| 1. |
- Feigin, Valery L., et al.
(författare)
-
Global, regional, and national burden of stroke and its risk factors, 1990-2019 : a systematic analysis for the Global Burden of Disease Study 2019
- 2021
-
Ingår i: Lancet Neurology. - : Elsevier. - 1474-4422 .- 1474-4465. ; 20:10, s. 795-820
-
Tidskriftsartikel (refereegranskat)abstract
- Background Regularly updated data on stroke and its pathological types, including data on their incidence, prevalence, mortality, disability, risk factors, and epidemiological trends, are important for evidence-based stroke care planning and resource allocation. The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) aims to provide a standardised and comprehensive measurement of these metrics at global, regional, and national levels. Methods We applied GBD 2019 analytical tools to calculate stroke incidence, prevalence, mortality, disability-adjusted life-years (DALYs), and the population attributable fraction (PAF) of DALYs (with corresponding 95% uncertainty intervals [UIs]) associated with 19 risk factors, for 204 countries and territories from 1990 to 2019. These estimates were provided for ischaemic stroke, intracerebral haemorrhage, subarachnoid haemorrhage, and all strokes combined, and stratified by sex, age group, and World Bank country income level. Findings In 2019, there were 12.2 million (95% UI 11.0-13.6) incident cases of stroke, 101 million (93.2-111) prevalent cases of stroke, 143 million (133-153) DALYs due to stroke, and 6.55 million (6.00-7.02) deaths from stroke. Globally, stroke remained the second-leading cause of death (11.6% [10.8-12.2] of total deaths) and the third-leading cause of death and disability combined (5.7% [5.1-6.2] of total DALYs) in 2019. From 1990 to 2019, the absolute number of incident strokes increased by 70.0% (67.0-73.0), prevalent strokes increased by 85.0% (83.0-88.0), deaths from stroke increased by 43.0% (31.0-55.0), and DALYs due to stroke increased by 32.0% (22.0-42.0). During the same period, age-standardised rates of stroke incidence decreased by 17.0% (15.0-18.0), mortality decreased by 36.0% (31.0-42.0), prevalence decreased by 6.0% (5.0-7.0), and DALYs decreased by 36.0% (31.0-42.0). However, among people younger than 70 years, prevalence rates increased by 22.0% (21.0-24.0) and incidence rates increased by 15.0% (12.0-18.0). In 2019, the age-standardised stroke-related mortality rate was 3.6 (3.5-3.8) times higher in the World Bank low-income group than in the World Bank high-income group, and the age-standardised stroke-related DALY rate was 3.7 (3.5-3.9) times higher in the low-income group than the high-income group. Ischaemic stroke constituted 62.4% of all incident strokes in 2019 (7.63 million [6.57-8.96]), while intracerebral haemorrhage constituted 27.9% (3.41 million [2.97-3.91]) and subarachnoid haemorrhage constituted 9.7% (1.18 million [1.01-1.39]). In 2019, the five leading risk factors for stroke were high systolic blood pressure (contributing to 79.6 million [67.7-90.8] DALYs or 55.5% [48.2-62.0] of total stroke DALYs), high body-mass index (34.9 million [22.3-48.6] DALYs or 24.3% [15.7-33.2]), high fasting plasma glucose (28.9 million [19.8-41.5] DALYs or 20.2% [13.8-29.1]), ambient particulate matter pollution (28.7 million [23.4-33.4] DALYs or 20.1% [16.6-23.0]), and smoking (25.3 million [22.6-28.2] DALYs or 17.6% [16.4-19.0]). Interpretation The annual number of strokes and deaths due to stroke increased substantially from 1990 to 2019, despite substantial reductions in age-standardised rates, particularly among people older than 70 years. The highest age-standardised stroke-related mortality and DALY rates were in the World Bank low-income group. The fastest-growing risk factor for stroke between 1990 and 2019 was high body-mass index. Without urgent implementation of effective primary prevention strategies, the stroke burden will probably continue to grow across the world, particularly in low-income countries.
|
|
| 2. |
|
|
| 3. |
- Lozano, Rafael, et al.
(författare)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
| 4. |
- Murray, Christopher J. L., et al.
(författare)
-
Population and fertility by age and sex for 195 countries and territories, 1950–2017: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1995-2051
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Population estimates underpin demographic and epidemiological research and are used to track progress on numerous international indicators of health and development. To date, internationally available estimates of population and fertility, although useful, have not been produced with transparent and replicable methods and do not use standardised estimates of mortality. We present single-calendar year and single-year of age estimates of fertility and population by sex with standardised and replicable methods. Methods: We estimated population in 195 locations by single year of age and single calendar year from 1950 to 2017 with standardised and replicable methods. We based the estimates on the demographic balancing equation, with inputs of fertility, mortality, population, and migration data. Fertility data came from 7817 location-years of vital registration data, 429 surveys reporting complete birth histories, and 977 surveys and censuses reporting summary birth histories. We estimated age-specific fertility rates (ASFRs; the annual number of livebirths to women of a specified age group per 1000 women in that age group) by use of spatiotemporal Gaussian process regression and used the ASFRs to estimate total fertility rates (TFRs; the average number of children a woman would bear if she survived through the end of the reproductive age span [age 10–54 years] and experienced at each age a particular set of ASFRs observed in the year of interest). Because of sparse data, fertility at ages 10–14 years and 50–54 years was estimated from data on fertility in women aged 15–19 years and 45–49 years, through use of linear regression. Age-specific mortality data came from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 estimates. Data on population came from 1257 censuses and 761 population registry location-years and were adjusted for underenumeration and age misreporting with standard demographic methods. Migration was estimated with the GBD Bayesian demographic balancing model, after incorporating information about refugee migration into the model prior. Final population estimates used the cohort-component method of population projection, with inputs of fertility, mortality, and migration data. Population uncertainty was estimated by use of out-of-sample predictive validity testing. With these data, we estimated the trends in population by age and sex and in fertility by age between 1950 and 2017 in 195 countries and territories. Findings: From 1950 to 2017, TFRs decreased by 49·4% (95% uncertainty interval [UI] 46·4–52·0). The TFR decreased from 4·7 livebirths (4·5–4·9) to 2·4 livebirths (2·2–2·5), and the ASFR of mothers aged 10–19 years decreased from 37 livebirths (34–40) to 22 livebirths (19–24) per 1000 women. Despite reductions in the TFR, the global population has been increasing by an average of 83·8 million people per year since 1985. The global population increased by 197·2% (193·3–200·8) since 1950, from 2·6 billion (2·5–2·6) to 7·6 billion (7·4–7·9) people in 2017; much of this increase was in the proportion of the global population in south Asia and sub-Saharan Africa. The global annual rate of population growth increased between 1950 and 1964, when it peaked at 2·0%; this rate then remained nearly constant until 1970 and then decreased to 1·1% in 2017. Population growth rates in the southeast Asia, east Asia, and Oceania GBD super-region decreased from 2·5% in 1963 to 0·7% in 2017, whereas in sub-Saharan Africa, population growth rates were almost at the highest reported levels ever in 2017, when they were at 2·7%. The global average age increased from 26·6 years in 1950 to 32·1 years in 2017, and the proportion of the population that is of working age (age 15–64 years) increased from 59·9% to 65·3%. At the national level, the TFR decreased in all countries and territories between 1950 and 2017; in 2017, TFRs ranged from a low of 1·0 livebirths (95% UI 0·9–1·2) in Cyprus to a high of 7·1 livebirths (6·8–7·4) in Niger. The TFR under age 25 years (TFU25; number of livebirths expected by age 25 years for a hypothetical woman who survived the age group and was exposed to current ASFRs) in 2017 ranged from 0·08 livebirths (0·07–0·09) in South Korea to 2·4 livebirths (2·2–2·6) in Niger, and the TFR over age 30 years (TFO30; number of livebirths expected for a hypothetical woman ageing from 30 to 54 years who survived the age group and was exposed to current ASFRs) ranged from a low of 0·3 livebirths (0·3–0·4) in Puerto Rico to a high of 3·1 livebirths (3·0–3·2) in Niger. TFO30 was higher than TFU25 in 145 countries and territories in 2017. 33 countries had a negative population growth rate from 2010 to 2017, most of which were located in central, eastern, and western Europe, whereas population growth rates of more than 2·0% were seen in 33 of 46 countries in sub-Saharan Africa. In 2017, less than 65% of the national population was of working age in 12 of 34 high-income countries, and less than 50% of the national population was of working age in Mali, Chad, and Niger. Interpretation: Population trends create demographic dividends and headwinds (ie, economic benefits and detriments) that affect national economies and determine national planning needs. Although TFRs are decreasing, the global population continues to grow as mortality declines, with diverse patterns at the national level and across age groups. To our knowledge, this is the first study to provide transparent and replicable estimates of population and fertility, which can be used to inform decision making and to monitor progress. Funding: Bill & Melinda Gates Foundation.
|
|
| 5. |
- Sepanlou, Sadaf G., et al.
(författare)
-
The global, regional, and national burden of cirrhosis by cause in 195 countries and territories, 1990-2017 : a systematic analysis for the Global Burden of Disease Study 2017
- 2020
-
Ingår i: The Lancet Gastroenterology & Hepatology. - 2468-1253. ; 5:3, s. 245-266
-
Tidskriftsartikel (refereegranskat)abstract
- Background Cirrhosis and other chronic liver diseases (collectively referred to as cirrhosis in this paper) are a major cause of morbidity and mortality globally, although the burden and underlying causes differ across locations and demographic groups. We report on results from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 on the burden of cirrhosis and its trends since 1990, by cause, sex, and age, for 195 countries and territories. Methods We used data from vital registrations, vital registration samples, and verbal autopsies to estimate mortality. We modelled prevalence of total, compensated, and decompensated cirrhosis on the basis of hospital and claims data. Disability-adjusted life-years (DALYs) were calculated as the sum of years of life lost due to premature death and years lived with disability. Estimates are presented as numbers and age-standardised or age-specific rates per 100 000 population, with 95% uncertainty intervals (UIs). All estimates are presented for five causes of cirrhosis: hepatitis B, hepatitis C, alcohol-related liver disease, non-alcoholic steatohepatitis (NASH), and other causes. We compared mortality, prevalence, and DALY estimates with those expected according to the Socio-demographic Index (SDI) as a proxy for the development status of regions and countries. Findings In 2017, cirrhosis caused more than 1.32 million (95% UI 1.27-1.45) deaths (440000 [416 000-518 000; 33.3%] in females and 883 000 [838 000-967 000; 66.7%] in males) globally, compared with less than 899 000 (829 000-948 000) deaths in 1990. Deaths due to cirrhosis constituted 2.4% (2.3-2.6) of total deaths globally in 2017 compared with 1.9% (1.8-2.0) in 1990. Despite an increase in the number of deaths, the age-standardised death rate decreased from 21.0 (19.2-22.3) per 100 000 population in 1990 to 16.5 (15.8-18-1) per 100 000 population in 2017. Sub-Saharan Africa had the highest age-standardised death rate among GBD super-regions for all years of the study period (32.2 [25.8-38.6] deaths per 100 000 population in 2017), and the high-income super-region had the lowest (10.1 [9.8-10-5] deaths per 100 000 population in 2017). The age-standardised death rate decreased or remained constant from 1990 to 2017 in all GBD regions except eastern Europe and central Asia, where the age-standardised death rate increased, primarily due to increases in alcohol-related liver disease prevalence. At the national level, the age-standardised death rate of cirrhosis was lowest in Singapore in 2017 (3.7 [3.3-4.0] per 100 000 in 2017) and highest in Egypt in all years since 1990 (103.3 [64.4-133.4] per 100 000 in 2017). There were 10.6 million (10.3-10.9) prevalent cases of decompensated cirrhosis and 112 million (107-119) prevalent cases of compensated cirrhosis globally in 2017. There was a significant increase in age-standardised prevalence rate of decompensated cirrhosis between 1990 and 2017. Cirrhosis caused by NASH had a steady age-standardised death rate throughout the study period, whereas the other four causes showed declines in age-standardised death rate. The age-standardised prevalence of compensated and decompensated cirrhosis due to NASH increased more than for any other cause of cirrhosis (by 33.2% for compensated cirrhosis and 54.8% for decompensated cirrhosis) over the study period. From 1990 to 2017, the number of prevalent cases snore than doubled for compensated cirrhosis due to NASH and more than tripled for decompensated cirrhosis due to NASH. In 2017, age-standardised death and DALY rates were lower among countries and territories with higher SDI. Interpretation Cirrhosis imposes a substantial health burden on many countries and this burden has increased at the global level since 1990, partly due to population growth and ageing. Although the age-standardised death and DALY rates of cirrhosis decreased from 1990 to 2017, numbers of deaths and DALYs and the proportion of all global deaths due to cirrhosis increased. Despite the availability of effective interventions for the prevention and treatment of hepatitis B and C, they were still the main causes of cirrhosis burden worldwide, particularly in low-income countries. The impact of hepatitis B and C is expected to be attenuated and overtaken by that of NASH in the near future. Cost-effective interventions are required to continue the prevention and treatment of viral hepatitis, and to achieve early diagnosis and prevention of cirrhosis due to alcohol-related liver disease and NASH.
|
|
| 6. |
|
|
| 7. |
- Alsabery, Ammar I., et al.
(författare)
-
Entropy Generation and Natural Convection Flow of Hybrid Nanofluids in a Partially Divided Wavy Cavity Including Solid Blocks
- 2020
-
Ingår i: Energies. - : MDPI AG. - 1996-1073. ; 13:11
-
Tidskriftsartikel (refereegranskat)abstract
- The present investigation addressed the entropy generation, fluid flow, and heat transferregarding Cu-Al2O3-water hybrid nanofluids into a complex shape enclosure containing a hot-halfpartition were addressed. The sidewalls of the enclosure are made of wavy walls including coldisothermal temperature while the upper and lower surfaces remain insulated. The governingequations toward conservation of mass, momentum, and energy were introduced into the formof partial differential equations. The second law of thermodynamic was written for the friction andthermal entropy productions as a function of velocity and temperatures. The governing equationsoccurred molded into a non-dimensional pattern and explained through the finite element method.Outcomes were investigated for Cu-water, Al2O3-water, and Cu-Al2O3-water nanofluids to addressthe effect of using composite nanoparticles toward the flow and temperature patterns and entropygeneration. Findings show that using hybrid nanofluid improves the Nusselt number comparedto simple nanofluids. In the case of low Rayleigh numbers, such enhancement is more evident.Changing the geometrical aspects of the cavity induces different effects toward the entropy generationand Bejan number. Generally, the global entropy generation for Cu-Al2O3-water hybrid nanofluidtakes places between the entropy generation values regarding Cu-water and Al2O3-water nanofluids.
|
|
| 8. |
- Ehsan, Muhsan, et al.
(författare)
-
Groundwater delineation for sustainable improvement and development aided by GIS, AHP, and MIF techniques
- 2024
-
Ingår i: Applied water science. - : Springer Science and Business Media Deutschland GmbH. - 2190-5487 .- 2190-5495. ; 14:2
-
Tidskriftsartikel (refereegranskat)abstract
- Exploration of groundwater is an integral part of viable resource growth for society, economy, and irrigation. However, uncontrolled utilization is mainly reported in urban and industries due to the increasing demand for water in semi-arid and arid regions of the world. In the background, groundwater demarcation for potential areas is vital in meeting necessary demand. The current study applied an integrated method comprising the analytical hierarchy process (AHP), multiple influence factors (MIF), combined with a linear regression curve and observatory well data for groundwater prospects mapping. Thematic maps such as flow direction, flow accumulation, elevation map, land use land cover, slope, soil texture, hill shade, geomorphology, normalized vegetation index, and groundwater depth map were generated utilizing remote sensing techniques. The relative weight of each parameter was estimated and then assigned to major and minor parameters. Potential zones for groundwater were classified into five classes, namely very good, good, moderate, poor, and very poor, based on AHP and MIF methods. A spatially explicit sensitivity and uncertainty analysis method to a GIS-based multi-criteria groundwater potential zone model is presented in this research. The study addressed a flaw in the way groundwater potential mapping results are typically presented in GIS-based multi-criteria decision analysis studies, where discrete class outputs are used without any assessment of their certainty with respect to variations in criteria weighting, which is one of the main contributors to output uncertainty. The study region is categorized based on inferred results as very poor, poor, marginal, and very good in potential ground quality 3.04 km2 is considered extremely poor, 3.33 km2 is considered poor, 64.42 km2 is considered very good, and 85.84 km2 is considered marginal zones, which shows reliable and potential implementation. The outcomes of AHP and MIF were validated by linear regression curve and actual water table in a study area. The study results help to formulate the potential demarcation of groundwater zones for future sustainable planning and development of groundwater sources. This study may be helpful to provide a cost-effective solution to water resources crises. The current study finding may be helpful for decision-makers and administrative professionals for sustainable management of groundwater resources for present and future demands.
|
|
| 9. |
- Khatri, C, et al.
(författare)
-
Outcomes after perioperative SARS-CoV-2 infection in patients with proximal femoral fractures: an international cohort study
- 2021
-
Ingår i: BMJ open. - : BMJ. - 2044-6055. ; 11:11, s. e050830-
-
Tidskriftsartikel (refereegranskat)abstract
- Studies have demonstrated high rates of mortality in people with proximal femoral fracture and SARS-CoV-2, but there is limited published data on the factors that influence mortality for clinicians to make informed treatment decisions. This study aims to report the 30-day mortality associated with perioperative infection of patients undergoing surgery for proximal femoral fractures and to examine the factors that influence mortality in a multivariate analysis.SettingProspective, international, multicentre, observational cohort study.ParticipantsPatients undergoing any operation for a proximal femoral fracture from 1 February to 30 April 2020 and with perioperative SARS-CoV-2 infection (either 7 days prior or 30-day postoperative).Primary outcome30-day mortality. Multivariate modelling was performed to identify factors associated with 30-day mortality.ResultsThis study reports included 1063 patients from 174 hospitals in 19 countries. Overall 30-day mortality was 29.4% (313/1063). In an adjusted model, 30-day mortality was associated with male gender (OR 2.29, 95% CI 1.68 to 3.13, p<0.001), age >80 years (OR 1.60, 95% CI 1.1 to 2.31, p=0.013), preoperative diagnosis of dementia (OR 1.57, 95% CI 1.15 to 2.16, p=0.005), kidney disease (OR 1.73, 95% CI 1.18 to 2.55, p=0.005) and congestive heart failure (OR 1.62, 95% CI 1.06 to 2.48, p=0.025). Mortality at 30 days was lower in patients with a preoperative diagnosis of SARS-CoV-2 (OR 0.6, 95% CI 0.6 (0.42 to 0.85), p=0.004). There was no difference in mortality in patients with an increase to delay in surgery (p=0.220) or type of anaesthetic given (p=0.787).ConclusionsPatients undergoing surgery for a proximal femoral fracture with a perioperative infection of SARS-CoV-2 have a high rate of mortality. This study would support the need for providing these patients with individualised medical and anaesthetic care, including medical optimisation before theatre. Careful preoperative counselling is needed for those with a proximal femoral fracture and SARS-CoV-2, especially those in the highest risk groups.Trial registration numberNCT04323644
|
|
| 10. |
- Kokkonen, Mikko, et al.
(författare)
-
Advanced research trends in dye-sensitized solar cells
- 2021
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 9:17, s. 10527-10545
-
Forskningsöversikt (refereegranskat)abstract
- Dye-sensitized solar cells (DSSCs) are an efficient photovoltaic technology for powering electronic applications such as wireless sensors with indoor light. Their low cost and abundant materials, as well as their capability to be manufactured as thin and light-weight flexible solar modules highlight their potential for economic indoor photovoltaics. However, their fabrication methods must be scaled to industrial manufacturing with high photovoltaic efficiency and performance stability under typical indoor conditions. This paper reviews the recent progress in DSSC research towards this goal through the development of new device structures, alternative redox shuttles, solid-state hole conductors, TiO2 photoelectrodes, catalyst materials, and sealing techniques. We discuss how each functional component of a DSSC has been improved with these new materials and fabrication techniques. In addition, we propose a scalable cell fabrication process that integrates these developments to a new monolithic cell design based on several features including inkjet and screen printing of the dye, a solid state hole conductor, PEDOT contact, compact TiO2, mesoporous TiO2, carbon nanotubes counter electrode, epoxy encapsulation layers and silver conductors. Finally, we discuss the need to design new stability testing protocols to assess the probable deployment of DSSCs in portable electronics and internet-of-things devices.
|
|
| 11. |
- Mubeen, Iqra, et al.
(författare)
-
Formulation of Modified-Release Bilayer Tablets of Atorvastatin and Ezetimibe : An In-Vitro and In-Vivo Analysis
- 2022
-
Ingår i: Polymers. - : MDPI AG. - 2073-4360. ; 14:18
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of this work was to formulate co-loaded bilayer tablets containing ezetimibe (EZB) and atorvastatin (ATC). ATC loaded in the immediate-release (IR) layer is an HMG CoA reductase inhibitor, while EZB, added in the sustained-release (SR) layer, is a lipid-lowering agent. This study was conducted to evaluate the effects of polymer on the formulation and characterization of bilayer tablets, as well as the therapeutic impact of the concurrent use of both drugs having a sequential release pattern. To obtain the optimized results, four different formulations with variable compositions were developed and evaluated for different parameters. The drug release studies were carried out using a type II dissolution apparatus, using phosphate buffer solution (PBS) of 1.2 pH for IR of EZB for an initial 2 h, followed by 24 h studies for ATC in PBS 6.8 pH. The IR layer showed rapid drug release (96%) in 2 h, while 80% of the ATC was released in 24 h from the SR layer. Locally obtained, 6-week-old female albino rats were selected for in vivo studies. Both preventive and curative models were applied to check the effects of the drug combination on the lipid profile, atherosclerosis and physiology of different organs. Studies have shown that the administration of both drugs with different release patterns has a better therapeutic effect (p < 0.05), both in preventing and in curing hyperlipidemia. Conclusively, through the sequential release of ATC and EZB, a better therapeutic response could be obtained.
|
|
| 12. |
- Muzaffar, Nimra, et al.
(författare)
-
Designing of VCuS@MXene nanocomposite electrode for energy storage device and electrochemical glucose sensor
- 2024
-
Ingår i: Journal of materials science. Materials in electronics. - : Springer Nature. - 0957-4522 .- 1573-482X. ; 35:9
-
Tidskriftsartikel (refereegranskat)abstract
- MXene, a two-dimensional (2D) material composed of transition metal carbides (TMCs) and nitrides, have fascinated substantial scientific interest. This increased interest results from their exceptional properties, which include extraordinary conductivity, transparency, outstanding absorbing capacity, and significant charge storage capacities. In this work, the MXene-doped vanadium copper sulfide (VCuS) was synthesized through the hydrothermal method. In three electrode measurement system, the VCuS/MXene composite electrode showed exhibited a specific capacity (Qs) of 1620 Cg−1. As application point of view, the hybrid device is designed and measured the electrochemical properties. The hybrid device showed the remarkable Qs of 1528 C.g−1, power density (Pd) of 2347 Wkg−1 and an energy density (Ed) of 34.99 Whkg−1. Further, the VCuS/MXene//AC device is measured up to 6000 cycles to check the stability and durability. The device showed the capacity retention (CR) of 88.5% and a high Coulombic efficiency of 82.6%. Additionally, the VCuS/MXene electrode material is utilized as an electrochemical glucose sensor for the precise detection of H2O2 down to a minimal concentration of H2O2/mm, exhibiting exceptional precision. The use of multifunctional VCuS/MXene nanocomposite electrode material presents novel possibilities for the construction of hybrid energy harvesting systems.
|
|
| 13. |
- Zarei, Ahmad, et al.
(författare)
-
Experimental investigation of the heat transfer from the helical coil heat exchanger using bubble injection for cold thermal energy storage system
- 2022
-
Ingår i: Applied Thermal Engineering. - : Elsevier BV. - 1359-4311 .- 1873-5606. ; 200
-
Tidskriftsartikel (refereegranskat)abstract
- This study investigates cold thermal energy storage (CTES) using a helical coil heat exchanger modified with bubble injection. One of the effective methods for increasing the heat transfer rate in heat exchangers is using bubble injection. A helical coil heat exchanger is immersed inside a cylindrical water storage tank, where the helical coil is the evaporator of a vapor compression refrigeration cycle (VCRC) and provides the designed cooling. Experimental studies were carried out to examine the impact of bubble injection on Nusselt number, the temperature differences in the storage tank, exergy degradation in the evaporator, and cycle coefficient of performance (COP). The bubbles were injected from the bottom of the storage tank in four different geometries at airflow rates ranging from 3 to 11 L/min. The experimental results of this study revealed that bubble injection could significantly increase the COP and heat transfer rate from the storage tank, as well as the exergy destruction and Nusselt number (Nu). This increase was highly dependent on the geometry and flow rate of the bubble injection. The results also indicated that the bubble injection has an optimal flow rate value, which was 9 L/min in this study. More specifically, the COP of the refrigeration cycle and the Nu number increased by 124% and 452%, respectively, compared to the non-bubble injection mode. Finally, for calculating the outside Nusselt number of the helical coil, an empirical correlation as a function of bubble flow rate and bubble injection angle was proposed.
|
|
| 14. |
- Bravo, L, et al.
(författare)
-
- 2021
-
swepub:Mat__t
|
|
| 15. |
- Tabiri, S, et al.
(författare)
-
- 2021
-
swepub:Mat__t
|
|
