| 1. |
- Maróti, Zoltán, et al.
(författare)
-
The genetic origin of Huns, Avars, and conquering Hungarians
- 2022
-
Ingår i: Current Biology. - : Elsevier BV. - 0960-9822 .- 1879-0445. ; 32:13, s. 2858-2870, 2858–2870.e1–e7
-
Tidskriftsartikel (refereegranskat)abstract
- Huns, Avars, and conquering Hungarians were migration-period nomadic tribal confederations that arrived in three successive waves in the Carpathian Basin between the 5th and 9th centuries. Based on the historical data, each of these groups are thought to have arrived from Asia, although their exact origin and relation to other ancient and modern populations have been debated. Recently, hundreds of ancient genomes were analyzed from Central Asia, Mongolia, and China, from which we aimed to identify putative source populations for the above-mentioned groups. In this study, we have sequenced 9 Hun, 143 Avar, and 113 Hungarian conquest period samples and identified three core populations, representing immigrants from each period with no recent European ancestry. Our results reveal that this “immigrant core” of both Huns and Avars likely originated in present day Mongolia, and their origin can be traced back to Xiongnus (Asian Huns), as suggested by several historians. On the other hand, the “immigrant core” of the conquering Hungarians derived from an earlier admixture of Mansis, early Sarmatians, and descendants of late Xiongnus. We have also shown that a common “proto-Ugric” gene pool appeared in the Bronze Age from the admixture of Mezhovskaya and Nganasan people, supporting genetic and linguistic data. In addition, we detected shared Hun-related ancestry in numerous Avar and Hungarian conquest period genetic outliers, indicating a genetic link between these successive nomadic groups. Aside from the immigrant core groups, we identified that the majority of the individuals from each period were local residents harboring “native European” ancestry.
|
|
| 2. |
|
|
| 3. |
- Arvidsson, Inger, et al.
(författare)
-
Discrepancies in pain presentation caused by adverse psychosocial conditions as compared to pain due to high physical workload?
- 2012
-
Ingår i: Work: A Journal of Prevention, Assessment & Rehabilitation. - 1875-9270. ; 41, s. 2472-2475
-
Tidskriftsartikel (refereegranskat)abstract
- Disorders in the musculoskeletal system have been associated with a high physical workload as well as psychosocial and individual factors. It is however not obvious which of these factors that is most important to prevent. Musculoskeletal disorders in neck and upper extremity was assessed by interview and clinical examination in 79 teachers and 93 assisting nurses, all females. Psychosocial work environment was assessed by questionnaire. The physical workload was recorded by technical measurements of postures, movements and muscular load, in 9 teachers and 12 nurses. The physical workload was lower among the teachers, but they had a more demanding psychosocial work environment. Among the nurses, but not in the teachers, the neck-shoulder disorders were associated with a high body mass index (BMI). The teachers reported neck-shoulder complaints to a higher extent than the nurses, but had much lower prevalence of diagnoses in the clinical examination (12% vs. 25%; POR 0.3 CI 0.1 - 1.2; adjusted for age and BMI). The results suggest that adverse psychosocial conditions among the teachers give rise to a different kind of pain in the neck-shoulder region than from physical overload, troublesome but not as severe as the one afflicting the nurses.
|
|
| 4. |
- Arvidsson, Inger, et al.
(författare)
-
Rationalization in meat cutting - Consequences on physical workload.
- 2012
-
Ingår i: Applied Ergonomics. - : Elsevier BV. - 1872-9126 .- 0003-6870. ; 43:6, s. 1026-1032
-
Tidskriftsartikel (refereegranskat)abstract
- Meat cutting is associated with several ergonomic risk factors and a high risk of musculoskeletal disorders. The development of new production systems points to an increased degree of mechanization; instead of subdividing split carcasses of pigs with a knife, the halves are trisected by an electrical saw into 'sixth-parts', resulting in shorter work cycles for the workers. Recently, machine-directed line-production systems have been implemented. This study evaluates differences in the physical workload between the production systems. The postures and movements (inclinometry and goniometry) and muscular load (electromyography) of workers in the split-carcass- (five subjects), sixth-part- (ten) and line-production systems (five) were recorded. Most measures showed a statistically significant trend of declining physical exposure with increasing degrees of mechanization. For example, movement velocities of the upper arm were higher in the split-carcass system (50th percentile: mean 209°/s) than in the sixth-part (103°/s) and line production (81°/s). However, the latter two were not statistically significantly different. A novel method for quantifying posture variation, based on inclinometry, showed that the split-carcass system implied the highest variation of the upper arm postures "within-minute" (i.e., a high range of motion each minute), but the lowest "between-minute" (i.e., a low variation during the course of the workday). In conclusion, the physical workload in the line-production system was significantly lower than in the split-carcass one, and tended also to be lower than in the sixth-part system. However, there may be disadvantages in line production, such as machine-directed work pace and shorter work cycles.
|
|
| 5. |
- Balogh, Istvan, et al.
(författare)
-
Analysis of Gas6 in Human Platelets and Plasma.
- 2005
-
Ingår i: Arteriosclerosis, Thrombosis and Vascular Biology. - 1524-4636. ; 25:6, s. 1280-1286
-
Tidskriftsartikel (refereegranskat)abstract
- Objective - Gas6 is a member of the vitamin K-dependent protein family. Gas6- deficient mice were found to be resistant to thrombosis because of defective platelet function. Mouse Gas6 was demonstrated to be present in platelets and found to be involved in platelet aggregation. The aim of this study was to investigate the presence of Gas6 in human platelets and plasma and determine its role in platelet function. Methods and Results - The presence of Gas6 in human platelets and plasma was analyzed using sensitive immunologic methods. Mass spectrometry and ELISA were used to identify and quantify Gas6 in plasma. Gas6 was demonstrated to be present in human plasma, at a concentration determined to be 13 to 23 ng/mL (0.16 to 0.28 nM). Furthermore, plasma Gas6 levels were found to be lower in patients administered with warfarin. However, Gas6 was undetectable in human platelets. Conclusions - This is the first report to identify and quantify Gas6 in human plasma. However, Gas6 protein was not detected in human platelets, suggesting that any potential platelet-specific function could be because of Gas6 from the circulation. These findings open up new directions regarding the role of Gas6 in normal and pathophysiological situations such as inflammation, autoimmune disease, thrombosis and arteriosclerosis.
|
|
| 6. |
- Balogh, Istvan
(författare)
-
Exposure assessment for the prevention of musculoskeletal disorders
- 2001
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Work-related musculoskeletal disorders of shoulder/neck are a major and increasing problem. Beside the pain, they involve high cost for the employer and society. The total expenditure for the musculoskeletal disorders of the neck and upper limb have been estimated to 0.5-2.0% of the Gross National Product (GNP) in the Nordic countries. Due to the lack of precise knowledge of exposure/response relationship, ergonomic intervention has seldom been successful. Further, the exposure comprises many different aspects to be considered. The present paper shows that the constructed exposure index, based on questionnaire from 14,555 men and women between 45 and 65 years of age in the Malmö Shoulder Neck Study (MSNS) cohort, had good psychometric properties for mechanical exposure. The index comprised 11 items, assessed on a 3-point impact scale. Musculoskeletal problems were reported on a slightly modified version of the Standardized Nordic Questionnaire. In the one year follow up, the index was a significant predictor of the development of shoulder/neck pain. Exposure to job strain (the combination of high psychological job demand and low job decision latitude) was associated with higher risk only among women. A synergistic interaction was shown between high mechanical exposure and job strain. Cleaners and office workers, two of the largest occupational groups in MSNS, with presumed high and low exposure were selected for study of influence of complaints on the self-assessed exposure. They discriminate well in both self-reported and technical measured mechanical workload. However, musculoskeletal complaints lead to higher assessed loads, in spite of lower objectively measured activities as sitting, walking and heart rate. Field methods for quantification in manual work of physical workloads on the neck and the upper limbs, were further developed. A biaxial flexible electrogoniometer was used to derive measures reflecting both static and dynamic properties of workload. With a sampling frequency of 20 Hz, calculation of movements and repetitiveness can be done with sufficient accuracy in field studies. The main error showed to bee crosstalk between flexion and deviation movements, but the results were not invalidated by that. Relative (RVE) and maximal (MVE) normalization was used to minimize variability in electromyography in a standardized work-task. High interindividual variation was obtained. The variation was smaller, but still high for values normalized to RVE. No relation between shoulder muscle activities (trapezius and infraspinatus) and work pace or disorders was observed. Wrist movements had low variance, and showed a close relation to work pace. In conclusion, the developed index, mainly reflecting postures, is a useful tool for risk assessment, but needs to be supplemented by technical measurements for successful prevention. Measurement might be biased by concurrent complaints.
|
|
| 7. |
|
|
| 8. |
- Balogh, Istvan, et al.
(författare)
-
Increasing the Degree of Automation in a Production System: Consequences for the physical workload
- 2006
-
Ingår i: International Journal of Industrial Ergonomics. - : Elsevier BV. - 1872-8219 .- 0169-8141. ; 36:4, s. 353 - 365
-
Tidskriftsartikel (refereegranskat)abstract
- In spite of the continuous development of production systems work-related musculoskeletal disorders is still a large problem. One reason might be the difficulties in quantifying the ergonomic effects of interventions. In this paper ergonomic consequences of technical and organisational changes were quantified in a plant for producing slats for parquet flooring. Muscle activity, work postures and movements were assessed for neck/shoulders and upper limb by direct technical measurements at three generations of production lines. The physical workload for 31 operators at the manual, semi-automated and automated line was derived based on all existing work tasks. The work was characterised by moderate muscular loads, the 50th percentiles being 1.2-3.8%MVE for the neck/shoulder muscles, high repetitiveness and constant movements of the hands and a high prevalence of neck/shoulder disorders. There were statistically significant differences considering exposure levels between the work tasks within each line as well as between the lines. The semi-automated line implied reduced muscular load for all muscles registered but more constrained work postures. The automated line, on the other hand, required higher skills, offered less constrained postures, lower loads and repetitiveness for the hands as well as frequent changes between different physical load levels. Relevance to industry: When designing or redesigning production systems, technical solutions are often used to obtain 'beneficial' ergonomic conditions, implying a strive for low physical workloads. However, there is a risk that this might lead to more constrained physical activities. Possibilities for job enlargement must be thoroughly utilised. © 2006 Elsevier B.V. All rights reserved.
|
|
| 9. |
|
|
| 10. |
- Balogh, Istvan, et al.
(författare)
-
Precision of measurements of physical workload during standardized manual handling part III: Goniometry of the wrists.
- 2009
-
Ingår i: Journal of Electromyography & Kinesiology. - : Elsevier BV. - 1873-5711 .- 1050-6411. ; 19:5, s. 1005-1012
-
Tidskriftsartikel (refereegranskat)abstract
- Goniometry of the wrist is a feasible method for studying wrist movements in most hand-intensive work. The precision and accuracy of the method per se is good. For the knowledge on validity of field measurements, the size of imprecision is of importance. This study evaluated this condition during standardized circumstances. Six women performed three different hand-intensive work tasks: 'materials picking', 'light assembly', and 'heavy assembly', repeated during three different days. Variance components between-days (within subjects) and between-subjects were derived for positions (flexion/extension and deviation) and movements, including angular velocities, % of time with very low velocity (<1 degrees /s), as well as repetitiveness. For positions, the average standard deviations in the three tasks were, both between-days and between-subjects, 3-4 degrees . For movements, the coefficients of variation of angular velocities were about 10% between-days, and could to a great part be explained by differences in work rate. Between-subjects variability was higher, 20-40%. The variability was larger at low velocities than at high ones. The precision of the measured positions was good, expressed as small between-days and between-subjects variability. For movements, the between-days variability was also small, while there was a larger between-subjects variability. The imprecision of goniometry is consequently lower and comparable with inclinometry but lower than for EMG.
|
|
| 11. |
- Balogh, Istvan, et al.
(författare)
-
Questionnaire-based mechanical exposure indices for large population studies--reliability, internal consistency and predictive validity
- 2001
-
Ingår i: Scandinavian Journal of Work, Environment and Health. - 0355-3140. ; 27:1, s. 41-41
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVES: This study attempts to construct valid indices for mechanical exposure of the shoulder-neck region with relation to the development of shoulder-neck pain in a 1-year perspective study of a general population. METHODS: A comprehensive questionnaire was presented to 14 556 subjects aged 45 or 65 years and repeated after 12 months. Twenty-four questions concerning positions, movements, and manual materials handling were registered on a 3-point impact scale. Musculoskeletal problems were reported on a slightly modified version of the Standardized Nordic Questionnaire for the Analysis of Musculoskeletal Symptoms. Test-retest stability after 2 weeks was calculated for 232 consecutive participants. Based on mechanistic theories, 4 exposure indices were formed. Another 5 constructs were obtained by factor analysis. RESULTS: All the indices showed good test-retest stability, and 5 of them had very good internal consistency. Due to overlaps between the indices, 2 indices stood out as having unique properties. One of them concerned mainly postures and the other dealt primarily with measured lifting. However, the latter was not related to the shoulder-neck pain outcome when adjusted for the posture index. The posture index showed an exposure-effect relationship with the outcome. The job titles implied a large degree of exposure misclassification. CONCLUSIONS: The posture index is recommended as a mechanical exposure index for analyses of interaction with other possible determinants of shoulder-neck pain (ie, psychosocial factors). The use of such an index instead of job titles in large population studies will reduce the risk of misclassification.
|
|
| 12. |
- Balogh, Istvan, et al.
(författare)
-
Self-assessed and directly measured occupational physical activities - influence of musculoskeletal complaints, age and gender
- 2004
-
Ingår i: Applied Ergonomics. - : Elsevier BV. - 1872-9126 .- 0003-6870. ; 35:1, s. 49-56
-
Tidskriftsartikel (refereegranskat)abstract
- This study compares questionnaire assessed physical activity with direct technical measurements among cleaners and office workers, stratified regarding age, gender and self-reported neck/shoulder complaints. During two full working days number of steps was recorded by a pedometer, sitting/standing positions by a posimeter and heart rate by a Sport-Tester. In addition the subjects kept a work task diary for 10 days. There were high intra-individual variations in exposure between the days. Subjects with complaints rated their exposure higher than those without, although they in fact showed lower direct measured exposure. This may imply underestimation of exposure-effect relationships. Rate of perceived exertion showed low correlation with heart rate ratio within the two occupational groups, but high, 0.64 when the two groups were combined. Age and complaints explained 31% of the variance for the cleaners.
|
|
| 13. |
- Balogh, Istvan, et al.
(författare)
-
The importance of work organization on workload and musculoskeletal health - Grocery store work as a model.
- 2016
-
Ingår i: Applied Ergonomics. - : Elsevier BV. - 1872-9126 .- 0003-6870. ; 53:Part A, s. 143-151
-
Tidskriftsartikel (refereegranskat)abstract
- We have evaluated the consequences of work organization on musculoskeletal health. Using a postal questionnaire, answered by 1600 female grocery store workers, their main work tasks were identified and four work groups were defined (cashier, picking, and delicatessen work, and a mixed group, who performed a mix of these tasks). The crude odds ratios (ORs) for neck/shoulder complaints were 1.5 (95% CI 1.0-2.2), 1.1 (0.7-1.5) and 1.6 (1.1-2.3), respectively, compared to mixed work. Adjusting for individual and psychosocial factors had no effect on these ORs. For elbows/hands, no significant differences were found. Technical measurements of the workload showed large differences between the work groups. Picking work was the most strenuous, while cashier work showed low loads. Quantitative measures of variation revealed for mixed work high between minutes variation and the highest between/within minutes variation. Combining work tasks with different physical exposure levels increases the variation and may reduce the risk of musculoskeletal complaints.
|
|
| 14. |
- Balogh, Istvan, et al.
(författare)
-
Work-related neck and upper limb disorders - Quantitative exposure-response relationships adjusted for personal characteristics and psychosocial conditions
- 2019
-
Ingår i: BMC Musculoskeletal Disorders. - : Springer Science and Business Media LLC. - 1471-2474. ; 20:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: We have previously reported quantitative exposure-response relationships between physical exposures recorded by technical methods, and complaints and diagnoses in the neck/shoulders, and the elbows/hands, based on group data. In the present study the number of workers was doubled, and information on individual factors, and psychosocial working conditions was used. Relationships between various kinds of exposure and response have been analysed in this larger and more detailed sample. Methods: The prevalence of complaints (Nordic Questionnaire) and diagnoses (clinical examination) were recorded in a number of occupational groups within which the participants had similar work tasks, 34 groups of female employees (N = 4733 women) and 17 groups of male employees (N = 1107 men). Age and other individual characteristics were recorded, as well as psychosocial work environment factors (job-content questionnaire) for most participants. Postures and velocities (inclinometry) of the head (N = 505) and right upper arm (N = 510), right wrist postures and velocities (electrogoniometry; N = 685), and muscular activity (electromyography; EMG) in the right trapezius muscle (N = 647) and forearm extensors (N = 396) were recorded in representative sub-groups. Exposure-response relationships between physical exposure and musculoskeletal disorders, adjusted for individual factors with Poisson regression were then calculated. The effect of introducing psychosocial conditions into the models was also assessed. Results: Associations were found between head velocity, trapezius activity, upper arm velocity, forearm extensor activity and wrist posture and velocity, and most neck/shoulder and elbow/hand complaints and diagnoses. Adjustment for age, other individual characteristics and psychosocial work conditions had only a limited effect on these associations. For example, the attributable fraction for tension neck syndrome among female workers with the highest quintile of trapezius activity was 58%, for carpal tunnel syndrome versus wrist velocity it was 92% in men in the highest exposure quintile. Conclusions: Based on the findings, we propose threshold limit values for upper arm and wrist velocity.
|
|
| 15. |
- Bilberg, Annelie, 1965, et al.
(författare)
-
Significantly impaired shoulder function in the first years of rheumatoid arthritis: a controlled study
- 2015
-
Ingår i: Arthritis Research & Therapy. - : Springer Science and Business Media LLC. - 1478-6354 .- 1478-6362. ; 17
-
Tidskriftsartikel (refereegranskat)abstract
- Introduction: Patients with rheumatoid arthritis (RA) risk impaired shoulder function due to the inflammatory process. The knowledge of shoulder function in the early years of the disease is limited. The aim was to compare shoulder function and activity limitation related to the shoulder-arm-hand in women with RA in early disease course compared to age-matched healthy women. Method: This controlled cross-sectional study included 103 women with rheumatoid arthritis and a reference group of 103 age-matched healthy women. The mean age was 47.1 (SD 10.0) years, the mean disease duration was 20.3 (SD 8.5) months and the mean DAS28 score was 3.8 (SD 1.4) among the patients. Participants were provided with self-reported questionnaires quantifying activity limitations. Shoulder function was assessed by isometric strength of the shoulder, shoulder-arm movement and shoulder pain. Hand-grip force was assessed and examination was made of tender and swollen joints among the patients. Results: Patients showed significantly (p < 0.0001) impaired shoulder muscle strength, shoulder-arm movement, and shoulder pain compared to the reference group. Patients shoulder muscle strength was approximately 65 % of the results observed in the reference group. Activity limitations related to the shoulder-arm-hand (DASH) were significantly (p < 0.0001) higher in the patient group compared to the reference group and indicates limitations in daily activities for the patients. Conclusion: Patients with RA were found to have significantly impaired shoulder function already 1.5 years after disease onset compared to age-matched subjects. Reduced shoulder muscle strength was found to be associated with activity limitations (DASH) implying that screening of the shoulder function, emphasising the shoulder muscle strength, should be initiated from disease onset.
|
|
| 16. |
- Bilberg, Annelie, 1965, et al.
(författare)
-
Work status in patients with early rheumatoid arthritis: emphasis on shoulder function and mechanical exposure
- 2014
-
Ingår i: Scandinavian Journal of Rheumatology. - : Informa UK Limited. - 0300-9742 .- 1502-7732. ; 43:2, s. 119-123
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives: The aim of this study was to investigate work status and associated factors in patients with early rheumatoid arthritis (RA), with the emphasis on shoulder function, work-related mechanical exposure, and activity limitations related to the shoulder-arm-hand. Method: Patients with early RA were provided with self-report questionnaires quantifying work-related mechanical exposure and activity limitations. Shoulder function (i.e. isometric muscle strength, shoulder-arm movement, and shoulder pain), hand-grip force, and number of tender and swollen joints were assessed. Results: The study comprised 135 patients (103 women and 32 men), with a mean age of 48 (SD 9.6) years, a mean disease duration of 21 (SD 9.6) months, and a mean Disease Activity Score using 28 joint counts (DAS28) of 3.7 (SD 1.4). The majority (75.6%) were working full- or part-time. Work hours correlated with work-related mechanical exposure (rs = -0.34, p < 0.001) and with physical work load (rs = 0.26, p = 0.0036). Work hours also correlated with shoulder function, that is shoulder-arm movement (rs = 0.34, p < 0.0001), shoulder strength (rs = 0.25, p = 0.0032), and activity-induced shoulder pain (rs = -0.45, p < 0.0001). Significant correlations were found between work hours and hand-grip force (rs = 0.45, p < 0.0001), activity limitations related to the shoulder-arm-hand (using the Disabilities of the Arm, Shoulder and Hand Questionnaire, DASH) (rs = -0.61, p < 0.0001), and DAS28 (rs = -0.43, p < 0.0001). DASH was found to be the only significant (p < 0.001) variable to independently explain the ability of working full-time [odds ratio (OR) 0.40, 95% confidence interval (CI) 0.29-0.55 per 10 increments, area under the receiver operating characteristic (ROC) curve (AUC) 0.81, 95% CI 0.74-0.89]. Conclusions: Work status in early RA is associated with shoulder function and activity limitations related to the shoulder-arm-hand accentuated by work-related mechanical exposure.
|
|
| 17. |
|
|
| 18. |
- Björk, Mathilda, 1977-, et al.
(författare)
-
Sick Leave Before and After Diagnosis of Rheumatoid Arthritis - A Report from the Swedish TIRA Project
- 2009
-
Ingår i: JOURNAL OF RHEUMATOLOGY. - : The Journal of Rheumatology. - 0315-162X .- 1499-2752. ; 36:6, s. 1170-1179
-
Tidskriftsartikel (refereegranskat)abstract
- Our study describes sick leave during 3 years before and 3 years after diagnosis of rheumatoid arthritis (RA) in relation to referents and identifies predictors for sick leave during the third year after diagnosis of RA.Methods.One hundred twenty patients (76% women) from the Swedish early RA study TIRA were included. Disease activity and disability were registered regularly during 3 years in TIRA. Referents were matched for sex, age, and home town. Sick leave data were obtained for patients 3 years before and 3 years after diagnosis and for the referents for the corresponding 6 years.Results.No differences were seen between patients and referents regarding sick leave during the first 2 years, whereas sick leave increased in patients 6 months before diagnosis, from 30% to 53%. During the 3 years after diagnosis, sick leave among patients was rather stable, varying between 50% and 60%, even though disability pension increased and sickness benefit decreased. Sick leave before diagnosis, disability 1 year after diagnosis, and type of work were identified as predictors for sick leave during the third year after diagnosis.Conclusion.Not surprisingly, sick leave in patients increased the year before diagnosis. Although disease activity and disability diminished after diagnosis, the patients’ sick leave remained essentially unchanged. Sick leave 3 years after diagnosis was foremost predicted by earlier sick leave, disability, and type of work.
|
|
| 19. |
- Björk, Mathilda, et al.
(författare)
-
Sick leave before and after diagnosis of rheumatoid arthritis in relation to referens : A report from the Swedish TIRA project
- 2009
-
Ingår i: Journal of Rheumatology. - : Journal of Rheumatology Publishing Co. Ltd.. - 0315-162X .- 1499-2752. ; 36:6, s. 1170-1179
-
Tidskriftsartikel (refereegranskat)abstract
- Objective. Our study describes sick leave during 3 years before and 3 years after diagnosis of rheumatoid arthritis (RA) in relation to referents and identifies predictors for sick leave during the third year after diagnosis of RA.Methods. One hundred twenty patients (76% women) from the Swedish early RA study TIRA were included. Disease activity and disability were registered regularly during 3 years in TIRA. Referents were matched for sex, age, and home town. Sick leave data were obtained for patients 3 years before and 3 years after diagnosis and for the referents for the corresponding 6 years.Results. No differences were seen between patients and referents regarding sick leave during the first 2 years, whereas sick leave increased in patients 6 months before diagnosis, from 30% to 53%. During the 3 years after diagnosis, sick leave among patients was rather stable, varying between 50% and 60%, even though disability pension increased and sickness benefit decreased. Sick leave before diagnosis, disability 1 year after diagnosis, and type of work were identified as predictors for sick leave during the third year after diagnosis.Conclusion. Not surprisingly, sick leave in patients increased the year before diagnosis. Although disease activity and disability diminished after diagnosis, the patients’ sick leave remained essentially unchanged. Sick leave 3 years after diagnosis was foremost predicted by earlier sick leave, disability, and type of work.
|
|
| 20. |
- Björkman, Anders, et al.
(författare)
-
Cortical changes in dental technicians exposed to vibrating tools.
- 2010
-
Ingår i: NeuroReport. - 1473-558X. ; 21, s. 722-726
-
Tidskriftsartikel (refereegranskat)abstract
- To study the cortical reorganization after long time exposure to hand-held vibrating tools, we investigated 10 dental technicians with sensory neuropathy after long time exposure to vibrating tools and 10 controls for cortical changes using functional magnetic resonance imaging at 3 T. The activated volumes corresponding to individual fingers in the hand area of S1 were significantly larger in the neuropathy group than in controls. Activation in the primary motor cortex did not differ significantly from controls. These changes are likely the result of cortical reorganization following long-term non-physiological sensory input and they can partly explain the symptoms seen in vibration-induced neuropathy.
|
|
| 21. |
- Gerhardsson, Lars, 1952, et al.
(författare)
-
Vascular and nerve damage in workers exposed to vibrating tools. The importance of objective measurements of exposure time.
- 2005
-
Ingår i: Applied ergonomics. - : Elsevier BV. - 0003-6870 .- 1872-9126. ; 36:1, s. 55-60
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the present study was to compare the development of vibration white fingers (VWF) in workers in relation to different ways of exposure estimation, and their relationship to the standard ISO 5349, annex A. Nineteen vibration exposed (grinding machines) male workers completed a questionnaire followed by a structured interview including questions regarding their estimated hand-held vibration exposure. Neurophysiological tests such as fractionated nerve conduction velocity in hands and arms, vibrotactile perception thresholds and temperature thresholds were determined. The subjective estimation of the mean daily exposure-time to vibrating tools was 192 min (range 18-480 min) among the workers. The estimated mean exposure time calculated from the consumption of grinding wheels was 42 min (range 18-60 min), approximately a four-fold overestimation (Wilcoxon's signed ranks test, p<0.001). Thus, objective measurements of the exposure time, related to the standard ISO 5349, which in this case were based on the consumption of grinding wheels, will in most cases give a better basis for adequate risk assessment than self-exposure assessment.
|
|
| 22. |
|
|
| 23. |
|
|
| 24. |
- Hansson, Gert-Åke, et al.
(författare)
-
Physical workload in various types of work: Part I. Wrist and forearm
- 2009
-
Ingår i: International Journal of Industrial Ergonomics. - : Elsevier BV. - 0169-8141. ; 39:1, s. 221-233
-
Tidskriftsartikel (refereegranskat)abstract
- The quantitative relationship between exposure to physical risk factors and upper extremity work-related musculoskeletal disorders (UE-WMSDs) is virtually unknown. To explore the variation, objective measurements were derived in 43 types of work (686 individuals), using goniometry for the wrists and electromyography (EMG) for the forearm extensor muscles. The variations due to work were great for wrist movements, wrist positions, muscular rest, as well as peak load, ranging 1.4-54 degrees/s (flexion velocity; 50th percentile), -30 degrees-3 degrees (flexion angle; 50th percentile), 0.2-23% of time, and 3.4-41% of maximal EMG (90th percentile), respectively. Even within work categories, e.g. "repetitive industrial", there were large variations for all measures. Hence, classification without measurements has limited value. All movement measures were highly correlated (vertical bar r(s)vertical bar=0.82-0.99), but only weakly so to positions (vertical bar r(s)vertical bar = 0.01-0.43). Muscular rest and "static load" (10th percentile), were highly correlated (r(s) = -0.92), but not associated to peak load (90th percentile; vertical bar r(s)vertical bar= 0.05 and 0.08, respectively). Most low-velocity work was accompanied by much muscular rest; however, the low velocity for mouse-intensive computer-work meant very little rest. Technical measurements are suitable as exposure measures in epidemiological studies, as well as a base for decisions about interventions. The multidimensional character of exposure - wrist movements, wrist postures, muscular recovery, and peak load - has to be considered. Relevance to industry: Direct measurements provide objective and quantitative measures of the main physical risk factors for UE-WMSDs, appropriate for estimating the risk, as well as giving priority to, and evaluating, interventions. (c) 2008 Elsevier B.V. All rights reserved.
|
|
| 25. |
- Hansson, Gert-Åke, et al.
(författare)
-
Physical workload in various types of work: Part II. Neck, shoulder and upper arm
- 2010
-
Ingår i: International Journal of Industrial Ergonomics. - : Elsevier BV. - 0169-8141. ; 40:3, s. 267-281
-
Tidskriftsartikel (refereegranskat)abstract
- To explore the correlation between, and the variation in, various measures of exposure to potential risk factors for work-related upper extremity musculoskeletal disorders (UE-WMSDs), physical workload was measured in 43 types of work (713 individuals), using inclinometry for the head and upper arms, and electromyography (EMG) for the trapezius muscles. Many exposure measures were highly correlated. Head flexion (90th percentile), extension (1st percentile), and movements (50th percentile); arm elevation (99th percentile) and movements (50th percentile); trapezius muscular rest (fraction of time) and peak load (90th percentile), constitute main exposure dimensions. The variations were large: head: flexion 9 degrees-63 degrees, extension -39 degrees-4 degrees, movements 2.3-33 degrees/s; arm: elevation 49 degrees-124 degrees, movements 3.0-103 degrees/s; trapezius: muscular rest 0.8%-52% of time, peak load 3.1%-24% of maximal EMC. Even within work categories, e.g. "repetitive industrial", there were large variations. Somewhat higher loads were recorded on the right as compared to the left side (differences: arm elevation 2, arm movements 19%; trapezius peak load 18%), but these were small compared to the differences due to work. There were high correlations between movements of arm and head (r(s) = 0.96), as well as arm and wrist (r(s) = 0.92), and between, on the one hand, trapezius muscular rest and peak load, and on the other, arm and head movements (vertical bar r(s)vertical bar = 0.47-0.62), as well as arm elevation (vertical bar r(s)vertical bar = 0.54-0.85), which has to be considered when assessing exposure-response relations. Relevance to industry: Direct measurements provide objective and quantitative data of the main physical risk factors for UE-WMSDs, appropriate for estimating the risk, as well as giving priority to and evaluating interventions. (C) 2009 Elsevier B.V. All rights reserved.
|
|
