 6 mu M without metal gate electrodes) and show long-term (similar to 1 h) synapse response, indicating their potential for various applications such as sensors and neuromorphic hardware. This manufacturing strategy is suitable for applications that require rapid design changes and digitally enabled direct-write techniques.
|
|
| 9. |
- Say, Mehmet Girayhan, et al.
(författare)
-
Spray-coated paper supercapacitors
- 2020
-
Ingår i: npj Flexible Electronics. - : Nature Research. - 2397-4621. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- The increasing demands to further electrify and digitalize our society set demands for a green electrical energy storage technology that can be scaled between very small, and heavily distributed electrical energy sources, to very large volumes. Such technology must be compatible with fast-throughput, large-volume and low-cost fabrication processes, such as using printing and coating techniques. Here, we demonstrate a sequential production protocol to fabricate supercapacitors including electrodes based on cellulose nanofibrils (CNF) and the conducting polymer PEDOT:PSS. Thin and lightweight paper electrodes, carbon adhesion layers and the gel electrolyte are fabricated using spray coating, screen printing, and bar coating, respectively. These all solid-state supercapacitors are flexible, mechanically robust and exhibit a low equivalent series resistance (0.22 Ω), thus resulting in a high power density (∼104 W/kg) energy technology. The supercapacitors are combined and connected to a power management circuit to demonstrate a smart packaging application. This work shows that operational and embedded supercapacitors can be manufactured in a manner to allow for the integration with, for instance smart packaging solutions, thus enabling powered, active internet-of-things (IoT) devices in a highly distributed application. © 2020, The Author(s).
|
|
| 10. |
- Shiran Chaharsoughi, Mina, et al.
(författare)
-
Ultrasensitive electrolyte-assisted temperature sensor
- 2020
-
Ingår i: npj Flexible Electronics. - : Nature Research. - 2397-4621. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- Heat sensors form an important class of devices that are used across multiple fields and sectors. For applications such as electronic skin and health monitoring, it is particularly advantageous if the output electronic signals are not only high, stable, and reproducible, but also self-generated to minimize power consumption. Here, we present an ultrasensitive heat sensing concept that fulfills these criteria while also being compatible with scalable low-cost manufacturing on flexible substrates. The concept resembles a traditional thermocouple, but with separated electrodes bridged by a gel-like electrolyte and with orders of magnitudes higher signals (around 11 mV K−1). The sensor pixels provide stable and reproducible signals upon heating, which, for example, could be used for heat mapping. Further modification to plasmonic nanohole metasurface electrodes made the sensors capable of also detecting light-induced heating. Finally, we present devices on flexible substrates and show that they can be used to detect human touch. © 2020, The Author(s).
|
|
| 11. |
- Wang, Feng, et al.
(författare)
-
Defects engineering for high-performance perovskite solar cells
- 2018
-
Ingår i: npj Flexible Electronics. - : Nature Publishing Group. - 2397-4621. ; 2:1
-
Tidskriftsartikel (refereegranskat)abstract
- Metal halide perovskites have achieved great success in photovoltaic applications during the last few years. The solar to electrical power conversion efficiency (PCE) of perovskite solar cells has been rapidly improved from 3.9% to certified 22.7% due to the extensive efforts on film deposition methods, composition and device engineering. Further investigation on eliminating the defect states in perovskite absorbers is necessary to push forward the PCE of perovskite solar cells approaching the Shockley-Queisser limit. In this review, we summarize the defect properties in perovskite films and present methodologies to control the defects density, including the growth of large size crystals, photo-curing method, grain boundary and surface passivation, and modification of the substrates. We also discuss the defects-related stability and hysteresis issues and highlight the current challenges and opportunities in defects control of perovskite films.
|
|
| 12. |
- Yang, Kunlong, et al.
(författare)
-
Tunable flexible artificial synapses : a new path toward a wearable electronic system
- 2018
-
Ingår i: npj Flexible Electronics. - : Springer Science and Business Media LLC. - 2397-4621. ; 2:20
-
Tidskriftsartikel (refereegranskat)abstract
- The flexible electronics has been deemed to be a promising approach to the wearable electronic systems. However, the mismatching between the existing flexible devices and the conventional computing paradigm results an impasse in this field. In this work, a new way to access to this goal is proposed by combining flexible devices and the neuromorphic architecture together. To achieve that, a high-performance flexible artificial synapse is created based on a carefully designed and optimized memristive transistor. The device exhibits high-performance which has near-linear non-volatile resistance change under 10,000 identical pulse signals within the 515% dynamic range, and has the energy consumption as low as 45 fJ per pulse. It also displays multiple synaptic plasticity features, which demonstrates its potential for real-time online learning. Besides, the adaptability by virtue of its three-terminal structure specifically contributes its improved uniformity, repeatability, and reduced power consumption. This work offers a very viable solution for the future wearable computing.
|
|
| 13. |
- Zabihipour, Marzieh, et al.
(författare)
-
High yield manufacturing of fully screen-printed organic electrochemical transistors
- 2020
-
Ingår i: npj Flexible Electronics. - : Nature Research. - 2397-4621. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- The potential of the screen printing method for large-scale production of organic electrochemical transistors (OECTs), combining high production yield with low cost, is here demonstrated. Fully screen-printed OECTs of 1 mm2 area, based on poly(3,4-ethylenedioxythiophene) doped with poly(styrensulfonate) (PEDOT:PSS), have been manufactured on flexible polyethylene terephthalate (PET) substrates. The goal of this project effort has been to explore and develop the printing processing to enable high yield and stable transistor parameters, targeting miniaturized digital OECT circuits for large-scale integration (LSI). Of the 760 OECTs manufactured in one batch on a PET sheet, only two devices were found malfunctioning, thus achieving an overall manufacturing yield of 99.7%. A drain current ON/OFF ratio at least equal to 400 was applied as the strict exclusion principle for the yield, motivated by proper operation in LSI circuits. This consistent performance of low-footprint OECTs allows for the integration of PEDOT:PSS-based OECTs into complex logic circuits operating at high stability and accuracy. © 2020, The Author(s).
|
|
