| 1. |
- Joffrin, E., et al.
(författare)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
| 2. |
- Abel, I, et al.
(författare)
-
Overview of the JET results with the ITER-like wall
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10, s. 104002-
-
Tidskriftsartikel (refereegranskat)abstract
- Following the completion in May 2011 of the shutdown for the installation of the beryllium wall and the tungsten divertor, the first set of JET campaigns have addressed the investigation of the retention properties and the development of operational scenarios with the new plasma-facing materials. The large reduction in the carbon content (more than a factor ten) led to a much lower Z(eff) (1.2-1.4) during L- and H-mode plasmas, and radiation during the burn-through phase of the plasma initiation with the consequence that breakdown failures are almost absent. Gas balance experiments have shown that the fuel retention rate with the new wall is substantially reduced with respect to the C wall. The re-establishment of the baseline H-mode and hybrid scenarios compatible with the new wall has required an optimization of the control of metallic impurity sources and heat loads. Stable type-I ELMy H-mode regimes with H-98,H-y2 close to 1 and beta(N) similar to 1.6 have been achieved using gas injection. ELM frequency is a key factor for the control of the metallic impurity accumulation. Pedestal temperatures tend to be lower with the new wall, leading to reduced confinement, but nitrogen seeding restores high pedestal temperatures and confinement. Compared with the carbon wall, major disruptions with the new wall show a lower radiated power and a slower current quench. The higher heat loads on Be wall plasma-facing components due to lower radiation made the routine use of massive gas injection for disruption mitigation essential.
|
|
| 3. |
- Romanelli, F, et al.
(författare)
-
Overview of the JET results
- 2011
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 51:9
-
Tidskriftsartikel (refereegranskat)abstract
- Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. © 2011 IAEA, Vienna.
|
|
| 4. |
- Bombarda, F., et al.
(författare)
-
Runaway electron beam control
- 2019
-
Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 61:1
-
Tidskriftsartikel (refereegranskat)
|
|
| 5. |
- Krasilnikov, A., et al.
(författare)
-
Evidence of 9 Be + p nuclear reactions during 2ω CH and hydrogen minority ICRH in JET-ILW hydrogen and deuterium plasmas
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:2
-
Tidskriftsartikel (refereegranskat)abstract
- The intensity of 9Be + p nuclear fusion reactions was experimentally studied during second harmonic (2ω CH) ion-cyclotron resonance heating (ICRH) and further analyzed during fundamental hydrogen minority ICRH of JET-ILW hydrogen and deuterium plasmas. In relatively low-density plasmas with a high ICRH power, a population of fast H+ ions was created and measured by neutral particle analyzers. Primary and secondary nuclear reaction products, due to 9Be + p interaction, were observed with fast ion loss detectors, γ-ray spectrometers and neutron flux monitors and spectrometers. The possibility of using 9Be(p, d)2α and 9Be(p, α)6Li nuclear reactions to create a population of fast alpha particles and study their behaviour in non-active stage of ITER operation is discussed in the paper.
|
|
| 6. |
- Murari, A., et al.
(författare)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
Ingår i: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
| 7. |
- Meyer, H., et al.
(författare)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Tidskriftsartikel (refereegranskat)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 8. |
- Meyer, H., et al.
(författare)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Tidskriftsartikel (refereegranskat)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 9. |
- Blach, S., et al.
(författare)
-
Global change in hepatitis C virus prevalence and cascade of care between 2015 and 2020: a modelling study
- 2022
-
Ingår i: Lancet Gastroenterology & Hepatology. - : Elsevier BV. - 2468-1253. ; 7:5, s. 396-415
-
Tidskriftsartikel (refereegranskat)abstract
- Background Since the release of the first global hepatitis elimination targets in 2016, and until the COVID-19 pandemic started in early 2020, many countries and territories were making progress toward hepatitis C virus (HCV) elimination. This study aims to evaluate HCV burden in 2020, and forecast HCV burden by 2030 given current trends. Methods This analysis includes a literature review, Delphi process, and mathematical modelling to estimate HCV prevalence (viraemic infection, defined as HCV RNA-positive cases) and the cascade of care among people of all ages (age =0 years from birth) for the period between Jan 1, 2015, and Dec 31, 2030. Epidemiological data were collected from published sources and grey literature (including government reports and personal communications) and were validated among country and territory experts. A Markov model was used to forecast disease burden and cascade of care from 1950 to 2050 for countries and territories with data. Model outcomes were extracted from 2015 to 2030 to calculate population-weighted regional averages, which were used for countries or territories without data. Regional and global estimates of HCV prevalence, cascade of care, and disease burden were calculated based on 235 countries and territories. Findings Models were built for 110 countries or territories: 83 were approved by local experts and 27 were based on published data alone. Using data from these models, plus population-weighted regional averages for countries and territories without models (n=125), we estimated a global prevalence of viraemic HCV infection of 0.7% (95% UI 0.7-0.9), corresponding to 56.8 million (95% UI 55.2-67.8) infections, on Jan 1, 2020. This number represents a decrease of 6.8 million viraemic infections from a 2015 (beginning of year) prevalence estimate of 63.6 million (61.8-75.8) infections (0.9% [0.8-1.0] prevalence). By the end of 2020, an estimated 12.9 million (12.5-15.4) people were living with a diagnosed viraemic infection. In 2020, an estimated 641 000 (623 000-765 000) patients initiated treatment. Interpretation At the beginning of 2020, there were an estimated 56.8 million viraemic HCV infections globally. Although this number represents a decrease from 2015, our forecasts suggest we are not currently on track to achieve global elimination targets by 2030. As countries recover from COVID-19, these findings can help refocus efforts aimed at HCV elimination. Copyright (C) 2022 Elsevier Ltd. All rights reserved.
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
- Litaudon, X., et al.
(författare)
-
14 MeV calibration of JET neutron detectors-phase 1: Calibration and characterization of the neutron source
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:2
-
Tidskriftsartikel (refereegranskat)abstract
- In view of the planned DT operations at JET, a calibration of the JET neutron monitors at 14 MeV neutron energy is needed using a 14 MeV neutron generator deployed inside the vacuum vessel by the JET remote handling system. The target accuracy of this calibration is 10% as also required by ITER, where a precise neutron yield measurement is important, e.g. for tritium accountancy. To achieve this accuracy, the 14 MeV neutron generator selected as the calibration source has been fully characterised and calibrated prior to the in-vessel calibration of the JET monitors. This paper describes the measurements performed using different types of neutron detectors, spectrometers, calibrated long counters and activation foils which allowed us to obtain the neutron emission rate and the anisotropy of the neutron generator, i.e.The neutron flux and energy spectrum dependence on emission angle, and to derive the absolute emission rate in 4π sr. The use of high resolution diamond spectrometers made it possible to resolve the complex features of the neutron energy spectra resulting from the mixed D/T beam ions reacting with the D/T nuclei present in the neutron generator target. As the neutron generator is not a stable neutron source, several monitoring detectors were attached to it by means of an ad hoc mechanical structure to continuously monitor the neutron emission rate during the in-vessel calibration. These monitoring detectors, two diamond diodes and activation foils, have been calibrated in terms of neutrons/counts within ± 5% total uncertainty. A neutron source routine has been developed, able to produce the neutron spectra resulting from all possible reactions occurring with the D/T ions in the beam impinging on the Ti D/T target. The neutron energy spectra calculated by combining the source routine with a MCNP model of the neutron generator have been validated by the measurements. These numerical tools will be key in analysing the results from the in-vessel calibration and to derive the response of the JET neutron detectors to DT plasma neutrons starting from the response to the generator neutrons, and taking into account all the calibration circumstances.
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
- Orešič, Matej, 1967-, et al.
(författare)
-
Metabolome in progression to Alzheimer's disease
- 2011
-
Ingår i: Translational Psychiatry. - New York : Nature Publishing Group. - 2158-3188. ; 1
-
Tidskriftsartikel (refereegranskat)abstract
- Mild cognitive impairment (MCI) is considered as a transition phase between normal aging and Alzheimer's disease (AD). MCI confers an increased risk of developing AD, although the state is heterogeneous with several possible outcomes, including even improvement back to normal cognition. We sought to determine the serum metabolomic profiles associated with progression to and diagnosis of AD in a prospective study. At the baseline assessment, the subjects enrolled in the study were classified into three diagnostic groups: healthy controls (n=46), MCI (n=143) and AD (n=47). Among the MCI subjects, 52 progressed to AD in the follow-up. Comprehensive metabolomics approach was applied to analyze baseline serum samples and to associate the metabolite profiles with the diagnosis at baseline and in the follow-up. At baseline, AD patients were characterized by diminished ether phospholipids, phosphatidylcholines, sphingomyelins and sterols. A molecular signature comprising three metabolites was identified, which was predictive of progression to AD in the follow-up. The major contributor to the predictive model was 2,4-dihydroxybutanoic acid, which was upregulated in AD progressors (P=0.0048), indicating potential involvement of hypoxia in the early AD pathogenesis. This was supported by the pathway analysis of metabolomics data, which identified upregulation of pentose phosphate pathway in patients who later progressed to AD. Together, our findings primarily implicate hypoxia, oxidative stress, as well as membrane lipid remodeling in progression to AD. Establishment of pathogenic relevance of predictive biomarkers such as ours may not only facilitate early diagnosis, but may also help identify new therapeutic avenues.
|
|
| 18. |
- Purhonen, J., et al.
(författare)
-
A spontaneous mitonuclear epistasis converging on Rieske Fe-S protein exacerbates complex III deficiency in mice
- 2020
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- We previously observed an unexpected fivefold (35 vs. 200 days) difference in the survival of respiratory chain complex III (CIII) deficient Bcs1/(p.S78G) mice between two congenic backgrounds. Here, we identify a spontaneous homoplasmic mtDNA variant (m.G14904A, mt-Cyb(p.D254N)), affecting the CIII subunit cytochrome b (MT-CYB), in the background with short survival. We utilize maternal inheritance of mtDNA to confirm this as the causative variant and show that it further decreases the low CIII activity in Bcs1/(p.S78G) tissues to below survival threshold by 35 days of age. Molecular dynamics simulations predict D254N to restrict the flexibility of MT-CYB ef loop, potentially affecting RISP dynamics. In Rhodobacter cytochrome bc(1) complex the equivalent substitution causes a kinetics defect with longer occupancy of RISP head domain towards the quinol oxidation site. These findings represent a unique case of spontaneous mitonuclear epistasis and highlight the role of mtDNA variation as modifier of mitochondrial disease phenotypes.
|
|
| 19. |
- Serikova, Svetlana, et al.
(författare)
-
High riverine CO2 emissions at the permafrost boundary of Western Siberia
- 2018
-
Ingår i: Nature Geoscience. - : Nature Publishing Group. - 1752-0894 .- 1752-0908. ; 11:11, s. 825-
-
Tidskriftsartikel (refereegranskat)abstract
- The fate of the vast stocks of organic carbon stored in permafrost of the Western Siberian Lowland, the world's largest peat-land, is uncertain. Specifically, the amount of greenhouse gas emissions from rivers in the region is unknown. Here we present estimates of annual CO2 emissions from 58 rivers across all permafrost zones of the Western Siberian Lowland, between 56 and 67 degrees N. We find that emissions peak at the permafrost boundary, and decrease where permafrost is more prevalent and in colder climatic conditions. River CO2 emissions were high, and on average two times greater than downstream carbon export. We suggest that high emissions and emission/export ratios are a result of warm temperatures and the long transit times of river water. We show that rivers in the Western Siberian Lowland play an important role in the carbon cycle by degassing terrestrial carbon before its transport to the Arctic Ocean, and suggest that changes in both temperature and precipitation are important for understanding and predicting high-latitude river CO2 emissions in a changing climate.
|
|
| 20. |
- Wang, J., et al.
(författare)
-
Final report of the CCQM-K145 : Toxic and essential elements in bovine liver
- 2020
-
Ingår i: Metrologia. - : IOP Publishing Ltd. - 0026-1394 .- 1681-7575. ; 57:1 A
-
Tidskriftsartikel (refereegranskat)abstract
- Liver plays a major role in metabolism and acts as a source of energy for the body by storing glycogen. With the growing interest and investigation in the biological effects in recent years, it is important and necessary to develop accurate and comparable analytical methods for elements in bio-samples. It has, however, been 10 years since the tissue sample (bovine liver) of CCQM-K49 key comparison. The purpose of CCQM-K145 is to ensure the comparable and traceable measurement results for essential and toxic elements such as P, S, Zn, Mn, Ni, Mo, Sr, Cr, Co, Pb, As and Hg in bovine liver among NMIs and other designated measurement bodies worldwide. The comparison was agreed by IAWG as 6th IAWG Benchmarking Exercise with Zn and Ni as exemplary elements at the meeting in Korea in the early October 2016. The results of CCQM-K145 are expected to cover the measurement capability and support CMCs claiming for inorganic elements in the similar biological tissue materials and food samples. 30 NMIs and DIs registered in CCQM-K145. With respect to the methodology, a variety of techniques such as IDMS, ICP-OES, ICP-MS(non-ID), AAS and NAA were adopted by the participants. For Zn, Ni, Sr, Pb and Hg measurements, most participants chose ID-ICP-MS method, which showed the better performance in terms of consistency and reliability of the measurement results. In aspect of the traceability for the measurement results in CCQM-K145, most participants used their own (in house) CRMs or other NMI's CRMs to guarantee trace to SI unit. Most participants used similar matrix CRMs for quality control or method validation. Base on different statistic way to calculate the reference mass fraction values and associated uncertainties for each measurand, removal of the suspected extreme values, and discussion at the IAWG meetings, the median values are proposed as the KCRV for Zn, Ni, Mn, Mo, Cr, Pb and Hg; the arithmetic mean values are proposed as the KCRV for P, S, Sr, Co and As. In general, the performances of the majority of CCQM-K145 participants are very good, illustrating their measurement capabilities for Zn, Ni, P, S, Mn, Mo, Sr, Cr, As, Co, Pb and Hg in a complex biological tissue matrix. Bovine liver contains many kinds of nutrients and microelements, it can be regarded as a typical representative material of biological tissue and food. In CCQM-K145, the analytes involved alkali metals and transition elements, metalloids/semi-metals and non metals with a range of mass fraction from mg/g to μg/kg. CCQM-K145 also tested the ability of NMIs/DIs to determine elements that were easy to be lost and polluted, and interfered significantly. The chemical pretreatment methods of samples used in the comparison is suitable for general food and biological matrix samples. A variety of measurement methods used in the comparison represent the main instrumental technology for elemental analysis. Therefore, for supporting CMC claim, CCQM-K145 is readily applicable to measurement of more elements in a wide range of biological materials (including liquids and solids) and meat products. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
|
|
| 21. |
|
|
| 22. |
- Cudkowicz, Merit, et al.
(författare)
-
Safety and efficacy of oral levosimendan in people with amyotrophic lateral sclerosis (the REFALS study) : a randomised, double-blind, placebo-controlled phase 3 trial
- 2021
-
Ingår i: Lancet Neurology. - : Elsevier. - 1474-4422 .- 1474-4465. ; 20:10, s. 821-831
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: There is an urgent unmet need for new therapies in amyotrophic lateral sclerosis. In a clinical study with healthy volunteers, levosimendan, a calcium sensitiser, was shown to improve neuromechanical efficiency and contractile function of the human diaphragm. We aimed to evaluate the safety and efficacy of oral levosimendan in people with amyotrophic lateral sclerosis, with a focus on respiratory function.METHODS: The REFALS study is a randomised, double-blind, placebo-controlled phase 3 trial at 99 amyotrophic lateral sclerosis specialist centres in 14 countries worldwide. People with amyotrophic lateral sclerosis were eligible for participation if they were at least 18 years of age and had a sitting slow vital capacity (SVC) of 60-90% predicted. Participants were randomly assigned (2:1) by interactive web-response system to receive either levosimendan or placebo. The capsules for oral administration were identical in appearance to maintain blinding of participants and investigators. The primary endpoint was the change from baseline in supine SVC at 12 weeks, assessed as the percentage of predicted normal sitting SVC. The key secondary endpoint was the combined assessment of function and survival (CAFS) up to 48 weeks. Analyses were done in the intention-to-treat population, comprising all participants who were randomly assigned. This trial is registered at ClinicalTrials.gov (NCT03505021) and has been completed. An extension study (REFALS-ES; NCT03948178) has also been completed, but will be reported separately.FINDINGS: Between June 21, 2018, and June 28, 2019, 871 people were screened for the study, of whom 496 were randomly assigned either levosimendan (n=329) or placebo (n=167). Participants were followed up between June 27, 2018 and June 26, 2020, for a median duration of 50·1 (IQR 37·5-51·1) weeks. The median duration of treatment was 47·9 (IQR 26·4-48·1) weeks. Change from baseline in supine SVC at 12 weeks was -6·73% with levosimendan and -6·99% with placebo, with no significant difference between the treatments (estimated treatment difference 0·26%, 95% CI -2·03 to 2·55, p=0·83). Similarly, at week 48, CAFS did not differ between treatment groups (least squares mean change from baseline 10·69, 95% CI -15·74 to 37·12; nominal p value=0·43). The most frequent adverse events were increased heart rate (106 [33%] of 326 receiving levosimendan vs 12 [7%] of 166 receiving placebo), fall (85 [26%] vs 48 [29%]), headache (93 [29%] vs 36 [22%]), and dyspnoea (59 [18%] vs 32 [19%]). 33 (10%) participants allocated levosimendan and 20 (12%) assigned placebo died during the trial, mainly due to respiratory failure or progression of amyotrophic lateral sclerosis.INTERPRETATION: Levosimendan was not superior to placebo in maintaining respiratory function in a broad population with amyotrophic lateral sclerosis. Although levosimendan was generally well tolerated, increased heart rate and headache occurred more frequently with levosimendan than with placebo. The possibility of a clinically relevant subgroup of responsive individuals requires further evaluation.FUNDING: Orion Corporation.
|
|
| 23. |
- Gu, Y, et al.
(författare)
-
Quick Hot Shot & Young Surgeon Presentation
- 2015
-
Ingår i: Hernia : the journal of hernias and abdominal wall surgery. - 1248-9204. ; 19 Suppl 1, s. S77-84
-
Tidskriftsartikel (refereegranskat)
|
|
| 24. |
|
|
| 25. |
- Huang, Yuqing, et al.
(författare)
-
Tuneable Nonlinear Spin Response in a Nonmagnetic Semiconductor
- 2023
-
Ingår i: Physical Review Applied. - : AMER PHYSICAL SOC. - 2331-7019. ; 19:6
-
Tidskriftsartikel (refereegranskat)abstract
- Nonlinear effects and dynamics are found in a wide range of research fields. In magnetic materials, nonlinear spin dynamics enables ultrafast manipulation of spin, which promises high-speed nonvolatile information processing and storage for future spintronic applications. However, a nonlinear spin response is not yet demonstrated in a nonmagnetic material that lacks strong magnetic interactions. Dilute nitride III-V materials, e.g., (Ga, N)As, have the ability to amplify the conduction-electron-spin polarization by filtering out minority spins via spin-polarized defect states at room temperature. Here, by employing coupled rate equations, we theoretically demonstrate the emergence of a nonlinear spin response in such a defect-enabled room-temperature spin amplifier. Furthermore, we showcase the proposed spin nonlinearity in a (Ga, N)As-InAs quantum dot (QD) coupled all-semiconductor nanostructure, by measuring the higher-harmonic generation, which converts the modulation of excitation polarization into the second-, third-, and fourth-order harmonic oscillations of the QDs photoluminescence intensity and polarization. The observed spin nonlinearity originates from defect-mediated spin-dependent recombination, which can be conveniently tuned with an external magnetic field and can potentially operate at a speed exceeding 1 GHz. The demonstrated spin nonlinearity could pave the way for nonlinear spintronic and optospintronic device applications based on nonmagnetic semiconductors with simultaneously achievable high operation speed and nonlinear response.
|
|
